Used Strecker Limburg for sale (189)

Year of construction: 2011, condition: ready for operation (used), Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: ca. 1800mm/1100mm/1600mm, Gewicht: ca. 2300kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich. Bwedpjwfg Edsfx Acwsn

Condition: excellent (used), used container system, dry, sealed, uncleaned - consisting of 6 units of 20-foot containers = approx. 90m² - reinforced floor Dimensions per container: Length: 6.00 m Width: 2.50 m External height: 2.96 m Internal height: 2.70 m Insulation: Roof: 100 mm Walls: 60 mm Floor: 100 mm Equipment: - 2x double-leaf exterior doors - Plastic windows with insulated glazing and tilt/turn function - Blinds - Electric heating - Sealing gaskets - Wall cladding - Ceiling cladding - Transition plates - Container clamps - Structural calculations available The unit is dismantled and prepared for transport. Bwsdjyt Nzcjpfx Acwsn Loading and transport can be arranged. Only serious and reputable inquiries will be answered, stating: name, e-mail address, and telephone number.

Condition: used, Year of construction: 2013, - Brand : Omme - Type: 2500 ED - Year of construction: 2013 - Weight: 3300 kg. - Hours diesel engine: 4787 hours - Drive: Kubota diesel - Working height: 25 meters - Lateral reach: 13 meters - Wheel Drive / Movers - Dutch license plate registration - Safety inspection valid until 12-11-2026 - Aerial work platform book available - Maintenance history available - CE document available * Brand: around * Working height: 25 meters Bedpfx Aey T R R Hecwewn *Type: 2500 EBDZ * Drive: Kubota diesel * Lateral reach: 13 meters * Construction year: 2005 * Weight: 3500 kg. * Hours diesel engine: 3526 uur * Hours electrical motor: 1290 uur

Condition: used, Year of construction: 2021, - Brand: EP - Type : CPD20L2 Bedpfsy Ti Nbsx Acwewn - Year of construction: 2021 - Hours : 986 hours - Drive: Electric / Lithium - Lifting capacity: 2000 kg. - Lifting height: 4800 mm. - Clearance height: 2200 mm. - Sideshift - Freelift - Neat and tidy forklift - Lithium battery pack - Battery charger - Video on our website - Trade-in and transport possible * Brand: EP *Type: CPD20L2 * Construction year: 2021 * Hours: 986 uur * Drive: Electro / Lithium * Lifting capacity: 2000 kg. * Lifting height: 4800 mm. * Clearance height: 2200mm. Video on website: Yes

Condition: not inspected (used), Year of construction: 1993, functionality: unexamined, machine/vehicle number: 121.23.90.02.0493, input voltage: 380 V, Equipment: documentation/manual, Lisec filling station A1RL. Bwjdpfx Acjy S Rl Uswon

Condition: ready for operation (used), functionality: fully functional, number of drawers: 9, total height: 2,150 mm, total width: 1,610 mm, total length: 3,850 mm, fork length: 90 mm, Manual storage with 9 positions for sheets L3250xH1700mm; each rack has a support pad of 9cm and 500kg capacity. Bwodpfoy N Thgex Acwon External dimensions +/-: L3850xW1610xH2150mm

Condition: ready for operation (used), functionality: fully functional, number of drawers: 9, total height: 2,150 mm, total width: 1,610 mm, total length: 3,850 mm, fork length: 90 mm, Manual storage with 9 positions for sheets L3250xH1700mm; each rack has a support pad of 9cm and 500kg capacity. Bwodpsy N Tdhefx Acwsn External dimensions +/-: L3850xW1610xH2150mm

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 18/12, total length: 4,100 mm, total width: 1,850 mm, total height: 2,400 mm, overall weight: 800 kg, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, power: 2 kW (2.72 HP), The SBM 1500 offers fully automatic blasting of glass between 3mm-40mm thickness, with up to twenty stored programmes for repetitive work, or fully creative manual blasting with an air-cushioned, counterbalanced gun. The unique design of the Bohle SBM 1500 means the rear wall and glass remain stationary, while the entire blast cabinet moves across the glass, which is held securely in place by a vacuum seal. This construction ensures that the sandblasted glass remains scratch-free, and with no infeed or outfeed, the machine is ideal for tight working areas, occupying a footprint of only 4m x 1.85m. Despite its compact dimensions, the open-topped design accommodates large sheets with ease, and by rotating, the 1.5m blast stroke can be doubled. The Bohle SBM 1500 is engineered for high throughput and minimal maintenance, offering approximately 10 square metres per hour coverage and featuring hard-wearing Boron Carbide nozzles for maximum service life. Bsdpfeyntt Eex Acwewn

Condition: ready for operation (used), functionality: fully functional, number of drawers: 7, total height: 2,450 mm, total width: 2,650 mm, total length: 2,950 mm, fork length: 250 mm, Very strong build storage rack with 7 positions for sheet size L2330xH1800mm; each rack has a 25cm pad. Bjdpfxsy N Tavs Acwjwn Transport width of W2700mm required—the construction is welded! Total external dimensions: L2950xW2650xH2450mm.

Condition: ready for operation (used), functionality: fully functional, number of drawers: 12, total height: 2,770 mm, total width: 3,140 mm, total length: 3,850 mm, fork length: 135 mm, 12-position manual storage rack for sheets L3250x2250mm, each level with a pad of 13.5 cm. Outside dimensions: approx. L4200xW3140xH2770mm. Bjdpfey N S U Ssx Acwewn

Condition: ready for operation (used), functionality: fully functional, number of drawers: 16, total height: 2,570 mm, total width: 3,500 mm, total length: 5,850 mm, 16 positions semi-automatic storage rack for sheets, L3250x2550mm Bodoy N S Tuopfx Acwewn Positions 1, 12, 13, 14, and 15 have a pad of 25 cm, positions 2 to 11 have a pad of 8 cm. External dimensions approx. L5850xW3500xH2565mm (hydraulic drive)

Condition: ready for operation (used), functionality: fully functional, total height: 2,200 mm, total width: 3,350 mm, total length: 30,000 mm, load capacity per storage section: 2,500 kg, support length: 15 mm, 6 modules of 15-position storage racks in line, the first section with pads of 19cm, the other 5 with pads of 15cm, load capacity per frame 2,500 kg. Loading-unloading opening: +/-950mm for glass sheets 3250x2550mm. Bjdpfx Aoy N S Sdscwown Total space required for the complete system: approx. L30 meters x W3,350mm x H2,200mm.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: GG65LC-13642, input voltage: 380 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 543LMT-J: PLF float glass cutting table with Low-e coating grinder LMT. SN: GG65LC-13642 (2600Kg-39.1A-10kA) from 2007. Bottero 352 BCS at the end of the cutting/grinding line as a break-out table. SN: GG60SB-3040 (2250Kg - 50Hz - 14.5kVA-380V) from 1995. Bwjdpfjw I Dvksx Acwon

Condition: used, Year of construction: 2007, - Brand: Manitou - Type : 105 VJR2 - Year of construction: 2007 - Weight: 3280 kg. - Hours: 982 hours - Working height: 10 meters - Lateral reach: 3.2 meters - Lifting capacity: 200 kg. Bedpfxey Iz Ifj Acwjwn - Drive: Battery - Built-in battery charger (220 volts) - Non-marking tires - New safety inspection possible - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: Manitou *Type: 105 VJR2 * Construction year: 2007 * Working height: 10 meters * Weight: 3280 kg. * Hours: 982 uur * Lateral reach: 3.2 meters * Drive: Battery * Lifting capacity: 200 kg.

Condition: used, Year of construction: 2013, - Brand: Bluelift - Type : C13 - Year of construction: 2013 - Weight: 1500 kg. - Hours: 1234 hours - Working height: 13 meters - Lateral reach: 7.5 meters - Lifting capacity: 230 kg. - Drive: Petrol + 220 volts - Safety inspection possible - Aerial work platform book available - CE document available - Machine is in good condition - Possible with tilting machine transporter € 2950,- - Video on our website - Trade-in and transport possible * Brand: Bluelift *Type: C13 * Construction year: 2013 * Weight: 1500 kg. * Hours: 1234 uur * Working height: 13 meters Aerial work platform book: Yes * Lateral reach: 7.5 meters * Lifting capacity: 230 kg. CE document: Yes Video on website: Yes Bodpfey Ituwjx Acwjwn * Drive: Petrol + 220 volts Safety inspection: Yes

Condition: used, Year of construction: 2006, - Brand: Hinowa - Type: Goldlift 14.70 Bwodpfxoy Ituds Acwsn - Year of construction: 2006 - Weight: 1700 kg. - Hours: 2395 hours - Working height: 14 meters - Lateral reach: 7 meters - Lifting capacity: 200 kg. - Drive: Petrol + 220 volts - Adjustable tracks - Safety inspection valid until 19 Aerial work platform book available - CE document available - Machine is in very neat condition !! - Possibly with machine transporter € 2950,- - Video on our website - Trade-in and transport possible * Brand: Hinowa * Weight: 1700 kg. *Type: Goldlift 14.70 * Construction year: 2006 * Hours: 2395 uur * Working height: 14 meters * Lateral reach: 7 meters * Lifting capacity: 200 kg. Aerial work platform book: Yes * Drive: Petrol + 220 volts CE document: Yes Video on website: Yes Safety inspection: Yes

Condition: used, Year of construction: 2013, - Brand: JLG - Type: E400 AJPN - Year of construction: 2013 (1X) - Year of construction: 2011 (2x) - Weight: 6829 kg. - Year of manufacture: 2011 - 2037 hours: €12950,- - Year of manufacture: 2011 - 2086 hours: € 12,950,- - Year of manufacture: 2012 - 1629 hours: € 15750,- - Working height: 14 meters Bjdpfxsy Itt To Acwewn - Lateral reach: 7.9 meters - Lifting capacity: 230 kg. - Rotatable work tray - Rotating jib - Drive: Battery - Built-in battery charger (220 volts) - Non-marking tires - New safety inspection possible - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: JLG *Type: E400 AJPN * Weight: 6829 kg. * Working height: 14 meters * Lateral reach: 7.9 meters * Lifting capacity: 230 kg. * Drive: Battery

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, pressure (max.): 250 bar, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB Bwodsng Exajpfx Acwon OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room Bodpsnh R Ekofx Acwjwn - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, bending radius (min.): 9 mm, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Bedpfx Acsndn Agowswn Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction Bwjdpsnfvx Nefx Acwsn - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding Bwjdpfjndk N Aex Acwsn TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm Bjdpfx Acsng A R Sewswn - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: Bedpfeng Amksx Acwjwn - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 1018, control type: PLC-controlled, degree of automation: manual, actuation type: electric, pipe diameter (max.): 50 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, warranty duration: 24 months, Equipment: CE marking, emergency stop, foot remote control, quick-change device, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry Bjdpsnfvy Usfx Acwown - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site