Smartus Zrt.

Year of construction: 1990, condition: used, Offered is a CNC lathe with a tool turret. Control: TRAUB SYSTEM TX-8-D, collet chuck, tailstock with center. Inspection possible by arrangement. Dwodpj Aiu Sbjfx Aared

Year of construction: 2012, condition: used, overall weight: 3,400 kg, total length: 3,500 mm, total width: 1,800 mm, total height: 1,000 mm, Turning length max.: 650 mm Spindle speed: 4500 - rpm Weight approx.: 3,400 kg Control: Heidenhain Manual Plus Dimensions (LxWxH) approx.: 3500 x 1800 x 1000 mm Year of construction: 2,012 Djdpfx Aas Aimnmsrewd Terms of payment: 100% prepayment before pick-up Terms of delivery: Loaded on truck under power: Yes

Year of construction: 1988, condition: used, A conventional center lathe is offered for sale. Turning length: 4000mm. Main spindle speed: 4.5-900rpm. Center height above flat bedway: 500mm. Swing diameter over bed: 1000mm. Swing diameter over cross slide: 760mm. Spindle bore: 104mm. Spindle nose: DIN 55027, size 11. Cross slide travel: 480mm. Top slide travel: 250mm. Tailstock quill diameter: 140mm. Quill travel: 315mm. Tailstock taper: MT6. Rapid traverse longitudinal/cross: 4200mm/min/2100mm/min. Maximum workpiece weight between centers: 5000kg. Maximum workpiece weight with one steady rest: 6000kg. Equipped with digital readout, three-jaw chuck, tool holder, tailstock with center, coolant supply and machine light. An additional steady rest is available. Inspection possible by arrangement. Dwedpo Aih Dvjfx Aarjd

Year of construction: 1994, condition: used, A CNC lathe with counter spindle including accessories is offered for sale. Spindle bore: Ø 32mm. Machine hours: approx. 47000. Control system: Siemens Sinumerik 820T. Equipped with a 16-station Sauter tool turret VDI20, Röhm KFD-HS 140/3 main spindle three-jaw chuck, Marquart Quadro NC collet chucking system, counter spindle collet holder 173E and Tebaron TEB/AH1 mist extraction unit. Accessories: approx. 85 VDI20 tool holders with blanking plugs, 173E collets from Ø 3-42mm, three new sets of soft jaws and additional jaws, optical tool measuring device and VDI20 turret alignment bar. The cutting tools shown are not included. Control modules defective. Inspection possible by arrangement. Dwodpfx Aas Aih Edjrod

Year of construction: 2005, operating hours: 26,000 h, condition: used, functionality: fully functional, machine/vehicle number: 1201180543, Wolf TSM 280 rotary transfer machine with curve control, including loading magazine. Used daily. The machine operates flawlessly in a single-shift operation – with low utilization. The machine has 8 processing stations and thus processes 8 parts simultaneously – similar to a “multi-spindle” machine. Dwedpj Aig A Iofx Aared The machine can be inspected at any time while in operation. Before collection, we will empty the operating fluids and disconnect the machine from the power supply. Dismantling and collection are the responsibility of the buyer. Used machine, sold without warranty, guarantee, or right of return.

Year of construction: 2016, condition: used, machine/vehicle number: 12-01, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Dwedpfx Aae Aid Ezsrsd The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Year of construction: 2008, condition: used, Equipment: workpiece handling system, sub-spindle, live tooling on both turrets, two turrets, the upper turret is equipped with an additional milling spindle. Rated current: 119A, max. upstream fuse rating: 125A, control voltage: 24V DC, connected load: 70kW, control system: Siemens 800D, operating hours: 92,329h, a machine retrofit is required before the machine can be put back into operation. An on-site inspection is possible. Dodpfx Ae Ah Tx Tearswd

Year of construction: 1994, condition: used, functionality: fully functional, Lathe, including chip tray and emulsion tank with pump, machine accessories: 315 mm chuck, rotating center for tailstock, technical documentation, technical parameters: distance between centers 2000 mm, swing over bed 500 mm, swing over carriage 250 mm, spindle bore 56 mm, maximum workpiece weight 1100 kg, spindle taper M 60, 1:20, tailstock center taper MORSE 5, spindle speed range 11.2-1400 rpm, power 2 x 5.5 kW, machine dimensions (wxd) 1180 x 4420 mm, weight 3260 kg, the machine can be tested by arrangement. Djdpfx Ae Ah S Aujarswd

Condition: good (used), Ref. -No.: 10673 Manufacturer: COLCHESTER Type: Magnum 1250 Type of control: Konventionell Storage location: Halberstadt Country of origin: England X stroke: 500 mm Y stroke: 400 mm Z - stroke: 400 mm Dwjdj Ah Dfijpfx Aarjd Feed rate: 5.000 mm / min Tool places: 16 Weight Of The Machine Ca.: 3.000 t Further information: The machine is offered including all available accessories and technical documentation. The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Year of construction: 2006, condition: used, Center height: 1132mm, max. machining diameter: 16mm, max. turning length without reclamping: 200mm, spindle bore: 20mm, main spindle speed: 10,000rpm, main spindle positioning accuracy: 0.001°, main spindle drive power: 2.2kW, max. sub-spindle machining diameter: 16mm, sub-spindle speed: 10,000rpm, sub-spindle positioning accuracy: 0.001°, sub-spindle drive power: 0.75kW, driven tools on vertical tool holder, speed: 8,000rpm, drive power: 0.75kW, number of tools: 4, driven tools on turret, speed: 6,500rpm, drive power: 0.75kW, number of stations: 10, number of tools: 5, clamping sleeve diameter: 19.05mm, turning tool shank cross-section: 10mm, main/sub-spindle collets: F20 (138E), drilling collets: ER 11, rapid traverse speed on all axes: 20m/min, connected load: 6kVA, control system: Mitsubishi Meldas 635, length: 2450mm, width: 1170mm, height: 1700mm, weight: 2.55t, including FMB Minimag 18/3200 C bar feeder, machine is fully functional, no known technical defects. An on-site inspection is possible. Dsdpfx Ao Ahq N Iearowd

Year of construction: 2003, condition: used, Max. bar capacity: 13mm, max. turning length: 130mm, connected load: 18kW, control system: TRAUB SYSTEM TX8i-s, including FMB Minimag 3200 bar feeder. Machine is fully functional, no known technical defects. An on-site inspection is possible. Dedj Ahq Raepfx Aarjwd

Year of construction: 2010, condition: good (used), Ref. -No.: 10322 Manufacturer: EKO PILL Type: PMPO 950 K Year of construction: 2010 Further information: The PMO 950K carousel jet washer is revolutionary maintenance-free washer, extremely compact and aesthetic structure, designed for oil contamination, machining emulsions and loose chips from washed objects. Despite its minimized dimensions, it works perfectly together with automated production lines for thorough washing, and optional rinsing and drying of moving parts on the internal conveyor. Short distance between station Loading and unloading facilities make it flexible. Washing, rinsing as well as drying operations take place Dwedj Ahmulepfx Aarsd in closed circuits, which significantly reduces costs - Gravity oil separator OGP - Fine filter EKO-PIL 20 µm - Vapor condenser with liquid regeneration - Drying heat recovery - Washing - Rinsing / Maintenance - Drying

Condition: used, A conventional center lathe is offered. Equipped with manual gear and feed selection, saddle, cross slide and compound slide, tool holder, tailstock with handwheel, rear splash guard, machine light and machine stand with chip pan. Inspection possible by arrangement. Dsdpo Ahi Sxjfx Aarjwd

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 96101805, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 96101805 Control system: Siemens Sinumerik Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 220 V Connected power: 105 kW Rated current: 200 A Spindle and Machining Area Diameter of rotation over the bed: max. 185 mm Dwjdo Ahg D Topfx Aarjd Diameter of rotation over the compound slide: max. 185 mm Spindle bore: 205 mm Number of bed slides: 2 Number of compound slides: 2 Longitudinal travel: 800 / 2,000 mm Cross travel: 320 mm Tailstock Arbor taper: MK 5 Arbor diameter: 110 mm Manual tailstock travel: max. 300 mm Transport Transport: possible on a standard truck EQUIPMENT Chip conveyor Coolant system Loading system Large quantity of VDI tool holders VDI tool holders, some equipped with cutting tools Documentation

Year of construction: 1997, condition: used, X-axis travel: 220mm, Z-axis travel: 635mm, swing diameter over bedway cover: 570mm, swing diameter over cross-slide cover: 420mm, main spindle nose diameter: 170mm h5, main spindle diameter at front bearing: 120mm, main spindle bore: 79mm, drive power at 100% duty cycle: 21kW, max. torque: 240Nm, spindle speed range: 25-5,000rpm, C-axis speed: 100rpm, holding torque: 200Nm, counter spindle nose diameter: 120mm h5, counter spindle diameter at front bearing: 90mm, spindle bore: 56mm, chuck diameter: 140mm, drive power at 100% duty cycle: 9kW, max. torque: 72Nm, spindle speed range: 25-5,000rpm, travel: 575mm, rapid traverse speed: 24m/min, Z-axis feed force: 7kN, X-axis feed force: 3.5kN, X-axis rapid traverse speed: 20m/min, Z-axis rapid traverse speed: 24m/min, X/Z ball screw dimensions: 32x10mm, length: 3565mm, width: 1700mm, height: 1700mm, weight: 4.7t, operating hours: 79,630h, the machine is currently not operational due to damage to the tool turret, an on-site inspection is possible. Dwedps Agwqtjfx Aarjd

Year of construction: 2008, condition: used, Offered is a CNC turning center with automated robot loading. Workpiece feeding: Ball blanks under 120mm via rod chute, larger ball blanks via a separate singulation system at the CNC machine. Operating hours: approx. 68000h. Control system: FANUC 31i-A. Robot controller: FANUC R-30iA. Equipped with: Main spindle and counter spindle, tool turret, FANUC M-16iB 6-axis industrial robot, automated workpiece feeding, raw part hopper, rod chute for ball blanks under 120mm, separate workpiece singulation system for larger ball blanks, chip conveyor, protective enclosure for the robot cell as well as electrical documentation and circuit diagrams. Repairs carried out: 2025: New feed screw with bearing, 2021: New vacuum pump on the cooling unit, 2018: New CPU for the FANUC robot. Inspection possible by arrangement. Dsdpfxj Agwrmj Aarjwd

Year of construction: 2017, condition: excellent (used), Year of manufacture: 2017 Maximum machining diameter: 42 mm Maximum turning length: 300 mm Control system: FANUC Series 32i-Model B Bar feeder: BARLOAD Vito (left) Serial number: 22171258 Dodpfx Aas Agvl Njrowd Weight: 980 kg Filtration unit: included Conveyor belt: right Chip conveyor: included Tools: not included

Year of construction: 2017, condition: excellent (used), Number of axes: 8 Maximum machining diameter: 42 mm Maximum turning length: 300 mm Control system: FANUC Series 32i-Model B Djdpfx As Agvlzjarowd Bar feeder: BARLOAD Vito (left) Year of manufacture: 2017 Serial number: 22171425 Equipment: chip conveyor, chip transporter, filter, cooling unit Oil cooler: HABOR Tools: not included

Year of construction: 2018, condition: excellent (used), Manufacturer: WIVIA Dsdpfxs Agvlps Aarewd Model: W428 Year of manufacture: 01/2018 Serial number: 01163 Number of axes: 8 Maximum turning diameter: 42 mm Maximum turning length: 300 mm Control system: FANUC Series 32i-Model B Bar feeder: BARLOAD Vito (left) Conveyor belt: Yes Chip conveyor: Yes Filtration system: Yes Cooling unit: Yes Oil cooler: HABOR Tools: None

Year of construction: 1980, condition: used, Equipment: tailstock with handwheel, compound slide, cross slide, longitudinal carriage with apron, machine light, integrated machine stand, tool holder. Inspection possible by appointment. Dwodj Afza Ropfx Aarod

Year of construction: 2019, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 350 mm, travel distance Z-axis: 1,310 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828 D, bed width: 350 mm, center height: 270 mm, rotational speed (max.): 1,500 rpm, rotational speed (min.): 20 rpm, spindle bore: 105 mm, machine/vehicle number: T0119010008, TURI SPANTEC RIC-TC 2160 CNC flatbed lathe - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Swing diameter over bed: 540 mm - Swing diameter over cross slide: 310 mm - Distance between centers: 1500 mm - Tailstock diameter: 75 mm - Tailstock travel: 170 mm - MT 5 Dwjdpfxe Afuq Ns Aared The machine is equipped with a tailstock, a double Multifix tool holder, a three-jaw chuck, diameter: 250 mm, another three-jaw chuck with a diameter of: 315 mm, various tool holders and clamping jaws, as well as a chip conveyor and chip cart. FCA D-94227 Zwiesel - loaded onto a truck.

Year of construction: 1977, condition: used, Offered is a conventional center lathe with lead screw and feed rod. Thread cutting: metric and imperial threads. Speed and feed selection: mechanically via gearbox. Workpiece clamping: three-jaw chuck. Tool holder: four-way tool post. Equipped with longitudinal and cross slides, tailstock with quill, lead screw and feed rod, digital position readout and work light. Inspection possible by arrangement. Dsdpj Afplujfx Aarjwd

Condition: used, Offered is a conventional shaft lathe with tailstock. Swing over bed: 630mm. Swing over cross slide: 360mm. Center height above bed: 286mm. Spindle bore: 60mm. Spindle diameter at front bearing: 140mm. Number of spindle speeds: 30. Number of longitudinal feed steps: 41. Number of cross feed steps: 41. Longitudinal feed: 0.064-6mm/rev. Cross feed: 0.025-2.32mm/rev. Maximum workpiece weight according to manufacturer: 6000kg. Metric thread pitches: 0.219-48mm. Equipped with a large chuck, tailstock, four-way tool post, longitudinal and cross slides, as well as mechanical control levers and handwheels. Inspection possible by arrangement. Dedpfs Afpk Rjx Aarewd

Condition: used, Offered 250mm. Feed steps: 12. Cross-bed feed: 0.05-3mm/rev. Carriage and rotating section feed: 0.04-2.5mm/rev. Feed motor speed: 1000rpm. Feed motor power: 2.2kW. Permissible workpiece weight, cantilevered with a center of gravity distance of 300mm: approx. 5000kg. Permissible workpiece weight between centers, without additional support: 20000kg. Equipped with a large faceplate with clamping devices, cross-bed support, movable tool slide and mechanical lever controls. Inspection possible by arrangement. Dsdpo Afpkqofx Aarjwd

Condition: used, Offered is a facing lathe with a large faceplate. Swing diameter over foundation plates: 2480mm. Center height above foundation plates: 1250mm. Faceplate diameter: 1600mm. Maximum faceplate torque: 14000Nm. Main spindle bore: 100mm. Front main spindle bearing diameter: 240mm. Turning tool shank cross-section: 50 × 50mm. Equipped with four chuck jaws, movable bed-mounted carriage, cross slide, tool holder, mechanical control levers and handwheels. Dwedpo Afplhsfx Aarod