SwedAbo

Condition: used, Roller Conveyor Used roller conveyor with adjustable legs. Suitable for infeed and outfeed of boards, beams and sawn timber at saws, planers and other woodworking machines. Specifications: Length: 6 m Width: 90 cm Legs: adjustable, height 45–65 cm Dsdpo Ah Rnpefx Ak Aokw Rollers: free-running, housed bearings Frame: powder-coated steel

Condition: used, HUMA Matarbord 9M – Feeder Table / Receiving Hopper with Chain Slat Floor, 2008 Dsdpj Ah Rgwefx Ak Ajkw Used feeder table (receiving hopper) made by the Swedish manufacturer HUMA (Hulthens Maskinfabrik AB), with a moving chain-and-slat floor. It suits receiving bulk material (wood chips, bark, sawdust, firewood) and feeding it evenly onto a conveyor, chipper or boiler system. Specifications: Manufacturer: HUMA – Hulthens Maskinfabrik AB (Sweden) Model: Matarbord 9 M Year of manufacture: 2008 Serial no.: 2008.51.3047 Hopper dimensions: length 9 m, width 2 m, height 1.2 m Volume: approx. 21 m³ Voltage: 400 V Weight: 1800 kg Drive: electric motor with chain transmission CE marked

Condition: new, We are offering for sale a brand new, unused HOMAG reversing conveyor, as shown in the drawing. It has been in storage since its arrival and is still wrapped. Dkjdpfxj Ahx Dpo Ak Aew

Year of construction: 2003, condition: good (used), Conveyor system (outlet) behind e.g. Weinig planing machine Dksdpfx Ae Ahigfek Aew Max. wood length 3200 mm, with cross transport With return belt 6000 mm

Condition: used, Roller Conveyors – 5 pcs (Höövik) Dodpfx As Agr H Ask Aokw 5 modular gravity roller conveyors (roller tracks) made by Höövik. Mount them in racking or shelving systems at a slight incline, and cartons or crates roll forward by gravity. A practical solution for warehouses, picking areas and production lines. Quantity: 5 pcs Length: ~2750 mm Width: 1200 mm Height: 120 mm (per section), 830 mm (all 5 sections stacked) Total weight: 230 kg (all 5 sections) Galvanized steel frame, yellow plastic roller tracks Condition: in working order

Year of construction: 2007, condition: used, Forklift Manufacturer: Jungheinrich Model: EFG 540 Year of manufacture: 2007 Technical specifications - Overhauled by Jungheinrich in 2017 - Total weight: 6600 kg - Overall length: 2830 mm - Overall height: 1350 mm - Ground clearance: 110 mm - Lifting height: 4,450 mm - Load center: 500 mm - Free lift: 2,250 mm - Mast height: 2,215 mm - Tire condition: 90 % - Battery capacity: 840 Ah - Battery voltage: 80 V - Remaining battery capacity: 70 % Djdo Afxmuopfx Ak Ajkw - Battery weight: 2,076 kg - Fork length: 2000 mm and 1200 mm - Fork carrier width: 1270 mm - Fork thickness: 50 mm - Fork width: 125 mm - Power: 18 kW - Duplex mast - Turning radius (inside): 2450 mm - Load capacity: 4000 kg - Rated load at 500 mm load center: 4,000 kg - Rated load at 600 mm load center: 3,640 kg - Rated load at 700 mm load center: 3,330 kg - Total operating hours: 8,157 h - Operating hours since overhaul: 268 h Note: The technical data and descriptions are copies of the original order confirmation. This information is provided for informational purposes only and is not binding.

Condition: used, Belt Conveyor KJ Maskinfabriken KA69B-550B Belt conveyor with a stainless steel frame, made in Denmark (KJ Maskinfabriken A/S, Esbjerg). Side guides on both sides. Technical data: Manufacturer: KJ Maskinfabriken A/S (Denmark) Type: KA69B-550B Year: 1983 Length: ~4.3 m Frame: stainless steel Dkjdpfo Afwwvox Ak Asw Drive: Interroll drum motor Emergency stop switch: Schneider Electric Connection: 400 V plug

Condition: used, Belt conveyor with a modular plastic belt and a stainless steel frame. High side guides on both sides keep material on the belt. Technical data: Length: ~5.5 m Frame: stainless steel Belt: modular plastic belt Dode Afu Uzjpfx Ak Aekw Drive: Bauer gear motor (Germany), 0.5 HP, 220/380 V, 50 Hz

Condition: used, Kadikis AV Belt Conveyors The conveyors are suitable for material handling, packaging, woodworking and other production lines. Technical specifications: Quantity: 2 pcs Conveyor length: 2000 mm Belt width: 150 mm Drive motor power: 0.75 kW Frequency inverter: Yaskawa V1000 Power supply: 230 V, single-phase Protection: C10 circuit breaker Controls: on/off switch, emergency stop button, speed adjustment with a potentiometer Dsdpfx Akj Ad Ir Ds Aokw Construction: heavy-duty steel frame with adjustable feet Condition: lightly used, in working order Advantages: Adjustable belt speed Runs on a standard 230 V supply Compact, with a small footprint Robust and reliable construction

Condition: used, MAKOR ACR 2 Automatic Trolley Destacker – Fully Restored We offer a fully restored MAKOR ACR 2 automatic trolley destacker, made in Italy. It unloads profiles, mouldings and other long wooden parts from transport and drying trolleys. The parts move one by one onto a roller conveyor and on to a coating, drying or finishing line. The machine has been fully restored and tested, and it is ready for immediate production use. Technical specifications: Manufacturer: MAKOR (Italy) Model: ACR 2 Serial number: 5316 Year of manufacture: 1995 Dedpj Ad Ii Nefx Ak Aekw Machine type: automatic trolley destacker Machine length: 3000 mm Distance between lifting arms: 1400 mm Power supply: 400 V, 3-phase Noise level: 75 dB(A) Construction: heavy-duty steel frame Condition: fully restored, in working order Advantages: Trolleys are unloaded automatically, with no manual lifting Suitable for profiles, mouldings and other long wooden parts Ideal for coating, drying and finishing lines Control panel with automatic and manual modes Robust industrial construction that is easy to maintain Restored, tested and ready to work

Condition: used, MAKOR ACA 2 Automatic Trolley Stacker – Fully Restored We offer a fully restored MAKOR ACA 2 automatic trolley stacker, made in Italy. It automatically stacks profiles, mouldings and other long wooden parts coming out of a coating, drying or finishing line onto transport and drying trolleys. The machine has been fully restored and tested, and it is ready for immediate production use. Technical specifications: Manufacturer: MAKOR (Italy) Model: ACA 2 Serial number: 4338 Year of manufacture: 1992 Machine type: automatic trolley stacker Machine length: 3000 mm Distance between stacking arms: 1400 mm Power supply: 400 V, 3-phase Construction: heavy-duty steel frame Condition: fully restored, in working order Advantages: Trolleys are loaded automatically, with no manual stacking Dksdpfxe Ad Hv Uj Ak Asw Suitable for profiles, mouldings and other long wooden parts Ideal for coating, drying and finishing lines Control panel with automatic and manual modes Robust industrial construction that is easy to maintain Restored, tested and ready to work

Condition: used, Plate lifting manipulator Dkjdpfx As Adqmwek Ajw Lifting capacity: 250 kg Base height: 350 cm Arm length: 558 cm 4 suction cups Used, in good condition.

Year of construction: 2008, condition: used, Technical specifications: - Manufacturer: Venjakob - Type: H - Working width: 1,300 mm - Overall width: 1,510 mm - Length: 9,250 mm - Feed speed adjustable via frequency converter - Frequency converter not included in the scope of supply - Height: 900 + / - 50 mm - Motor power: 1.5 kW - Motor: ATEX compliant - Belt control, pneumatic - Max. load: 70 kg/m - Color: RAL 7035 light gray Dodpfxo Aba Uxo Ak Aekw - Voltage fluctuations: +/- 5% - Location: in the warehouse

Condition: excellent (used), Year of construction: 1997, operating hours: 123 h, functionality: fully functional, Application: Fuel supply for wood chip biomass boilers 1. System description The Mawera SST, a two-beam, hydraulically operated discharge system, is used for the uniform and continuous discharge of wood chips from a rectangular storage silo. The sliders or scrapers move the material in alternating strokes to feed the boiler. 2. Main dimensions Silo length: • Version with 12 sliders: 15.00 m Internal silo width: 4.24 m Scraper blade width: 900 mm Scraper blade depth: 250 mm Scraper blade height: 70 mm 3. Drive and operation Hydraulic drive with two cylinders Thrust force: 160 kN Tensile force: 80 kN Automatic, alternating stroke control synchronized with the boiler control 4. Connections Material discharge into a central collection pit Further transport via screw or chain conveyors Boiler connection: DN 315 5. Installation requirements Concrete floor, MONO-FINISH quality, tolerance ±5 mm Base plates, openings, and covers to be provided by the customer Maintenance access to the hydraulic unit must be ensured 6. Advantages Reliable operation with varying wood chip quality Consistent fuel supply for 24/7 boiler operation Dsdpfx As Aba T Uek Ajkw Low maintenance requirements Already disassembled, will be loaded onto a truck. The support beams can be disassembled into 6.3 m segments. The width during transport is not 4.24 m, as the beams can be removed side by side. The scrapers are removable. Transport is possible with a standard truck. Already disassembled.

Condition: used, machine/vehicle number: 005981, Max. panel width: 1200 mm Max. panel length: 2500 mm Dedj Aax Iuopfx Ak Aekw 90 degree transfer system: yes

Condition: used, machine/vehicle number: 008493, Introduction system: with grippers Djdpfx Aksz S T Uue Ajkw

Condition: good (used), Year of construction: 2003, Dry rack loading system for profiles Manufacturer: Makor Type: ACA Year of manufacture: 2003 Automatic rack loader at the end of the line for loading dry racks with painted profiles and strips Typical applications: Profile painting, strip production, coating lines for baseboards, decorative strips, and window strips Dksdpfx Aksz Nky Ne Aew Design: 4 positioning arms for short and long profiles up to approx. 5000 mm (arm spacing approx. 0 - 1600 - 2120 - 2550 mm) Paternoster rack width approx. 175 mm Basic concept: - Automatic transfer of the coated profiles from the end of the line to the dry racks - 4 positioning arms for different profile lengths - Can be used as the final stage of a profile coating line / board coating machine / strip spraying machine

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 2230832-269, Barbaric RTS 02 Professional reverse transfer system with destacking, year of manufacture 2023. Workpiece recirculation with 0 - 90 - 180 degree rotation, part measurement, destacking function including stack construction and manual mode for oversized panels. Composed of a removal station RX U4 B2200, conveyor belt L9000 B800, delivery station Comfort, movable table, dual function, steplessly adjustable conveyor belt, support rollers with double track, portal RTS 6100, safety fences and 2 safety light curtains. Largest part 2800 x 1300 mm, smallest 300 x 80 mm, maximum 60 kg. Pick-up with suction cups, up to 12 cycles per minute, transfer speed up to 120 m/min, stacking height 800 mm. Connection 400 V / 50 Hz, 20 A and compressed air 0.6 MPa. Dodpfxsz Ngg Ee Ak Askw

Year of construction: 1986, condition: used, functionality: fully functional, For sale is a complete silo discharge and conveying screw system from a wood processing production facility. The system was in regular operation until production ceased approximately 6 months ago and was subsequently decommissioned. The complete package includes the mechanical silo discharge system, several conveying screws or transport lines, various gear and electric motors, the complete associated electrical control system in the control cabinet, and an additional new or unused spare motor. The system was used to discharge and further convey wood chips or similar bulk materials from the silo towards the heating system. Scope of supply: The offered complete package includes, among other things: - complete mechanical silo discharge system - several conveying screws / tubular screws - existing transport and conveying lines - several gear motors and electric motors - Bonfiglioli gearboxes - SEW-EURODRIVE drive technology Dodpfxsz Iuiks Ak Aekw - NORD gearbox technology - ASEA, ICME and Dietz electric motors - various connection, transition and discharge components - complete control cabinet with control and switching components The complete existing control cabinet is part of the offer. This offer does not just include individual conveying equipment, but a comprehensive, cohesive system and spare parts package including the existing control system. Drive technology Various industrial motor and gearbox components from well-known manufacturers are installed. Among others: Bonfiglioli Riduttori Gearbox type MVF 130/2R, 4.00 HP, gear ratio i = 1/35. ASEA Three-phase motor, 0.55 kW, 930 min⁻¹, 380–420 V, protection class IP54. SEW-EURODRIVE Industrial gear motor, 0.55 kW, approx. 1,400/33 min⁻¹. NORD Industrial gearbox, type SK 30F-EC80, gear ratio i = 157.20. ICME Ravenna Three-phase motor, 0.55 kW, approx. 920 min⁻¹, protection class IP55. Dietz-motoren Three-phase motor, 0.4 kW, 2,760 min⁻¹, 220/380 V. Further technical specifications and photos of the existing nameplates can be provided upon request. Condition: The used components are in a condition appropriate for their age and use. Signs of wear, dust deposits and some surface corrosion are present. The system is suitable for both possible further use or adaptation to an existing silo system, as well as a comprehensive spare parts and components package for silo, heating and conveying technology. In particular, the various gear motors, gearboxes, screw components, the complete electrical control system and the additional new spare motor make the complete package interesting for operators of existing older systems. Inspection / Dismantling The system is still located at the original production site and can be inspected by arrangement. Location: 3608 Thun, Switzerland Availability: immediately Dismantling can be carried out immediately - must be completed by 31.07.2027. Dismantling, removal, loading and transport will be carried out entirely by the buyer at his expense and responsibility. Sale of the complete system in its existing condition, as inspected. Subject to prior sale. Sale excluding warranty and guarantee. Selling price: 3,900.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2005, feed rate X-axis: 60 m/min, plate length: 2,500 mm, plate width: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum plate width: 1,200 mm Dkjdpfxoz Ekfcs Ak Ajw Maximum plate length: 2,500 mm Minimum plate width: 220 mm Minimum plate length: 250 mm Maximum feed rate: 60 m/min EQUIPMENT 90° transfer conveyor CE safety compliance The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 5981

Year of construction: 2005, condition: used, Belt conveyor Finnrose Technical data: - Manufacturer: Finnrose - Type: FB 2.0 - Length: 2,000 mm - Year of manufacture: 2005 - Belt width: approx. 1300 mm - Overall width: approx. 1460 mm - Speed: approx. 3 - 10 m/min continuously adjustable via a handwheel on the adjustment gearbox, 2.4 - 18 m/min. - Conveyor belt suitable for maximum ambient temperatures of up to 70 degrees Celsius - Height: 900 + - 50 mm - Motor power: 0.75 - 1.5 kW Ex Dodsz Ei Ddjpfx Ak Askw - Location: Warehouse D-32825 Blomberg

Condition: used, Year of construction: 2025, functionality: fully functional, Double scissor lift table – Kraus brand Dksdpfsz Dkfmex Ak Aew Length: 2500 mm Width: 2400 mm Maximum lifting height: 3500 mm Maximum lifting capacity: 1000 kg Year of manufacture: 2025

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, total width: 2,200 mm, total length: 3,200 mm, total height: 2,610 mm, Automatic racking car unloading machine Manufacturer: Makor Type: ACR 2 CE marking The machine comes from a finishing plant (painting) for flooring and furniture profiles. Djdpfx Akjz A T Eyj Askw Automatic unloading device for racking cars / transfer from drying car to machine lines for further processing. The machine facilitates the transfer on automatic lines of profile wood and strip stock stored in drying cars/racking cars. 2 transfer arms Part lengths: approx. 1700 - 3000 mm (or even longer, depending on the part thickness) Part widths: max. approx. 170 mm Working height: 850 mm Capacity: approx. 25 parts/min. Connection value: approx. 3 kW Installation dimensions: approx. 3200 x 2200 x 2610 mm Weight: approx. 1000 kg Transport dimensions: approx. 3100 x 1220 x 2500 mm

Condition: used, Scraper coveyor Dodpfsz Ap H Aex Ak Askw Lenght: 15,8 m Width: 45 cm Electric motor included

Condition: used, Generator infeed table before resaw Dedpfx Ajz Ap Efek Aokw