VHD Jung E.K

Condition: used, Kitamura JigCentre 7 CNC Machining Centre. Serial No. 50274 with Fanuc System 11m CNC Control (Tape), Table Working Area 1500mm x 800mm, Load Capacity 2000kg, Travels X Axis 1100mm, Y Axis 850mm, Z Axis 460mm, Spindle Speeds 60 - 6000rpm, 30 Tool ATC, BT40 Spindle Taper, Rapid Feeds X & Y 12,000mm/min, Z 9,000mm/min, Cutting Feeds 0 - 5000mm/min, Tsudakoma Powered Rotary Table (300 Ø), Machine Weight 8300kg Kedpfx Asznkmuegpolw Location: This lot is located in Birmingham, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchase

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, Machine type: Horizontal machining center Manufacturer: OKUMA Type: MA-400HA Year of manufacture: 2008 Control system: OSP P200M Country of origin: Japan Delivery time: short-term, by arrangement 4-axis machining center, high productivity, including various accessories Klodpezm U Ndefx Agpow Machine equipment: - ConSep chip conveyor system with high-pressure pump - Various software packages - Touchsetter with length measurement and breakage detection - Work area shower Technical details: - Travels - Axes X-axis (column right-left) mm 560 Z-axis (table forward-backward) mm 625 Y-axis (spindle up-down) mm 610 B-axis 1° 0 - 360° - Number of pallets: 2 (pallet changer for 2 pallets) - Pallet size (mm): 400 x 400 - Max. pallet load capacity (kg): 400 - Max. pallet workpiece dimensions (mm): 500/600 x 710 - Spindle speed (rpm): 15,000 - Main spindle (10min/cont): 22/18.5 kW - Tool holder: BT40 - Tool magazine: 60 positions Optional: - Transport organization and execution - Machine delivery and installation - Machine commissioning

Condition: used, Year of construction: 1998, x-travel 1800 mm Kedozmy Tzepfx Agpslw y-travel 1600 mm z-travel 1400 mm Control Siemens 840 C

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 54, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,100 mm, feed length X-axis: 1,400 mm, nominal power (apparent): 170 kVA, controller manufacturer: siemens, controller model: Siemens Sinumerik 840Dsl, workpiece length (max.): 1,100 mm, workpiece width (max.): 1,400 mm, workpiece height (max.): 1,100 mm, workpiece weight (max.): 2,500 kg, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hello, I am selling a DIXI DH 100 II: a 4-axis, dual-pallet CNC milling machine from 2012. Price: 690,000 PLN net. Machining range: X = up to 1400, Y = 1100, Z = 1100 (workpiece weight up to 2500 kg) Spindle: 12,000 RPM, 36 kW Tool holder: HSK A 100 Table: 1000x1000, 2 pcs Tool magazine: 150 positions Coolant through spindle: 70 bar Configuration: Base machine Universal horizontal machining center DIXI DHP 100 4-axis version Control system Siemens SINUMERIK 840DSL Main drive Electric spindle 12,000 RPM Magazine 200-position tool magazine HSK 100 Machine table 2 pallets, 1000 x 1000 mm Cooling / chip removal Chip conveyor with 6 bar pump Coolant tank: 1,400 l Internal coolant supply: 70 bar Cooling unit: CSW2200 PMS Measurement / control Renishaw 3D RMP60 probe BLUM laser probe for tool measurement Additional options 2x Manual rinsing of the machining area – gun Manual control panel (handwheel) 4-color signal lamp Losma oil mist extractor 3 working modes Rotating window in the machine door Automation Automatic pallet changer Documentation Operating manual and electrical diagrams Monitor language Klsdezlxmdepfx Agpjw English Training Not included

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, workpiece weight (max.): 3,000 kg, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, tool weight: 27,000 g, We offer in good condition DMG Mori NHX8000 from 2015 with following options: 30/25 KW 15.000 RPM Spindle SK50 Mapps 4S Control 60 tool ATC 800x800 pallet 3.000 kg max table load Signal light 40 bar Internal coolant Touch probe Kjdpozlqw Iefx Agpelw Machine will be in stock in 2 weeks

Condition: used, Year of construction: 2007, operating hours: 13,400 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 775 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 450 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 72 kVA, torque: 65 Nm, controller manufacturer: Indramat, controller model: MTC 200, total height: 3,000 mm, total length: 6,000 mm, total width: 5,500 mm, table width: 700 mm, table length: 1,100 mm, spindle speed (max.): 16,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 70 bar, distance between spindles: 450 mm, spindle motor power: 28,000 W, number of spindles: 2, number of slots in tool magazine: 100, mount diameter: 63 mm, tool length: 320 mm, tool diameter: 160 mm, tool weight: 8 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine is offered for sale as part of a package that includes two other machines of the same type and with similar operating hours. Ksdozk U Hwspfx Agpelw The advertised price is for the purchase of all three machines, plus a large spare parts package (including two reconditioned spindles), as well as an additional, fourth machine, which the buyer will receive free of charge. The machines can be inspected under power at any time by appointment.

Condition: excellent (used), Year of construction: 2008, operating hours: 18,500 h, functionality: fully functional, controller manufacturer: Haas, controller model: haas, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 40, Haas EC500 2008 ATC-40 tools . BT40. 2 Pallets spndel time -18500H Spindel rpm- 12000 rpm X-axis travel: 813 mm Y-axis travel: 635 mm Z-axis travel: 711 mm Pallet size: 500 x 500 mm Klsdeziflzepfx Agpow Number of pallets: 2 Automatic pallet changer under power Located in Israel ready for inspection

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BBT40 - Spindle power : 22 [kW] - Spindle speeds : 13000 [rpm] - Gearbox LINEAR AXES - Travels on X/Y/Z axes : 735/610/610 [mm] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 100 PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 400X400 [mm] - Pallets number : 2 - Maximum weight upon pallet : 500 [kg] - Maximum workpiece diameter : 700 [mm] - Maximum workpiece height : 960 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 45 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4650X3300 [mm] - Machine height : 2900 [mm] - Machine weight : 17000 [kg] MACHINE HOURS - Number of hours under power : 16042 [h] - Number of working hours : 5768 [h] EQUIPMENT - CNC : Fanuc 16 iMB - Interface : Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 70 [bars] * Coolant through spindle Kljdpfxszhxxre Agpjw * With cabin washing - Chips conveyor - Spindle cooling unit - Tool probe : Renishaw - Workpiece probe : Renishaw - Electric transformer

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Kledpfx Agjzhlfrepjw Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: good (used), TSUGAMI MA 3 H - 10-position pallet changer / Fanuc control - Fanuc 11-M control - Travel ranges X/Y/Z 340x280x410mm - 10-position pallet changer - B-axis 360-degree indexing, 0.001mm - Spindle speed range 35 - 5000 rpm - Feed rate range 1 - 6000 mm/min - Rapid traverse rate 12 m/min - Tool holder BT 40 - Tool magazine 62 positions - Dual-arm gripper - Drive power / spindle motor 7.5 KW - Electronic handwheel - RS 232 interface - Chip conveyor - Central lubrication system Ksdpozhgrtjfx Agpelw - Coolant system - Spindle oil cooler - Documentation Dimensions: L x W x H 4 x 2.4 x 2.4 meters / Weight 7000 kg Subject to errors and omissions.

Condition: used, Year of construction: 2004, Horizontal machining center Manufacturer: Makino Type: a51-A60 Year of construction: 2004 Control: CNC FANUC System 16 iM Travel ranges: X/Y/Z: 560 x 560 x 500 mm Distance from table center to spindle nose: 70 – 570 mm Maximum swiveling height above pallet surface: 900 mm Permissible swiveling range in the working area: 630 mm Tool magazine: 60 storage locations Maximum load weight: 180 kg T-command, 4-digit, freely assignable Tool change time: 0.9 sec. Maximum tool dimensions: Ø 70 mm, 360 mm long Maximum tool weight: 8 kg Spindle unit 50 – 12,000 min/min Spindle unit with tool holder for tapered hollow shanks according to DIN 69893 HSK-A63 Tool clamping force: 29 kN Pallet change system, integrated into the machine Pallet change time: 7 sec. Pallet changer with storage of 2 pallets in alternating sequence on a storage station Pallet holder rotatable, index 90° division 0-position electrically controlled. Kjdpszc Ifrofx Agpslw Permissible load weight max.: 400 kg Pallet size: 400 x 400 mm High-speed machining Contour milling with feed rates up to 40,000 mm/min. Function can be used for milling in 3 axes X, Y and Z 2 ½ axis operation (X/Y axis circular, Z axis linear) for thread and contour milling Direct thread cutting through synchronization of the feed drive of the Z axis via pulse encoder in the spindle motor Speed max.: n = 4,000 min/min Feed drive with AC servomotors Rapid traverse speeds X, Y, Z axes = 1 … 50,000 mm / min. Feed rates X, Y, Z axes = 1 .. 40,000 mm / min. Manual operation mode, freely movable, via direction keys Coolant system Chip and splash guard central chip/flushing system Machine light Rotating beacon light, 3-color Total weight: 7,800 kg Space requirement approx.: 11.5 m2 Overall height approx.: 2.7 m 2 machines available! 22726

Condition: used, Year of construction: 1999, x-travel 560 mm y-travel 510 mm z-travel 510 mm Control MSC 502 Kedpfx Agszczc Rjpolw distance spindle center to table 50 - 650 mm distance Spindlenose and center of table 100 - 610 mm turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 22 / 18,5 kW tool taper MAS BT-40 spindle bearing diameter 70 mm numbers of pallets 2 size of pallet 400 x 400 mm max. workpiecediameter 580 mm max. workpiece height 650 mm switching time 90°: 2,5 sec change time of pallets 6,0 sec number of toolpositions 60 pos. tool taper MAS BT-40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg change-time tool to tool 1,5 sec change-time chip to chip 3,7 sec rapid traverse ( X / Y / Z ) 32 m/min feed speeds 1 - 24.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 63 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 5,5 x 4,5 x 2,7 m CNC - Machiningcenter Horizontal MORI SEIKI - SH 400

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Kjdpezcuyiefx Agpslw Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, operating hours: 55,569 h, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, number of slots in tool magazine: 126, controller model: Fanuc 16 MC Professional 3, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 560 mm Travel in Y-axis: 560 mm Travel in Z-axis: 560 mm Spindle speed: 20,000 rpm Torque: max. 167 Nm Tool interface: HSK-A63 DIN 69893 Tool magazine: 126 positions Tool change time: 1 s Max. tool diameter: 80 mm Max. tool length: 300 mm Distance from spindle nose to table: 150 - 710 mm Distance from table top to spindle center: 80 - 640 mm Pallet size: 400 x 400 mm Pallet load: 400 kg Pallet change time: 7 s Rotary table indexing: 1° Table rotation speed: 5000 rpm Spindle drive: 22 kW Feed rate: max. 40,000 mm/min Rapid traverse rate: 40,000 mm/min MACHINE DETAILS Klsdpfxjzb Ewpj Agpsw Control system: Fanuc 16 MC Professional 3 Total power consumption: 64 kW Dimensions & Weight Footprint: approx. 9.0 x 3.0 x 2.8 m Machine weight: approx. 15 t Operating hours Spindle hours: 55,569 h Program runtime: 66,600 h Power-on time: 163,411 h

Condition: good (used), Year of construction: 1998, Used Kitamura machining centers Type: Mycenter 2X Yasnac CNC control Kljdpfjy U I H Iex Agpew Max. spindle speed: 10,000 rpm Excl. clamping on the table Tool holder: SK 40 X: 610 mm Y: 510 mm Z: 510 mm Tool changer

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller model: FANUC 160is-MB, spindle speed (max.): 12,000 rpm, Submitting a bid obligates you to collect the item within the timeframe of calendar week 29 (July 13 - July 19, 2026)! TECHNICAL DETAILS Travel in X-axis: 560 mm Travel in Y-axis: 510 mm Travel in Z-axis: 560 mm Table length: 400 mm Table width: 400 mm Spindle and Feed Distance between spindle nose and table: 150 - 710 mm Spindle speed: stepless Spindle speed from: 100 rpm Spindle speed to: 12,000 rpm Maximum torque: 150 Nm Working feed rate: 1 - 40 m/min Rapid traverse rate: 40 m/min Workpiece data Max. workpiece length: 620 mm Max. workpiece width: 620 mm Max. workpiece height: 700 mm Max. workpiece weight on the table: 400 kg Pallet changer Pallet station: 2 pallets Number of pallets: 8 Tool magazine Number of tool positions: 60 Tool diameter: 82 mm Klsdpfx Agsy Uy H Hjpsw Diameter with available adjacent positions: 140 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool change time: 1 s Average chip-to-chip time: 3.4 s Tool holder: ISO 40 MACHINE DETAILS Control: FANUC 160is-MB Coolant system: 400 l Coolant through the spindle (IKZ): 20 bar Dimensions (L x W x H): 2,100 x 3,955 x 2,844 mm EQUIPMENT Chip conveyor NC rotary table Coolant/mist extraction Status indicator

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, table load: 400 kg, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, number of axes: 4, This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2010. It features an X-axis travel of 560 mm, Y-axis travel of 560 mm, and Z-axis travel of 630 mm. The machine has a spindle speed of 14,000 rpm and a tool magazine capacity of 60 positions. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH 4000 DCG horizontal machining centre we have for sale. Contact us for further details. • B-axis: Continuous Additional equipment Kjdpfoy Uw I Isx Agpelw • Pallet cubes: 250 × 250 × 600 mm and 400 × 150 × 600 mm • Various tooling • D'Andrea boring head attachment • Full machine manuals • SEI filtration/extraction unit • KUBE mist collector system Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller model: Fanuc 16iMB, workpiece height (max.): 745 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 50, tool weight: 10,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Specification Value Machine Type 4-Axis Horizontal Machining Center Pallet Size 400 x 400 mm Number of Pallets 2 (Automatic Pallet Changer) Table Load Capacity 400 kg X-Axis Travel 610 mm Y-Axis Travel 610 mm Z-Axis Travel 610 mm B-Axis 0.001° Indexing Spindle Speed 20,000 rpm Spindle Taper SK40 Gearbox Yes Spindle Motor Power Approx. 22 kW Kodpfxey Uvhgs Agpslw Rapid Traverse Rate 60 m/min Tool Magazine Capacity 50 Tools Tool-to-Tool Time Approx. 1.3 sec Maximum Tool Weight 10 kg Coolant Through Spindle Yes Chip Conveyor Included Machine Weight Approx. 10,000 kg Kitamura Mycenter HX400iSII horizontal machining center in very good technical condition. Machine equipped with high-speed 20,000 rpm spindle, gearbox, automatic pallet changer (2 pallets), chip conveyor, through-spindle coolant and FANUC 16i-MB control system. Suitable for high-precision and high-speed machining applications.

Condition: used, Year of construction: 2007, x-travel 200 mm y-travel 200 mm z-travel 400 mm Control Siemens 840 D Kledpfx Agey S Eczepew total power requirement 84 kW weight of the machine ca. 19 t dimensions of the machine ca. 7,9 x 6 x 2,7 m

Condition: used, Year of construction: 2010, CNC M57-701 IV Specifications X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 630 mm Continuous B axis Table load capacity: 400 kg Spindle speed: 14,000 rpm Tool holder: BT 40 Tool magazine: 60 positions Accessories Pallet cubes 250x250x600 Pallet cubes 400x150x600 Klsdpfsy Sh Akox Agpjw Various tooling Attachment with D’Andrea facing head Machine supplied with manuals All technical data provided are indicative and subject to change without notice and should not be considered binding.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main Spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet Changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B-Axis Switching time 90°: 2.5 sec Pallet changeover time: 6.0 sec Tool Changer Number of tool positions: 60 Max. tool diameter: 80 mm Max. tool diameter with adjacent magazine slots free: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip change time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Jog feed rate: 0 – 1,260 mm/min MACHINE DETAILS CNC control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Footprint approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Cooling device High-pressure coolant system Kljdpfxey R U Ecj Agpow Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B-axis Hydraulic unit Spindle oil cooler Note: Shaft for loading must be provided by the buyer.

Condition: like new (used), Year of construction: 2011, operating hours: 31,113 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 560 m/min, rapid traverse Y-axis: 560 m/min, rapid traverse Z-axis: 660 m/min, nominal power (apparent): 38 kVA, controller manufacturer: MITSUBISHI MSX-853 IV, workpiece length (max.): 630 mm, workpiece width (max.): 630 mm, workpiece height (max.): 900 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 2,513 mm, total length: 2,720 mm, total width: 4,224 mm, table width: 400 mm, table length: 400 mm, overall weight: 7,600 kg, spindle speed (min.): 12,000 rpm, CNC controller: MITSUBISHI MSX-853 IV Axes X-axis travel mm: 560 Y-axis travel mm: 560 Z-axis travel mm: 660 Distance spindle nose - table surface mm: 80-640 Feed rates m/min: 0-60 Worktable Number of pallets: 2 Table dimensions mm: 400 x 400 Maximum workpiece size (D x H) mm: 630x900 Max. workpiece weight kg: 400 APC time s: 9 División estandar Grados: 360 - 0.001º Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 15/11 Spindle torque Nm: 110 Bearing Inner Diameter mm.: 80 Tipo: SJ-2B4351TK Tool system Tool magazine slots: 40 Max. Tool Diameter: 70 Kedpoy Rn Nbofx Agpslw With free neighboring places mm: 170 Max. Tool Length mm: 450 Max tool weight kg: 8 Tool Shanks : MAS-BT40 Equipment Chip conveyor Workarea light 4th axis Cooling Tank capacity: 170L High-pressure bar: 15 Machine running times Under power: 64.734 Rated power kVA: 38 Operating Time: 31.113 Basic machine dimensions / weight Length mm: 2.720 Width mm: 4.224 Height mm: 2.513 Weight kg: 7.600

Condition: good (used), Year of construction: 2011, functionality: fully functional, Description: Ksdpjy Ehaiefx Agpelw The machine is in good technical condition, with testing possible by prior arrangement. Control system: OKUMA OSP-P200MA. Power consumption: 58 kVA. Travel distance in X-axis: 1000 mm, Y-axis: 900 mm, Z-axis: 1000 mm. Description: 4 axes. Weight: 26 t. Footprint: 3.3 x 6.5 m. Tool magazine capacity: 100. Tool clamping system: BT50. Machine parameters: Travels in X, Y, Z axes: 1000 x 900 x 1000 mm.

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 512 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller model: FANUC 18i, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 64, CNC horizontal machining center, 4 axes X Y Z B (360,000) Automatic Workpiece Change: 5 palettes 400×400 mm Kjdpfx Aoy Azakjgpjlw Tool magazine: 64, BT40 Tool change time: 3 seconds CNC control: Fanuc 18i Motor and drive: Fanuc

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D SL, overall weight: 21,000 kg, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 80, number of axes: 5, This 5-axis SCHMID SE 368 horizontal machining centre was manufactured in 2019. It features a Siemens Sinumerik 840 D SL control, rapid traverse rates of 75/40/90 m/min in X/Y/Z, and a shuttle table. Equipped with dual NC rotary swivelling units, a 30-fold tool changer, and HSK-A63 tool holder. Max speed is 10,000 rpm. Includes a chip conveyor and recooling system. A great opportunity to buy this SCHMID SE 368 horizontal machining centre. Contact us for further details regarding this horizontal machining centre. Additional equipment • Double spindle • Shuttle table • 2x 2 NC rotary swivelling units • Switch cabinet system • Chip conveyor Knoll 600K-1 2019 • Hydraulic unit Kedpjyyuwwefx Agpjlw • Filter system • Recooling system Lahntechnik KOF1803-100 2020 • Number of tool magazine positions: 2x 30 • Rotary table (NC / hydraulic clamping) : n x 360o, vertical axis, Machine Benefits Technical Machine Benefits • Ibag three-phase main drive : s1-100% 40 kw / s6-40% 52 kw • Key performance data working spindle kw s1 : 3 12 29 40 40 • Spindle speeds approx. 1/min : 1,000 5,000 10,000 20,000 24,000 • Torque approx. Nm : 27 27 27 19 17 • Tool diameter with free neighbouring positions : 125 mm • Swivelling table (nc / hydraulic indexing) : vertical axis, 0° - 180°, max. Rotation angle in connection with 5th axis : +/- 150° • Rotary table diameter : 400 mm, rotary table (horizontal axes u1-u2/ v1-v2), rotary table (nc / hydraulic clamping) : n x 360o, vertical axis, rotary table diameter : 330 mm • Pallet clamping : 2 zero point clamping modules/ table • Position measuring systems : absolute position measuring systems • Position tolerance x - y - z : 0. 008 mm (vdi/dgq 3441) Extra Information Machine still under power