KM-Plastic Machinery

Condition: like new (used), Year of construction: 2023, operating hours: 20 h, functionality: fully functional, - Manufacturer: HAMATEC - Model: H22149 - Year of manufacture: 2023 - Single-screw extruder Ø20mm 25LD - Analog controls - Screw profile: soft PVC - 3 heating zones on the barrel - 2 heating zones on tooling - Melt temperature and pressure sensor - Up to 10 kg/h Showroom machine, used only for testing purposes. Hfjdex Hz Uiopfx Aftsr

Condition: like new (used), ON 17.12.25, A FULL MACHINE AUDIT WILL BE CARRIED OUT BY THE MANUFACTURER’S SERVICE TEAM HOURS OPERATED: 80H (START-UP ONLY) NEW MACHINE PRICE: €7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of manufacture: 2021 • Last operation: 2022 Technical specifications • Working width: 1600 mm • Suitable material: Polypropylene (PP), MFI 230/2.16 > 400 g/10 min • Output: Up to 65 kg/h per meter of width • Product basis weight: 10–80 g/m² • Production speed: 5–80 m/min • Spinneret head: MB 1600, 50 h/inch • Extruder: RT-1101-1-100, L/D 30 • Heating power of rotating beam: 65–172 kW • Winding station: contact winder with automatic bobbin change • Max. winding diameter: 1250 mm • Web width: 1700 mm • Winding tension: 10–100 N/m Additional equipment and accessories • 3-component dosing system • Screen changer Ø80 mm • Ultrasonic cleaning system • Pyrolysis furnace • Ozone extraction • Cutting knife Hfjdpfxsx Hx Rne After • Central control panel with touchscreen and data storage

Year of construction: 1982, condition: ready for operation (used), A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement. Hfodpfxjx Hifvo Aftsr

Year of construction: 1997, condition: ready for operation (used), Offered is an Extruder AF 2 V Alimentazione Forzata with double degassing. Screw diameter: approx. 160mm, D ratio: approx. 37, DC drive, ABB rectifier DCS 500 visible, control: Siemens S5/S7, pelletizing: hot face/water ring, hydraulic unit: available, frequency inverter: Control Techniques / Emerson. Known defects: silo shortened/holes, vertical screw circuit missing, pelletizing shaft disassembled, screen changer frame warped. Inspection possible by appointment. Hfsdpfx Aex Hhxnjfter

Year of construction: 1999, condition: good (used), Brand: Hans Weber GmbH Model: ZE 20 Screw type: Single screw Year of manufacture: 1999 Screw diameter: 20 mm L/D ratio: 20 L/D Motor power: 3 kW Control voltage: 200 V Dimensions (LxWxH): 3100 x 1200 x 1280 mm Weight: approx. 300 kg Hjdpjx Ek Tljfx Aftefr Other: – Including swivel mounting arm – Including extra connection box

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 6900 mm Measurements depth 32400 mm Measurements height 4800 mm Hjdpfxsx D D Dls Aftsfr This ROLBATCH RBSDMS-IZS-678 was made in 2016. It is equipped with a Mill PLC control unit. The machine has a maximum film thickness of 0.3-1 mm. Application Types Extrusion

Year of construction: 2013, operating hours: 1,000 h, condition: ready for operation (used), Additional Equipment 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer 2x ground temperature sensor with sword probe This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Hsdpfxjx D Ewmj Aftefr Application Types Extrusion

Year of construction: 2006, condition: ready for operation (used), Additional Equipment Machine includes an SA 500 extractor built in 2006 and a 6m long cooling section. This KUHNE KS45-24D compounding extruder was manufactured in 2006. Ideal for processing a variety of materials, it offers robust construction and reliable performance. Consider the opportunity to buy this KUHNE KS45-24D compounding extruder. Contact us for more information. Application Types Hjdpfx Afsx D Hcqetjfr Extrusion

Year of construction: 2012, condition: ready for operation (used), This LEISTRITZ ZSE60MAXX-48D was manufactured in 2012. A co-rotating twin-screw extruder, it's designed for high-performance compounding of advanced polymer materials, including biodegradable polymers. Adaptable to various extrusion processes, it's ideal for bioplastics, masterbatch production, or specialty compounding. Contact us for more information about this machine. Application Types Extrusion Hfodpfx Aex D Dxpeftor

Year of construction: 2008, operating hours: 75,559 h, condition: ready for operation (used), Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Hedpfx Afex D Rgyotjfr Central main power supply This Krauss Maffei KME 75-36 R AC single screw extruder was manufactured in 2008. It features a KM-GM 750 control integration with meter weight and mass throughput control, and a capacity of up to 750 kg/h granulate. The machine includes a connection for INDEX wall thickness measurement and is equipped with a EURO socket CEE 32 A - 6 H / 250 V. Contact us for more information about this machine. Application Types Extrusion

Year of construction: 2016, condition: ready for operation (used), General Data Machine weight 1100 kg Measurements height 1960 mm Hfodpfxox D Edyo Aftsr Dimensions Machine Length 2120 mm Injection Unit Screw diameter 45 mm This Krauss Maffei KME 45 XS single screw extruder was manufactured in 2016. It features a screw diameter of 45 mm and a length of 1350 mm, with a drive power of 23 kW and a maximum speed of 2486 rpm. The machine includes five heating/cooling zones and can handle a maximum air flow of 5 × 630 m³/h. If you are looking to get high quality extrusion capabilities consider the Krauss Maffei KME 45 XS machine we have for sale. Contact us for more information. Application Types Extrusion

Condition: excellent (used), Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. Hfodpfx Afsx Dkmgjtjr If interested, please get in touch—further photos, datasheets, and videos are available.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27695 Manufacturer: Leistritz Type: ZSE 40 HP Year of manufacture: 2002 Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Hsdpfxsx Dip Tj Aftofr Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Year of construction: 2017, condition: excellent (used), Category: Twin-screw extruder Number: DE27686 Manufacturer: Berstorff Type: ZE 25 Year of manufacture: 2017 Capacity: 10 – 50 kg/h (depending on material) Screw diameter: 2 x Ø 25.1 mm L/D: 47:1 Motor: 14.5 kW Control: Siemens Hfjdpfx Afex A Evaotor Details: Co-rotating, segmented screws and barrels, degassing, vacuum pump, 1x side feeder The laboratory extruder is in excellent condition and can be inspected at any time at our premises in Haan/Düsseldorf. Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry – we have suitable options for almost every budget in our portfolio.

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Hfsdjx Apckepfx After

Condition: used, Year of construction: 2003, The Macchi 3-Layers is a high-capacity blown film co-extrusion line intended for production of general-purpose films with high width and output demands.It processes LLDPE, LDPE, mLLDPE, MDPE, HDPE, and in upgrade configuration also PP.The system uses a 700 mm 3-layer die head and reaches an output capacity of up to 900 kg/hour, depending on formulation. EXTRUSION GROUP: • Extruders: 80 mm + 100 mm + 80 mm • Infrared heating • Hydraulic screen changers Detailed upgrade specification: • One extruder Plastex 100/30D (middle layer B) Hfedpfx Afex Akywetor • Two extruders Plastex 80/30D (layers A and C) • Bimetallic barrels • Nitrided screws • Water-cooled grooved feeding sections • 5 heating zones with IR heaters and blowers • Motors: - 150 kW DC motor (100 mm extruder) - 100 kW DC motors (80 mm extruders) • AC motor application with digital control (IP55) for reduced energy consumption and harmonic distortion DIE HEAD: • Model TE505 • 700 mm die diameter, die gap 1.8 mm • 4+4 heating zones with ceramic heater bands (19 + 35 kW total) • Mounted on a die cart with integrated air distribution manifold • Insert range 600–800 mm • Equipped with IBC system COOLING SYSTEM: • Dual-lip carbon fibre Karat air ring (K-Design) • ASR4 Double Flux Cooling Ring, blower 15 kW • Jet-7 IBC cooling control system - 15 kW introduction blower - 18 kW extraction blower - Bubble diameter sensor - Air balancing valves - Variable-speed inverters TAKE-OFF UNIT: • Take-off width: 3200 mm • Oscillating nips • Optional tower-mounted secondary nip with load-cell control WINDING SECTION: • Double automatic back-to-back winder • Automatic roll change • Maximum winding width: 3150 mm FILM SPECIFICATIONS: Film width range with 700 mm die: 2000–3100 mm Thickness: 15–200 μm Output example: 3000 mm width, 100 μm LDPE → 800 kg/h ±10% LINE SPECIFICATIONS: Installed power: 550 kW, 415 V, 3-phase + neutral Screw speeds: 80/30D extruders: 0–130 RPM 100/30D extruder: 0–120 RPM Cooling water consumption: 6 L/min Compressed air requirement: 6 bar ADVANCED CONTROL & MEASURING SYSTEMS: • Doteco gravimetric dosing system Grado • Thickness profile systems (EC Plus modules): - S2 Automatic Die Control - S3 Rotating Capacitive Thickness Scanner - S4 Track Scanner - Q1 Serial communication (extruder/gravimetric values) - Q11 Printer module - Q12 Online modem diagnostics - Q7 Power consumption monitoring • K-Design VARIOcool automatic thickness control • Kundig reversing ring and thickness measurement AUXILIARY EQUIPMENT • Tower • E+L web guiding system • Corona treater AFS or 2800 station • Calibrating basket with optional supporting basket • Bubble guide GSRC 3200 (6 levels, motorized, IBC-linked) • Micro-perforation system (FBF cold needle) • Air shafts (8 pcs)

Condition: used, Cincinnati 5FL12 Hydraulic Shear with Elgo Electric P8511 Control Panel DRO, Rear Haul Off Conveyor, Powered Back Gauge, 5/8" Capacity Mild Steel (16m), Bed Width 3800mm. S/No. 33K27 Hedpfox Agibex Aftjfr Location: These lots are located in Dudley, West Midlands, UK. Unfortunately, there are no loading facilities, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, REIFENHÄUSER​ TWIN SCREWS EXTRUDER, for PP / PE / PET Direct Recycling Type: RZE 2-85-41: D, Corotating Unidirectional Machine No .: Year of construction 2007 With​ gear pump,​ dosing station​ with 5 components +​ working platform and​ 2 K-Tron, 2 screws feeder Application:​ for Recycling, Compound or Pinpe Production Screw speed: 280 U / p min 10 digital cylinder heaters with cooling Screws: segmental Screws Cylinder: Segment construction Heating power: 104 KW Drive Baumüller: 260 KW Throughput: approx. 900 kg / h Condition: very good Vacuum pump is not included​ Price EXW 35.000,00 Euro Best Regards P. Sachal Location: D-26345 Bockhorn / Grabstede Sachal Extrusionsmaschinen Tel. =WhatsApp P. Sachal Sachal Extrusionsmaschinen Hodpfxexzr H No Aftofr

Year of construction: 1989, condition: good (used), Extruder ZSK 58/32 D Year: 1989 Hodpfx Afsxzfdbotefr Stainless steel cooling tank Sheer dryer Sheer granulator

Condition: good (used), KMD 2-50KK Reduction Gearbox Flender Extruder Krauss Maffei Reduction gearbox for KMD 2-50KK. Used but functional. The part is original and shows signs of corrosion and contamination due to storage. Private sale, no guarantee or warranty. Hfodpfx Aexzd T Uofter We also have some spare parts for Krauss Maffei extruders in stock (e.g. control cabinets, hydraulic units, gearboxes KMD 2-90, etc.) – please enquire. €8,500

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Layers: 5 Web Width: 1,500 mm Film thickness range: 10–45 μm Output: - 15 μm: up to 745 kg/h - 17 μm: up to 845 kg/h - 23 μm: up to 905 kg/h Final film widths (per bobbin): - 3 x 500 mm - 6 x 250 mm - 3 x 400 mm - 2 x 750 mm Coextrusion Structure / Number of Layers: 5 layers Layer distribution: B / A / D / A / C Percentage: 10 / 35 / 10 / 35 / 10 % Raw materials: - LLDPE: 2.8–5.0 g/10min (190°C/2.16kg) - VLDPE: 2.8–5.0 g/10min (190°C/2.16kg) Extruder "A": 90/33 L/D, Maximum LLDPE output: 800 kg/h Extruder "B": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "C": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "D": 60/28 L/D, Maximum LLDPE output: 200 kg/h Flat die lip width: 2,050 mm Roll width: 2,100 mm Chill roll C1 diameter: 1,600 mm Maximum mechanical speed: 650 m/min MATERIAL FEEDING AND DOSING "A": - 1 main component material feed - 1 additional component material feed - 1 gravimetric batch dosing system (mounted directly on the extruder, 3 components) MATERIAL FEEDING AND DOSING "B, C, D": - 3 main component material feeds - 6 additional component material feeds - 3 gravimetric batch dosing systems (mounted directly on the extruder, 3 components each) Extruder "A": - SML Single-Screw Extruder SML-ES-90/33 - Tool unit: Manually operated screen changer SML-MF-man/90 Extruder "B, C, D": - 3 SML Single-Screw Extruders SML-ES-60/28 - 3 Tool units: Manually operated screen changers SML-MF-man/60 Cloeren 5-layer/3-up Stretch Film System consisting of: - 1 five-layer feedblock FG - 1 automatic flat die, 2,050 mm (for automatic die control) - 1 die splitting system for flat die body separation and cleaning - 1 vacuum box, 2,050 mm - 1 triple-chamber vacuum box SML-TC/2050mm Cooling and take-off unit: - 1 casting section SML-CS/2100/650 Hfedjxyuffspfx Aftsr - 1 electrostatic edge pinning device - 1 thickness measuring unit (X-ray sensor for automatic dies, stretch wrap film) - 1 recovery system for feeding stretch wrap film with vertical scraptruder for SML 90 mm single-screw extruder - 1 antistatic pipe - 1 power supply unit for antistatic pipes Winding unit: - 1 Cast Film Turret Winder Series W4000 for stretch wrap films - Max. end film width: 3 x 500 mm - Number of turrets: 1 - Number of winding shafts: 4 - Winding shaft diameter: 3" - Max. mechanical winding diameter (3" bobbins): 400 mm - Min. winding diameter: 82 mm - Winding tension: 15–100 N/m - Contact pressure: 50–500 N - Cycle time (3" core magazine): 20–25 s - High-speed Cast Film Turret Winder for stretch wrap film—compatible with 3" air shafts, contact winding mode - 1 automatic core and roll handling system W4000 4S1T (per turret) - 1 oscillating frame SML-OF/2100 Control and data logging: - 1 SML Automatic Control System SML-CS-2/SMILE/4 extruder - 1 SML Data Logging System: SMILE Process Analyzer - 1 E-container (20 ft) Chiller: Frigosystem Compressor unit: MSD V 30-37

Year of construction: 2010, operating hours: 29,000 h, condition: excellent (used), Category: Twin-screw extruder Number: DE27699 Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 50 MCC+ Year: 2010 Screw diameter: 2 x Ø 50.0 mm Hedpfx Aoxykcgoftefr L/D: 48:1 Motor: 129 kW Details: Co-rotating, segmented screws and barrel, vacuum pump, temperature control unit, 2x side feeders, 1x side degassing The extruder is in very good condition and has only 29,000 operating hours. Options: 7-fold dosing system from Motan Colortronic, dryer (Motan LA 1200/4), IPS strand extraction, strand conveyor belt, water bath, granulator, vibrating screen. All options are available immediately at extra charge. This offer does not meet your requirements? Please visit our website Plama or send us your detailed enquiry. We offer suitable equipment for almost every budget.

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 25 mm, TECHNICAL DETAILS Screw diameter: 2 x 25.0 mm L/D: 40:1 MACHINE DETAILS Total power: 12.0 kW Hfjdpoxx Uk Eefx Aftsr EQUIPMENT Platform 4-way dosing system from Brabender Scholz dosing control Easytouch (year of manufacture 2009) 1x side feeder Degassing Strand die Water bath by Collin Scheer granulator SGS 50-ET

Condition: good (used), Year of construction: 1999, operating hours: 17,620 h, Brand: Collin Lab & Pilot Solutions GmbH Extruder model: E 30 M Low Boy Screw type: Single screw Screw Ø: 30 mm L/D ratio: 25 mm Operating hours: 17,620 h Hjdsxx Tnpspfx Aftefr Year of manufacture: 1999

Condition: excellent (used), We are offering an unused single-screw extruder from stock. The unit was operated exclusively for test purposes and is therefore in excellent, near-new condition. Ideal for laboratory, material development, small batch production, or custom extrusion applications. — Hsdpoxxim Iefx Aftofr Technical Data & Features • Screw diameter: 30 mm • L/D ratio: 25:1 • Condition: unused / test runs only • Drive: 3 kW SEW motor with gearbox • Heating zones: 4 zones with temperature controllers • Control cabinet: included in scope of delivery • Currently not connected, but can be integrated without issue • Die: Strand die can be customized or newly manufactured upon request • Design: robust laboratory/pilot plant construction • Mobile: base plate with heavy-duty castors – easy to position — Special Features • Very compact design • Ideal for filament, profiles, laboratory tests and material trials • Barrel and screw in excellent condition (see photos) • Immediately available from stock