Upcycle B.v.

Condition: excellent (used), For sale: a Rapid 1514 shredding mill from the Range 15 series. The machine has been inspected and is in working order. It is suitable for shredding appropriately selected materials, including plastic waste. The unit features a feed hopper, a cutting chamber with blades, an electric motor, and a control panel with an emergency stop switch. The photos also show the interior of the working chamber. Data from the nameplate: - Manufacturer: Maskin AB Rapid, Sweden - Type: 1514 Nsdpfez Ezuujx Afuowl - Series: Range 15 - Year of manufacture: 1994 - Machine number: 260319 The machine is used and shows signs of wear, which can be seen in the photos. The condition and scope of equipment are shown in the photographs.

Condition: excellent (used), For sale: a fully functional Müller Maschinen SM 152 shredding mill. The machine is equipped with a hopper, a chamber with blades, a screen, and a control panel with an emergency stop switch. The visual condition and equipment are shown in the photos. Data from the nameplate: - Manufacturer: Müller Maschinen GmbH, Germany Njdjz Ezt Rjpfx Afuswl - Type: SM 152 - Year of manufacture: 2003 - Power supply: 400 V, 50 Hz - Power: 2.2 kW - Current: 5.2 A - Protection rating: IP54 - Machine number: 15203023

Year of construction: 2015, condition: good (used), functionality: fully functional, Getecha cutting mill for plastic parts Type: RS 165-A1.5 The cutting mill was used only rarely. It is in used condition visually, but in very good technical condition. Nodpfx Afjz Epgrouowl The pictures show some minor surface rust in the grinding chamber. This will wear off during the first use. Serial number: 18711 Year of manufacture: 03/15 Wiring diagram no.: ES18711 Connection: 3 × 400 V / N / PE Frequency: 50 Hz Connected load: 2.5 kVA

Year of construction: 2012, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile Nwedpfx Afez A S Dnjuel -Type: G15035-DT -Drive motor: Siemens 2.2 kW -Funnel opening: 620 x 350 mm -Outlet: 350 x 180 mm -Sieve: Hole size 5 mm -Dimensions: 650/630/H1240 mm -Weight: 192 kg

Condition: used, Feed opening: approx. 600 x 580 mm Rotor width: approx. 600 mm Nodpfxozy Hvis Afujwl Rotor diameter: approx. 450 mm Stator knives: 2 Rotor knives: 4

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Nedpezy Hu Eofx Afuewl Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Nedozy Hulopfx Afuowl Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Cutting mill Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Nwedpfezy Hk Hex Afujl Drive motor 250 kw

Year of construction: 2005, condition: excellent (used), Description New blades and counterblades with suction HS-40/SL-SP Specifications Nwedezwwdxepfx Afuel Manufacturer TRIA Model BM 50-30 Year 2005 Condition Used Stock Number AI2182

Condition: used, Year of construction: 2014, power: 30 kW (40.79 HP), WEIMA WLK 800 – 30 kW – Single-Shaft Shredder – 2014 For sale: professional WEIMA WLK 800 single-shaft shredder, manufactured by the well-known German company WEIMA Maschinenbau GmbH. The machine is designed for shredding various types of materials and industrial waste. The WLK series features a robust, heavy-duty construction designed for continuous operation in recycling and manufacturing facilities. Technical specifications: • Manufacturer: WEIMA Maschinenbau GmbH, Germany • Model: WLK 800 • Year of manufacture: 09/2014 Nodpfx Afjzv Tk Ejuewl • Serial number: 510-1282 • Rotor width: 800 mm • Motor power: 30 kW • Voltage: 400 V • Frequency: 50 Hz • Rated current: 70 A • Rotor speed: 90 rpm • Machine weight: approx. 2.8 t • CE marked Applications The WEIMA WLK 800 can be used for shredding, among other materials: • plastics, • PE, PP, HDPE and LDPE materials, • plastic pipes and profiles, • production waste, • wood and wood-based materials, • packaging, • containers and crates, • other industrial waste suitable for single-shaft shredding.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 14764, Key operating data Motor power (standard): 5.5 kW Cutting diameter of the rotor: 300 mm Rotor width / cutting length: 125 mm Rotor speed: 230 rpm (slow-speed system for noise and dust reduction) Average output (throughput): 80 kg/h (depending on the type of plastic and the mesh size of the screen) Nwjdpfx Afeztplgsujl Power supply: 3 x 400 V + N, 50 Hz Cutting system and working chamber Opening of the shredding chamber: 450 x 335 mm Opening of the feed hopper: 490 x 420 mm Number of rotating knives (on the rotor): 10 Number of fixed knives (on the stator): 2 Cutting geometry: Shear cutting with a slanted rotor, which facilitates the handling of three-dimensional parts Standard screen: Mesh size 6 mm (round, interchangeable) Particle size of the recovered regranulate: Standard 4–8 mm (depending on the installed screen) External dimensions and weight Machine length: 1100 mm Machine width: 900 mm Machine height: 2100 mm (for the version with a high stand frame for dust extraction) Total weight: 500 kg Additionally: new replacement knives, three screens with 5, 6 and 8 mm Cross magnet in the feed hopper!

Condition: excellent (used), functionality: fully functional, Manufacturer: Dreher, Germany Model: 26/26 GFS Dimensions of the grinding chamber: 260 x 260 mm Power: 5.5 kW New blades 3 rotor blades 2 stator blades Additional sieve Nwedpfjztfl Nex Afujl

Year of construction: 1995, condition: excellent (used), functionality: fully functional, Manufacturer: Rapid, Sweden Type: 1535 Dimensions of the grinding chamber: 350 x 150 mm Power: 4 kW New blades 15 rotor blades 2 stator blades Additional 2 screens with hole diameters of 6/5 mm and 4 mm Nwsdpfeztfkxjx Afuol

Year of construction: 2003, condition: excellent (used), functionality: fully functional, Motor power (direct drive): 3.0 kW (gearbox motor) Rotor speed: approx. 200 rpm (the low speed reduces noise and dust generation) Dimensions of the cutting chamber: 270 x 180 mm Dimensions of the rotor: diameter 180 mm / cutting width 180 mm Njdpfx Asztfh Dsfuewl Cutting system: 18 rotating blades (stepped/segmented arrangement on discs) and 2 fixed blades (holder with 4 cutting edges) Blade design: The quick-snap blade system eliminates the need for readjustment of the gap after sharpening (the blades lock into a fixed position). Machine weight: approx. 130 kg Dust extraction: Lower stainless steel container, prepared for pneumatic (vacuum) dust extraction. Additional blades and sieve.

Condition: excellent (used), functionality: fully functional, Slow-speed mill Model CAS-20 Dimensions of the grinding chamber: 260 x 180 mm Nwedpfoztd I Aex Afuel Power: 2.2 kW 18 rotor blades 2 stator blades Replacement blades

Condition: excellent (used), Digicolor Goliath 2 Plus (cutting mill for plastics) technical data: Model: Goliath Plus 2 Grinding chamber size: 228 × 265 mm Cutting principle: Slow-speed toothed roller cutting mill Rotational speed: approx. 25 RPM Motor power: 0.75 kW Material: Thermoplastic sprues, molded parts, and production waste Special features: Vertical motor (space-saving), low-dust shredding, reversible combs, easy blade replacement Nwodpfxozrnfpo Afuol Goliath Plus 2: 228 × 265 mm The mill is in excellent condition! The grinding material container has a level sensor that prevents the mill from running "in its own juices"!

Year of construction: 1999, condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades -Manufacturer: Getecha, Side-mounted mill cutting mill -Type: GRS182-A1.50 -Funnel opening: 310 x 290 mm -Sieve perforation: Ø 6 mm -Dimensions: 720/700/H1220 mm -Weight: 210 kg Nwjdpfxezrfbne Afujl

Condition: excellent (used), Year of construction: 2024, operating hours: 3 h, functionality: fully functional, Single-shaft shredder Vespa 40/60 VGA, manufactured in 2024, 3 operating hours for test run, 16 blades on the shaft, hole size 15 mm, shaft length 590 mm, power 15 kW, weight 1620 kg, serial number 990. Nwjdpfx Afozqtdnsuel

Year of construction: 2003, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology Nwjdpfozn Iqkex Afuol -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: 1528 -Drive motor: 2.2 kW -Funnel opening: 280 x 180 mm -Outlet: 280 x 180 mm -Sieve: Hole size 6 mm -Quantity: 1 cutting mill available -Dimensions: 600/550/H1140 mm -Weight: 183 kg

Year of construction: 2003, condition: used, functionality: fully functional, Three Wanner auxiliary mills are for sale, with a few technical details: Two of the mills have had a new motor installed! The new price of the mill is over €7,000... The motor alone costs €1,200... Grinding chamber opening: 170 mm x 320 mm Rotor diameter: 220 mm Rotor blades: 12, in good condition Stator blades: 2, good condition Motor power: 4 kW Weight: 165 kg Njdpfx Aozn Ibisfuowl Throughput: 25-30 kg/h Height: 1700 mm Frame width: 520 mm

Year of construction: 2010, condition: like new (used), functionality: fully functional, MFT 30/300S Set – Used Professional Equipment For sale, a professional set in excellent condition, ready for immediate use. The set includes: MFT 30/300S Big Bag FAS 300 with mobile suction unit Njdpfx Afozncrpjuswl This set provides a complete solution, ideal for professionals seeking high-performance, robust, and operational equipment for use in a workshop or on a construction site. Optional: Rapid Vario 70 Primus available as an additional unit for an extra €2,600. The equipment has been carefully maintained, offering excellent value for money compared to new equipment. Sale as a set is preferred.

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Knife Granulator PC42100R – 45 kW – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are the official representative of 3E Machinery in Poland. We offer new and used shredders, knife granulators, and complete recycling systems. We offer a new industrial knife granulator, 3E Machinery PC42100R, equipped with a powerful 45 kW main motor and a 1,000 mm wide rotor. The PC42100R is designed for efficient size reduction and granulation of various types of plastic and other recyclable materials. Its robust construction and specially designed cutting system ensure high efficiency, stable operation, and a uniform final fraction. TECHNICAL SPECIFICATIONS: Model: PC42100R Type: Industrial knife granulator / cutting mill Main motor power: 45 kW Rotor length: 1,000 mm Rotor diameter: 420 mm Cutting chamber: 1,034 × 540 mm Moving knives – V arrangement: 3 × 2 / 5 × 2 pcs. Moving knives – S arrangement: 3 × 10 / 5 × 10 pcs. Fixed knives: 2 × 2 pcs. Standard screen perforation: 12 mm Machine dimensions (L × W × H): 1,770 × 1,842 × 2,425 mm Machine weight: approx. 3,230 kg Condition: Brand new The PC42100R is also available in a 55 kW motor version, depending on the customer's requirements and processed material. APPLICATIONS: Nsdpfxsznbv Hj Afuowl The PC42100R knife granulator is suitable for processing various recyclable materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, injection molding waste, plastic pipes and profiles, plastic crates and containers, sheets and technical plastics, pre-shredded cable waste, various production and industrial plastic waste. The machine can operate as an independent granulator or as part of a complete recycling line. For larger or bulkier materials, we recommend combining the PC42100R with a single-shaft shredder with a hydraulic pusher, which performs the first shredding stage. The pre-shredded material is then transferred to the PC42100R for final granulation. GrabTrade offers complete systems consisting of a pre-shredder, knife granulator, material transport system, and Big-Bag collection station. MAIN ADVANTAGES: Powerful 45 kW drive Heavy-duty industrial construction 1,000 mm wide cutting rotor Large 1,034 × 540 mm cutting chamber Efficient V-type cutting system Replaceable screen for controlling the final material fraction Suitable for continuous industrial operation Can be integrated with shredders and complete recycling lines Possibility of pneumatic material transport to a Big-Bag station Professional technical support and spare parts availability Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts, including knives and screens. Full range of our knife granulators, shredders, and complete recycling systems: GrabTrade – shredding and recycling machines.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 3,000 kg, rotor diameter: 400 mm, number of blades: 10, total length: 1,120 mm, total height: 1,950 mm, control cabinet length: 500 mm, control cabinet width: 300 mm, control cabinet height: 1,500 mm, total width: 1,210 mm, rotor width: 600 mm, power: 22 kW (29.91 HP), type of input current: three-phase, sieve perforation: 6 mm, warranty duration: 12 months, input voltage: 400 V, inner dimension width: 590 mm, opening width: 400 mm, Equipment: CE marking, ZERMA GS 400/600 – High-Performance Granulator | Precision. Performance. Reliability. Experience the new ZERMA GS 400/600 high-performance granulator in action. Nodpfxozmhgio Afuewl The GS series was developed for the highest demands in plastic recycling and combines maximum performance with exceptional reliability and easy maintenance. Highlights ✔️ Rotor diameter: 400 mm ✔️ Rotor width: 600 mm ✔️ Proven ZERMA V-Cut technology ✔️ 5-knife rotor ✔️ 3 stator knives ✔️ Robust steel construction ✔️ Intelligent drop-down cutting system ✔️ External knife adjustment ✔️ Robust bearing outside the cutting chamber ✔️ Optional bypass hopper for long profiles and pipes ✔️ Designed for continuous industrial operation Typical applications * Packaging tapes (at 8 mm, 600 kg/h) * Runners and injection molded parts + start-up lumps up to 1 kg * Plastic profiles * Pipes * Sheets * Films * Blow molded parts * Engineering plastics * Production waste * Post-industrial recycling The GS 400/600 stands for precise shredding, high throughput, and long service life – the ideal solution for modern plastic processors and recycling companies.

Condition: new, Year of construction: 2026, The item for sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Nedpfx Aezlh Dfofuewl Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 94 pieces Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, with the option of mounting a second row of fixed knives (upper) depending on the waste being processed Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen, assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 09623212, Soundproof housing Motor power: 3 kW Dimensions of the grinding chamber: 220 x 170 mm Nedpfszimw Esx Afuowl Number of rotor blades: 3 Number of stator blades: 2 Rotor diameter: 170 mm Rotational speed: 270 rpm (at 50 Hz) Sieve hole diameter: 5 mm The mill is new and has never been used! PRICE REDUCED FROM 5950 TO 5350 EUR!!!