Kg-Tech Grzegorz Król

Condition: used, Year of construction: 1983, pressure 160 t chamfer lenght 3100 mm distance between columns 2600 mm Center of spindle to wall or column 400 mm stroke 280 mm total power requirement 15 kW machine weight ab. 12.000 kg Iaodey Dvmhspfx Ambsr

Condition: good (used), Year of construction: 2001, functionality: fully functional, Hydraulic Press Brake Make: TRUMPF Model: TrumaBend V85S Year of manufacture: 2001 Iedpfx Aoy Dr Ibsmbear Technical details Manufacturer: Trumpf Model: TrumaBend V85 S Year: 2001 Pressing force: 85 t Bending length: 2550 mm Throat depth: 420 mm Stroke: 215 mm Dimensions: L 3.1 x W 1.80 (plus 0.5m support arms) x H 2.40 m Weight: 8.8 t Equipment - Controlled axes: Y1, Y2, X, R, Z1, Z2 - 2 movable support arms - CNC-controlled crowning - Hydraulic tool clamping (top and bottom, Trumpf system) - Pneumatic die shifting - Delem 2D graphic control - CNC-controlled crowning - Tool package: Upper tool, straight H 140mm, R 1 28°, L 2500mm, segmented Lower tool V8, 86°, H 100mm, L = 2500mm, segmented All information subject to change. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Iodpfoy Dpufjx Ambsar Model: TrumaBend V85s Capacity: 2050 x 85 tons Control: Delem DA69 Axes: Y1, Y2, X, R, Z1 and Z2 Hydraulic WILA upper and lower clamping Year of manufacture: 2005

Condition: new, Year of construction: 2026, machine/vehicle number: Cone G25_2026_1, functionality: fully functional, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 2,600 mm, bending force (max.): 80 t, warranty duration: 36 months, control type: NC control, degree of automation: manual, type of crowning: CNC-controlled, actuation type: electric, Equipment: CE marking, angle measuring system, angle stop, documentation/manual, emergency stop, european tool clamping system, finger protection, lower tooling, safety light barrier, upper tooling, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G25 Iajdpfsy A Nm Sjx Amber Pressing force: 800 kN Bending spindles: 4 Controlled axes: X-R axis (2x manual stop fingers) Standard Type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touch screen Options: - 4 or 5 axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS+ light barrier system angle measuring system - extra screen with 3D bending software - support table - Light front and rear - WILA / Trumpf / Type B - tool holder system - 2x bending aids 36 months warranty after installation

Condition: good (used), Used press brake by Donewell / Safan Iaodoy A Ey Iepfx Ambjr Model 80 3100 Capacity 3100 x 80 tons 1 set of tooling

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Hydraulic press brake LVD PPEB-EQ 80/25 CADMAN CNC Year of manufacture: 2006 Serial number: 30734 Technical specifications Pressing force: 800 kN Working length: 2,500 mm Distance between uprights: 2,050 mm Stroke: 200 mm Distance table – ram: 400 mm Iaedpfjy Avnpex Ambjr Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 11 mm/s Return speed: 115 mm/s Weight: 6,200 kg Motor: 7.5 kW Control CADMAN CNC, 6 axes • Back gauge X-mono-R-Z1-Z2 • LVD style upper tool

Condition: good (used), Year of construction: 2004, Used small press brake by Safan Type: H Brake 90 1600 TS1 Capacity: 1600 x 90 tons TS1 CNC control Iasdpfx Amjy Atwzebsr Year of manufacture: 2004 Y1, Y2, X and R axes CNC controlled Wila New Standard top clamping Wila 13 mm lower clamping (hydraulic clamping) Light curtain

Condition: excellent (used), Year of construction: 2013, Model Amada HFE MK2 80 x 2500 , 8 axis Press Brake Year 2013 Tonnage 80 tonnes Max. Bend Length 2500 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Dimensions Machine Length 3950 mm Isdpey Amd Uofx Ambear Machine Depth 2580 mm Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm distance between columns 2125 mm Iaedpfjyz Dgwex Ambsr Control OP 2000 controlled axis 7 throat 420 mm stroke 200 mm dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 80 t, control type: CNC control, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale Iaedpfx Asyzy D Ejmbjr The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Key Technical Specifications Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bending Length 2,500 mm Stroke Length 200 mm Open Height 470 mm Throat Depth 420 mm Motor Power 7.5 kW

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 90 t, Equipment: CE marking, 1 Used Morgan Rushworth year 2019 2.6metre x 90ton Downstroke Cnc pressbrake for sale Model: PBS CNC 2600/90 Year: 2019 With modern ESA touch screen cnc control Iaedpfx Asyziugembsr 4axis in total - 2 axis back gauge Euro style tooling and tool holders Upper and Lower Tooling VIDEO AVAILABLE UPON REQUEST

Condition: ready for operation (used), Year of construction: 2006, pressure 90.0 t chamfer lenght 3050 mm distance between columns 2550 mm stroke of upper beam 135 mm dayligth 180 mm throat 350 mm working feed 8.0 mm/sec return speed 68.0 mm/sec work height max. 805 mm back stop - adjustable max. 620 mm Control ENC 310 oil volume 100 l total power requirement 7.5 kW weight 5840 kg range L-W-H 4000 x 2040 x 2450 mm from a maintenance workshop very good conditions (!!) - in checked conditions - machinevideo - ?v=PIiHc2e7h28 Features: - NC electro-hydraulic press brake - with DURMA NC control "ENC 310" Ijdpfx Aoyy A H Tsmbear * Illuminated LCD display * X-axis control & value display * Y-axis control & value display - Swiveling operator panel, front left - NC controlled axes: Y1/Y2 + X - NC electro-motorized backgauge (X-axis) * with 2x manually adjustable backgauge fingers * including lateral and height adjustment (Z+R axes) - NC electro-motorized depth adjustment (Y-axis) - AMADA/PROMECAM upper tool holder * with top wedge crowning & quick-change adapter * Split deer foot upper tool (AMADA) - AMADA/PROMECAM Lower tool holder * Split 4V universal die, in die shoe - Side guard (swinging doors) - Rear guard (swinging door) - 1x freely movable foot switch - Operating instructions (PDF)

Condition: good (used), Year of construction: 2012, functionality: fully functional, Hydraulic Press Brake Manufacturer: AMADA Model: HFE M2 8025 Year: 2012 Technical Details Manufacturer: AMADA Model: HFE M2 8025, 4 AXES Year of manufacture: 2012 Pressing force: 80 t Bending length: 2,570 mm Stroke: 200 mm Distance between uprights: 2,125 mm Installation height: 470 mm Iasdpsyyykcjfx Ambjr Throat depth: 420 mm Table width: 60 mm Table height: 960 mm Approach speed: 1 – 100 mm/s Working speed: 1 – 10 mm/s Return speed: 1 – 100 mm/s Motor power: 9 kW Oil capacity: 90 L Max. pressure: 300 bar Dimensions: approx. L 3.70 x W 1.75 x H 2.55 m + 2x tool cabinets Weight: approx. 6.4 t + 2x tool cabinets with tools Features • Controlled axes: Y1, Y2, X, R • AB-PAD numerical control with touchscreen • Fissler safety laser light barrier at the front • Sheet supports at the front • 2 x tool cabinets • Large package of tools as shown in the photos • Service manuals • Documentation All information provided without guarantee. A powered demonstration at our showroom is possible at any time.

Condition: ready for operation (used), Year of construction: 1999, pressure 80.0 t chamfer lenght 2570 mm distance between columns 2125 mm column arm 420 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec stroke 200 mm dayligth 470 mm table height 960 mm Number of working hours ~ 33.100 h oil volume 90.0 l total power requirement 9.0 KW weight of the machine ca. 5750 kg. range L-W-H 3630 x 2450 x 2550 mm - in checked conditions - machinevideo - ?v=SskqZJdQxsQ Equipment: - AMADA CNC control, model OPERATEUR II * Manual control for fine adjustment of the axes - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2) - CNC-controlled backgauge adjustment (X1 X2) - CNC-controlled vertical adjustment of the fence fingers (R1 R2) - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2) - Swivel operation, front left - 1x freely movable foot switch - Top tool holder with top wedge crowning (AMADA system) - Rear safety guard (safety grid) - Side safety guard (safety doors) - CE marking - Original operating instructions * Further technical data : Adjustment range : X axis ... 700 mm X axis with workpiece in place ... 1020 mm R axis .. 250 mm Adjustment speed : Iaedpfxeyyc Dfe Amber X axis .. 500 mm/sec R axis ... 160 mm/sec Z1 Z2 axis .. 1000 mm/sec Positioning accuracy ± in mm : X axis .. 0.1 R axis .. 0.1 Z axis .. 1.0

Condition: used, Year of construction: 2005, AMADA - HFT 80-25 - 2005 - 80 t capacity - 2500 mm table - stroke 200 mm - weight 5750 kg - under power Iaedjytrwtopfx Amber - used machine, good condition

Condition: good (used), Year of construction: 2007, functionality: fully functional, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm]: 2210 Pressing force [tons]: 85 Controller: TRUMPF TASC 6000 Operating hours [h]: 90816 Hydraulics ON [h]: 57234 Standard Equipment: - Rigid machine frame in all-steel construction - Stress-relieved press beam - 4-cylinder upper drive - Block hydraulics with quiet double pump - Backgauge with CNC-controlled X and R axes - Manual upper tool clamping - Hydraulic lower tool clamping - Manual crowning - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control - Standard safety features Isdpfsytfrwex Ambear + Increased installation height/stroke +230 mm + 6-axis backgauge system + Hydraulic upper tool clamping + CNC-controlled crowning + BendGuard + 2x support consoles + Short park position (190 mm) + Rear work area lighting + Front work area lighting

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 2720 Press force [t] 85 Control unit TRUMPF TASC 6000 Operating hours [h] 45666 Hydraulics on [h] 13762 - Top drive concept in four-cylinder design Y1/Y2 - Electrohydraulic ram drive with proportional valve technology - Ram position measuring system with deflection compensation via glass scales - Modern block-type hydraulics - Spherical suspension and inclined position of the pressure beam - CNC backgauge system Iaedpfx Aeytfqmembor - Safe finger adjustment from the front - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, manual lower tool clamping - Program-controlled lower tool displacement (I-axis) for 2 positions - Flat front cover - Modern safety guard - CE mark - Oil cooler clamping device - Increased installation height - 6-axis backgauge - Hydraulic upper tool clamping - Hydraulic lower tool clamping - CNC crowning - CNC I-axis - BendGuard - ACB preparation - 2 support consoles

Condition: used, Max. Presskraft: 800 kN (80t) Max. bending length: 2500 mm Currently 5 punch brackets are installed, which can be moved (Installed tool with 4 x 12 mm hole diameter and 1 x 10 mm) Ijdpfx Amoyrnw Tjbsar No other bending prisms available

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 102300 € 1933.47 € 80 to 2550 mm 4 320 mm 2840 mm 500 mm servomotorischer Riemenan 105 mm/s 10 mm/s 105 mm/s 650 mm 250 mm 3700 mm 2200 mm 2550 mm 6400 kg Electromotor drive with multiple switched flat belt system 4 axes (Y1, Y2,X, R) CNC control DELEM DA-66S - 2D touchscreen display 17“ - 3D visualisation in simulation and production - intuitive touch-screen control (simple drawing of the bending outline with your finger) - simple and convenient data transfer - multi-simulation option - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) safety device BLVT light guard linear guided sheet support arms according to CE rules Iaodpfeynndfsx Ambsr users manual in English or German ADVANTAGES OF THIS CONCEPT: -no reduction of working width by side side columns, distance between columns is bigger as bending width - up to 30 % higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal - marginally frame deflection - now crowning necessary by spreading the force along the bending length - high repetition and bending accuracy along the bending lengt -low energy consumption -no hydraulic components Options: CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: ready for operation (used), Year of construction: 2012, operating hours: 33,318 h, pressing force: 87 t, total width: 1,800 mm, total height: 2,840 mm, overall weight: 8,300 kg, controller manufacturer: TRUMPF, controller model: TASC 6000, product length (max.): 3,020 mm, number of axes: 6, This 6s TRUMPF TruBend 5085 was manufactured in 2012. It features a press force of 850 kN and a bending length of 2,210 mm, making it suitable for various bending applications. With an operating interface of Touchpoint TruBend, it offers user-friendly operation. Consider the opportunity to buy this TRUMPF TruBend 5085 press brake. Contact us for further details. • Operating hours: Machine 33,318 h; Hydraulics 15,786 h • Clearance: 1,750 mm • Usable installation height: 385 mm (optional increased: 615 mm) • Throat depth: 420 mm • Operating interface: Touchpoint TruBend Iodpfjyhp Edjx Ambjar • Max. Y-axis speed (operating step, optional): 25 mm/s Technical Specification Bending Length 2210 mm

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 87'2294, functionality: fully functional, throat depth: 255 mm, controller model: Cybelec S-DNC-8879-PS, bending force (max.): 81 t, working length: 2,050 mm, TECHNICAL DETAILS Pressing force: 800 kN Working length: 2,050 mm Clearance between uprights: 2,050 mm Frame throat depth: 255 mm Ram stroke, working stroke: 215 mm Max. installation height: 390 mm Powered backgauge: 500 mm Working speed, pressing: 8 mm/s Working speed, return: 60 mm/s MACHINE DETAILS Control: Cybelec S-DNC-8879-PS Connection: 50 Hz 3x 380 V Motor power: 6 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,000 x 3,400 mm Machine weight: 6,700 kg EQUIPMENT Set of bending rails Iaodpfx Aeyhn H Hsmbor Set of gooseneck rails

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, stroke length: 215 mm, throat depth: 410 mm, bending force (max.): 85 t, distance between stands: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Distance between uprights: 1,750 mm Stroke: 215 mm Throat depth: 410 mm MACHINE DETAILS Control: DELEM Dimensions & Weight Machine dimensions: 2,700 x 2,100 x 2,400 mm Weight: 7,900 kg EQUIPMENT Two-hand operation 2 support arms Side safety doors Iasdpfx Aeyhmdqsmbjr Lasersafe Fissler Wila tool clamping Adjustable die position Crowning system Tool cabinet

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Isdpfoyabf Hox Ambsar

Condition: used, Year of construction: 1982, functionality: fully functional, pressing force: 90 t, stroke length: 100 mm, operating speed: 7 mm/s, reverse speed: 80 mm/s, overall weight: 5,000 kg, CNC Hydraulic Press Brake Brand: Mebusa Model: PH 90-25 Year: 1982 Weight: 5,000 kg Mebusa/Mecos control, model M202 *Capability to create programs with multiple steps. Bending length: 2,500 mm Force: 90 tonnes Axes: 2 (Y, X) Throat depth: 400 mm Stroke: 100 mm Approach speed: 45 mm/sec Working speed: 7 mm/sec Return speed: 80 mm/sec Delivered with: Iedpfx Amsx Scv Ejbsar - New four-sided mono-V die (V16 mm, V22 mm, V32 mm, and V50 mm) in 835 mm sections - Set of punch tools for 2,500 mm at 35 degrees - Various batches of Promecam punches, 90 degrees (see photos of punches on pallet)

Condition: used, Year of construction: 1984, total length: 3,500 mm, total width: 1,400 mm, total height: 2,500 mm, Weight: 6.800 kg - Year: 1984 - Documentation available: No - CE certificate present: No - Serial number: 12552 - Drive system: Teach-in - Control system brand: Delem - Control system type: DA-22 - Power [kW]: 5.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 80 - Max. working width [mm]: 3100 Iedjx R S Nropfx Amboar - Column gap [mm]: 2500 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Motor power: 5.5kW - Transport dimensions: 3500mm x 1400mm x 2500mm (l x w x h) - Transport weight [kg]: 6800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum