6
bore diameter 550 mm
Spindle diameter 100 mm
bore depth 320 mm
turning speeds 10 70 U/min
feed stepless 0 - 12 mm/min
voltage 380 V / 50 Hz
total power requirement 3 kW
weight of the machine ca. 1.35 t
dimensions of the machine ca. 1,0 x 2,5 x 1,0 m
Transportable boring mill, completely ready for connection,
Drilling spindle drive via LENZE planetary gear,
feed drive with LENZE DC motor,
power 100 watts,
Fn2xxcp
left and right rotation,
with tool holder for Ø 420 and Ø 550 mm,
tool holder for...
9
Alzmetall Abomat 160
Zcgkc
tool adaptor SK50
weight of the machine ca. 2 t
Control
7
spindle diameter 70 mm
x-travel 450 mm
y-travel 300 mm
z-travel 350 mm
surface area 700 x 300 mm
hydr. movements of the speed movement 2500 m/min.
outer clamping tapper SIP 2e
turning speeds 3000 U/min
weight 2,5 t
Mtzbmg
With 2 axes - Digital
Tools
14
Jig boring machine  / Coö rdinate jig boring
Manufacturer:  Hauser
Type:  OP3
Travel:  400x250x400mm
Table:  600x320mm
B9sowifoam
Taper: MK2
Including Extra  Axes!
Spindle-speed: 60-3000 rpm
Machine-Dimensions: 1300x1400x1600mm
5
1 used drilling sawing system
Fabr. Peddinghaus
Type BSA / TDK 1000/3/9/F1
with controller, FAGOR CNC 8055i
Year 94/2006
consisting of
Drilling rig TDK 1000/9 E
Sawmill LC 1000
Retrofit 2006 by Peddinghaus
Replacement control, FAGOR CNC 8055i
New control cabinet
Drilling spindle number: 9 pcs.
Profile width: 1000 mm
Profile height max. 420 (drilling) mm
Profile height max. 440 (saws) mm
Saw blade dimensions: 1250 mm
Control voltage: 24 V
Operating voltage: 380 V
Saw
Peddinghaus LC 1250
Saw...
5
Milling drill with gears Fervi T047/400VDA tapping 400V 1,5kW NEW MANUFACTURING " CE ".
The machine can be used for the processing of:
Milling
Drilling
Tapping.
Drilling capacity on cast iron with pre-hole : ø 40 mm.
Max. drilling capacity on steel with pre-hole: 32 mm dia.
Milling capacity with insert cutter : 80 mm dia.
Milling capacity : Ø 25 mm.
Tapping capacity : Ø 22 mm.
Conical shank : CM 4.
Spindle stroke : 130 mm.
Sleeve : ø 76 mm.
Column : ø 115 mm.
Head inclination : ± 60°.
Spindle sp...
5
bore diameter 620 mm
spindle diameter 130 mm
bore depth 320 mm
Yr0u8o
feed stepless 0 - 12 mm/min
turning speeds 10 - 70 U/min
voltage 380 V / 50 Hz
total power requirement 4 kW
weight of the machine ca. 1,6 t
dimensions of the machine ca. 2,0 x 1,2 x 1,3 m
transportable drilling out work, completely ready for connection
gear of drill spindle runs over LENZE planetary drive
advanced feed with LENZE direct current motor, output: 160 watt
clockwise and counterclockwise
with tool holder for Ø 42...
7
spindle diameter 75 mm
x-travel - mm
y-travel ca. 500 mm
z-travel ca. 300 mm
Column-Diameter 160 mm
Boring power 50 mm
spindle taper MK4
spindle turning speed range 50 - 1500 U/min
feeds 0,12 / 0,2 / 0,32 mm/U
drilling depth 200 mm
throat 280 / 540 mm
thread capacity M 45
total power requirement 5 kW
weight of the machine ca. 2 t
dimensions of the machine ca. 2,3 x 2,4 x 2,4 m
Control
Drilling and tapping machine on base with splash guard cabin, screen control for x + y travel range, digi...
5
max. 1.250 mm
taper MK MK4
feed
Etckk3v
weight of the machine ca. 0,5 t
14
Jig boring machine  / Coö rdinate jig boring
Manufacturer:  WMW Heckert / VEB Mikromat
Type:  Mikromat 4B / BKoE 400x630/2 PA2
Travel:  630x400x400mm
Table: 800x460 (630x400 T-slot)
Including 4th axis: 330mm
Spindle-speed: 2800 rpm
With  Heidenhain  digital
0iang7ht
Machine-dimensions: 1700x1500x2200mm
1
1 used centering drilling machine
make Jones &Shipmann
Xlicyshl
infinitely variable speed up to 1400 rpm
drive 0,37 KW
first class condition
7
Automatic machine for drilling copper manifolds.
Ijgmwol2
Being a specific machine, it is mainly suitable for working with all those materials most used in the civil and industrial heating, air conditioning and refrigeration sectors.
max. drilling diameter: 35 mm
drilling stroke: 300 mm
Pdtnz
travel range Y-axis: 300 mm
travel range X-axis: 6000 mm
drive X-axis: frequency converter
Y-axis NC controlled
4-fold tool changer
Pneumatic clamping unit up to 250 mm
USB connection
Micronizer
Clamping pressure regulation up to max. 150 mm
5
spindle diameter 110 mm
x-travel 900 mm
y-travel 600 mm
z-axis 200 mm
table length 1020 mm
table width 860 mm
taper MK 40
Table size, approx.1,020 x 860mm
Max. weight of workpiece800kg
Table travel, longitudinal, max. (X)900mm
Boring head travel, cross, max. (Y)600mm
Boring spindle stroke (Z)200mm
Vertical travel of cross beam (W)635mm
Vertical distance between table and boring spindle15 - 850mm
Distance between columns950mm
Spindle Ø110mm
Spindle taper internal/externalISO 40
Rcm333yjt
18...
2
throat - mm
tool adaptor -
Beog7m7hfq
power requirement - kW
23 mm
spindle distance max. 400 mm
1200 U/min
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
8
In good technical condition and fully functional.
C8mw0q8l0
Control system: HEIDENHAIN TNC 355.
Travels: 2000 x 1600 x 800 mm.
Year of production 1990.
3
Drilling machine
Frasemachine
Model: F400-E
Cbalvylm7p
SWITCHBOARD
6
Immediately available from site :
Drill grinding machine Christen
Type 1 - 32 100 A
Vvocpy
Year of manufacture 1985
Grinding diameter drill 1 - 32 mm
Morse taper 1 / 2 / 3
Cutting edges 2,3,4,5,6,10,12
Pitch 15/20/30/60
Pointed angle 60 - 180 degrees
Coolant device
Complete accessories
At the price of Euro 1.000.-plus VAT.
6
MAS KOVOSVIT Jig Borer WKV 100, yom 1970
Bz2r0em3jm
Main technical data:
Table size 1000x 1600 mm,
Table travel 1400 mm,
Max table load 2000 kg,
Distance b/n columns 1600 mm,
Spindle head vertical travel 700 mm,
Spindle vertical travel 1000 mm,
Spindle head horizontal travel 700 mm,
Quills travels 300 mm,
Quills diameters 120 mm,
Spindle taper 15:100,
Vertical spindle speeds range 23x 12.5-2000 rpm,
Horizontal spindles speeds ranges 8x 20-1000 rpm,
Main motor power 4 kW,
Overall dimensions LxWx...
4
spindle diameter 0 mm
x-travel 1400 mm
y-travel 1000 mm
z-travel 900 mm
total power requirement 15 kW
Table size, approx.1,570 x 1,024mm
Max. weight on table, approx.2,500 kg
Table travel, longitudinal1,400mm
Spindle travel, cross1.000mm
Vertical travel of spindle quill300mm
Vertical travel of cross beam900mm
Distance between table and boring spindle, max.1.265mm
Distance between the two columns1,600mm
Max. load on table, approx.2.500kg
Spindle taper, internal / externalMK 4 / Sip 4 e
18 s...
1
drilling unit POSIVA B63LI2 K4
Qdotkdhs
4
X Axis 2000.0 mm
Y Axis 2000.0 mm
Z Axis 1250.0 mm
Table length 1800.0 mm
Table width 1800.0 mm
Piece weight 12000.0 kg
Spindle diameter 130.0 mm
Total weight: 32 000kg
B0ccust0
Voortman V600 drilling rig for profiles and flat steel with movable drilling unit.
CNC-controlled drilling unit movable in longitudinal direction, adjustment 0 - 18,300 mm, with manual quick-change tool chuck, vertical hydraulic hold-down device, web and flange height measurement, with automatic electronically stepless feed and speed control (continuous monitoring), enabling optimum chip removal, adjustment by means of frequency-controlled spindle drive, thread cutting with special tools possibl...
2
Table dimensions: 400x400mm, connected load: 1.5kW, weight: 800kg.
Cbmv7cxqqj
Jig boring machine SIP Hydroptic 6A
SIP producer
Model HYDROPTIC 6A
Year of production 1984
Ptknd
Digital read out
The size of the work table is 1100 x 842 mm
Max. item weight on a 1000 kg table
Number, width and distance of T-slots table 8, 16, 105 mm
Cross-travel of the table (X) 1000 mm
Longitudinal table travel (Y) 700 mm
Vertical table travel (Z) 800 mm
Table feed speed range in the X axis 22 - 450 mm / min
Number of velocity ranges in the X axis: 5
Table feed speed range in the Y axis ...
4
SIP Hauser MP52, BJ 1981
Control Heidenhaim Heroes 4.19
B9wnceia3n
900x600x60
1
Sales only within Europe
Please give us your quote for the machine
-----
Without packaging; Technical data please see handout in attachment.
Caiwv0xcjn
German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations.
1
CNC machining center for profile steel (14 m)
SMA-REF-7006
Type: other
Manufacturer: Lescher
Model: 140 / 5
Year: 2006
Control: Bosch Typ 3 OSA
Spindle:
7,5 kW
max. 6.000 rpm
Tool changer (12 + 3)
X: 2.700 mm
Y: 1.000 mm
Z: 1.000 mm
Saw:
Bauer S500 DG
90 / 45°
500 x 500 mm
Working range:
X: 14.000 mm
Profile: 500 x 500 mm
Drilling alu: 30 mm
Drilling steel: 25 mm
Features:
2 x angular heads
Safety guard
Material cut conveyor
Condition:
in use
ready for your test
Location: Southern Germany...
6
Schiess /Klaassen SS50
Ø130
x6500
y4200
z1100
w1000
Control Heidenhain 430
rotary table 16 to u 2000 360°
Rotary table double pinion drive Master/Slav drive
Retrofit 1 in 2000
Qhz7l
Retrofit 2 in 2010
Documentation available
Mech./Elcetric/Hydraulic
SK50 Din 69871
2x CNC angle head
Tool changer 60 times
Chip conveyor
Machine is in a good new condition.
5
Rotational speed: 560-2400/min.
Sdsgyii
4
Screwdriving unit hf 400 1 speed BG5 with
gearbox VUK 3 D 316 and rotary table
Item number: MA 1128
Machine No.: 1004647096
Year of manufacture: 2010
weight: 250 KG
width: 880 mm
length: 1100 mm
B8habeabsd
Height: 2000 mm
Max. Spindle speed n= 55 1/min
Max. Torque: M max = 1000 NM
Connected load: 380 V
Accessories: operating instructions, parts list, circuit diagrams
13
HEAVY DUTY DEEP HOLE DRILLING MACHINES
Make : MGAD
Model : 350 x 10000
Spindle diameter : 800 mm
Spindle bore : 350 mm.
Drilling capacity : 200 mm
B39wx9roxl
Workpiece length : 2000 mm. ( You can drill on one side and then reverse the workpiece and drill on the other side).
THE MACHINE IS COMPLETE IN ALL ITS STANDARD ACCESSORIES AND PARTS, AND ITS IN EXCELLENT WORKING CONDITION.
7
Hold down for T-slot drill
C0qa7p9
8
VERNET BEHRINGER type MAP 304 Year 2008
Storage and loading system, 5 retractable cleat rippers length 4m
Input Bench Working Length 15m with CNC Trolley
MAP machine block including
1 disc marker
2 wing punching machines reference side
2 hallmarks of souls
1 shear 220 tonnes
Motorized 13m output bench on 4.5m with reversing clamp and parts evacuator.
Hydraulic power plant.
Control console with 15-inch TFT display and waterproof keyboard with integrated mouse.
Electrical cabinet with air conditio...
1
Pneum. Drilling and feeding unit make ROCKWELL Mod. A
Make # 46 LD 805
Technical data:
Speed 900 rpm.
admission MK 2
Bqu08g2
used
4
Was used for drilling rotor blade roots, including montage stations, machine was hardly used and is currently stored.
Ca3uder9mh
2
Drilling jig on base plate with three-jaw chuck as well as 2-fold height-adjustable and horizontally movable holder for a drilling machine.
Consisting of:
Three-jaw chuck AROWA, 250 mm Ø, horizontally rotatable by 380° with scale as well as indexing and clamping.
3tqton32d
Basic frame for holding a drilling machine guided on 2 columns and adjustable in height by means of a spindle,
on it in horizontal plane around 120 mm with scale adjustable admission.
On top of this, again on a round column, b...
3
Pneum. Tapping and feed unit make DESOUTTER type AFDK
Make # 27111
Technical data:
Tapping capacity 8,0 mm
speed 500 rpm.
with
- thread collet chuck
used € 450,--
1 dto make # 27110 € 450,--
1 dto fabrication # 27109 € 450,--
1 dto fabrication # 26928 € 450,--
Wobgorncw
1 dto fabric.# 26927 € 450,--
1 dto fabric.# 26644 € 450,--
6
X-travel: 1050mm, y-travel: 600mm, z-travel: 800mm, max. rotational speed: 8000/min, max. drilling depth: 1000mm, number of tool slots: 74, weight: 20t, operational hours counter: 27,489h, including chip conveyor, additional magazine and documentation.
T2a7vmzz
3
Pneum. Tapping and feed unit make DESOUTTER type AFDK
Make # 26507
Technical data:
Tapping capacity 6,5 mm
speed 800 rpm.
with
- thread collet chuck
used € 400,--
Cvcg88ao
1 dto make # 26508 € 400,--
3
X-travel: 2000mm, y-travel: 1600mm, z-travel: 600mm, W-travel: 1000mm, rotational speed: 3-2500/min, spindle diameter: 120mm, max. load: 6.3t, connected load: 71kW, weight: 19t, operational hours counter: 91,731h, including documentation.
Caibcxalu8
1
Electric hand drill Fabr. SIEMENS
M7s2v
Masch.# 60442435, built in 1942
Supply 220 V
with
-Chuck
not ready
3
Number of spindles: 4, spindle distance: 120mm, connected load: 30kW, without accessories.
Vzexvanh
1
Pneum. Drilling and feeding unit make ROCKWELL
Make # 46 LD 804
Technical data:
L3q3l
Speed 900 rpm.
drilling capacity 18 mm
with
- drill chuck thread
used € 450,--
2