Dél-Plast Zrt.

Year of construction: 2004, condition: used, Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible. Bledpfx Afozybu Hexsl

Year of construction: 2005, condition: used, Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible. Bodozybvqepfx Afxoll

Year of construction: 2008, condition: used, Clamping force: 650kN, length: 4000mm, width: 1600mm, height: 2200mm, weight: 3.9t, an on-site inspection is possible. Blsdpfxszybvks Afxol

Year of construction: 2005, condition: used, Clamping force: 1600kN, width: 1600mm, height: 2200mm, weight: 6.8t, an on-site inspection is possible. Blodpezybvdofx Afxjl

Year of construction: 2001, condition: used, Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible. Blsdpfx Ajzybu Tofxel

Year of construction: 1990, condition: used, ENGEL - ES 700/150 150 ton, 392 cm³, Strok: 420 mm Bljdezxrd Aspfx Afxol

Year of construction: 2012, condition: excellent (used), Years: 1x 2012 Bedpfx Ajzw Dz Refxjll 1x 2011 1x 2010 1x 2006 2x 2008 (Is possible to buy 6 pieces)

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic ejector • Side air valve Bodpszw Atlefx Afxell • Robot interface • 4-zone mold temperature control system Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Extra Information Machine still under power

Condition: used, Condition: used, with visible signs of use, was operational until placed in storage, control voltage: 24V, operating voltage: 230V, frequency: 50Hz, CO₂ pressure: 10bar, connected load: 500W, with CE marking. An on-site inspection is possible. Bsdpfx Afszwgikjxell

Year of construction: 2004, condition: used, A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/800mm, opening stroke: 950mm, max. mold height: 970mm, oil capacity: 900l, connected load: 55kW, operating hours: approx. 82510h, weight: approx. 20.4t. The servo motor for the screw drive is defective. In addition, some smaller parts are missing. An on-site inspection is possible. Bedpfx Aezvy E Aefxjll

Year of construction: 2008, condition: used, A Demag all-electric injection molding machine with Wittmann 3-axis robot and safety enclosure is offered. Clamping force: 1500kN, locking force: 1650kN, max. mold opening stroke: 495mm, min./max. mold height: 275mm/585mm, max. distance between mold platens: 1080mm, mold platens X/Y: 770mm/770mm, clear distance between tie bars X/Y: 520mm/520mm, max. mold weight: 1700kg, max. mold weight on the movable mold platen: 1150kg, ejector stroke: 125mm, ejector force: 35kN, ejector retraction force: 35kN, screw diameter: 35mm, L/D ratio: 20, max. injection pressure: 2430bar, stroke volume: 166cm³, shot weight: 146g, max. metering stroke: 173mm, max. nozzle stroke: 400mm, nozzle immersion depth: 20mm, nozzle contact force: 30kN, installed barrel heating capacity: 9.4kW, material hopper capacity: 35l, control: CDIAS, operating hours: approx. 76000h, machine weight: approx. 7400kg. Including WITTMANN 3-axis robot, year of manufacture: 2006, travel X/Y/Z: 550mm/1200mm/2000mm, robot weight: approx. 240kg as well as safety enclosure and 1 × core pull preparation AS. Documentation available. An on-site inspection is possible. Blsdezvginspfx Afxol

Year of construction: 2006, condition: used, Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is possible. Bsdpfxozun Uvo Afxsll

Year of construction: 2003, condition: used, Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible. Blsdpfx Afjzun Upsxjl

Year of construction: 2014, condition: ready for operation (used), An ENGEL injection molding machine is offered. Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: approx. 12200kg. Documentation available. An on-site inspection is possible. Blsdpfx Afozt Slpexel

Year of construction: 2017, condition: ready for operation (used), Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible. Bledpfx Afeztzqzsxel

Year of construction: 1991, condition: ready for operation (used), A repair-needing Arburg injection moulding machine is offered. Clamping force: 850kN, distance between tie bars X/Y: 320mm/320mm, mould mounting platens X/Y: 490mm/490mm, min. mould height: 250mm, max. opening stroke: 375mm, max. platen daylight: 625mm, ejector stroke/force: 150mm/38kN, screw diameter: 35mm, max. stroke volume: 144cm³, max. shot weight PS: approx. 120g, max. injection pressure: 1500bar. Machine weight: approx. 2500kg. Heater was removed, hydraulic pump runs unevenly. An on-site inspection is possible. Blodeztra Hopfx Afxjl

Year of construction: 2008, condition: ready for operation (used), A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement. Bodpfx Aszta D Hefxjll

Year of construction: 2013, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 2 units available, this machine offers reliable performance for your production needs. If you are looking to get high-quality plastic processing capabilities, consider the Krauss Maffei 35-180 CX machine we have for sale. Contact us for further details. • Axes: not applicable • 2 units available (80 & 81)(82 is sold) • Plasticising size 180 • Plasticising arrangement H • Screw diameter 28 mm • Nozzle radius 10 mm Blodpfx Afozr H Snexol • Nozzle bore 4 mm

Condition: excellent (used), Two ARBURG ALLROUNDER 270 S injection molding machines from a cleanroom production environment. In excellent condition! Blsdpfx Aszrvhlefxjl Price for both machines: only €14,000.

Condition: ready for operation (used), The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico. Bodpfx Aszrn Hmsfxjll

Year of construction: 2010, condition: ready for operation (used), A fully hydraulic large-format two-platen injection molding machine from Krauss Maffei with an LRX350 linear robot is available. Clamping force: 6500kN, injection unit: SP3000, screw diameter: 70mm, L/D ratio: 22.9, max. injection pressure: 2389bar, shot volume: 1232cm³, shot weight: 1121g, injection rate: 462cm³/s, screw speed: 285rpm, plasticizing rate: 108.6g/s, nozzle contact force: 129kN, mold opening force: 345kN, mold opening stroke: 1150mm, min. mold height: 600mm, max. daylight opening: 1750mm, ejector stroke: 250mm, ejector force: 95kN, max. mold weight: 11400kg, clear distance: 1200mm/1120mm, platen dimensions X/Y: 1510mm/1370mm. Robot payload: 35kg, travel X/Y/Z: 1200mm/2000mm/4000mm, conveyor dimensions X/Y: 2500mm/800mm, discharge height: 1000mm, max. conveyor belt temperature: 70°C. Machine dimensions X/Y/Z: approx. 8000mm/3000mm/2700mm, weight: approx. 31t, operating hours: approx. 75900h. Documentation available. An on-site inspection is possible. Available from approximately November 2026. Blsdpfszqfwyjx Afxel

Year of construction: 2010, condition: ready for operation (used), Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible. Bsdpjznx Hijfx Afxoll

Year of construction: 1994, condition: ready for operation (used), A hydraulic Battenfeld plastic injection molding machine is offered. Clamping force: 1000kN, screw diameter: 40mm, shot weight: approx. 183g, mold mounting platens X/Y: 700mm/700mm, shot volume: 201cm³, max. injection pressure: 1968bar, max. screw speed: 290rpm, nozzle contact force: 79.2kN, machine cycles: approx. 1985087, operating hours: approx. 53578h, control system: Battenfeld UNILOG 4000. Dimensions: approx. 5440mm/1550mm/2300mm, weight: approx. 5060kg. Motor, pump and inverter renewed in December 2009. An on-site inspection is possible. Blodszl Enhspfx Afxjl

Year of construction: 2011, condition: ready for operation (used), A virtually new and almost fully equipped Arburg vertical injection molding machine from a laboratory is available, where its plasticizing unit was never used. Clamping force: 500kN, opening force: 30kN, opening stroke: 250mm, ejector force: 30kN, ejector stroke: 70mm, screw diameter: 25mm/30mm/35mm, nozzle contact force: 50kN, nozzle retraction stroke: 210mm, heating capacity: 9kW, heating zones: 5, hopper volume: 25l, technology level: T2, rotary table diameter: 900mm. Machine dimensions X/Y/Z: approx. 3400mm/2050mm/3500mm, weight: approx. 4200kg, operating hours: 9201h, machine cycles: approx. 120k. The machine was used exclusively for composite materials such as carbon fiber and Kevlar. Documentation available. An on-site inspection is possible. Bledpfx Aezd Ehxefxel

Condition: excellent (used), Wittmann Battenfeld Type: SmartPower 210 Wittmann Battenfeld injection molding machine with UNILOG B8 control For use with thermoset materials Current software version: IO4.26 The machine was serviced/inspected and brought up to the most current possible standard by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in 2026. In addition to the pressure switches already present, the machine can be equipped with two additional mold internal pressure switches (Kistler module for mold internal pressure switching, range 1: 20,000 pC, range 2: 10,000 pC). The parts for the mold internal pressure switch upgrade are included in the scope of supply. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: 137949-100 Machine weight, gross/net Main dimensions of the machine Noise level (DIN EN ISO 3744-46): 65 dB(A) Ambient temperature: +15 - +40°C (+59 - +104°F) Year of manufacture: 2017 Operating hours: 1437 hours Hydraulic system: Hydraulic oil, tank capacity Oil temperature min / max. (HLP 32): min 30°C (86°F) / max. 40°C (104°F) Oil temperature min / max. (HLP 46): min 40°C (104°F) / max. 50°C (122°F) Switching temperature for oil cooling (HLP 32): 35°C (95°F) Switching temperature for oil cooling (HLP 46): 45°C (113°F) Electrical system: Drive power, hydraulic pump: 37kW Motor voltage Blsdpfxszdywns Afxjl Frequency Water system: Oil cooler: Cooling water consumption: approx. 0.5 - 1.5 m³ / h (0.65 - 1.96 cu yd) Cooling water inlet max. 35°C (95°F), NW ⅜" Cooling water battery: Cooling water inlet ∅ ¾", max. 10 bar (max. 145 psi) Cooling water outlet ∅ ¾" Number of heating zones including nozzle: 5 Closing unit: SmartPower 210 Clamping force: 2100kN Type: SmartPower 210 Condition: used Scope of supply: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.