Schmiede Wirz

Condition: used, Year of construction: 2024, functionality: fully functional, year of last overhaul: 2024, Forging Hammer Type Beche KGH 8.0 Modernization 2023-2024 (Year of manufacture: 1980) The hammer has been completely overhauled in Germany. Hydraulic Drive - Completely disassembled in 2024, cleaned, control valves renewed New Control System - Siemens S7-1500F PLC control with touch panel Anvil Base (U-frame) - Contact surface ground - Insert adapted Kjdpfx Ajxwat Ned Hodw - Wedge newly manufactured and inserted Test Run - Hammer was assembled in 2024 and underwent a test run in 2025 Technical Description: Working capacity: 80 kJ Max. die height: 600 mm (without dovetails) Min. die height: 200 mm (without dovetails) Ram depth: 810 mm Ram weight: 6,100 kg Anvil base weight: 105,000 kg Total weight: 130,700 kg Total height: 7.3 m above floor level

Condition: not inspected (used), Year of construction: 1993, functionality: unexamined, machine/vehicle number: AQ1195020, overall weight: 1,800 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obligates timely collection between 01/12/2025 and 05/12/2025! MACHINE DETAILS Motor Total power: with hydraulics 5.0 kW / without hydraulics 7.2 kW Voltage: 400 V Total current: with hydraulics 12 A / without hydraulics 18 A Frequency: 50 Hz Motor protection class: IP 55 Hydraulics Max. flow rate: 6.4 l/min Max. pressure: 200 bar Oil tank capacity: 13 l Recommended hydraulic fluid: ESSO Hydraulic Oil HLP32 Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,350 x 1,500 mm Total weight: 1,800 kg Kdedpfxoxp Nque Ad How EQUIPMENT Accessories as shown in the photos Technical documentation

Condition: used, Year of construction: 1960, length 880 mm weight 60 kg Kedpfow Syi Usx Ad Hsdw height 320 mm

Condition: ready for operation (used), Forging hammer CM 2500, Romania. The hammer is similar to Huta Zygmunt MPM 6300B. - Maximum impact energy at maximum stroke – 7000 kgm - Ram weight – 2500 kg Kdsdpfxew Sdxae Ad Hew - Mode of operation – pneumatic - Ram stroke – 850 mm - Number of blows per minute – 100 - Working pressure – 5 - 7 bar - Anvil weight – 48 t - Total weight – 65 t

Condition: ready for operation (used), Romanian Forging Hammer CM 3150 The hammer is similar to Huta Zygmunt MPM 10000B. - Maximum impact energy at maximum stroke – 10,000 kgm; Kdjdpfxjw Sdwve Ad Hew - Ram weight – 3,150 kg; - Mode of operation – pneumatic; - Ram stroke – 900 mm; - Number of blows per minute – 90; - Working pressure – 5 – 7 bar; - Anvil weight – 63 t - Total weight – 100 t.

Condition: good (used), Forging Hammer - Meitinger Record - Very good overall condition - Various forging inserts Kdsdpsw H S Irsfx Ad Hew - Large support flange - Foot switch - Connection cable Dimensions (LxWxH): 1.5x0.7x1.7 meters / Weight: 1800 kg Errors and omissions excepted.

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine Kedpfx Asw Dgi Ted Hsdw equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, Forging units - Units consisting of 3 machines, to ensure efficient and automatic series production: 1 piece of ring rolling mill, 1 piece of manipulator, 1 piece ofring raw press The forging units / machines can be inspected by appointment. Condition: In good working order / operational. Item 1: Ring rolling mill Brand: WAGNER / Type: RAW 125/100 / Year of manufacturing: 1986 Item 2: Transport manipulator Brand: DANGO & DIENENTHAL / Type: STM 12 / Year of manufacturing: 2001 Kdjdpfx Adowx Sqrs Hjw Item 3: Ring blank press (electro-hydraulic) Brand: WAGNER / Type: RStPö 1500 S / Year of manufacturing: 1986 NOTE: Just the complete package is available for sale (no individual items). There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale. Detailed technical data sheets and information on equipment available on request.

Condition: good (used), Offer 21339 Technical data: Kjdpswp Hgiofx Ad Hodw - Total width approx. 740 mm - Work surface length / track length approx. 510 mm - Work surface depth / track depth approx. 150 mm - Total depth approx. 330 mm - Round horn approx. 220 mm - Pass-through square hole in track approx. 27 mm - Anvil height approx. 380 mm - Wooden block B 650 x D 500 x H 450 mm - Weight anvil approx. 200 kg - Weight wooden block approx. 70 kg

Condition: ready for operation (used), Year of construction: 1964, Forming stages: 3, press force: 6500kN, stroke rate: 110rpm, ram stroke: 180mm, working range X/Y: 600mm/800mm, table dimensions X/Y: 800mm/1000mm, ram adjustment: 10mm, drive power: 37kW. On-site inspection is possible. Kdedewm Nm Hjpfx Ad Hew

Condition: ready for operation (used), Year of construction: 1955, An Eumuco screw forging press (Screw-Press) is available. Forming stages: 2, press force: 1250kN, hold-down force: 2500kN, stroke rate: 80rpm, ram stroke: 140mm, hold-down stroke + punch: 100mm, table dimensions X/Y: 680mm/680mm, ram dimensions X/Y: 680mm/680mm, drive power: 35kW. On-site inspection is possible. Kdedpfx Adjwm Nm Ts Hew

Condition: used, Year of construction: 1921, length 620 mm width 130 mm height 300 mm weight 88 kg Antik Kodpfx Adewhqzhj Hjdw +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), We can offer Sakamura cold nut formers models: NP 430, NP 440, NP 450, NP 460, NP 480 Diameter of bars from 4mm -33 mm All machines underpowered Kjdpfx Asv H Ap Aod Hjdw

Condition: used, Blow energy: 4000 kg/m Kdjdpfjvam Ezox Ad Hsw Max. stroke: 520 mm Max. stroke rate: 125 s.p.m. Die height: 350 mm Ram weight: 1760 kg Dimensions L x W x H: 2250x1400x3300 mm Weight of machine approx.: 40500 kg

Condition: used, Blow energy: 11000 kg/m Max. stroke: 900 mm Daylight between guides: 750 mm Length of die seat in ram: 750 mm Max. stroke rate: 90 s.p.m. Die seat length in die holder: 1050 mm Kedovam Enspfx Ad Hodw Min. die thickness: 350 mm Max. upper die weight: 1100 kg Operating height: 780 mm Anvil weight: 75000 kg Weight of machine approx.: 103000 kg

Condition: used, Blow energy: 11000 kg/m Max. stroke: 900 mm Daylight between guides: 750 mm Length of die seat in ram: 750 mm Max. stroke rate: 90 s.p.m. Die seat length in die holder: 1050 mm Min. die thickness: 350 mm Max. upper die weight: 1100 kg Ksdjvam Ebopfx Ad Hodw Operating height: 780 mm Anvil weight: 75000 kg Weight of machine approx.: 103000 kg

Condition: used, Year of construction: 1978, Blow energy: 7000 kg/m Max. stroke: 850 mm Max. stroke rate: 100 s.p.m. Kdjdpevam D Rofx Ad How Length of die seat in ram: 650 mm Ram weight: 2500 kg Die seat length in die holder: 900 mm Min. die thickness: 300 mm Max. upper die weight: 800 kg Operating height: 780 mm Anvil weight: 47500 kg Weight of machine approx.: 64000 kg

Condition: used, Technical details: weight of the machine approx.: 179 kg space requirements of the machine approx.: 0,75 x 0,335 x 0,340 m Kodpfx Adju Nkw Rj Hsdw Use: for forging work Material cast steel Working surface LxW: 510 x 140mm Horn length: 225mm Ø 28 - Ø 110mm Mandrel square 28 x 28mm *

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Stroke max. 630 mm Bear weight 630kp Kdodpfeu Eb Niex Ad Hsw Top pressure - filling pressure 5 bar

Condition: new, Say-Mak SPH 50 - Pneumatic forging hammer - Welded steel construction - Regular striking with valve adjustment - Pneumatic working system with 2 pistons - Hour counter - All dies and sal-block interchangeable, sal-block adjustable in 8 directions - Adjustable sal-block for the operator's working angle - Simple and functional automatic lubrication system for front and rear pistons Ksdpfx Adeuzhkro Hedw - Adjustable foot pedal depending on working height and foot protection cover - 360° adjustable flanged plunger and plexiglass cover - incl. steel foundation Technical specifications - Operating mode: pneumatic - Drop weight: 50 kg - Lifting height: 185 mm - Motor power: 4 kW - Weight: 1000 kg - Dimensions WxHxD: 730 x 1450 x 1750 mm

Condition: new, Zimas H20 - Air forging hammer - solid cast iron body - steel base Kodpfxjuzhc Is Ad Hodw - Hand and foot operation - Adjustable oiler - incl. upper and lower tool (flat dies) Technical specifications - Capacity: 20 kg - Stroke rate: 270 / min - Lifting height: 200 mm - Projection: 180 mm - Cylinder Ø: 115 mm - Working height: 850 mm - Motor power: 2.2 kW - Voltage: 400 V - Dimensions WxHxD: 520 x 1550 x 1180 mm - Weight: approx. 520 kg

Condition: used, Year of construction: 1960, width 1000 mm weight 88 kg Kdodpfsuhh E Tox Ad Hsw height 390 mm

Condition: used, Year of construction: 1970, pressure . t stroke . mm impact capacity 60-70 mkp total power requirement . kW Kdsdsud Tp Nopfx Ad Hjw weight of the machine ca. 3 t dimensions of the machine ca. . m

Condition: excellent (used), Year of construction: 1982, total height: 5,600 mm, pressing force: 400 t, air pressure: 6 bar, distance between side stands: 650 mm, distance between stands: 1,600 mm, stroke length: 280 mm, table length: 1,600 mm, table width: 1,120 mm, Trimming press in working condition: Nominal force: 400 ton Ksdpsubyrxefx Ad Hsdw Stroke: 280 mm Number of strokes per minute: 36 1/min Table size: 1 600 x 1 120 mm Slide size: 1 435 x 960 mm Main electric motor: 37 kW Overall dimensions: - Length: 3 010 mm - Width: 2 135 mm - Height: 5 600 mm Total weight: 50 000 kg.

Condition: new, - Solid cast iron body - Steel substructure - Hand and foot operation Kodpfx Adstr Dhmj Hsdw - Adjustable oiler - incl. upper and lower tool (flat dies) Technical data: - Capacity: 25 kg - Stroke rate: 250 / min - Lifting height: 250 mm - Projection: 200 mm - Cylinder Ø: 125 mm - Working height: 850 mm - Motor power: 2.2 kW - Voltage: 400 V - Dimensions WxHxD: 570 x 1630 x 1310 mm - Weight: approx. 670 kg