Radial Drilling Machine

Kovosvit MAS VO 50

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Ndjdpfew Hanhox Amtjc Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg

Condition: used, Technical details: turning diameter over bed: 1200 mm turning diameter over support: 800 mm turning length: 3200 mm length of gap: 600 mm center height measured in bed: 600 mm turning dia. in gap: 600 mm spindle turning speed - continuous: 4,6-545 / 22 steps U/min spindle passage: 90 mm feed: 1,4-510 m/min taper: MK6 total power requirement: 15 kW weight of the machine ca.: 10,0 t dimensions L x W x H: 6,20x2,00x1,80 m dimensions electric cabinet LxWxH: 0,55x0,33x1,0 m Nedpfszuyfasx Amtjdc equipped with: face chuck diameter 1000m (4 jaw chuck) fourfold chisel taper steady rest closed, inside diameter 250mm revolving tail center conical turning device *

Condition: good (used), Manufacturer: STANKO Type: 7D430 Year of manufacture: 1994 Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Lubrication Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Dimensions (estimated) Length 3000 mm Width Ndsdpfowpud Ajx Amtjc 2200 mm Height 3000 mm Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details.

Condition: used, Year of construction: 1978, turning diameter over bed 1450 mm turning diameter over slide rest 1000 mm Nsdsyqvwlspfx Amtodc turning length 8000 mm spindle bore 160 mm turning speeds 2,8-560 U/min faceplate 1400 mm bed width 850 mm turning diameter in the gap 1800 mm length of gap 600 mm steady 1070 mm steady 1070 mm steady 650 mm Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2026, functionality: fully functional, Swing over bed 710 mm Swing over cross slide 420 mm Swing in gap 910 mm Gap length 357 mm Center height 250 mm Center distance 2000 mm Bed width 450 mm Speed ​​10 – 1600 rpm Cutting tool diameter 32 x 32 mm Spindle bore D73.5 mm Drive power 5.5 kW Tailstock sleeve D90 mm Tailstock sleeve travel 180 mm Tailstock taper Morze 5 Weight approx. 3250 kg Dimensions L x W x H = 3500 x 1100 x 1850 mm Accessories, Equipment - 3-axis indicator system - Chuck guard - 3-jaw chuck D250 mm - 4 Chuck diameter 300 mm - Tool holder guard - Long slide stop - Steady rest - Traveling steady rest - Standing center - Reduced adapters for main spindle - Tailstock Nodpfoyt Ihnjx Amtodc - Coolant system - 4-way tool post - Machine light - Rapid traverse on longitudinal and cross slides - CE Mark - Machine manuals

Condition: good (used), Year of construction: 2001, functionality: fully functional, Horizontal Boring Mill UNION T110 Year of manufacture: 2001 Travel axes: X: 1500 mm Y: 1250 mm (total vertical adjustment) 0 mm - lowest position of the spindle center to the table surface Z: 1000 mm W: 550 mm (quill movement) B: 360° infinitely variable Spindle diameter: 110 mm Transmission steps: 2 Max. spindle speed: 4000 rpm Rapid traverse: 15 m/min Spindle taper: SK 50 Clamping table surface: 1000 x 1250 mm T-slot width: 22 mm Height of clamping surface above floor: 1050 mm Max. table load: 6 t Total weight (complete): approx. 13.5 t Control system: Heidenhain TNC 426 Ndodpfey Rpm Usx Amtec Electronic handwheel Various tool holders can be purchased additionally.

Condition: new, Year of construction: 2025, functionality: fully functional, Kwik-Way SVS2 Deluxe Valve grinder machine - new condition With rocker arm grinder. Technical details: Precision 6-ball chuck Accuracy: 0,005 mm Njdpfx Amonacu Dotsdc Minimum valve stem diameter: 4 mm Maximum valve stem diameter: 14 mm Minimum valve stem length (approx): 85,73 mm Maximum valve head diameter: 100 mm Valve grinding wheel diameter: 178 mm Surface wheel diameter: 76 mm Spindle drive motor (H.P.): 0,37 kW Chuck drive motor (H.P.): 0,06 kW Coolant capacity: 3,8 ltr Chuck R.P.M. (approx.): 100 - 300 Grinding angles: 13° - 62° Main dimensions: W x L x H: 940 x 559 x 406 mm Weight: 141 kg If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm Nedpfxju N D Rqo Amtjdc - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: excellent (used), Year of construction: 1972, machine/vehicle number: 42 473, Manufacturer: Meuser Type: M 70 R Year of manufacture: 1970 Condition: very good, fully functional Ndsdpfelp Iqmox Amtjc Technical data: Overhang: 1800 mm Drill spindle mount: MK6 Drilling capacity, max.: 120 Table size: 2000 x 1100 mm Rotary table: 700 x 700 x 500 mm Weight: 8000 kg With support column Hydraulic and electrical diagrams are available.

Condition: excellent (used), Four-jaw chuck make Röhm diameter 315 mm single adjustable jaws Ndedpspk A A Hjfx Amtjc bolt circle 120 mm