Fa. Stöttner

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 38 mm, turning diameter over bed slide: 300 mm, turning diameter over top slide: 200 mm, center height: 150 mm, turning length: 610 mm, total length: 1,320 mm, total width: 610 mm, total height: 1,250 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 75 rpm, Model: GH 1230 Year: 2015 Swing Over Bed: 300mm Swing Over Top Slide: 200mm Distance Between Centres: 610mm Spindle Speeds: 75-2000 RPM Spindle Bore: 38mm Machine With: Digital Readout 3 Jaw Chuck 4 Jaw Chuck Some Tooling Dimensions: 1320 x 610 x 1250mm High Gjdpfx Agjzlhukslobp Weight: 520 KGS

Condition: used, total length: 2,000 mm, total width: 900 mm, total height: 1,600 mm, Colour: Grey Empty weight: 1.000 kg Price: On request Gbsdszlht Tepfx Aglep - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 160 - Swing over bed [mm]: 320 - Carriage turning diameter [mm]: 180 - Distance between centres [mm]: 750 - Bed width [mm]: 280 - Spindle bore [mm]: 40 - Min. spindle speed [rpm]: 65 - Max. spindle speed [rpm]: 2000 - Options: Removable bed, Digital readout - Swing over removable bed [mm]: 420 - Transport dimensions: 2000mm x 900mm x 1600mm (l x w x h) - Transport weight [kg]: 1000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1979, 1 used lead screw and turret lathe Manufacturer: Weiler Type: Commodor Technical data: Gbsdpfx Agjzlgxneljp Center height: 190 mm Swinging diameter over bed: 380 mm Swinging diameter over cross slide: 190 mm Distance between centers: 1000 mm Spindle bore: 56 mm Spindle mounting: DIN 55027 size 6 (A2-6) Spindle taper: MK 6 Spindle diameter in the front bearing: 90 mm Speed range: 25 – 2000 rpm Number of speeds: 18 steps Longitudinal feed: 0.026 – 0.90 mm/rev Cross feed: 0.013 – 0.45 mm/rev Metric threads: 0.3 – 10 mm Inch threads: 80 – 2.75 threads/inch Tailstock quill stroke: 150 mm Tailstock quill taper: MK 4 Dimensions: Length: approx. 230 cm Width: approx. 110 cm Height: approx. 200 cm Weight: 1600-1700 kg with digital display

Condition: good (used), functionality: fully functional, turning diameter over bed slide: 335 mm, center height: 165 mm, turning length: 635 mm, swing diameter over cross slide: 210 mm, rotational speed (max.): 1,800 rpm, quill mount: MK 3, three-jaw chuck diameter: 200 mm, For sale is a Colchester lathe in good, used condition, as can be seen in the pictures. Godszlcrqspfx Aglsbp Technical data: • Manufacturer: Colchester • Model: Student-1800 • Distance between centers/turning length: approx. 635 mm • Center height: approx. 165 mm • Turning diameter over bed: approx. 335 mm • Turning diameter over carriage: approx. 210 mm • Max. spindle speed: approx. 1800 rpm • Spindle bore: approx. Ø40 mm • Three-jaw chuck: approx. Ø 200 mm • Spindle nose: 4 in. D.1. Camlock • Tailstock spindle: MK3 • Condition: Used, functional Shipping costs via freight forwarder are possible (please inquire, providing your postal code). International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Condition: used, Parallel Lathe SOCOMO type STAR 305 Between points: 700 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 175 mm Spindle diameter: Ø 36 mm Rotation: from 70 to 2000 RPM 3-jaws chuck Ø 200 mm Gbsdpfx Aezku N Eoglsp Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Length: 1800 mm Depth: 800 mm Total height: 1200 mm Weight: approx 1 T

Condition: used, Parallel Lathe GEMA LZ 160 Between points: 1000 mm Gbsdpfx Agjzku Nxolop Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T

Condition: used, Year of construction: 1986, Available immediately from a workshop for disabled workers: L & Z lathe, Imatec Type ID 175 Year of manufacture: 1986 Center height: 175 mm Diameter over bed: 350 mm Diameter over carriage: 210 mm Distance between centers: 1000 mm Spindle bore: 41 mm Spindle speeds: 35.5 – 1600 rpm Digital display Gsdpfx Agozi Hq Ejlobp Chuck Faceplate Multifix system with holders Coolant system Drive power: 3 kW Weight: 1700 kg Price: EUR 2,250.00 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 1991, Turning lathe, VOEST-ALPINE-STEINEL, Type: DA 180, Year of manufacture: 1991, with 2-axis digital display ELESTA. Gbodpfxsziwy Rs Aglep Center height: 180 mm Distance between centers: 1000 mm Spindle bore: 52 mm Spindle speeds: 44-2000 rpm Chuck diameter: 200 mm, Tool holder: MULTIFIX - B. In ready-to-use condition.

Condition: excellent (used), Year of construction: 2009, These very good, used universal lathes come from a training center and are being sold due to restructuring. There are 3 units available! Center height 180 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Gbsdpfsziuybsx Aglop

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Weiler Commodor B Turning diameter: 380 x 1000 Spindle speeds: 25 - 2000 Spindle bore: 56 Godpfx Agozh Nuqslsbp 2-axis Heidenhain digital control Chuck: Collet chuck 200 Multifix B with 4 holders Tailstock Mk 4, rotating center, quick-change chuck Safety features: electrically monitored chuck guard, power-on protection, spindle brake, splash guard, 2 x emergency stop, documentation. Condition: very good, guides and smooth operation are flawless, test run with a 100 mm workpiece showed a parallelism of 0.02. All functions are working properly. Of course, the machine can be inspected while powered on. Free loading at D - 88433 Schemmerhofen.

Condition: good (used), Year of construction: 1989, functionality: fully functional, Wagner DCG 160 precision guide and lead screw lathe – year of manufacture 1989 Technical data Gbedozhityopfx Aglop Manufacturer: Wagner Maschinen Model: DCG 160 Year of manufacture: 1989 Swing over bed: 160 mm Maximum turning diameter over bed: approx. 320 mm Distance between centers: approx. 750–1,000 mm Speed range up to approx. 2,000 rpm Guide and lead screw Longitudinal and cross feed Threading unit 380 V Equipment 3-jaw chuck Quick-change tool holder Tailstock Work light Coolant system Description Robust German precision lathe for toolmaking, maintenance, training, and the production of individual parts. The machine is in good used condition and is fully equipped. Ideal for workshops, training centers, or general mechanical engineering.

Condition: good (used), turning diameter over cross slide: 350 mm, spindle bore: 50 mm, turning diameter: 600 mm, center height: 1,000 mm, Behringer lathe with a wide range of accessories. Gsdpfx Aozg Aywsgljbp

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Weiler Praktikant 160 B lathe with guide and draw spindle, built to toolmaker precision, year of manufacture 2001, with 3-axis digital display K&C NEW, in very good condition, CE compliant. Technical data: >> Year of manufacture 2001, machine no. 4836 >> Center height 160 mm >> Center distance 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference point, tool programming 200 items, taper calculation, radius/diameter, quick zeroing, switching of the counting direction >> Quick-change tool holder with collets from 3 to 28 mm, increasing in steps of 1.0 mm >> New 3-jaw chuck 160 mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> Coolant system Godpfx Aozgcnuoglebp >> Electric spindle guard >> Machine feet >> Bed stop >> Splash guard >> Operating manual, parts list About the machine: Offered is a Weiler Praktikant 160 B lathe with guide and draw spindle, year of manufacture 2001, in very good condition. A very nice lathe with a protective device for the working spindle. The slides all move very easily and smoothly. Even at high speeds, the Weiler runs smoothly. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display from K&C makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 2001, LZ lathe, manufacturer GDW, type: LZ 360 S, year of manufacture 2001 with 3-axis digital display, Heidenhain, chuck 160 mm Röhm, LED machine light, coolant system, tool holder Multifix - B with 2 tool pockets, tailstock mount MK3, center punch, machine documentation. Center height: 175 mm Distance between centers: 800 mm Spindle bore: 43 mm Spindle speeds: High range: 30-750 rpm / Low range: 150-3000 rpm Machine is in very good condition, guideways are in very good condition. See photos of the test run. Gbedpfx Agozfwtpslop Space requirement: 2050 x 1000 mm, height 1400 mm, weight approx. 1000 kg. Further data can be found on the machine data sheet.

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 Gbodpfx Aezd Tycegljp >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 14076, Offer 26143 Technical data: - Maximum turning height 165 mm - Maximum turning length 750 mm - Turning diameter over bed 330 mm - Turning diameter over compound slide 170 mm - Spindle bore 42 mm Gjdszdq I Repfx Aglebp - Taper of tailstock quill MK 3 - Travel of tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + facing - Metric thread pitches - Inch threads - Module threads - Drive 400 V / 1.5 / 2.8 kW - Including: - 2 x 3-jaw chuck - Steady rest - 4 x HSS tool holders - Various turning tools - Space requirement approx. B 1800 x H 1150 x D 900 mm - Weight approx. 800 kg

Condition: good (used), Year of construction: 2006, CAZENEUVE OPTICA 360 CNC - NUM - 2006* *CNC training/production lathe – Very recent for an Optica – CE marked* *1. Identification* Make: CAZENEUVE S.A. - Pont-Évêque Gbsdpfx Ajzc Ul Ssglep Model: OPTICA 360 Serial Number: 5055 Year: 2006 - CE Marking Control: NUM Distance between centers: 750 mm Spindle bore: Ø 54 mm *2. Why this 2006 model?* It is one of the last Optica 360 models produced. Therefore: 1. *NUM Control*: Reliable, parts and service are still provided by NUM. It is the standard in France. 2. *Year 2006*: Less wear, more modern electronics than models from the 90s. 3. *3 Cazeneuve modes*: Manual / Training / CNC. Ideal for a general mechanical workshop or vocational school. 4. *Robust*: Cast iron bed, 7.5 kW. You can switch from machining brass to pre-treated materials without any issues. *Condition*: Very clean for a 2006 machine. Original white/blue paint, no damage. Machine is on blocks, stored in a dry place. Can be seen powered on. *3. Technical Specifications* Characteristic | Value Ø over bed | 360 mm Ø over carriage | 200 mm Distance between centers | 750 mm Spindle bore | Ø 54 mm Spindle nose | A2-5 Spindle power | 7.5 kW Spindle speed | 50 to 3500 rpm Control | NUM 1020 / 1050 *Specify if you know which one* Weight | ~2300 kg *4. Included Equipment* - 3-jaw chuck Ø 200 - Rotating tailstock CM4 - Full splash guard with door safety interlock - Operator panel + NUM screen - Lighting - Cazeneuve technical documentation + NUM schematics - Basic tooling

Condition: used, centre distance 2.000 mm turning diameter over bed 350 mm swing over plan sled 470 mm bed width 525 mm turning speeds 25 - 1.250 U/min power capacity 18 kW spindle bore 92 mm spindle head ISO 702-3 Gr. 15 diameter of quill 145 mm Inner cone of the quill MK 6 Gedpfx Aezczhmegljbp longitudinal feed 0,035 - mm/-1 face feed 0,009 - 8,0 mm/-1 metrical thread cutting 0,5 - 304 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. The guideways are in very good condition. Technical features & accessories: - various accessories Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: good (used), functionality: fully functional, Internal article number: 26049 Lathe Weiler Commodor + 2-axis digital display Heidenhain + Multifix "B" base holder + Chuck guard Gbjdszb Nmujpfx Aglep Technical data: Max. turning diameter over bed: 380 mm Max. turning diameter over cross slide: 190 mm Max. turning length: approx. 1000 mm Bar capacity: approx. Ø 56 mm Spindle speed range: approx. 13 – 2000 rpm Spindle nose: A2-6 Drive power: approx. 4.0 kW Feeds & threads Automatic longitudinal and cross feeds Feed range: approx. 0.011 – 0.80 mm/rev Tailstock MK4 L × W × H: approx. 2500 × 1200 × 1800 mm Weight: approx. 1500 kg The machine is fully functional and can be inspected under power by arrangement in our heated storage area of over 500 m².

Condition: good (used), functionality: fully functional, spindle bore: 40 mm, turning diameter over bed slide: 200 mm, center width: 800 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 50 rpm, overall weight: 800 kg, For sale is a lathe manufactured by NARDINI, type MS 175 E. The machine is in good condition. Technical data: Manufacturer: NARDINI Type / Model: MS 175 E Machine type: Lead screw and feed screw lathe Center height: 175 mm Distance between centers: approx. 800 mm / 1,000 mm (depending on bed length) Swinging diameter over bed: 350 mm Swinging diameter over cross slide: 200 mm Spindle mounting / internal taper: Camlock / MK 5 Spindle bore: approx. 40 – 42 mm Tailstock mounting: MK 3 Speed range: approx. 50 – 2,000 rpm (mechanically adjustable) Min. speed: approx. 50 rpm Max. speed: approx. 2,000 rpm Feeds & threads: Longitudinal and transverse feeds; switchable for metric threads, inch threads, module and diametral pitch. Drive motor power: approx. 3.0 kW / 4.0 kW Power connection: 400 V / high voltage Total weight: approx. 850 – 1,000 kg Upon request, transport and loading can be arranged throughout Europe for an additional fee. Gjdozb Iczepfx Aglebp Prices are exclusive of VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: ready for operation (used), L & Z Lathe WEILER Praktikant 800 R -Turning diameter over bed: 300mm -Turning diameter over cross slide: 150mm -Turning length: 800mm -Spindle bore: approx. 42mm -Speed range: 40 - 2000 rpm -Automatic longitudinal/facing feeds -Threading / Metric / Inch, etc. -Tailstock: MK 3 -Three-jaw chuck -Chip guard & work light -Chip tray -Change gears -Tool cabinet & operating tools -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight: 800 kg Gbodezbiyhjpfx Aglsp Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2012, Colchester Student 2500 Gap Bed Centre Lathe (2012) Ex Research Machine Super Condition Swing over Bed 330mm Swing in Gap 480m Swing Over Cross Slide 210mm Distacne Between Centres 635mm Spindle Bore 40mm Spindle Nose D1-4 Spindle Speeds 40 – 2500rpm Spindle Power 2.2kW Supplied with: 3 Jaw Chuck with Forwards and Reverse Jaws Tool Holders as Picures QCTP Gbodpfx Asy U Rtwjglop Coolant Tool Box 5C Collet Chuck Chuck Keys 3 Phase 415V Electics For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79230 Machine Serial Number: 308029 Cost: £7,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Weiler Praktikant 160 AC Precision center lathe, 3-axis digital display, Weiler with AC drive, stepless speed control, CE marking!!!!! Technical data: >> Year of construction 1995, Machine No. 3820 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: up to 3000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 1000 kg Gjdpfoy Ulqwox Aglsbp >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and equipment: >> 3-axis digital display Weiler >> Quick-change toolholder system with toolholders from 2 to 28 mm, in 1 mm increments >> 3-jaw chuck 160 mm, new, with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic chip guard >> Machine feet >> Splash guard >> Bed stop For safety: Electronic chip guard for the main spindle, cover for the lead and feed screw, brake motor, 2 emergency stop switches, electrical safety switch for the gearbox About the machine: Offered is a Weiler Praktikant AC center lathe with lead screw and feed screw, year of construction 1995, in very good condition. A very nice lathe with AC drive and stepless speed control of the main spindle. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Weiler has a CE marking. The machine comes from a training workshop. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site while it is powered on and convince yourself of its condition.

Condition: excellent (used), functionality: fully functional, spindle bore: 46 mm, turning diameter over bed slide: 350 mm, turning diameter over top slide: 200 mm, center height: 175 mm, turning length: 800 mm, spindle speed (max.): 2,000 rpm, three-jaw chuck diameter: 200 mm, A Nardini lathe is for sale in good used condition, as shown in the photos. Technical specifications: • Manufacturer: Nardini • Model: MS-175E • Center-to-center distance/turning length: approx. 800 mm • Center height: approx. 175 mm • Turning diameter over bed: approx. 350 mm • Turning diameter over carriage: approx. 200 mm • Max. spindle speed: approx. 2,000 rpm • Spindle bore: approx. Ø46 mm • Röhm four-jaw chuck: approx. Ø 200 mm • Condition: Used, in working order Shipping via freight forwarder available (inquire for ZIP code) Godpjy Ughkjfx Aglobp International buyers are welcome! You will receive an invoice with VAT shown. Viewing/pickup is possible by appointment in 42855 Remscheid. Sale from location 42855 Remscheid, ex works. Subject to errors in technical data and prior sale.

Condition: used, Year of construction: 2003, turning diameter over bed 330 mm centre distance 1.000 mm Gbsdpfey Ty I Isx Agljp centre height 167 mm spindle bore 38 mm turning diameter over cross slideways 210 mm spindle tunring speed 40 - 2.500 U/min x-axis 190 mm z-axis 92 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!