Betreibungsamt Oberriet

Condition: used, Battenfeld BA 950 CDK Injection Molding Machine – used For sale is a pre-owned injection molding machine by manufacturer Battenfeld, model BA 950 CDK, equipped with a UNILOG 4000 control system. The machine comes from a commercial operation and is sold in the condition shown in the photos. It shows normal wear consistent with age and use. Please refer to the photos for control system and type designation. Manufacturer: Battenfeld Model: BA 950 CDK Control: UNILOG 4000 Condition: used Sale: commercial Inspection possible by appointment. Further information regarding condition, function, year of manufacture or technical specifications available upon request. Pickup only / loading by arrangement. Nsdpfx Akjy E Umcecjwf

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, screw diameter: 22 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nedpfey Ewptox Akcswf Screw diameter: 22 mm FEATURES 3-station rotary table Note: If you purchase multiple items from the same location (see offers below), you will only be charged the lower applicable costs for dismantling and loading.

Condition: used, Year of construction: 1994, Main Group Vilor injection molding machines for manufacturing plastic components; previously used for production of soles and components for footwear manufacturing; option to additionally purchase molds for shoe soles with the machines; machines were operational until the end and have been unused for 4 years; good condition, require refurbishment; Nedpfxsy Egvpj Akcewf

Year of construction: 2021, condition: used, machine/vehicle number: V51CY1021128034, Clamping force: 2,500 kN, clear column spacing: 630 mm, weight: 5,490 kg Nwodpfxey D Tx Ue Akcof

Year of construction: 2018, operating hours: 32,946 h, condition: used, machine/vehicle number: 21702113, Clamping force: 4,600 kN, clear column spacing: 810 mm, centering flange diameter: 110 mm, 1 temperature control unit Nedpfxjy D Txne Akcewf

Year of construction: 2019, condition: used, machine/vehicle number: V71CY2019087772, Clamping force: 4,000 kN, clear column spacing: 840 mm, centering flange diameter: 125 mm, 1 temperature control unit Nwedpfx Akoy D Txuscsf

Year of construction: 2019, operating hours: 24,394 h, condition: used, machine/vehicle number: 21803248, Clamping force: 2,500 kN, clear tie bar spacing: 660 mm, centering flange diameter: 110 mm, 1 temperature control unit Nwsdpey D Txzofx Akcef

Year of construction: 2019, operating hours: 30,658 h, condition: used, machine/vehicle number: 21803934, Clamping force: 2,500 kN, clear column distance: 660 mm, centring flange diameter: 110 mm, 1 temperature control unit Njdpfx Aoy D Tx Ijkcowf

Year of construction: 2004, condition: ready for operation (used), A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect. Nwjdpfoyz Anmjx Akcef

Year of construction: 1998, condition: ready for operation (used), Product material: LSR, ejector stroke: 150mm, operating pressure: 250bar, clamping force: 750kN, min. tool installation height: 250mm, opening stroke: 375mm, tie bar spacing X/Y: 320mm/320mm, max. platen dimensions X/Y: 490mm/490mm, max. injection volume: 187.5cm³, injection force: 145kN, max. injection pressure: 1150bar, screw diameter: 40mm. Machine dimensions X/Y/Z: approx. 4000mm/1850mm/2000mm, weight: approx. 3100kg. Including two dosing units. An on-site inspection is possible. Nodpfxoyx H Hhs Akcewf

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Nwjdpfeyxrt Tjx Akcof

Year of construction: 2011, condition: ready for operation (used), Clamping force: 700kN, Opening stroke: 305mm, Ejector stroke: 105mm, Ejector force: 20kN, Screw diameter: 30mm, Shot volume: 99cm³, Speed: 480rpm, Injection pressure: 1451bar, Weight: approx. 6200kg, Control system: CC200, Operating hours: 57077h. Documentation available. An on-site inspection is possible. Nwsdpfx Aoyxgqgokcsf

Year of construction: 1992, condition: ready for operation (used), An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible. Nsdpsyw Svfofx Akcewf

Year of construction: 2006, condition: ready for operation (used), Four Engel injection molding machines are available. 1) Engel ES 750/150 HL, year of manufacture: 2006, core pulls: 2, screw diameter: 55mm, shot volume: 511cm³, injection pressure: 1616bar/2052bar, nozzle stroke: 350mm, nozzle contact force: 67kN, clamping force: 1500kN, opening stroke: 606mm, ejector force: 60kN, ejector stroke: 150mm, min. mold installation height: 294mm, platen dimensions X/Y: 750mm/520mm, weight: approx. 9500kg, control system: CC100, operating hours: approx. 79000h. Including Engel HLi automation robot. 2) Engel ES 80/30 HL, year of manufacture: 1995, core pulls: 2, screw diameter: 22mm, shot volume: 38cm³, injection pressure: 1500bar/2050bar, nozzle stroke: 200mm, nozzle contact force: 28kN, clamping force: 300kN, opening stroke: 330mm, ejector force: 24kN, ejector stroke: 70mm, min. mold installation height: 110mm, platen dimensions X/Y: 550mm/380mm, weight: approx. 2500kg, control system: CC100, operating hours: approx. 113300h. 3) Engel ES 2000/250, year of manufacture: 1993, core pulls: 3, injection unit: PVC, screw diameter: 70mm, shot volume: 1154cm³, injection pressure: 1400bar/1700bar, nozzle stroke: 450mm, nozzle contact force: 150kN, clamping force: 2500kN, opening stroke: 600mm, ejector force: 70kN, ejector stroke: 200mm, min. mold installation height: 200mm, platen dimensions X/Y: 910mm/910mm, weight: approx. 16000kg, control system: CC90, operating hours: approx. 109300h. Including Wittmann W322 automation robot. 4) Engel ES 750/150 HL, year of manufacture: 1998, core pulls: 2, screw diameter: 35mm, shot volume: 135cm³, injection pressure: 1060bar/1600bar, nozzle stroke: 200mm, nozzle contact force: 28kN, clamping force: 600kN, opening stroke: 450mm, ejector force: 40kN, ejector stroke: 100mm, min. mold installation height: 150mm, platen dimensions X/Y: 600mm/560mm, weight: approx. 4700kg, control system: CC100, operating hours: approx. 108600h. Including Engel sprue picker automation robot. Documentation available. An inspection on site is possible. Nwodpsyu T D Dsfx Akcsf

Year of construction: 2008, operating hours: 78,723 h, condition: ready for operation (used), screw diameter: 25 mm, This Arburg 470 A 800-170 was manufactured in 2008. A vertical injection moulding machine with a closing force of 80 tons, operating on 400 V 3∼, 50 Hz. It features a total connected load of 69 kVA. Consider the opportunity to buy this Arburg 470 A 800-170 vertical injection moulding machine. Contact us for more information. • Operating voltage: 400 V, 3~, 50 Hz • Control voltage: 230 V, 50 Hz Nodpfjyq Rw Tsx Akcewf • Control voltage: 24 V~ • Motor/heating rated current: 72 A / 58 A • Total rated current: 130 A • Total connected load: 69 kVA • Calibration (Year): 2027 • selection unit: yes • single platen: yes • beam spacing: 470 x 470 • Optional: Geiger Handling

Year of construction: 2015, operating hours: 49,071 h, condition: ready for operation (used), overall weight: 4,400 kg, Electrical injection moulding machine manufactured in 2015. This FANUC Roboshot S100iA features a closing force of 100 tons and a screw diameter of 26 mm. With a beam spacing of 460 x 410 mm, it is designed for efficient production. If you are looking to get high-quality injection moulding capabilities, consider the FANUC Roboshot S100iA machine we have for sale. Contact us for further details. Nwjdpfx Akoyninfocjf • Clamping Force: 100t • Screw Diameter: 26mm • Power Supply: 200 V∼50/60 Hz, 220 V∼60 Hz

Year of construction: 1996, condition: ready for operation (used), Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible. Nedpfxjynat Eo Akcewf

Year of construction: 2013, operating hours: 42,681 h, condition: ready for operation (used), controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 3 units available, consider the opportunity to buy this Krauss Maffei 35-180 CX hydraulic injection moulding machine. Contact us for further details. • Plasticising Size: 180 • Plasticising Arrangement: H • Screw Diameter: 28 mm Nodpfsym Uv Ssx Akcswf • Nozzle Radius: 10 mm • Nozzle Bore: 4 mm • 3 units available

Condition: ready for operation (used), A large-format two-component injection molding machine Engel is available. Screw diameter: 120mm, metering stroke: 480mm, max. shot volume: 5430cm³, screw speed: 130rpm, L/D ratio: 20, plasticizing capacity: 132g/s, injection pressure: 1600bar, nozzle stroke: 950mm, nozzle force: 150kN, heating capacity: 80kW, pump capacity: 110kW, oil filling: 1600l, injection unit weight: 17t. Clamping force: 17000kN, opening force: 1230kN, opening stroke: 2550mm, mold installation height min./max.: 800mm/1600mm, max. platen distance: 3350mm, platen dimensions X/Y: 2640mm/2250mm, tie bar spacing X/Y: 1805mm/1405mm, tie bar diameter: 285mm, ejector stroke: 300mm, ejector force: 230kN, clamping unit weight: approx. 82t. Overall system dimensions X/Y: approx. 11500mm/7300mm, total system weight: approx. 100t. Documentation available. An on-site inspection is possible. Nwodpfx Aksymfdgjcof

Year of construction: 2011, condition: ready for operation (used), This HAITIAN MA-4700 injection moulding machine was manufactured in 2011. It offers an injection capacity of 1860 grams and a powerful injection pressure of 1850 Bar. The clamping force can reach up to 470 tons, accommodating molds with a thickness range of 320 mm to 820 mm. The distance between tie bars is 1560 mm, ensuring ample space for various mold sizes. Consider the opportunity to buy this HAITIAN MA-4700 injection moulding machine. Contact us for more information. Additional equipment • New positioners • New oil cooler • ALFA ROBOT Machine Benefits Qualitative Machine Benefits Nwedpfx Akoyll Ehscsf • Without conveyor Technical Machine Benefits • Injection capacity: 1860 g • Max. Injection pressure: 1850 bar • Diameter of screw mass: 75 mm • Max. Mold clamping force: 470 tons • Min. Mold thickness: 320 mm • Max. Mold thickness: 820 mm • Max. Distance between tie bars: 1560 mm • Diameter of central ring: 200 mm • Distance between guide rails: 840x830 mm

Year of construction: 2003, condition: ready for operation (used), Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible. Nwjdpfx Aeygw Siokcef

Year of construction: 2007, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible. Nwedpjyddzlsfx Akcsf

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible. Nwedpfxjyddzfs Akcjf

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible. Nwsdpeyddy Usfx Akcjf

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Nedpfx Ajyddy Iokcowf