Used Strecker Limburg for sale (203)

Condition: used, Year of construction: 2013, - Brand: Bluelift - Type : C13 - Year of construction: 2013 - Weight: 1500 kg. - Hours: 1234 hours - Working height: 13 meters - Lateral reach: 7.5 meters Gsdpfx Aey Ituwehnoiu - Lifting capacity: 230 kg. - Drive: Petrol + 220 volts - Safety inspection possible - Aerial work platform book available - CE document available - Machine is in good condition - Possible with tilting machine transporter € 2950,- - Video on our website - Trade-in and transport possible * Brand: Bluelift *Type: C13 * Construction year: 2013 * Weight: 1500 kg. * Hours: 1234 uur * Working height: 13 meters Aerial work platform book: Yes * Lateral reach: 7.5 meters * Lifting capacity: 230 kg. CE document: Yes Video on website: Yes * Drive: Petrol + 220 volts Safety inspection: Yes

Condition: used, Year of construction: 2006, - Brand: Hinowa - Type: Goldlift 14.70 - Year of construction: 2006 - Weight: 1700 kg. - Hours: 2395 hours - Working height: 14 meters - Lateral reach: 7 meters - Lifting capacity: 200 kg. - Drive: Petrol + 220 volts Godpjy Itudofx Ahnoiu - Adjustable tracks - Safety inspection valid until 19 Aerial work platform book available - CE document available - Machine is in very neat condition !! - Possibly with machine transporter € 2950,- - Video on our website - Trade-in and transport possible * Brand: Hinowa * Weight: 1700 kg. *Type: Goldlift 14.70 * Construction year: 2006 * Hours: 2395 uur * Working height: 14 meters * Lateral reach: 7 meters * Lifting capacity: 200 kg. Aerial work platform book: Yes * Drive: Petrol + 220 volts CE document: Yes Video on website: Yes Safety inspection: Yes

Condition: used, Year of construction: 2022, - Brand : Comet - Type: Leopard 25 - Year of construction: 2025 - Weight: 4070 kg. - Hours : 652 hours - Drive: Petrol + 220 volts - Working height: 25.5 meters - Lateral reach: 11.5 meters - Lifting capacity: 200 kg. - Remote control - Adjustable tracks - Rotatable work tray - New safety inspection - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: Comet *Type: Leopard 25 * Construction year: 2025 * Weight: 4070 kg. Giodpfxewhqife Ahneu * Hours: 652 hours * Drive: Petrol + 220 volts * Working height: 25.5 meters * Lateral reach: 11.5 meters * Lifting capacity: 200 kg.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, pressure (max.): 250 bar, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch Giedeng Exaepfx Ahnsu OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, bending radius (min.): 9 mm, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. Giedpfx Asndn Agjhnou The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site Gsdpfx Ahsnh R Eksneiu

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case Gsdponfvx Nsfx Ahnjiu - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering Gisdpfx Aondk N Ashneu - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 1018, control type: PLC-controlled, degree of automation: manual, actuation type: electric, pipe diameter (max.): 50 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, warranty duration: 24 months, Equipment: CE marking, emergency stop, foot remote control, quick-change device, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction Gijdenfvy Uspfx Ahnju TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction Gedpfx Aheng Amksneiu TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: Gsdpfx Aheng A R Senjiu - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 100 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 8 mm, bending angle (max.): 195 °, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB Gijdpfx Asnh R Suohnsu OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: Godpfx Aeng Ax Sjhnsiu - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 216 h, power: 3.8 kW (5.17 HP), axle configuration: 4x4, load capacity: 230 kg, lifting height: 18,230 mm, lifting power: 230 kg/m, platform length: 2,200 mm, platform width: 800 mm, overall weight: 8,360 kg, fuel type: electric, tire condition: 90 %, color: orange, Equipment: UVV, all wheel drive, === MAIN SPECIFICATIONS === Year: 2018 Operating hours: 216 h Max platform capacity: 230 kg Boom type: Articulated Jib: Yes Continuous rotation: Yes (360° continuous) Platform rotation: Yes (90°) Platform size (L × W): 220 cm × 80 cm Tyres: Non-marking Power supply: Electric Max working height: 20.23 m CE certification: Yes Weight: 8,360 kg 🔋 New battery package installed (2024) === HIGHLIGHTS === ✅ Carefully selected from reliable sources with verifiable history ✅ Equipped with a new battery package – ready for heavy-duty operation ✅ CE certification and full documentation included ✅ Ready for immediate transport and use ✅ Comprehensive technical documentation available Gisdpjxctygsfx Ahnju === CONDITION === Excellent working condition. Fully tested and inspected. Available for inspection on request. === LOCATION & DELIVERY === 📍 Located in Sittard, The Netherlands 🚚 Worldwide delivery available 💰 €37,500 (EXW / excluding VAT) 💰 €45,375 incl. VAT (21%) Reliable electric articulated boom lift with low operating hours, full CE certification, and a brand-new battery package ensuring maximum uptime. Ideal for both indoor and outdoor use thanks to zero-emission operation, non-marking tyres, and 4×4 drive. Part of one of Europe’s largest stocks of immediately available access platforms. Spare parts and professional after-sales support available on request. === DELIVERY === • Crane loading available on request • Flexible shipping options tailored to your destination • All logistics handled professionally by the Collé Rental & Sales logistics team

Condition: new, functionality: fully functional, Year of construction: 2023, power: 0.5 kW (0.68 HP), load capacity: 200 kg, lifting height: 2,500 mm, lifting power: 200 kg/m, platform length: 1,000 mm, platform width: 730 mm, overall weight: 285 kg, fuel type: electric, color: orange, Equipment: UVV, === KEY SPECIFICATIONS === Year: 2023 Operating hours: 2 h Machine width: 0.75 m Drive system: Manual / Push-around wheels Drivable at full height: No (manual lift) Platform extension: No Power: Manual lift (no engine) Working height: 4.5 m Platform capacity: 200 kg (1 person + tools) Power type: Manual Battery type: 12V D.C. battery Outriggers self-leveling: No Platform dimensions (L x W): 1.0 × 0.73 m Tyres: Non-marking push-around wheels CE certification: Yes Machine weight: 285 kg Indoor / Outdoor use: Both _____ === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Comprehensive technical documentation available Giodpfjxct A Uox Ahnsu _____ === CONDITION === Clean, original unit with minimal operating hours. Manual lift, no engine. Immediately available from our Sittard stock. _____ === LOCATION & DELIVERY === Located in Sittard, Netherlands Worldwide delivery possible Price: €4,995 (EXW / excluding VAT) _____ Reliable first-owner manual lift with complete service history and technical documentation. Perfect for indoor and outdoor work where compact size and simple operation are key. Benefit from one of Europe’s largest stocks of new and used lifting equipment. All machines are CE certified and ready for immediate use. _____ === DELIVERY === Crane loading available upon request for smooth handling and shipment. Flexible transport options tailored to your destination and logistics preferences. All shipping handled professionally by the Colle Rental & Sales logistics team.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 699 h, power: 4 kW (5.44 HP), axle configuration: 4x2, load capacity: 227 kg, lifting height: 11,140 mm, lifting power: 227 kg/m, platform length: 1,170 mm, platform width: 760 mm, overall weight: 6,427 kg, construction height: 2,000 mm, fuel type: electric, tire size: 56 × 18 × 45 cm, tire condition: 70 %, wheelbase: 1,580 mm, ground clearance: 90 mm, color: blue, Equipment: UVV, === MAIN SPECIFICATIONS === Year of manufacture: 2007 Hours of use: 699 h Working height: 11.14 m Max. horizontal outreach: 6.53 m Platform capacity: 227 kg Platform dimensions (L x W): 1170 x 760 mm Upper structure rotation: 355° (non-continuous) Platform rotation: Yes, 180° Boom type: Articulated Jib: Yes (pendulum arm ±139°) Drive type: Electric Four-wheel drive: No (2WD) Tyres: Non-marking solid tyres Giodpfx Ahsxct Dxoneu Stabilisers: No Engine manufacturer: Genie (Electric drive system) Emission class: N/A (Electric) Weight: 6,427 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with full maintenance history CE-certified with complete documentation Fully inspected, tested and ready for immediate use Available for fast worldwide delivery Low-noise and ideal for indoor operation === CONDITION === In good working condition – fully inspected and tested by certified technicians. Last inspection: 2019 Visually clean, batteries in working condition. Inspection on site possible upon request. === LOCATION & DELIVERY === Located in Sittard, The Netherlands Worldwide delivery available Price on request (EXW / excl. VAT) The Genie Z-30/20N is a compact and highly manoeuvrable electric articulated boom lift, ideal for indoor and tight-space operations. With its zero tailswing, non-marking tyres and quiet electric drive, it is perfect for maintenance and installation work in warehouses, factories and shopping centres. Well maintained, CE-certified, and ready for operation. Offered by Collé Rental & Sales – one of Europe’s leading suppliers of new and used access equipment. === DELIVERY === Crane loading available on request. Professional transport and export documentation arranged by the logistics team of Collé Rental & Sales. Fast delivery within the EU and worldwide.

Condition: new, functionality: fully functional, Year of construction: 2022, operating hours: 6 h, power: 55.4 kW (75.32 HP), load capacity: 454 kg, mast type: telescopic, lifting height: 24,800 mm, lifting power: 454 kg/m, platform length: 2,440 mm, platform width: 910 mm, overall weight: 14,300 kg, transport length: 7,820 mm, transport width: 2,500 mm, transport height: 2,960 mm, construction height: 2,960 mm, fuel type: diesel, fuel consumption per hour: 5.5 l/h, fuel tank capacity: 135 l, tire size: 385 / 45 – 28 (Ruw terrein, Non-marking), tire condition: 100 %, wheelbase: 2,800 mm, ground clearance: 410 mm, color: red, Equipment: UVV, all wheel drive, differential lock, soot filter, tilting carriage, === KEY SPECIFICATIONS === Year: 2022 Operating hours: 6 h Working height: 24.80 m Max. horizontal outreach: 17.80 m Platform capacity: 454 kg Platform dimensions (L × W): 2,440 × 910 mm Platform rotation: Yes (180°) Turret rotation: 360° (continuous) Boom type: Telescopic Jib: Yes (standard, length 2.31 m, vertical rotation 135°) Drive type: Diesel Drive system: 4×4 Stabilisers: No Tyres: Non-marking (385/45-28, rough terrain) Engine manufacturer: Deutz D2.9 L4 – 55.4 kW (74 HP) Emission class: Stage V Weight: 14,300 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Fully inspected and tested by certified professionals === CONDITION === Excellent working condition – fully checked, maintained, and tested by professionals. Inspection available upon request. Gijdpfx Ajxct Hyohnju === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excluding VAT). The Magni DTB 24 RT is a powerful diesel telescopic boom lift with a working height of 24.8 metres and a horizontal outreach of 17.8 metres. Thanks to its 4×4 drive, proportional controls, and 360° continuous rotation, this machine ensures excellent stability, performance, and safety on any terrain. It is equipped with a reliable Deutz Stage V engine, non-marking off-road tyres, and a standard jib with 135° vertical rotation. Fully CE certified, supplied with complete technical documentation, and immediately available from stock. === DELIVERY === Crane loading available on request for smooth handling during dispatch. Flexible delivery options tailored to your destination and logistics preferences. All transport is professionally handled by the Collé Rental & Sales logistics team.

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 2,720 h, power: 38 kW (51.67 HP), load capacity: 227 kg, mast type: telescopic, lifting height: 15,720 mm, lifting power: 227 kg/m, platform length: 2,440 mm, platform width: 760 mm, overall weight: 6,709 kg, transport length: 8,480 mm, transport width: 2,240 mm, transport height: 2,490 mm, construction height: 2,490 mm, fuel type: diesel, fuel consumption per hour: 4.5 l/h, fuel tank capacity: 76 l, tire size: 12-16.5 NHS (Ruw terrein), tire condition: 75 %, wheelbase: 2,200 mm, ground clearance: 320 mm, color: blue, Equipment: UVV, all wheel drive, === MAIN SPECIFICATIONS === Year of manufacture: 2013 Operating hours: 2,720 h Working height: 15.72 m Max. horizontal outreach: 11.18 m Platform capacity: 227 kg Platform dimensions (L x W): 2440 x 760 mm Platform rotation: Yes, 160° Giodpfexct I Rsx Ahnou Upper structure rotation: 360° continuous Boom type: Telescopic Jib: Yes (articulating jib ±135°) Drive type: Diesel Four-wheel drive: Yes (4x4) Stabilisers: No Tyres: Rough terrain, air-filled Engine manufacturer: Perkins 404D-22, 38 kW (51 hp) Emission class: Stage IIIA Weight: 6,709 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with full maintenance history CE-certified with complete documentation Fully inspected and ready for immediate use Equipped with a powerful Perkins diesel engine and 4x4 drive Ideal for rough terrain and height work up to 15.7 m === CONDITION === In good working condition – fully inspected and tested by certified technicians. Clean appearance, engine and hydraulics in proper working order. On-site inspection possible upon request. === LOCATION & DELIVERY === Located in Sittard, The Netherlands Worldwide delivery available Price € 22.000 (EXW / excl. VAT) The Genie S-45 is a robust telescopic boom lift with excellent terrain capability and smooth control. Powered by the reliable Perkins 404D-22 diesel engine, 4x4 drive, and a maximum working height of 15.7 m, this lift is ideal for construction, maintenance, and installation work at height. Fully CE-certified, technically inspected, and ready for immediate operation. Offered by Collé Rental & Sales – your trusted European partner for new and used access equipment. === DELIVERY === Crane loading available on request. Professional transport and export documentation handled by the logistics team of Collé Rental & Sales. Fast delivery within the EU and worldwide.

Condition: new, functionality: fully functional, power: 127 kW (172.67 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 320 l, color: blue, overall weight: 21,800 kg, lifting power: 6,000 kg/m, lifting height: 29,900 mm, tire size: 445/65 R22,5, tire condition: 100 %, axle configuration: 4x4, emission class: euro5, Year of construction: 2023, operating hours: 13 h, Equipment: UVV, air conditioning, all wheel drive, cabin, pallet forks, === KEY SPECIFICATIONS === Year: 2023 Operating hours: 13 h Max lifting capacity: 6,000 kg Max lifting height: 29.90 m Max outreach: 25.90 m Rotation: 360° continuous Stabilizers: Telescopic Engine manufacturer: Yanmar Engine power: 127 kW / 173 HP Emission class: Stage V Transmission type: Hydrostatic Drive type: 4x4x4 Tyres: 445/65 R22.5 Weight: 21,800 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Brand-new condition, only 13 operating hours. Fully maintained and unused — original paint, documentation, and service record included. Equipped with: • Pallet forks • Air conditioning • Auxiliary hydraulics • Remote control Giodpfx Aoxct S Ajhnsu • Platform preparation • Winch preparation === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery possible. Price: € 245,000 (EXW / excluding VAT) Price incl. 21% VAT: € 296,450 The Magni RTH 6.30 SH is a high-performance rotating telehandler offering exceptional lifting power and precision. With a 29.9 m lifting height, 6,000 kg capacity, and 360° continuous rotation, it is ideal for demanding industrial and construction projects. Powered by a Yanmar Stage V engine (127 kW / 173 HP) and featuring a hydrostatic drive and telescopic stabilizers, it ensures maximum stability and efficiency. === DELIVERY === Crane loading available on request for hassle-free handling. Flexible dispatch options tailored to your destination and logistics preferences. All shipping handled professionally by the Collé Rental & Sales logistics team.

Condition: new, functionality: fully functional, Year of construction: 2022, operating hours: 37 h, axle configuration: 4x4, load capacity: 230 kg, mast type: telescopic, lifting height: 20,000 mm, lifting power: 230 kg/m, platform length: 1,200 mm, platform width: 920 mm, overall weight: 10,000 kg, fuel type: diesel, tire condition: 100 %, color: red, Equipment: UVV, all wheel drive, === KEY SPECIFICATIONS === Year: 2022 Operating hours: 37 h Max. platform capacity: 230 kg Boom type: Articulated Jib: Telescopic Rotation: Continuous (360°, option available) Platform rotation: Yes (180°) Platform size (L × W): 120 × 92 cm Tailswing: 8.00 m Tyres: Foam-filled Power supply: Diesel Max. working height: 20.00 m Max. outreach: 12.00 m Weight: 10,000 kg CE certification: Yes Remote control: No Gisdpfjxct Udjx Ahnju === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certified with full documentation Ready for immediate use and transport Ideal for construction and maintenance applications indoors and outdoors === CONDITION === Excellent working condition — fully checked, maintained, and tested by professionals. Available for inspection on request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands Worldwide delivery possible Price €89.500 (EXW / excluding VAT) Reliable first-owner machine with complete service history and CE certification. 20 m working height and 12 m outreach make it ideal for large-scale projects and precise positioning. Professionally maintained and ready for immediate operation. === DELIVERY === Crane loading available on request for hassle-free handling at departure. Flexible dispatch options tailored to your destination and logistics preferences. All shipping handled professionally by the Collé Rental & Sales logistics team.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 175 l, color: red, overall weight: 14,400 kg, empty load weight: 14,400 kg, lifting power: 4,999 kg/m, lifting height: 17,400 mm, tire size: 445/65 R19.5, tire condition: 100 %, axle configuration: 4x4, emission class: euro5, mast type: telescopic, Year of construction: 2025, operating hours: 1 h, Equipment: air conditioning, all wheel drive, pallet forks, parking heater, === KEY SPECIFICATIONS === Year of manufacture: 2025 Operating hours: 1 Maximum lifting capacity: 4,999 kg Maximum lifting height: 17.40 m Maximum outreach: 14.50 m Drive: Diesel Transmission: Automatic (hydrostatic) Four-wheel drive: Yes Stabilisers: Yes (pivoting type) Cab: Enclosed cab with air conditioning Heated cab: Yes Fork length: 1,200 mm (pallet forks) Tyres: Rough terrain (445/65 R19.5) Engine manufacturer: Deutz – 55.4 kW (75.3 hp) Emission class: Stage V Weight: 14,400 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certified and supplied with full documentation Compact rotating telehandler with 360° continuous rotation Equipped with Deutz Stage V engine and hydrostatic transmission Comfortable cab with air conditioning and heating Three steering modes: 4x4, concentric, and crab steering Includes pallet forks, pivoting stabilisers and high-performance hydraulic system Immediately available from stock === CONDITION === Excellent working condition – fully inspected, maintained and tested by certified technicians. Inspection available upon request. === LOCATION & DELIVERY === Gijdpjxdatiofx Ahnju Located in Sittard, the Netherlands. Worldwide delivery possible. Price on request (EXW / excluding VAT). The Magni RTH 5.17 is a compact and versatile rotating telehandler designed for precision handling and maximum efficiency. With 360° continuous rotation and a lifting capacity of 5 tonnes, this model is ideal for construction, industrial and installation work. Equipped with a Deutz Stage V engine, hydrostatic drive and pivoting stabilisers, it offers excellent stability and control on all terrains. === DELIVERY === Crane loading available on request for smooth and safe transport. Flexible shipping options adapted to your destination and logistics needs. All transports are professionally managed by the logistics team

Condition: new, functionality: fully functional, power: 160 kW (217.54 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 10 l/h, fuel tank capacity: 270 l, color: red, overall weight: 22,500 kg, empty load weight: 22,500 kg, lifting power: 8,000 kg/m, lifting height: 26,600 mm, tire size: 445/65 R22,5, tire condition: 100 %, axle configuration: 4x4, emission class: euro5, mast type: telescopic, Year of construction: 2025, operating hours: 1 h, Equipment: air conditioning, all wheel drive, cabin, === KEY SPECIFICATIONS === Year of manufacture: 2025 Operating hours: 1 (new) Maximum lifting capacity: 8,000 kg Maximum lifting height: 26.60 m Maximum outreach: 23.10 m Drive: Diesel Gedpfxexdat Ns Ahnjiu Transmission: Automatic (hydrostatic) Four-wheel drive: Yes Stabilisers: Yes (telescopic type) Cab: Enclosed cab with air conditioning and panoramic visibility Heated cab: Yes Fork length: 1,200 mm (standard pallet forks) Tyres: Rough-terrain (445/65 R22.5) Engine manufacturer: Volvo – 160 kW (218 hp) Emission class: Stage V / Tier IV Final Weight: 22,500 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certified and supplied with complete documentation Rotating telehandler with 360° continuous rotation Powered by a robust Volvo Stage V engine and hydrostatic transmission Comfortable cab with air conditioning, heating and excellent visibility Telescopic stabilisers for maximum stability and lifting performance Three steering modes: 2-wheel, 4-wheel and crab steering Immediately available from stock === CONDITION === New machine – fully inspected, tested and ready for operation. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery possible. Price on request (EXW / excluding VAT). The Magni RTH 8.26 is a powerful and versatile rotating telehandler engineered for demanding construction and industrial applications. With an 8-ton lifting capacity and a lifting height of 26.6 meters, this machine offers impressive performance and precision. Equipped with a Volvo Stage V engine, hydrostatic drive and telescopic stabilisers, it ensures maximum safety, efficiency and control on any terrain. === DELIVERY === Crane loading available on request for smooth and safe transport. Flexible shipping options tailored to destination and logistics requirements. All transports are professionally managed by the logistics team

Condition: new, functionality: fully functional, Year of construction: 2025, power: 1.5 kW (2.04 HP), load capacity: 150 kg, lifting height: 7,500 mm, lifting power: 150 kg/m, platform length: 700 mm, platform width: 600 mm, overall weight: 430 kg, tire condition: 100 %, color: blue, Equipment: UVV, === MAIN SPECIFICATIONS === Year: 2025 Operating hours: 0 (new) Machine weight: 430 kg Working height: 9.5 m Platform capacity: 150 kg Platform size: 0.70 × 0.60 m Drive system: Manual push-around (not self-propelled) Drivable at full height: No Platform extension: No Power: 220 V AC / 1.5 kW or 12 V DC / 1.5 kW Power type: Electric (AC/DC options) Battery type: Lead-acid 12V / 85Ah Outriggers self-leveling: Yes (manual stabilizers) Tyres: Non-marking Indoor / Outdoor use: Indoor Colour: Yellow CE certified: Yes === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Brand new 2025 machine, unused. Clean exterior with original factory paint. Battery tested and in perfect condition. Available immediately from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery possible. Price on request (EXW / excl. VAT). The Dingli GTWY9.5-1300 is a reliable push-around vertical mast lift with a compact design and excellent safety features. Perfect for indoor maintenance, installation, and facility work. Benefit from Colle’s large European stock of new and used access equipment. Gjdpfx Asxf Ebbehnoiu All machines are fully CE certified, documented, and ready for immediate use. Spare parts and technical support available on request. === DELIVERY === Crane loading available upon request for smooth transport during shipment. Flexible dispatch options tailored to your destination and logistics preferences. All transports are professionally handled by the logistics team of Collé Rental & Sales.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, power: 125 kW (169.95 HP), load capacity: 250 kg, mast type: telescopic, lifting height: 22,700 mm, lifting power: 250 kg/m, platform length: 1,400 mm, platform width: 700 mm, overall weight: 3,390 kg, empty load weight: 3,350 kg, transport length: 7,710 mm, transport width: 2,220 mm, transport height: 2,990 mm, construction height: 2,990 mm, fuel type: diesel, fuel consumption per hour: 8 l/h, fuel tank capacity: 80 l, tire size: Continental pneumatisch (voor & achter 100 %), tire condition: 100 %, wheelbase: 3,665 mm, color: blue, Equipment: ABS, UVV, soot filter, === MAIN SPECIFICATIONS === Year: 2025 Mileage: 778 km Working height: 24.7 m Max horizontal outreach: 16.9 m (13.3 m with 250 kg load) Platform capacity: 250 kg Truck type: Mercedes-Benz 315 CDI Number of axles: 2 Drive type: 4x2 Transmission: Automatic Cab: Single Engine power: 125 kW Fuel type: Diesel (Stage VI) Platform dimensions (L x W): 1,400 × 700 mm Platform rotation: Yes (2 × 90°) Gijdoxf Egdepfx Ahnsu Boom type: Articulated telescopic (4-section aluminium boom) Stabilisers: Yes – 3 configurations (in contour, full, one-side extended) CE certification: Yes (European type approval) Total vehicle weight: 3,390 kg === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history. Fully CE-certified with complete documentation. Maximum working height of 24.7 m and outreach up to 16.9 m. Full working height reachable with maximum load (250 kg). Automatic positioning system, Home function, and stabiliser control at the base. Optional accessories: tree-cutting package, tool tray, chainsaw bracket, traffic cone rack, insulation package. === CONDITION === Brand new 2025 machine with only 778 km. Fully inspected, tested, and ready for immediate use. Available for fast worldwide delivery. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price €192.500 (EXW / excluding VAT). The Palfinger P 250 BK is a new-generation truck-mounted platform with a working height of 24.7 m and a horizontal outreach up to 16.9 m. Mounted on a Mercedes-Benz 315 CDI (Euro Stage VI) chassis, it combines power, precision, and low emissions. The aluminium work basket (1.40 × 0.70 × 1.10 m) features a 230V CEE socket and dual 90° rotation. With automatic stabilisation, Home function, and optional accessories, this lift is ideal for maintenance, installation, and tree-care operations. Fully CE-certified and available for immediate delivery from Sittard. === DELIVERY === Crane loading available on request. Flexible worldwide shipping solutions tailored to your destination and logistics preferences. All logistics are handled professionally by the Collé Rental & Sales team.

Year of construction: 2020, condition: used, General information New: Yes Field of application: Construction Weights Empty weight: 510 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Gijdpfx Aoxb Syvshnou Visual appearance: very good Other information Delivery terms: EXW Cutting power: kN Production country: IT Additional information Please contact Sales Department Collé Sittard for more information