MHS Plast

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 166416, clamping force: 350 kN, screw diameter: 25 mm, clearance between the columns: 221 mm, injection pressure: 1,570 bar, injection weight: 41 g, mold height (min.): 150 mm, ejector force: 27,000 N, ejector stroke: 60 mm, plate length: 250 mm, plate height: 342 mm, total length: 2,800 mm, total width: 1,200 mm, total height: 1,500 mm, overall weight: 990 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Used ARBURG ALLROUNDER 221 M plastic injection moulding machine, manufactured in Germany in 1996. Compact, robust hydraulic injection moulding machine equipped with ARBURG MULTITRONICA electronic control system. Gedpfx As Ai Rxven Esui The machine is currently been used in an industrial production environment and is reported to be operational. It shows normal signs of wear consistent with its age and previous use. Instead of Machine hours, number of cycles is given: 1.221.884 cycles

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 61038744, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM • MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s Guodpfxs Ai E A Nj An Eei • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m ADDITIONAL EQUIPMENT • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 61038743, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM • MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g Godpfxo Ai E Aws An Eoui • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m ADDITIONAL EQUIPMENT • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2014, ARBURG A 370 S 700-290 U-Version (S&P 3804) Manufacture year: 2014 Operating hours: 41,257 Stunden Screw: 40 mm Injection pressure: 1530 bar Stroke volume: 188 cm³ Clamping Force: 70 t Tie bar distance: 370 x 370 mm Gsdpfx Ao Ai El Djn Ejui Mould installation height min.: 200 mm Plate distance max.: 600 mm Dimensions: 3700 x 1400 x 2000 mm Eeight: 3580 kg Connected load: 15 kW U-Version = clamping and injectionside could be turned into vertical and horizontal position, 1 x corepuller, 6 x hotrunner, Airvalve, Interface colorizing, 23.761 h automatic and 17.496 h manual... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Gjdpfo Ai Elzex An Ejui Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2007, operating hours: 98,000 h, clamping force: 80 kN, displacement volume: 61 cm³, injection pressure: 2,740 bar, overall weight: 3,900 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz Guedpfx Ane Aiv D Te Esi delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2006, Arburg 370U 600-290 (2006) CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Gujdpfxj Aid Sre An Eei Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A Clamping force: 60 t Screw diameter: 35 mm Shot weight: 132 g Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Shot volume: 144 cm3 Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 1995, operating hours: 55,000 h, functionality: fully functional, machine/vehicle number: 162573, clamping force: 800 kN, overall weight: 4,500 kg, Overall condition good. Machine was working in production until the operations were stopped. Machine is stored into a warehouse since 2024. Gusdpfs Aid R Hox An Eji Location - Estonia, Hiiumaa

Condition: used, Year of construction: 2006, Arburg 370 U 600-290 (2006) CLAMPING UNIT Clamping force: 600 kN Gsdpfx As Aid Rfsn Eoui Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: used, Year of construction: 1994, operating hours: 64,000 h, functionality: fully functional, machine/vehicle number: 160059, clamping force: 1,000 kN, overall weight: 5,000 kg, Overall condition good. Machine was used in production until the operations were stopped. It has been stored into a warehouse since 2024. Guods Aid N Tepfx An Eoi Location - Estonia, Hiiumaa

Condition: like new (used), Year of construction: 2019, operating hours: 3,123 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, Equipment: documentation/manual, Here, we offer the following well-maintained used injection molding machine for sale as part of our injection molding machine trading business. Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. ### Technical Data Manufacturer: Wittmann Type: SmartPower 60/210 Serial Number: Year of Manufacture: 2019 Operating Hours: 3,123 h Controller: Unilog B8 New Price: 75,000 euros Functionality: fully functional Condition: excellent ### Special Features Injection unit 210 Screw diameter: 35 mm Shot weight: 130 gr/PS Injection pressure: 1500 bar (increased) Injection volume: 144 ccm Clamping force: 600 kN / 60 tons Tie bar spacing: 370 x 320 (h x v) Platen dimensions: 540 x 480 mm (h x v) Tool installation height: 200 mm Maximum distance between platens: 600 mm Ejection stroke/force: 150 mm / 26.4 kN Clamping unit: hydraulic Dimensions L/W/H: 3.6 x 1.3 x 1.9 m Weight: 3100 kg ### Extras - Centralized ejector with rotating device - Injection cylinder with hard chrome plating - Highly wear-resistant plasticizing unit (up to 350 °C) - Safety guard widened by approx. 550 mm - 4-way cooling water flow regulator - 21.5-inch multi-touch screen in Full HD ### Warranty - Warranty until initial commissioning ### Freight *Various options are available* ##### Freight: Truck Loading - Free loading onto the buyer's truck or free delivery to the buyer's premises, freight charges apply, from our warehouse in Hanover / Germany ##### Freight: Worldwide Delivery - Organization of worldwide delivery by container or box, including customs clearance, is available. ### Financing - Available upon request - lease-purchase option available ### Price - Available upon request ### Dealer Information You can view all our machines in operation under power. Upon agreement, you will receive a functional guarantee for most machines. - Tested and acquired from the original owner from ongoing production (no insolvency goods) - Exclusively from our own stock and property (no brokerage) - Immediate availability - Quality management in the process - Contractual security - Short response times and fast processing - Worldwide delivery including customs clearance possible #### Purchase - We purchase well-maintained injection molding machines (25T to 600T clamping force) manufactured from 2010 onwards. - Offer delivery within 24 hours on weekdays. Gusdpe Aiccpefx An Esi - In the event of agreement: immediate transfer. No brokerage or other contractual arrangements. Over 30 years of company history as a supplier to the plastics industry. Rely on quality, trust and fair business practices.

Condition: reconditioned (used), functionality: not functional, clamping force: 500 kN, screw diameter: 25 mm, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 375V 500-100 injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Godpfxs Ah R T Ue An Esui Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 80-380 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 80-380 CX Year of manufacture: 2019 Machine type: Hydraulic injection molding machine for plastics Clamping force: 800 kN / 80 tons Screw diameter: 40 mm Injection unit: SP 380 Machine description We offer a KraussMaffei KM 80-380 CX injection molding machine, manufactured in 2019, with a clamping force of 800 kN (80 tons), equipped with an SP 380 injection unit and a 40 mm diameter screw. TECHNICAL DATA Clamping unit Clamping force: 800 kN / 80 tons Mold opening force: 55 kN Column spacing (H × V): 420 × 420 mm Mold opening stroke: 500 mm Minimum mold height: 250 mm Maximum distance between platens: 750 mm Ejector stroke: 150 mm Ejector force (forward / backward): 23 / 10 kN Maximum mold weight: 1000 kg Injection unit SP 380 Screw diameter: 40 mm L/D ratio: 20 Maximum injection pressure: 2101 bar Injection volume: 201 cm³ Injection weight: 183 g Injection speed: 100 mm/s Volumetric injection rate: 126 cm³/s Screw speed: 295 rpm Installed heating power: 10.9 kW Nozzle pressing force: 50 kN General data Pump drive power: 15 kW Dry cycle time / stroke according to EUROMAP 6: 1.7 s / 294 mm Oil tank capacity: 280 l Dimensions and weight Length: 4090 mm Width: 1480 mm Height: 2020 mm Gujdpe Ahxv Esfx An Esi Machine weight: approximately 3500 kg

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 50-180 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 50-180 CX Year of Manufacture: 2019 Machine Type: Hydraulic Injection Molding Machine Clamping Force: 500 kN / 50 tons Screw Diameter: 30 mm Machine Description Guodpfx Anj Ahxuys Eji We offer a KraussMaffei KM 50-180 CX injection molding machine, manufactured in 2023, with a clamping force of 500 kN (50 tons), equipped with an injection unit featuring a 30 mm diameter screw. TECHNICAL DATA Clamping Unit Clamping Force: 500 kN / 50 tons Mold Opening Force: 40 kN Column Spacing (H × V): 370 × 370 mm Mold Opening Stroke: 400 mm Minimum Mold Height: 200 mm Maximum Distance Between Platens: 600 mm Ejector Stroke: 100 mm Ejector Force (forward / backward): 23 / 10 kN Maximum Mold Weight: 630 kg Injection Unit Injection Unit Type: SP 180 Screw Diameter: 30 mm L/D Ratio: 23 Maximum Injection Pressure: 2025 bar Injection Volume: 85 cm³ Injection Weight: 77 g Injection Speed: 120 mm/s Volumetric Injection Rate: 85 cm³/s Screw Speed: 365 rpm Heating Power: 8.0 kW Nozzle Clamping Force: 50 kN General Data Pump Drive Power: 11 kW Dry Cycle Time / Stroke according to EUROMAP 6: 1.2 s / 259 mm Oil Tank Capacity: 180 l Dimensions and Weight Length: 3530 mm Width: 1410 mm Height: 1960 mm Machine Weight: approximately 2600 kg

Condition: as good as new (ex-display), Year of construction: 2023, KraussMaffei KM 50-100 PX Injection Molding Machine Year of Manufacture: 2023 Manufacturer: KraussMaffei Model: KM 50-100 PX Type: Electric injection molding machine with a servohydraulic system Clamping force: 500 kN / 50 tons Control system: KraussMaffei MC6 Screw diameter: 22 mm Machine Description We offer a KraussMaffei KM 50-100 PX injection molding machine with a clamping force of 500 kN (50 tons), equipped with a modern, 5-point, knee-joint clamping system with servoelectric drive. The machine features a servoelectric drive for injection and plasticizing, as well as a servohydraulic drive for the injection unit's movement. The KraussMaffei MC6 control system, based on an industrial computer with real-time Ethernet communication technology, ensures precise control of the injection molding process. TECHNICAL DATA Clamping Unit Clamping force: 500 kN (50 tons) Mold opening force: 75 kN Clamping system: 5-point, double knee-joint system, 3-plate Clamping drive: servoelectric Mounting plate dimensions (H × V): 490 × 440 mm Column spacing (H × V): 370 × 320 mm Mold opening stroke: 300 mm Minimum mold height: 150 mm Maximum mold height: 450 mm Maximum clearance between plates: 750 mm Ejector stroke: 150 mm Ejector force (forward / backward): 17 / 8 kN Injection Unit Screw diameter: 22 mm L/D ratio: 22.7 Maximum injection pressure: 2500 bar Injection volume: 38 cm³ Injection weight: 35 g Injection speed: 125 mm/s Volumetric injection rate: 48 cm³/s Maximum screw speed: 382 rpm Plasticizing rate: 6.0 g/s Nozzle radius: 10 mm Nozzle orifice diameter: 4 mm Plasticizing system for thermoplastics Electrical and hydraulic equipment Control system: KraussMaffei MC6 Connected power (according to specifications): 6.1 kW Electrical protection: 63 A Installed heating power: 6.3 kW Number of adjustable heating zones in the cylinder: 4 Dry cycle time / stroke according to EUROMAP 6: 1.1 s / 259 mm Oil tank capacity: 120 l Gusdpe Ahxtxofx An Eji Dimensions and weight Length: 4200 mm Width: 1440 mm Height: 1850 mm Machine weight: 4000 kg (4 tons)

Condition: used, Year of construction: 2006, Arburg 370 U 600-290 (2006) CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW Gujds Ahpmmspfx An Eoi 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: used, Year of construction: 2006, Arburg 370U 600-290 (2006) 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Guedpfxs Ahgdqe An Esi Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: good (used), Year of construction: 2003, operating hours: 30,322 h, Demag Ergotech-Viva 500-270 EXTRA Closing force: 50 tons Year of manufacture: 2003 Center distance: 35.5 x 35.5 Installation height: 210 mm Gjdpfs Ag Tfpsx An Esui Screw diameter: 30 mm Displacement: 144 cm3 Operating hours: 30,322

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, clamping force: 490 kN, screw diameter: 22 mm, injection pressure: 3,487 bar, injection weight: 42 g, ejector force: 26,000 N, ejector stroke: 60 mm, total length: 2,650 mm, total width: 1,574 mm, total height: 2,858 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Witam Sprzedam stanowisko zrobotyzowane składające się z wtryskarki oraz robota przemysłowego FANUC M-10iD/10L, wykonane przez firmę WJATECH w 2023 roku. Stan idealny, bardzo mały przebieg: robot – zaledwie 132 minuty pracy, czyli 2 godziny i 12 minut, wtryskarka – kilkaset godzin pracy. Dane stanowiska: producent: WJATECH Sp. z o.o., typ: WJA-E235P-A-SR, rok produkcji: 2023, masa: 4600 kg, moc zainstalowana: 13 kW, zasilanie: 3 × 400 V, 50 Hz, prąd: 32 A, ciśnienie robocze instalacji pneumatycznej: 6 bar, zapotrzebowanie na sprężone powietrze: 1200 Nl/min. Robot przemysłowy: producent: FANUC, model: M-10iD/10L, data produkcji: sierpień 2021, typ: A05B-1227-B322, masa robota: 150 kg. Oferta dla firm poszukujących stanowiska do automatyzacji produkcji z minimalnym czasem użytkowania. Cena do negocjacji Geds Agvtwepfx An Esui

Condition: ready for operation (used), Year of construction: 2007, clamping force: 800 kN, Hydraulic injection moulding machine manufactured in 2007. This Engel VICTORY 330/80 Tech features a clamping force of 800 kN and an injection pressure of 1,600 bar. It has an opening stroke of 456 mm and an ejector stroke of 100 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 330/80 Tech machine we have for sale. Contact us for further details. - Defective / Non-operational (control unit KEBA Kemro CP 251/Z fails to boot and displays error code "8")- Design: Tie-bar-less (Holmlos) - Injection Volume: 154 cm³ - Injection Pressure: 1,600 bar - Opening Stroke: 456 mm - Ejector Stroke: 100 mm - Total Weight: 5,300 kg - Dimensions (L × W × H): Approx. 4,000 × 1,400 × 2,300 mm - Controller: KEBA Kemro K2-200 CP 251/Z (CC 200) - Optional available (not included): Automation, 3-axis handling system, conveyor belt Gedpe Agvcysfx An Eoui

Condition: good (used), Year of construction: 2011, operating hours: 48,060 h, clamping force: 35 kN, screw diameter: 18 mm, clearance between the columns: 32 mm, displacement volume: 23 cm³, injection weight: 21 g, SUMITOMO shi-Demag Systec 35/320-25 Closing force: 35 tons Year of manufacture: 2011 Tie bar diameter: 18 mm Gujdpfxs Agpcqe An Eoi Tie bar spacing: 32x32 Mounting height: 320 mm Operating hours: 48,060

Condition: ready for operation (used), Year of construction: 2014, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 7230-0232, clamping force: 500 kN, screw diameter: 25 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2014 • Machine no.: 7230-0232 Gusdpfxj Aggumj An Eoi • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 25 mm • Control system: NC5 / CDIAS • including removal device Geiger MiniServo 1.5 • Approximately 12 million cycles In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2013. Both machines have extensive features, including electric ejectors and screw drives, active tool protection functions, process data recording, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we would be happy to provide you with further information and images. Our asking price for the complete package, including both machines and both Geiger removal devices, is €55,000 net, ex works.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 61,679 h, functionality: fully functional, machine/vehicle number: 7230-0182, clamping force: 500 kN, screw diameter: 22 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2013 • Machine no.: 7230-0182 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 22 mm • Control system: NC5 / CDIAS • PLC operating hours: approx. 61,679 h • Drive operating hours: approx. 56,166 h • Heater operating hours: approx. 57,914 h • Total cycles: approx. 11.9 million Guodpfxs Aggpas An Eoi • incl. Geiger MiniServo 1.5 parts removal device In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2014. Both machines feature extensive equipment, including electric ejectors and screw drives, active tool protection functions, process data acquisition, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we will gladly provide you with further information and images. Our asking price for the complete package consisting of both machines, including both Geiger parts removal devices, is €55,000 net, ex warehouse.

Condition: ready for operation (used), Year of construction: 2015, clamping force: 900 kN, controller manufacturer: ENGEL, controller model: cc300, This 4-axis Engel Victory 200/90 tech + Viper 6 RC300 was manufactured in 2015. It features a clamping force of 90 tonnes and an injection unit size of 200. The machine includes a central ejector system and a magnetic clamping system for enhanced efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/90 tech + Viper 6 RC300 hydraulic injection moulding machine we have for sale. Contact us for further details. ENGEL Victory 200/90 tech- Clamping Force: 90 tonnes - Injection Unit Size: 200 - Total Operating Hours (Machine): 15,903 h - Operating Hours in Automatic (Robot): 12,086 h - Clamping Platen Execution: Tie-bar-less standard platen according to EUROMAP - Centring Diameter: 125 mm EUROMAP - Magnetic Clamping System: Stäubli magnetic clamping plate - Ejector System: Central ejector with ejector safety interface - Heating System: 230 V ceramic cylinder heating bands ENGEL Viper 6 RC300- Maximum Manipulation Weight (Payload): 5 kg- Robot Axis Strokes: X-Stroke: 400 mm Y-Stroke (Single): 1,000 mm Z-Stroke: 2,360 mm C-Axis: Compact pneumatic rotary axis, 0–90° pivot, torque 6 Nm- Minimum Deposit Height: 1450 mm (center of unswiveled C-axis, without gripper head and part) - Max. Vertical Part / Gripper Head Size (TV): 200 mm - Maximum Total System Height: 4100 mm (handling and machine incl. machine shoes) - Part Deposit Side: Machine rear side - Entry Movement: Vertical Guodj Af Tyzspfx An Eei

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 61038312, clamping force: 10,000 kN, screw diameter: 95 mm, clearance between the columns: 1,420 mm, displacement volume: 3,367 cm³, injection pressure: 1,795 bar, injection weight: 2,391 g, opening stroke: 3,200 mm, total length: 10,860 mm, total width: 3,400 mm, total height: 2,640 mm, overall weight: 50,500 kg, drive type: Hydraulisch, clear span: 1,420 mm, tool weight: 2,100,000 g, Injection molding machines directly from the manufacturer! As the manufacturer, KraussMaffei offers you our tested and versatile stock machines: The hydromechanical two-plate clamping unit of the GX machine sets new standards in terms of quality and productivity. The sophisticated GuideX guide shoe absorbs forces ideally and increases the service life of the tools. The innovative GearX locking system engages immediately and reliably. The high flexibility of the machine is particularly evident in the multi-component version. In this piggyback arrangement (Z-configuration), the system is extremely compact, and no special hall height is required, making this design particularly suitable for confined spaces. TECHNICAL DATA: KM 1000 / 6100 GX G02 (Order 38611785) CONTROL  MC6 with 21.5” TFT color screen and multi-touch function CLAMPING UNIT  Clamping force kN 10000  Tool opening force, max kN 700  Daylight (h x v) mm 1420 x 1170  Mounting plate (h x v) mm 1950 x 1750  Tool installation height min. - max. mm 500 – 1200  Opening width mm 2400  Tool opening stroke max. mm 1900  Ejector drive Hydraulic  Ejector stroke mm 300  Ejector force forward/backward kN 142 / 76  Max. tool weight kg 21000 INJECTION UNIT  Screw diameter / type mm 95 / Standard  Effective Ls/D ratio 23  Injection pressure bar 1795  Stroke volume cm³ 3367  Shot weight at max. stroke for PS g 2391  Injection speed mm/s 110  Injection flow rate cm³/s 780  Screw drive / speed 1/min 147  Plasticizing flow rate (standard screw) 4) g/s 102  Nozzle system force kN 166 ELECTRICAL PARAMETERS  Installed heating power kW 54  Power supply V / Hz 400 / 50 WEIGHT AND DIMENSIONS  Net weight with control cabinet t 50.5  Length x width x height m 10.86 x 3.40 x 2.64 ADDITIONAL EQUIPMENT  Enlarged mold opening width  Core pull hydraulic 3+1  Core pull pneumatic 1+1  Air valves 1+1  Pneumatic cascade valve 3 +1  Hydraulic cascade 8  Water manifold 10  Euromap interfaces E18, E67, E77  Adaptive Process Control (APC+) Gsdj Afhmkjpfx An Eoui The machine is located at our plant in Parsdorf and is available for short-term delivery. Further optional equipment can be offered on request. We look forward to your inquiry.