Bonhof

Condition: excellent (used), Year of construction: 2019, operating hours: 6,009 h, Year 2019. Actual hours: 6009 h Dcodpfxeygkygs Afnsc Single owner Tractor fully serviced with 6 months or 500 hours warranty on engine and transmission.

Condition: like new (used), Year of construction: 2021, operating hours: 7,226 h, Year 2021. 7,226 actual operating hours. RTK technology. Single owner, fully inspected, with 6-month warranty on engine and transmission or 500 operating hours. Dcedeygku Djpfx Afnjc

Condition: used, Year of construction: 2016, Compressed air | Krone Comprima 150 CV XC Year of manufacture: 2016 Approx. 27,500 bales pressed All chains replaced in 2023 Wrapping table Djdpjx R N R Hofx Afnjcc Control unit Complete knife set Roller hold-down Air brake | Internal No.: 11349362

Condition: used, Year of construction: 2025, operating hours: 86 h, Compressed air | Knives: 25 | Pickup-hydraulic | Pickup support wheel | Roller hold-down | Claas Rollant 630 Uniwrap Year of manufacture: 2025, currently 422 bales pressed (as of 26.06.2025) Dcjdpfx Aswvwtaofnjc Technical specifications: - Baler-wrapper combination with 1.25 m chamber diameter - Chamber width 1.20 m MULTIFLOW pickup: - Pickup width 2.10 m - Gauge wheels, pendulum mounted, with 16x6.5-8 tyres - Dual feed augers PRO cutting floor: - Hydraulic suspension and lowering cutting floor to prevent blockages - Operation via terminal including optical and acoustic signals ROTO CUT cutting rotor: - Cutting rotor with four spirally arranged tine rows - Individually protected knives against foreign objects - Hydraulic knife group selection Chamber: - 16 profiled steel rollers - Rear door with hydraulic locking - Greasable baler roller bearings Wrapping unit: - Fully automatic control - Twin wrapping arms with 750 mm film pre-stretchers - Wrapping speed max. 36 rpm for 6 layers of film in 23 seconds - Terminal for direct access at the wrapping table - Hydraulically lowerable film magazines for 12 spare rolls - PROFI CAM camera and work light for wrapper illumination - Continuous chain lubrication - Hand wash tank incl. soap dispenser - Hydraulic requirements: load-sensing and 1 x single-acting Equipment: MULTIFLOW Pickup HD with twin roller hold-down Dummy knives, set of 25 ROTO CUT cutting rotor with hydraulic swinging PRO cutting floor, 25 knives PREMIUM LINE knife set, 25 pieces Film pre-stretch 82% Bale transfer guide ROLLATEX net tying Single wide-angle PTO shaft with cam-type clutch, 6-piece Tractor hydraulic connection, comfort Adjustable support stand Hydraulic/electronic ROTO CUT swinging floor K80 ball head hitch, MR Tyres: 600/55 R26.5 Dual-line compressed-air brake system, up to 40/50 km/h LED high-end work lights including service lighting Screen for PROFI CAM CEMIS 700 Automatic central lubrication system, electrically actuated Extended tool set | Internal no.: 11264178

Condition: used, Year of construction: 2021, operating hours: 8,170 h, Equipment: crop cutter, PickUp-hydr. | Roller press | Claas Rollant 520 RC Year of manufacture 2021 8200 pressed bales Dsdpfxev Aqthe Afnocc Equipment: Pickup with roller press, pickup width 2.10 m Follower wheels for pickup, oscillating (pivot point Ø 30 mm) ROTO REVERSE ROTO CUT cutting rotor Set of knives Bale ejector, straight Single wide-angle universal joint shaft with cam clutch, 6-part Tires 19.0/45-17 Input gear 540 rpm OPERATOR, operating terminal with display | Internal no.: 11031991

Condition: used, Year of construction: 2007, PTO shaft guard missing Tires 500/50-17 Tandem axle self-steering / Machine is ready for use! / Dcedpfx Afouiw Uaenoc

Condition: used, Year of construction: 2002, Operating terminal / Dodeufxr Espfx Afnscc

Condition: used, Year of construction: 2023,

Condition: used, Year of construction: 2021, IsoBus Load-Sensing additional control unit knife group circuit / Dcjdpet N T Ausfx Afnec

Condition: used, Year of construction: 2022,

Condition: used, Year of construction: 2023, Cutting rotor Tandem axle Air brake / Tires 620/50R-22.5 Tires 600/50-22.5 / Bale chute Varioterminal 9 inch PTO shaft 1 / 3/4 inch (44mm) 20-t twine monitoring / Dcjdpfx Ajt Hr Epefnsc

Condition: used, Year of construction: 2023, Operating instructions Manual support leg Wide-angle PTO shaft type 3, / pick-up guide plate with roller hold-down device Height-adjustable drawbar Removable / feeler wheels Tires 620/40x 22.5 Baler with cutting unit Tandem axle Cutting unit / bale chute Dcjdpfx Afjt Ebdfsnsc

Condition: used, Year of construction: 2023, 540 rpmGearbox Net binding Additional net roll holder Extendable / bale ejector Wheel chocks Press roller bearings (relubricated) Fixed drawbar eye 40mm / control unit E-LinkPro ISObus PickUp2.25 m Var. roller downholder / PickUpTast wheels fixed 17 Dcsdpfx Afot Dxp Ajnjc

Condition: used, Year of construction: 2023, Tandem axle Air brake PTO shaft 20-piece / Varioterminal 9-inch bale chute / / Dcjdetlrnaspfx Afnoc

Condition: used, Year of construction: 2023, Net binding Drawbar eye fix 40mm Control unit E-LinkPro ISObus Filling indicator / PickUp feeler wheels Overrunning joint Running axle 17 Blind blade with holder 540 rpm / gearbox Additional net reel holder Extendable bale ejector / Dcodpjtlq Hasfx Afnjc

Condition: used, Year of construction: 2023, Control unit E-LinkPro ISObus 13 Blind blade with holder Running axle 540 rpm / gearbox Additional net roller holder Wheel chocks Press roller bearing / (regreasable) Fixed drawbar eye 40 mm / Dcodpotlqxqsfx Afnsc

Condition: used, Year of construction: 2019, OPERATOR control terminal Fixed chamber press with 1.25 mtr. dual circuit / air brake system Tires: 500/50 - 17 pick-up with roller hold-down / input gearbox with 1,000 rpm / Dcedpetia Dfefx Afnsc

Condition: used, Year of construction: 2004, Hydr. reversing Bale size 0.8 - 180 m / Dcjdpfxorxta Eo Afnsc