Karl G. Miller Holding GmbH & Co. KG

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008 / 576, cutting height (max.): 250 mm, cutting width (max.): 150 mm, saw drive: 15,000 W, power: 15 kW (20.39 HP), warranty duration: 6 months, NEVA warranty includes plug & play equipment: - material guiding per choice: channels, center guide, side guide Hsdpfxsxtm Raj Aaqjw - 2 frames, 2 sets of saw blades and 2 sets of spacers - assembly frame and accessories - torque wrench, set of tools, etc. - complete revison of machine before leaves our factory The ORBIT Plus Thin Cutting Frame Saw was developed for cutting solid wood blocks into gluable slats with a minimum of saw kerf waste. Thin Cutting Frame Saw ORBIT utilizes a unique up/down method of movement for cutting veneer slats. Unlike conventional frame saws that move up and down in a lineal motion, the ORBIT Thin Cutting Frame Saw uses a patented swing-out motion at the bottom of the saw stroke. Applications of use: Parquet and engineered flooring, doors, windows, stairs, furniture, musical instruments, pencils, sport equipment (ski, snowboards, hokey sticks), wooden-covers for fruit and vegetables, etc. This unique movement of Thin Cutting Frame Saw ORBIT has several distinct advantages over the frame movements on older, conventional frame saws. With a conventional frame saw, a great deal of heat is generated by sawdust that is captured/packed into and around the saw blade teeth. This occurs because the sawdust and wood chips are unable to clear out from the blade during the upstroke. This fact is especially true when cutting high, as some of the teeth in the center of the saw blades never clear out of the cut. Because the ORBIT saw frame moves out of the cut during the upstroke, wood chips and sawdust fall clear from the saw blades. The result is less heat build up on the saw blade, longer saw blade life, dust free slats, the ability to use a thinner kerf saw blade and first of all increased production capacity of the ORBIT frame saw.

Condition: excellent (used), functionality: fully functional, saw blade diameter: 350 mm, chain width: 300 mm, extraction nozzle diameter: 150 mm, working height: 110 mm, type of input current: three-phase, height adjustment type: mechanical, saw blade bore: 70 mm, spindle diameter: 48 mm, OGAM PO-280 Track Multirip Saw Specification: • Condition – used, after complete overhaul • Manufacturer – OGAM • Model – PO-280 • Track width: 300 mm • Max working height – 110 mm • Main motor power: 25 HP (~18 kW) • Maximum blade diameter: 350 mm • Spindle Ø48 mm, sleeves Ø70 mm • Track feed speed adjustment range: 5–40 m/min • Track in very good condition, no wear • Extraction nozzle Ø150 mm • Weight – approx. 2000 kg • Overall dimensions – 190 x 150 x 165 cm (W x L x H) Additional information: • The machine is in very good technical condition, ready for immediate use • The photos shown represent the actual condition of the item for sale Hsdpfxsxtc Iuj Aaqow • Test running and inspection of the machine on site are possible.

Condition: good (used), Year of construction: 2006, max. thickness of cut prism: 150 mm max. width of cut prism: 400 mm spindle diameter: 70 mm spindle working length: 330 mm circular saw blade diameter: 250–425 mm spindle keys (x2): 20x5 mm capacity (8h): 18 m³ main spindle motor power: 30 kW spindle drive motor speed: 2900 rpm feed drive motor power: 2.2 kW feed drive motor speed: 1425 rpm Hodpjxtaghefx Aaqjw feed speed (stepless adjustment): 0–13 m/min network voltage (50 Hz): 3x400V dimensions (L/W/H): 3050/1410/1400 mm weight: 1000 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, CML - DEP FLEXIBLE LINE FOR WINDOWS ELEEMNTS PRODUCTION AS PER LAYOUT LY-09-087-05 DATED 27/01/2010 01 BELT CONVEYOR 1=4500 mm 02 "L" TRANSFER WITH PVC COATED ROLLERS AND BUFFER 03 DOUBLE END TENONER CML MOD. STDA 336 04 FULL SYSTEM FOR MACHINE CONTROL Hodjxtacijpfx Aaqew SEE TECHNICAL FEATURES ATTACHED PDF-FILE

Condition: used, Year of construction: 1998, functionality: fully functional, cutting height (max.): 160 mm, saw blade diameter: 450 mm, cutting width (max.): 450 mm, chain width: 450 mm, type of input current: three-phase, track width: 450 mm, working width: 870 mm, disc diameter: 450 mm, – very good condition – manufactured in the Czech Republic – year of manufacture: 1998 TECHNICAL SPECIFICATIONS: – track width: 450 mm – cutting height: 160 mm – max. blade diameter: 450 mm – main motor power: 45 kW – min. cutting length: 800 mm Hsdpfxextabxj Aaqsw – max. input material width: 870 mm – shaft diameter: 65 mm – sleeve diameter: 80 mm – feed adjustable via frequency inverter – feed speed range: 4-40 m/min – three rows of anti-kickback pawls – connection spigot diameter: 300 mm – dimensions (L/W/H): 240 x 210 x 200 cm – weight: 3300 kg

Condition: used, Raimann KBUBM multi-blade saw for the precise and economical ripping and/or edging of solid wood, glued laminated timber, or panel materials into multiple strips. Its robust construction and powerful drive ensure high cutting accuracy and continuous operation in industrial applications. Ideal for sawmills, wood processors, and furniture manufacturing. chain width: 210 mm cutting height: about 70 mm engine power: 22 kW Hjdpfxexryl Io Aaqew

Condition: good (used), Multiblade saw SCM M3 Maximum cutting height: 100 mm Conveyor belt width: 300 mm Minimum cutting length: 390 mm Drive motor: 18.5 kW with laser unit Weight: approx. 1,800 kg Hjdpfx Aasxrtq Djqsw Location: Austria, Ried im Innkreis

Condition: used, Year of construction: 2006, functionality: fully functional, cutting height (max.): 170 mm, saw blade diameter: 450 mm, cutting width (max.): 450 mm, – Year of manufacture: 2006 – Original paint TECHNICAL SPECIFICATIONS: – Main motor: 30 kW – Feed motor: 1.5 kW – Cutting height: 170 mm – Cutting width: 450 mm – Max. blade diameter: 450 mm – Two upper pressure rollers – Two lower feed rollers – Spindle diameter: 70 mm – Feed speed adjustable via gear motor – Three rollers before and after the saw – Roller length: 64 cm Hedpjxqlu Esfx Aaqsw – Dimensions (L/W/H): 280 x 140 x 160 cm – Weight: 1100 kg

Condition: excellent (used), Year of construction: 1983, cutting height (max.): 120 mm, saw blade diameter: 350 mm, working width: 250 mm, Hardly used multi-blade saw from a training workshop 22 kW motor Chain width 250 mm 250 mm clearance on the right Max. cutting height 120 mm With wide additional roller conveyor for return, approx. 4 m long Hjdpexqg Tiefx Aaqow

Condition: ready for operation (used), MULTIBLADE PRIMULTINI MRA cutting height 160 mm motors 110+110 kW conveyor 550 Hedpfx Asxqgvwoaqjw

Condition: excellent (used), Year of construction: 2001, Multi-blade saw PAUL K 34 G/800, year 2001, 70 kW, minimum workpiece length 460 mm, maximum cutting height 95 mm, nominal passage width 2200 mm, saw spindle Ø 50 mm, max. saw blade Ø 270 mm, roller drive by chain. Hodpfsxp Nckox Aaqow

Condition: good (used), Year of construction: 1994, The feed hydraulic pump is missing. Otherwise, the machine is operational. Hedpfx Aoxn Ukkoaqew

Condition: good (used), Year of construction: 1989, GABBIANI SA/350 Multirip Saw Track width: 300 mm Shaft width: 300 mm Max cutting height: 120 mm Max blade diameter: 350 mm Blade bore diameter: 70 mm From above: 2 rows of pawls + Smooth pressure shaft, sliding + Pressure roller + Shaft with saw blades + 2 smooth, sliding pressure shafts + From below: Guide + Hsdpfx Aasxn Szmeqow Pawls + Track (chain feed) + 2 feed speeds + Main motor approx. 35 kW Feed motor 1.3 kW Central lubrication + Table size (L/W): 2000x710 mm Dimensions (L/W/H): 2400x1350x1350 mm Weight: 1360 kg

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, Equipment: rotational speed infinitely variable, Costa Leopard cross-cut saw series Equipped with 2 new 45 kW IE3 premium efficiency electric motors. Feed chain and sprockets fully refurbished. With automatic central lubrication system. Refurbished for our own use. Blade diameter: 300 mm Max cutting height: 200 mm Max cutting width: 400 mm Weight approx. 5,500 kg Hodpfx Asxm Uidsaqjw

Condition: excellent (used), Meren Jonson Multi-Saw with Automation Powered roller infeed with centering Roller outfeed with side pusher Rubber crawler feed system Press rollers under the shaft for cutting short pieces Smooth feed speed adjustment Maximum cutting height: 100 mm Hsdpfx Aoxm Sd Eoaqjw Supported saw shaft Main motor: 75 HP (56 kW)

Condition: used, SCM M3 double edger, in good condition, 300 mm cutting width, 100 mm cutting height Hedexlnpnjpfx Aaqow

Condition: used, Year of construction: 1998, total width: 1,200 mm, total length: 2,600 mm, total height: 2,200 mm, Weight: 2.200 kg Price: On request - Year: 1998 Hsdpfx Aasxixkqoqjw - Documentation available: No - Serial number: 265 - Transport dimensions: 2600mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 2200kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1981, Chain width: 340 mm Cutting height: 200 mm 2 x 45 kW motors Shaft diameter: 65 mm Electric height adjustment Feed speed variably adjustable via frequency inverter Includes an additional 3 saw bushings and many spacer rings Still ready for demonstration in a small business; technically flawless condition, but has not been in use for quite some time Hsdpoxiu Dmofx Aaqew

Condition: excellent (used), Catalogue number 7752 TECHNICAL DATA - Track width: 300mm - Cutting width: 300mm - Saw blade diameter: 400mm - Cutting height for blade 350: 150mm - Spindle diameter: 70mm - Table dimensions: 1740x750mm - Height from base to table: 750mm Hedpfx Aasxhc Tyeqow - Top section: - Pawls/kickers - 2 smooth, metal sliding shafts - Shaft with saws - 2 smooth, metal sliding shafts - Bottom section: - Guide rail - Pawls/kickers - Track - Electric adjustment of body height - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 2.2kW - Main motor: 37kW - Extraction nozzle diameter: 2x150mm - Overall dimensions (LxWxH): 1900x1600x1750mm - Weight: approx. 2500kg ADVANTAGES – German-made – DTR technical documentation – Used multi saw – Very good condition Net price: 38,900 PLN Net price: 9,260 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant fluctuations)

Condition: excellent (used), Bargain with only 4,800 hours: Kälin multi-blade saw, 250 mm chain width, 300 mm saw blades, 30 HP stepless, chain in very good condition. Hjdsxg Trqepfx Aaqsw

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, cutting height (max.): 80 mm, overall weight: 1,500 kg, saw blade diameter: 280 mm, input voltage: 400 V, Powerful lamella saw from Swedish production. Equipped with a 30 kW motor. Additional saw blades and spacer rings are included in the scope of delivery. Very good condition, beam width 200 mm. Transport across Europe can be organized at a good price. Hedpfx Asxg N Emoaqow

Condition: used, Multi-saw Manufacturer: Standart Hjo Model: SM 80 Length: 1.55 m Width: 1.15 m Height 1.25 m Hsdpoxf Hm Eofx Aaqjw

Condition: used, Multisaw Manufacturer: Standart Hjo Model: SM 80 Length: 1.55 m Width: 1.15 m Hedpfxsxf Hfho Aaqow Height 1.30 m

Condition: used, Multisaw Length: 1.00 m Hedpfx Aoxf E E Toaqow Width: 1.65m Height 1.30m

Condition: excellent (used), CATALOG NUMBER 7751 TECHNICAL DATA - Track width: 250mm - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW - main motor: 15kW - extraction port diameter: 200mm - overall dimensions L/W/H: 1640x1400x1550mm Hsdpfx Aajxft Dweqjw - weight: 1000kg ADVANTAGES – Italian manufacture – in very good condition – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)