Jürgen Conrad

Year of construction: 2008, condition: not inspected (used), Dosing machine, manufacturer: Krumbein, model: DSM E/IV x-y, year of manufacture: 2008 Nodpfx Aeyniy Ieg Ioku

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, total length: 1,685 mm, total width: 1,550 mm, total height: 2,260 mm, product height (max.): 310 mm, product width (max.): 150 mm, machine/vehicle number: 100281518, No reserve price – guaranteed sale to the highest bidder! The original price was over 100,000 EUR! The device is ready for loading & packed for transport! Loading can be handled by the seller. TECHNICAL DETAILS Maximum inspection width: 150 mm Maximum inspection height: 310 mm CONVEYOR SYSTEM Conveyor type: Turn table Speed: 12 – 45 m/min MACHINE DETAILS X-ray Generator Voltage: 30 – 75 kV Current: 1 – 8 mA Power: max. 300 W Dimensions (L x W x H): 1,685 x 1,550 x 2,260 mm Protection class: IP65 / IP66 Electrical data Power supply: 200 – 240 V Frequency: 50 / 60 Hz EQUIPMENT Rotary table conveyor Hermetic air cooling X-ray inspection system Njdpfxsympcms Ag Ioku

Year of construction: 2022, condition: ready for operation (used), An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible. Nksdoyln D Tspfx Ag Ieu

Year of construction: 2019, condition: used, Year: 2019 Speed: 12,000 bph (bottles per hour) Steam tunnel Bottle rejection system Safety protections Code: EA 643 -Minimum container diameter: 50 mm Nedpeyk En Tjfx Ag Isku -Maximum container diameter: 115 mm -Minimum container height: 100 mm -Maximum container height: 340 mm -Minimum sleeve diameter: 25 mm -Maximum sleeve diameter: 130 mm -Minimum sleeve length: 40 mm -Maximum sleeve length: 320 mm

Condition: good (used), 5 units in good condition Njdpfoykk Edox Ag Ioku Were installed on a CIP device

Condition: excellent (used), device for collection at owner's location: Nksdpfsyhzxgox Ag Iju Green Factory Zdunowo 48 09-142 Załuski

Year of construction: 2010, condition: good (used), functionality: fully functional, machine/vehicle number: 100560/11, device in good condition; collection from the owner: Green Factory, Zdunowo 48, 09-142 Załuski, Poland Nksdpfxsyhzw Ns Ag Ieu

Year of construction: 2023, operating hours: 816 h, condition: excellent (used), functionality: fully functional, device is in working condition Nedpfeyhzwisx Ag Ieku possibility to purchase and collect directly from the owner: Green Factory Zdunowo 48, 09-142 Załuski / Poland

Condition: used, Used Heat and Control NC-3006 Oil Roaster continuous nut fryer with capacity 600 kg/hour, made in 2011, installed 2013 and last used in 2014. Major equipment includes fryer (max temperature 200 degrees Celsius with positioning conveyor, main conveyor, sediment conveyor), oil storage tank, plate heat exchanger, oil filter, mixing tank, control system. Nkodpfoyhc Rajx Ag Ieu 'The Oil Roaster continuous nut fryer is specially designed for low oil volume, precise temperature control and clean operation for every type of nut process: Peanuts, Almonds, Sunflower meats, cashews, honey-roasted, and more.'

Condition: used, Little used ethanol / alcohol dehydration plant manufactured in Spain in 2015 with capacity 90,000 litres/day of minimum concentration 99.8 ºGL alcohol suitable for use as biofuel. Raw material should be distilled alcohol with a minimum concentration of 95.5 ºGL. Nksdpfx Agoyhc Ixe Ieu Major equipment includes: - (2) Molecular sieves; (2) vertical shell & tube heat exchangers; (4) horizontal shell and tube heat exchangers; alcohol evaporator; (2) plate heat exchangers; column; (2) process tanks; pumps and motors; instrumentation, controls and valves; steam boiler. Process description available on request.

Condition: used, Used Heat & Control pellet frying and seasoning line made in 1992 with capacity of approximately 450 kg/hour. Used for corn chips, pellets, snacks. Main equipment includes: - Hopper and feed conveyor - Heat and Control fryer with deoiling belt - Flavour drum Njdjyhc H Ujpfx Ag Isku - Gas powered oil heater and oil pump. More information to follow.

Year of construction: 2010, condition: good (used), functionality: fully functional, 1 x Nimo KG / Unitech barrel tipper with chute. Model - SKV 300 C2. Serial no - 11117. Date of manufacture - 2010. Tipping height - 1600mm high. Maximum load - 250 kg. Electrical requirements - 380-400 V / 50 hz / 3 phase. Nkedpfx Ajyg R N Ieg Isu Power - 2.7 A. Overall dimensions - 1000mm long x 730mm wide x 2200mm high (2500mm when tipping).

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Loma IQ2 metal detector. Nkodsygqx Aspfx Ag Isu Perfetcly Working, ready to use. Located Locally in Hungary (EU).

Year of construction: 2001, condition: used, functionality: fully functional, Safeline metal detector. Perfectly working, ready to use. Njdpfxjygqwfe Ag Ioku

Year of construction: 2017, condition: used, Manufacturer: Contifrac sprl Model: CDS-161205 Year: 2017 Type: Deodorizer Condition: new, never used. Document : CDS-P& Installation consisting of: - A horizontal cylindrical deodorizer with a shallow bed divided into two horizontal compartments, supported by two supports and offering the possibility of treating either 250 kg in one compartment or 500 kg in two compartments. - A horizontal buffer tank equipped with a product inlet/outlet, a vacuum outlet, and a sight glass. Volume: +/- 460 liters. - 2 tubular heat exchangers - 1 electric heater - 2 electric heating elements - Other equipment: control and metering valves, flow meter, steam drying ramp, etc. - Electrical cabinet Materials: all parts in contact with the product are made of 304L and 316L stainless steel. Insulation: 100 mm rock wool. Documentation and diagram available. Capacity: deodorization temperature 180°C (200°C max.) Batch: 250 kg or 500 kg (2 x 250) Nksdpfxjyga U Tj Ag Iju Process: heating the product under vacuum + steam injection.

Condition: like new (used), Its function is to place metal and glass containers into baskets for sterilisation. The containers arrive from the packaging or filling process and are stored in the machine’s accumulation chamber. The machine positions them inside the sterilisation cage layer by layer using plastic dividers. These dividers are fed and positioned manually. The sterilisation cages have a movable base to allow containers to be placed inside and for the height to be lowered, forming successive layers until the cage is full. INCLUDES: - Scissor lift with hydraulic pump. - Storage compartment with a useful width of 1,000 mm. - The dimensions of the cages are: Nkodpfx Ageyf Awuj Iju - Overall dimensions: 1 m x 0.83 m x 1.08 m (length x width x height) - Usable dimensions: 0.81 m x 0.765 m x 0.75 m (length x width x height)

Year of construction: 2019, condition: ready for operation (used), A Pulsotronic metal detector for liquid and pasty products in pipeline systems is available. Pipe diameter: 100mm, max. operating pressure: 10bar, max. operating temperature: 80°C, version: EX. Machine dimensions X/Y/Z: 1250mm/550mm/700mm, weight: approx. 50kg. On site inspection is possible. Nkjdjyfv Nwspfx Ag Ieu

Condition: good (used), Stainless Steel 90 degree conveyor belt Material: Compeltely stainless steel Belt Width: 400 mm Nodeyfd Uhspfx Ag Ioku Machine Dimensions LxWxH: 2.050x900x800 mm (height adjustable) Machine Weight: 250 kg.

Year of construction: 2012, condition: good (used), Derichs Stainless Steel screw conveyor Nodpfxjyc Tt Uo Ag Isku Screw conveyors are used to meter or convey product horizontally up to approximately 7 m or vertically up to 3 m. Depending on the application, either enclosed tubular screw conveyors or trough screw conveyors are used. The advantage of trough screw conveyors is that the trough lids can be opened for cleaning. The bulk material is given into the conveyor through the inlet. There it is conveyed by the screw spirals to the outlet. In the case of dosing and weighing processes, the drive is generally controlled by a frequency converter in order to achieve a coarse and finest flow, which allows a weight-accurate dosing. In order to prevent product trickling at the outlet an optional pneumatically operated outlet flap can be installed. Manufacturer: Derichs Model: FMS-T-400 Year: 2012 Screw Diameter: 400 mm Screw Length: 4.660 mm Power: 5,5 kW / 50Hz Capacity: 80 m3/h Motor Speed: 43U/min Machine Dimensions LxWxH: 5.800x700x530

Condition: excellent (used), Mayonnaise production line. The machine is ready for operation. Nkodpsyc E Nzjfx Ag Isu

Condition: excellent (used), functionality: fully functional, Dispenser/Dosing Unit made of stainless steel Overall dimensions: 1600 x 600 x 1900 mm Included equipment: 4 pneumatic dosing heads Height-adjustable base The dosing unit is designed for precise dispensing of products in production processes. Equipped with four pneumatic dosing heads, it enables simultaneous portioning of several product streams, significantly increasing the efficiency and repeatability of dosing operations in processing lines. The device is mounted on a height-adjustable base, facilitating adaptation to various types of workplaces and integration with other machines in packaging or filling processes. The pneumatic dispensers operate using air pressure, allowing for precise and hygienic dosing of products with different consistencies, commonly used in the food, cosmetic, or chemical industries. Nsdeycl Iwjpfx Ag Ioku

Condition: used, Velcorin dosing system for cold sterilization. Manufactured by DMT Service, reliable dosing to ensure microbiological safety in beverages. Ideal for integration into existing filling lines. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: Cold disinfection Nsdpfxjx T Az Dj Ag Isku

Year of construction: 2017, condition: ready for operation (used), A complete system for the comminution of frozen cheese blocks is available. 1) Lifting device Karl Schnell 605, use: lifting of transport trolleys, max. trolley volume: 300l, lifting height: 2380mm, lifting force: 3500N, lifting speed: 4.5m/min, machine dimensions X/Y/Z: approx. 3800mm/600mm/800mm, weight: approx. 600kg. 2) Frozen block shredder Karl Schnell 487, inlet height: 2485mm, outlet height: 737mm, opening width: 680mm, tooth width: 44mm, speed: 65rpm, motor power: 30kW, machine dimensions X/Y/Z: approx. 1800mm/1400mm/2700mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible. Njdpfsx S Rb Nsx Ag Isku

Condition: like new (used), THE FUNCTION OF THE PASTEURIZER-COOLER IS TO PASTEURIZE THE PRODUCT DURING THE INITIAL PHASE OF THE PROCESS, AND THEN TO GRADUALLY COOL IT THROUGHOUT THE REMAINDER OF THE PROCESS. THE MACHINE INCLUDES: - 3 BASINS AND 3 CENTRIFUGAL PUMPS: Useful dimensions: - Basin 1: 2.44 m x 1.35 m x 0.53 m - Basin 2: 2.32 m x 1.35 m x 0.53 m - Basin 3: 2.32 m x 1.35 m x 0.53 m - Modular belt infeed conveyor: 5.20 m (length) - Modular belt outfeed conveyor: 4.35 m (length). Nodpfxex S Hpcj Ag Ieku

Condition: like new (used), Designed to snip green beans. Throughput is subject to the variety and dimensions of the product. Nksdsx S Ezdjpfx Ag Iju Loading height: 1.60 m Unloading height: 1.35 m Drum width: 80 cm Drum length: 2.20 m Exit diameter: 57 cm