Human Arc machinery

Condition: used, Year of construction: 2012, x-travel 185 mm z-travel 385 mm control Mazatrol Matrix Nexus Maximum swing diameter 550 mm Maximum turning diameter 280 mm bar capacity 51 mm workpiece weight max. 200 kg main spindle speed 35-6000 U/min milling head speed 25-4500 U/min tool turret 12 Plätze rapid power traverse in X-and Z direction 30/33 m/min spindle bore 61 mm weight of the machine ca. 3800 kg Capacity: Chuck size: 6 inches Max. swing diameter: 550 mm Standard turning diameter: 221 mm Max. turning diameter: 280 mm Max. bar capacity: 51 mm Distance between spindle nose and turret edge: 84–469 mm Main spindle: Gedsyukgcopfx Aggoip Speed: 35–6000 rpm Spindle bore: 61 mm Spindle nose: A2-5 Tailstock: Tailstock body travel: 350 mm Max. thrust: 1962 N Turret: Number of tools: 12 pieces Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling drill: 16 mm Milling tap: M16 x 2.0 mm End mills: 16 mm Milling spindle speed: 25–4500 rpm Equipment/Accessories: Tool holders Tools Powered tools Turning tool holders Coolant system Documentation

Condition: excellent (used), Year of construction: 2010, x-travel 185 mm z-travel 360 mm b-travel 460 mm control Mazatrol 640 T Maximum swing diameter 550 mm Maximum turning diameter 280 mm workpiece weight max. 200 kg bar capacity 51 mm main spindle speed 35-6000 U/min milling head speed 25-4500 U/min rapid power traverse in X-and Z direction 30/33 m/min Rapid traverse B axis 30 m/min tool turret 12 Plätze weight of the machine ca. 4100 kg Capacity: Chuck size: 6 inches Max. swing diameter: 550 mm Standard turning diameter: 221 mm Max. turning diameter: 280 mm Max. bar capacity: 51 mm Distance between spindle nose and turret edge: 80–535 mm Main spindle: Speed: 35–6000 rpm Spindle bore: 61 mm Counter spindle: Speed: 35–6000 rpm Spindle bore: 52 mm Turret: Number of tools: 12 pieces Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling drill: 16 mm Milling tap: M12 End mills: 16 mm Milling spindle speed: 25–4,500 rpm Equipment/Accessories: Tool holders Tools Powered tools Turning tool holders Coolant system Chip conveyor Godsyukf Sopfx Aggeip Documentation

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Godpfx Asyugvaoggoip Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit - Manuals The machine is no more in production but still under power and will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Giodpfx Asyufqpjggjp Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: ready for operation (used), Year of construction: 2013, operating hours: 35,000 h, travel distance X-axis: 300 mm, travel distance Z-axis: 800 mm, spindle motor power: 48,000 W, spindle speed (max.): 4,000 rpm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis DMG MORI CTX Beta 800 4a was manufactured in 2013. It features a powerful Mailspindle ISM 102 with a speed of 4,000 rpm and an efficient 8/20 bar coolant system with a 600 L capacity. The machine is equipped with a 16-place star turret and a barfeeder for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a turn-mill centre we have for sale. Contact us for further details. • Coolant system: 8/20 bar, 600 L, with paper band filter • External coolant for main and sub spindles • Draw tube: 104 mm • Turrets: 2 x 330 mm VDI30, 16-station star turrets Additional equipment Gsdpoyuc Apefx Aggsip • Bar feeder IF • IRCO bar feeder SIMAG 80.1-R, 3200 mm Technical Specification Driven Tools Yes Counter Spindle Yes

Condition: used, Year of construction: 1998, • CNC machining centre Emco, Type VMC 600, year of manufacture 1998 Giodpfoyucbfex Aggep • incl. handwheel + 3 vices with clamping devices

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details turning diameter 100 mm turning length 320 / 345 mm control Siemens 840 D swing diameter 145 mm spindle distance 580 mm slide I - cross travel (X1) 220 mm slide I - longitudial travel (Z1) 320 mm y-axis +/- 30 mm rapid traverse (X/Y/Z) 30/15/30 m/min slide II - cross travel (X2) 120 mm slide II - longitudial travel (Z2) 345 mm rapid traverse (X/Z) 30 m/min Giodpoyubdfsfx Aggsp Travel subspindle (Z3) 380 mm vertical stroke (X3) 145 mm bar material dia. max. 36 mm rapid traverse (X/Z) 20/30 m/min power capacity (40/100 % ED) 26/21 kW spindle turning speed range 40 - 7200 U/min total power requirement 42 kVA weight of the machine ca. 5,3 t Additional information CNC turning and milling centre with Y-axis, 2 turrets, subspindle and bar feeder. A total of over 44,000 EUR has been invested in necessary repairs and maintenance over the last 5 years by DMG MORI (replacement of the main spindle S4, ball-screws, etc.). Equipment: - SIEMENS 840 D powerline CNC control - Number of controlled axes: 9 - 2 x C-axis - Y-axis in upper turret - Pick-up device with gripper - 2 SAUTER turrets with 12 tool positions (driven), VDI 25 - Tool drive with a speed range of 30 to 6000 rpm - Coolant system with paper band filter - Chip conveyor - Collet chuck on main and subspindle - Bar loading magazine, make: IEMCA BOSS 332 E 32 L, max. bar length 3180 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Technical details turning diameter 760 mm turning length 1540 mm control Fanuc 31i-B total power requirement 94,42 kW weight of the machine ca. 15,5 t Additional information Integrated turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and counter spindle. Godpfx Agoyua T Ssgoip The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Spindle speed: 4000 rpm kW/ AC motor power (cont./30 min.) 22/26 Turning/milling head B-axis rotation / indexing 240° (±120°) Tool holder Capto C6 Speed ??in revolutions per minute 12000 rpm AC motor power kW/30 min. 15/18.5 Number of tools 40 (Opz. 80) Tool turret Number of driven tools 12 (12) Number of driven tools 7.8 kW/30 min.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, CNC lathe, brand CMZ, model: TTL-66-66-T1Y-T2Y Optional equipment: 9. Machine language: French 4. Machine manuals in downloadable PDF format available on cloud.cmz.com G-code Type A on Fanuc CNC Through-spindle coolant on left spindle Giodpfx Agsyt Smhogjp Hainbuch collet chuck AXZUG 65 (standard) 2702/0008 for left spindle SMW-Autoblok BBD 175 Ø56 3-jaw chuck with a set of soft jaws for the right spindle Measuring arm Hinged belt chip conveyor, side discharge Upper turret (T1): Dual high-pressure pump (6+15 bar, 55 l/min) Internal turret (12): Dual high-pressure pump (6+15 bar, 55 l/min) Machine stop indicator lamp Automatic parts catcher Parts catcher with bucket and pneumatic open/close for collecting ejected parts Pneumatic parts ejector for sub-spindle with 100 mm stroke, adjustable stroke and end-of-travel sensor Unimag interface for bar feeder

Condition: good (used), Year of construction: 2022, functionality: fully functional, Fanuc control, two turrets, Y-axis, sub spindle, 65 mm spindle bore, short loader, Gedpfxsyt R Ude Aggsip tool holder, AGW,

Condition: used, Year of construction: 2008, x-travel 410 mm y-travel 570 mm z-travel 140 mm control Mazatrol Matrix Maximum working diameter 545 mm Maximum working length 519 mm main spindle speed 35 - 6000 U/min tool taper Capto C6 rapid traverse y/x/z axis 30/26/33 m/min Performance/capacity: Max. swivel range: 545 mm Max. machining diameter: 545 mm Max. outside diameter for bar work: 51 mm Max. machining length: 519 mm Max. workpiece weight: -Chuck work: 150 kg -Bar work: 200 kg Main spindle: Spindle speed: 35-6000 rpm Spindle bore diameter: 61 mm Max. torque: 161 Nm Gijdeyt R Idepfx Aggsp Tailstock: Rapid traverse: 8 m/min Travel range (advance/return): 434/281 mm Milling head: Milling head type: Single spindle with ATC Tool shank type: Capto C6 Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mm Milling spindle speed: 15-12000 rpm Equipment/accessories: -Chip conveyor -Mist extraction -Tools -Documentation

Condition: good (used), Year of construction: 2005, The machine has been maintained annually under a service contract with Okuma. Okuma Mac Turn 550 W Year of manufacture: 2005 Control: OSP-E 100 L Max. turning diameter: 720 mm Distance between tailstock tip and spindle nose: 2,505 mm Y axis travel: 250 mm Main spindle speed: up to 3,500 rpm Spindle motor power: 30 kW Lower turret with 12 stations Milling spindle with infinitely variable B axis 80-position tool magazine HSK 100 tool holder 3-jaw chuck, diameter: 315 mm In 2023, the cable carrier for the W axis including all hoses was replaced. In October 2024, the linear guides for X/Y/Z axes were renewed. All work was carried out by Okuma. The machine was cleaned. Covers and sheet metal parts were dismantled. 8th axis dismantled. Travelling column dismantled and removed from the machine. ATC dismantled and removed from the machine. All linear guides removed. Mating surfaces of the ZA axis cleaned. New ZA axis linear guide incl. carriages installed and secured at specified torque. New ZA axis ballscrew incl. bearings installed. Base plate for the travelling column installed and secured at specified torque, respectively fastened to carriages. Lubrication lines connected. ATC including auxiliary components reinstalled and connected. New YA and XA linear guides installed and tightened to specification. New YA axis ballscrew with bearings installed. Travelling column installed and lubrication lines connected. XA base plate installed and aligned. 8th axis installed and aligned. H1 turret mounted - Install drive motor for 8th axis - Assemble 8th axis and new H1, set geometry - Function test for 8th axis and H1 - Run-in program for B axis approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various covers - Install chuck - Adjust zero points - Check tool change Giedpfsyt Nvtex Aggsp

Condition: good (used), Year of construction: 2004, CNC turning and milling center with 9 CNC axes, Okuma Mac Turn 350 W, year of manufacture 2004, OSP-E 100L, 80 WW fac, HSK 63 holder, stepless B-axis as milling spindle, lower 12-station turret with live tooling, Interlite compact filter system 900 l, extraction, spindle hours approx. 18,300 h, chip conveyor, tool changer gripper arm completely renewed, high-pressure cooling, tool measuring arm, tool changer overhauled, main spindle Kitagawa B - 210, sub spindle Kitagawa B - 208. Gedpeyt H U Tofx Aggsip

Condition: good (used), Year of construction: 2006, Max cutting diameter 420mm, 750mm swing, max cutting length 1524mm, 102mm bar capacity, 3300rpm spindle, 4000rpm milling, 12 station turret, 30kW motor power, 3 jaw chuck, Mazatrol 640T Nexus control, Gjdpsyt H Tvefx Aggsip 0.001 degree C axis, tool setter, tailstock, swarf conveyor

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8086010539B, spindle speed (max.): 6,500 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,500 rpm, feed length X-axis: 65 mm, feed length Y-axis: 120 mm, feed length Z-axis: 350 mm, total height: 1,920 mm, total length: 4,900 mm, counter spindle motor power: 3,700 W, counter spindle speed (max.): 6,500 rpm, number of axes: 6, DMG Gildemeister Sprint 42 Linear (Year of manufacture 2008) with IEMCA Boss 545-E bar feeder The main and sub spindles have been newly mounted and the machine has undergone a comprehensive general overhaul. High-precision CNC turning center for complex series production. The DMG Gildemeister Sprint 42 Linear is specifically designed for automated turning operations. Equipped with two workpiece spindles, six linear axes and optionally two C-axes, it enables simultaneous machining on the main and sub spindle. The maximum bar capacity is 42 mm, and the high spindle speed reaches up to 6,500 rpm. Technical features: Axes & Slides: Travel ranges X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm with rapid traverse up to 30 m/min. The second slide offers X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm and rapid traverse 30 m/min (X2/Z2) or 18 m/min (Y2). Tool capacity: Turret with 26 stations; suitable for both fixed turning tools and driven tools for milling and threading operations. Spindles: Main and sub spindle with 6,500 rpm, rated power 5.5 kW (main) and 3.7 kW (sub), torque (S1) 37.5 Nm and (S2) 19.6 Nm, respectively. Control: CNC Fanuc 160i-TB with SlimLine operating panel and 15″ color TFT – intuitive operation via industrial PC. Dimensions & Logistics: Base machine (L × W × H): 3,354 × 946 × 1,571 mm, weight 4,700 kg. Electrical cabinet: 5,400 × 680 × 1,750 mm. Machine center at ergonomic height of 1,100 mm. IEMCA Boss 545-E bar feeder (Type 32 LL, year of manufacture 2007) The included bar feeder significantly eases series production. It is designed for bar diameters up to 42 mm, weighs approx. 860 kg, and operates at 400 V/50 Hz; required compressed air connection is 6 bar. Gjdpfxeyt E T Ue Aggsip Should you have any questions or need further information, feel free to contact us.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 61,440 h, functionality: fully functional, machine/vehicle number: 06800003891, Equipment: documentation/manual, We are offering this ready-to-use DMG GILDEMEISTER CTV 250 CNC turning and milling center, year of manufacture 2008. Manufacturer: DMG GILDEMEISTER Model: CTV 250 Year of manufacture: 2008 Condition: operational Machine type: CNC turning and milling center Operating hours: Power on: approx. 76,300h / Spindle run: approx. 61,440h Gsdjyt Dudopfx Aggsip The following components are included in the sale: - Pallet circulation system - Conveyor belts for finished parts - Chip conveyor Regular maintenance has been carried out and documentation can be provided. If you have any questions or need further information, please send us a message or call us.

Condition: like new (used), Year of construction: 2021, operating hours: 600 h, functionality: fully functional, machine/vehicle number: MT 65 G2, The machine is like new. Godpjyttiqefx Aggeip

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,771 h, spindle speed (max.): 3,800 rpm, travel distance Y-axis: 160 mm, controller manufacturer: OKUMA, controller model: OSP-P300SA, number of slots in tool magazine: 40, number of axes: 4, This 4-axis Okuma Multus B300 II Turn Mill Centre was manufactured in 2022. It features a control unit OKUMA OSP-P300SA, a main spindle with a three-jaw chuck diameter of 304mm, and a counter spindle with a C-axis. The milling spindle supports up to 6000 rpm with a torque of 65.7 Nm. If you are looking to get high-quality milling and turning capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information. Additional equipment • HI-Cut Pro high-speed control Machine Benefits Qualitative Machine Benefits Gsdpfxoytrtus Aggoip • Enlarged main spindle • Counter spindle with c-axis on w-axis: rapid traverse: 20m/min max: 5000 1/min torque: 328nm spindle nose: kk size 6 spindle bore diameter: 62mm hollow clamping cylinder and three-jaw chuck diameter: 254mm bore in drawtube: 52mm diameter Technical Machine Benefits • 8 short tapers • Front bearing diameter: 120mm • Boring diameter: 80mm • Torque: 412 nm • Helical interpolation • 10 workpiece zero points • Tool spindle and c-axis: 0. 001° for main spindle • Ikz: 20 bar • Hsk a 63 • Electr. Spindle orientation: +/- 0. 1° Extra Information New spindle in August 2024Optional. many Tools, holder, accesories (25.000€) Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2015, DMG UNIVERSAL MACHINE CENTER HSC 105 Linear Year 2015 Travel : X1.050 Y800 Z 500mm Heidenhain iTnc 530 control Spindle speed 28.000rpm Giedpfxsytpgfo Aggsp ATC 32 HSK-A63 Table Ø900mm NC B axis -10o ~ +110o NC C axis 360 x 0.001o Electronic hand-wheel Chip conveyor Direct measuring system.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Gildemeister GMX 400 Year of manufacture: 2004 Control system: Siemens 840 D Powerline Max. turning diameter: 640 mm Turning length: 1,585 mm Standard turning diameter: 400 mm Gedpfjytpfzjx Aggsip Control: Sinumerik 840D powerline Siemens Distance between centers: 1,930 mm Main spindle: Type: ISM 90 Max. speed: 4,000 rpm Drive power - main spindle: 36 / 45 kW Max. torque: 600 Nm Spindle diameter front bearing: 150 mm Spindle bore: 107 mm Max. bar diameter: 102 mm C-axis: 0.001° Chuck diameter: 315 (max. 400) mm Milling spindle: Max. speed: 12,000 rpm Drive power - milling spindle: 13.2 / 22 kW Max. torque: 100 Nm Tool holder: HSK-A63 Holding torque: 500 Nm y-axis: +/- 110 mm b-axis: +/- 120° c-axis: 1° x-travel: 550 mm Bearing diameter: 80 / 55 mm Tool magazine: Number of tool slots: 120 positions Tool holder: HSK-A63 Max. tool length: 350 mm Chip conveyor Feeds: Rapid traverse X1/Z1: 40/60 m/min Total power requirement: 70 kVA Machine weight approx.: 20.0 t

Condition: used, Year of construction: 2004, Machine Year of Manufacture Bar Loader Additional Information Hours Twin 42 2004 Irco Breuning SIMAG Hydraulic line defective at turret 1 or 2 79593 25020 Twin 42 2004 Irco Breuning SIMAG Dina module removed, pressure clamp (indicates collet is not closed) 69573 9625 Twin 42 2004 Irco Breuning SIMAG Machine operational and in production 72402 8375 Gjdjytnywopfx Aggjip Twin 42 2004 Irco Breuning SIMAG Main spindle defective with bearing damage, spindle clamp defective, LT module missing, Dina module missing Twin 42 2008 Irco Breuning SIMAG Machine operational and in production 5104 83790 Twin 42 2008 Irco Breuning ECO Profi multi-channel changer Machine operational and in production 99825 76595

Condition: excellent (used), Year of construction: 2018, operating hours: 3,370 h, functionality: fully functional, HWACHEON CNC Lathe Year of manufacture: 2018 Model: HI-TECH 230B YMC Control: FANUC 0i-TF with Manual Guide Max turning diameter: Ø400 mm Max turning length: L-290 mm Machine weight: 4,400 kg Max spindle speed: 3,500 rpm Machining time: 2,040 operating hours Machine operating time: 3,370 operating hours Machine dimensions: 2100 x 3100 x 2000 mm Self-centering 3-jaw chuck on main spindle Ø250 mm, thru-hole Ø80 mm Through spindle, bore Ø80 mm Measuring probe Gisdoytnunjpfx Aggep Coolant system Chip conveyor Technical documentation (DTR) Listed price is net (exchange rate as of 11.3.2026), negotiable All additional information and the machine condition can be found in the photos. The lathe is regularly serviced and used in proper working conditions. Please contact me for further details or to arrange a viewing. Used for manufacturing components and spare parts for our own machines.

Condition: excellent (used), Year of construction: 2011, • 1 CNC lathe (132), manufacturer Miyano, model ABX-64SY, year 2011, control unit Fanuc, model 31i-Model A, main/sub-spindle, 2x 12-position turrets, bar feeder FMB Turbo 5-55, chip conveyor Yoshida. Gedpfxjytd Rxs Aggeip

Condition: excellent (used), Year of construction: 2011, • 1 CNC lathe (129), manufacturer Miyano, model BNJ-51Y3, year 2011, control Fanuc, main/opposing spindle, 12-position and 6-position turret, chip conveyor, manufacturer LNS, type Turbo MH500 Gedpfx Agjytd Dxsgoip

Condition: excellent (used), Year of construction: 2008, We are offering this very well-maintained Monforts RNC 600 MultiTurn CNC turning and milling center, year of manufacture 2008. Giodpfx Asyr N Hcoggsp