MPP Tehnika

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, suction capacity: 30,000 m³/h, filter area: 152 m², actuation type: electric, total height: 3,500 mm, total length: 5,855 mm, total width: 1,920 mm, overall weight: 1,480 kg, Equipment: documentation/manual, The HOLZING RLA 1000 VIBER Power industrial stationary dust extraction unit is an advanced dust collection device designed for large production facilities and woodworking plants. Its design allows for outdoor installation, maximizing the use of space inside the production hall. Thanks to the integration of modern Viber Power technology, the unit continuously monitors operating parameters and automatically tracks the filter contamination level. The use of sound-absorbing enclosures for the fans effectively reduces noise generation, and the special blade geometry ensures maximum energy efficiency and stable vacuum pressure. Lhodpfx Adjzv Sx Iepsk

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment Lhedpfjzvz Tbox Adpsk

Condition: excellent (used), disassembly included in the price air return duct fan motor power: 15 kW screw conveyor total lock Lhodozvpxlspfx Adpsk 72 filter bags mechanical filter cleaning transfer fan for sawdust

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, power: 0.35 kW (0.48 HP), suction capacity: 400 m³/h, Capacity: 400 m³/h Negative pressure: 1250 Pa Motor: Type B5-71 with 2850 rpm Lhedszu Th Ijpfx Adpjk Connection: 380 V Total power consumption: 0.37 kW Machine weight approx.: 35 / 28 kg Machine dimensions approx. L x W x H: Ø 0.5 x 1.3 m

Condition: used, Dust extraction system Manufacturer: Spänex Type: Year of manufacture: Lodpfx Adszu Alpjpshk Technical data Note: The technical data and descriptions are copies of the original order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, Dust extraction system Manufacturer: Felder Type: RL 300 Year of manufacture: 2021 - Like new, never used - Technical data - Airflow rate: max. 6000 m3/h - Rated airflow rate at 20 m/s: 5090 m3/h - Negative pressure at the total connection at 20 m/s: 2680 Pa - Dust extraction connection (can be mounted on the left or right): 300 mm - Filter area: 50 m2 - Sound pressure: 75 dB - Chip collection container (liters): 2 x 250 l Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Lhjdpfx Aszu Ai Iedpjk

Condition: used, Year of construction: 2022, Extraction system Manufacturer: Schuko Type: Solo-160-2323/30/182/BD Year of manufacture: 2022 Technical data - Length x Width x Height: 2400x2400x10000 mm - Airflow: approx. 15,500 m³/h - Type of dust: Plastic, chips (dry) - Filter hose diameter: 160 mm - Filter hose length: 3000 mm - Total filter area: 182 m² - Rotary valve: 0.75 kW Note: Lhedpezu Ah Refx Adpok The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Return air and exhaust air ducting: The cleaned air is returned to the machine room via galvanized sheet metal ducts. The return air duct is connected to the upper part of the filter unit. A tested fire protection damper K 90 is installed in the area where the duct passes through the workshop wall. Technical data: Duct cross-section: 700x700 mm Return air velocity: 7.5 m/s Exhaust air velocity from the workshop: Ledpfjzu Ah Dox Adpehk

Condition: used, Year of construction: 2018, Dust extraction system Manufacturer: Nawara Type: RUBIN 2030 Year of manufacture: 2018 Technical data Application: - Designed for the extraction of dry dust and wood shavings - Suitable for woodworking and industrial dust extraction Performance: - Airflow rate: approx. 30,000 m³/h System features: - Stationary modular filter system - Warm air recovery system (summer/winter operation with adjustable damper) - Designed for continuous operation Compliance: Lhedpfx Aezuz S Ujdpjk - Complies with EU Machinery Directive 2006/42/EC - Complies with ATEX Directive 2014/34/EU (for potentially explosive atmospheres) - Meets the relevant Polish regulations on machine safety Air lock / discharge system: - Type: SL 1400 EX - Length: 1400 mm - Height: 360 mm - Connecting frame (top/bottom): 1490 x 420 mm - Drive type: Direct drive with elastic coupling (Rotex 38) - Gear motor: SEW R47 DRN80MK4 (Option: DRN90S4) - Speed: 15 rpm (Option: 29 rpm) Electrical data: - Power supply: 380 V / 50 Hz Dimensions (air lock unit): - L W H: 2000 x 420 x 360 mm Installation: - Complete external filter system included in the scope of supply - Internal piping within the factory included in the scope of supply, but subject to separate negotiations Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: used, Year of construction: 1995, functionality: unexamined, suction capacity: 10,000 m³/h, actuation type: electric, We are selling a dust extraction system from Wipos that we no longer need. We used the system to blow the chips into a container. The container is not included in this auction. Inspection is possible. Price is ex works; the buyer must dismantle the system. On-site support is available. No warranty is provided for the system! Lhodpfx Aozunzijdpsk

Condition: used, Year of construction: 1998, machine/vehicle number: 980919, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, volume flow: 3,450 m³/h, intake vacuum (max.): 3,550 mbar, suction capacity: 3,450 m³/h, intake manifold diameter: 250 mm, filter area: 23 m², total height: 2,959 mm, total length: 2,500 mm, total width: 1,238 mm, overall weight: 750 kg, Used clean air system for two to three woodworking machines operating simultaneously. Suitable for outdoor installation. New filters are included. The control system is equipped with a speed control function via a frequency inverter. Lhodpjzukulsfx Adpek

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, pipe silencer, silencer -Ventilation duct: Pipe silencer with spiral slit -Connection diameter: 100mm -Dimensions: Ø 210 x 675 mm -Weight: 3.3 kg Ledjzuaz Ujpfx Adpshk

Condition: good (used), Year of construction: 2016, Ventilation duct, ventilation damper, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper, fire damper, shut-off device -Manufacturer: TROX, ventilation duct fire damper shut-off device Ljdpfezuawvsx Adpohk -Type: FK-EU -Dimensions: 470/500/H420 mm -Weight: 18.4 kg

Condition: good (used), Year of construction: 2011, Ventilation duct, ventilation damper, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper, fire damper, shut-off device Lsdpfszuau Usx Adpjhk -Manufacturer: TROX, ventilation duct fire damper shut-off device -Type: FK -Dimensions: 390/390/500 mm -Weight: 16.9 kg

Condition: like new (used), Year of construction: 2026, Cyclone separator Lodpjztzmvofx Adpohk Cell wheel lock Piping Fan

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW - Fan 2: 3 kW - Press: 4.5 kW Lhsdpfxsztvwij Adpek - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Condition: excellent (used), Year of construction: 2017, SCHUKO, Type VALIDUS 160-2330/25/207/BK Year of manufacture: 2017, Airflow: approx. 80,000 m³/h Filter area: approx. 207 m² Lhodpfxszrk T No Adpok

Condition: excellent (used), Year of construction: 2009, Equipment: CE marking, Small mixing system for 3 gases with fluctuating withdrawal rates, mixture withdrawal possible from zero up to maximum capacity, independent of pressure fluctuations, rapid cycling withdrawal possible, lockable viewing panel for protection against accidental adjustment, splash-proof stainless steel housing. Technical data: Mixing range: Oxygen: (0-25% vol.) Carbon dioxide: (0-10% vol.) Ledpfxozrfmde Adpehk Argon: (0-100% vol.) Inlet pressure bar: min 6 bar - max 20 bar dynamic Outlet pressure bar: 3 bar Measuring pressure: 6 bar Volume flow: 0 - 173 NI/min Scope of supply: without container

Condition: new, 3 waste bags capacity 8000 m3/h Lhjdpfx Ajzqa Tiedpsk motor power 7.5 kW bag shaking mechanism air return channel power supply 380V

Condition: reconditioned (used), Year of construction: 1994, machine/vehicle number: 941108, functionality: fully functional, total height: 2,520 mm, total length: 2,580 mm, total width: 1,000 mm, Compact dust extraction system with 3 chip collection bags – WITHOUT fan Nominal air flow rate: 5000 m³/h with existing fan – up to 7500 m³/h possible Filter area: 37.5 m² Filtration technology: AL-KO Opti-Jet system consisting of compressed air cleaning (sequence-controlled) and surface filtration Chip collection capacity: 8 solenoid valves Ljdjzqan Hjpfx Adpohk Suction nozzle: DN 355 mm Compressed air connection: 1", compressed air, water and oil-free Minimum compressed air consumption 8.5 bar: 1140 NL/cleaning cycle Operating pressure: maximum 8.5 bar Fire extinguisher connection: 1 x 1 1/2" Dimensions WxD approx: 2572 x 981 mm Height approx: 2520 mm Weight without filter approx: 457 kg JET cleaning: A pressure surge on the inside of the filter achieves effective cleaning of the filter hoses on the outside. Easy maintenance: large access doors facilitate filter maintenance, additional inspection covers High-quality filter material: oil and water-repellent surface coating of the filter, for problematic dusts (paint sanding dust, wet dust), filter washable Uniform bag filling: infinitely adjustable distribution flaps enable uniform bag filling Suitable fan: see item no. 7458 D=250 mm - 5000 m³/h extraction capacity With a fan D=350 mm, up to 7500 m³/h extraction capacity is possible!!!

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, only a few operating hours Equipment and technical data: Stationary clean-air filter system ECO JET DUO 6 XL ZRS for extracting wood dust and chips Fans: 2 × 7.5 kWAir volume: 10,000 m³/hNegative pressure: 2,700 Pa (total) / 2,200 Pa (static)80 filters à 2.50 m, BIA Category M, electrically conductive, incl. support cagesFilter area: 77.6 m²Filter surface loading: 129 m³/(m² × h)Filter cleaning: AL-KO OPTI-JET®Pressure relief area: 0.84 m² (bursting discs)Base frame with discharge hopper and rotary valve; dry discharge with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm intermediate section for increasing unit height with 2 suction openings Base frame with discharge hopper and ZRS 960/1 FG rotary valve for chip disposal via on-site transport fan into an existing silo or similar; DN 200 transport pipe, approx. 1,260 mm, connection on site ZRS 960/1 FG Rotary valve: ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (indoor/outdoor); EX D; FSA 11 ATEX 1614XMotor: 0.18 kW / 0.78 A, 3 Ph / 400 V / 50 HzProtection class: IP 54 / B3; Insulation class FSpeed: 41 rpm; Capacity: 15,744 l/h*; 7 cellsInlet/outlet: 960 × 250 / 960 × 208 mmDimensions: 1,100 × 605 × 330 mm; Temperature range: up to 50 °C Further equipment: 400 mm suction connection with non-return flap in rectangular ductECO JET backflow flap 910 × 346 × 500 mm AL-KO Control System ACS II: Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage and integrated frequency inverter for cascade control of 2 fans up to 37 kW Plain-text fault display with common fault lamp; manual discharge start via display button; manual cleaning start via push button; cleaning via differential pressure; post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval display; control cabinet lighting and ventilation; monitoring of fire damper, residual dust sensor, level sensor and max. filter pressure 10 individually controlled solenoid valves 4-group slide control for up to 8 machines: control via potential-free contact (PFK) or induction coil; 24 V DC motorised or electro-pneumatic slide gates; max. 4 panels per conveying line Power section ZRS up to 0.18 kW; time settings adjustable via touchscreen Bursting disc sensor and evaluation unit; pressure transmitter for inverter; pressure switches; warning beacon; 2 × PTC monitoring; rotary valve speed monitoring Exhaust/return air changeover 24 V DC for summer/winter operation Filter monitor/residual dust monitoring with evaluation unit according to DIN EN 12779 and H3: if 0.3 mg/m³ is exceeded, a self-latching alarm is triggered and the recirculation air damper automatically switches to exhaust air 10-way terminal box 24 V/230 V, fully wired for filter cleaning, incl. approx. 6 m cable Pipe system incl. bends, branches, reducers, PU hoses, machine connections, small parts and EP slide gates for extraction of 11 woodworking machines + 1 HRS according to specification Return air according to TRGS 553 with changeover damper and fire damper Galvanised base frame for container loading Paddle switch 24 V–230 V with socket for level indication in the discharge hopper Dimensions: 2,092 × 2,000 × 5,292 mm Lhsdpszlbqrsfx Adpjk Inspection possible in assembled condition in 06667 Weißenfels. Price incl. dismantling. Availability: Short notice Location: ...

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 22093, functionality: fully functional, volume flow: 4,000 m³/h, filter area: 24.7 m², total height: 3,420 mm, total length: 2,000 mm, overall weight: 725 kg, TECHNICAL DETAILS Filter area: 24.7 m² Volume flow rate: 4,000 m³/h Negative pressure: 2,110 Pa Suction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar MACHINE DETAILS Connected power: 5 kW Motor power: 4 kW Rated speed: 2,925 rpm Rated operating voltage: 400 V Type of current: Three-phase (3 Ph) Rated current: 9.2 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 3,420 mm Weight: 725 kg EQUIPMENT Ledpfx Adezktr Ejpjhk New filters

Condition: used, Year of construction: 2017, machine/vehicle number: MR007053, Extraction unit with briquetting press, the machine is in good condition and ready for immediate use. The extraction unit is equipped with a Falach 35 briquetting press. The extraction system includes: - Electrical coupling between the extraction unit and the briquetting press (in case of a briquetting press failure, the extraction unit stops) - Automatic start of the briquetting press - Briquetting press capacity - approximately 35 kg/h (depending on the type of dust) Technical specifications: - Airflow (m3/h): 6000 - Dimensions (L x W x H): 3,120 x 1,050 x 3,350 mm Lsdpfx Adjzhmm Djpshk - Diameter of extraction inlet: 300 mm - Motor power (kW): 7.5 kW

Condition: ready for operation (used), Year of construction: 2018, We offer for sale a industrial extraction and filtration system designed for efficient removal of sawdust, wood chips, and dust from woodworking machines. The system is suitable for medium to large production facilities and ensures high filtration efficiency with stable and reliable performance. Key Features & Benefits High-capacity central extraction system Designed for woodworking industry (chips, sawdust, dust) Complete filtration with clean air return to production hall Robust industrial design High filtration efficiency (approx. 99.985%) Integrated multi-branch extraction system Technical Specifications Filter Unit Model: FZŠ-H-C-7 Filtration area: approx. 528 m² Number of filter hoses: 352 pcs Separation efficiency: 99.985% Dimensions Approx. 8,081 × 2,450 × 6,245 mm Cleaning System Automatic cleaning via 6 vibration motors (EVK 150 W each) Extraction Performance The system includes multiple extraction branches with different capacities: Branch 1: approx. 13,700 m³/h, 18.5 kW Branch 2: approx. 10,900 m³/h, 15 kW Branch 3: approx. 10,900 m³/h, 15 kW Branch 4: approx. 10,900 m³/h, 15 kW Branch 5: approx. 8,350 m³/h, 11 kW Branch 6: approx. 8,350 m³/h, 11 kW Fans included: 1 × 18.5 kW 3 × 15 kW 2 × 11 kW Total Installed Power Approx. 89.7 kW System Description Central filter with multi-branch ducting system Suitable for connection to multiple woodworking machines (e.g. saws, CNC, optimizing saws) Chip and dust separation with air recirculation Designed for continuous industrial operation Ledpfx Aezgtkmjdpehk Condition & Sale Terms Condition: Good working condition Complete system available (filter + fans + ducting as per scope) Dismantling and transport to be arranged by the buyer Additional Offer A smaller and newer version of this extraction system is also available for sale: Installed power: approx. 29.5 kW Suitable for smaller production capacities Advantages High performance and filtration efficiency Proven industrial solution Scalable for different production setups Reliable and low-maintenance operation

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake manifold diameter: 350 mm, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, Schuko Intermediate Filter System “Eco Var 04” Professional dust extraction system Schuko Eco-Var 04 (year of manufacture 2004) – complete system including piping, control system, and emission permit. For sale is a powerful and fully functional industrial dust extraction system from the premium manufacturer Schuko, type Eco Var 04 (year of manufacture 2004). The system is ideally suited for woodworking companies for efficient extraction of chips and dust and is offered including an extensive pipe and control system infrastructure. Technical data & equipment • Manufacturer: Schuko • Model series: Eco Var 04 (intermediate filter system) • Year of manufacture: 2004 Lhjdpozddwgsfx Adpok • Drive power: approx. 11 kW (powerful, efficient fan) • Discharge: Rotary valve airlock with 5 sealing lips (ensures safe, pressure-loss-free material discharge into containers, silos, or briquetting presses) Extensive accessories & infrastructure (included) • Pneumatic valves: approx. 20 units for automatic shut-off of individual machine connections. • Pipe & hose system: approx. 80 meters of robust extraction pipe including the corresponding flexible hoses. • Pneumatic infrastructure: compressed air connections including all associated pneumatic hoses for valve control. Product advantages & condition • Complete package: No tedious searching for individual parts – from the filter system to the piping and the complete control and pneumatic system, everything is available for workshop installation. • Robust industrial quality: The Eco-Var series from Schuko is known for its durability, high filter area, and reliability in daily workshop use. • Energy-efficient: Thanks to the approx. 20 pneumatic valves, the extraction performance is only provided where work is currently being carried out, which saves a lot of energy. Note for buyers: The system is in a well-maintained and fully functional condition, appropriate for its age. Inspection can be arranged.