MazMac Limited

Condition: used, Year of construction: 2017, Technical details: turning diameter: 340 mm turning length: 1000 mm control: OSP 300 LA swing diameter over cross slide guide: 470 mm swing diameter max. over bed cover: 580 mm travel -x axis: 260 mm travel -z axis: 1065 mm rapid travel - longitudinal/face: 30 / 25 m/min bar material dia.: 52 mm spindle diameter: 80 mm Spindle RPM: 5000 1/min spindle drive: 22 / 15 kW turret stations / rotary tool stations: 12/12 VDI 40 : 7 kW speed of driven tools: 6000 1/min Tailstock Travel: 1015 mm tailstock quill taper MT: 5 total power requirement: 38,7 kVA weight of the machine ca.: 6500 kg dimensions of the machine ca.: 4 x 2,5 x 2 m Accerories Delszb Rh Hehccqlskn Chip conveyor Signal lamp 2 colors manual tool eye High precision Turning and Milling Centre with turret for milling tools and main spindle with C- axis. The Stiefelmayer mandrel for inside clamping of hollow shafts can b e replaced by regular 250 mm Kitagawa chuck. Machine can be shown undeer power *

Condition: used, Year of construction: 2007, turning diameter max. 356 mm turning length 705 mm control MSX 850 III MAPPS Mitsubishi greates pass round over bed 923,8 mm Swing dia. over traverse guideway 755 mm standard turning dia. 275 mm max. spindle speed 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm max. bar capacity 80 mm chucking diameter 305 mm C-Axis 0,001 ° Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm chucking diameter 210 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Dkjlhccjzb N Uxoqlen Shank diameter 26 mm Drill shank diameter 50 mm Spindle speed - driven tool stations max. 6.000 min -1 turret change time 0,25 sec. x-axis 260 mm z-axis 795 mm b-axis 734 mm feed speeds max. 30.000 mm/min rapid traverse X/Z/B: 30 m/min rapid traverse C: 400 min/-1 total power requirement 39 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NL 2500 SMC / 700 - Tool-Drive - C-Axis - Subspindle

Condition: used, Year of construction: 2008, turning diameter max. 420 mm turning length 713 mm control MSX 850 III MAPPS Mitsubishi swing over bed 995 mm Swing dia. over traverse guideway 825 mm max. turning diameter 420 mm max. bar capacity 90 mm turning speed range - main spindle max. 3.000 min/-1 power capacity - main spindel 30 / 25 kW spindle nose JIS A2-8 spindle bearing diameter 160 mm spindle bore 105 mm max. bar capacity 90 mm C-Axis 0,001 ° x-axis 280 mm z-axis 820 mm Tooling 12 Pos. Schank height for square tool 25 mm Diameter of boring bar 50 mm turret change time 0,3 sec. Spindle speed - driven tool stations max. 6.000 min -1 power capacity driven tool-stations 5,5 / 3,7 kW rapid traverse X-axis 30 m/min rapid traverse Z-axis 30 m/min rapid traverse C-axis 300 min/-1 tailstock 734 mm diameter of quill 110 mm taper of center MK 5 total power requirement 46 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 3,0 x 2,5 m CNC - Turning- and Milling Center MORI SEIKI - NL 3000 MC / 700 Dolszb N Ulohccqlekn - Operating time: approx. 9,595 hours - Processing time: approx. 7,552 hours

Condition: used, Year of construction: 2014, functionality: fully functional, Turning diameter 419 mm Turning length 406 mm Travel in X-axis 200 mm Travel in Z-axis 406 mm Control system: HAAS Delhcezb H Iiscqljkn Number of tool positions: 12 Spindle bore: 58.7 mm Spindle speed range: 6,000 rpm Rapid traverse rate X and Z: 30.5 m/min Max. spindle power: 11.2 kW Bar diameter: 44 mm Includes tool holders on the turret Includes tailstock, chip conveyor, and oil mist extraction system Recorded machine operating time: 12,970 hours

Condition: used, Year of construction: 2015, Technical details: turning diameter: 340 mm turning length: 1000 mm control: OSP 300 LA swing diameter over cross slide guide: 470 mm swing diameter max. over bed cover: 580 mm travel -x axis: 260 mm travel -z axis: 1065 mm rapid travel - longitudinal/face: 30 / 25 m/min bar material dia.: 52 mm spindle diameter: 80 mm Spindle RPM: 5000 1/min spindle drive: 22 / 15 kW Dkolhccqjzbzv Ijljn turret stations / rotary tool stations: 12/12 VDI 40 : 7 kW speed of driven tools: 6000 1/min Tailstock Travel: 1015 mm tailstock quill taper MT: 5 total power requirement: 38,7 kVA weight of the machine ca.: 6500 kg dimensions of the machine ca.: 4 x 2,5 x 2 m Accerories Chip conveyor Signal lamp 2 colors manual tool eye High precision Turning and Milling Centre with turret for milling tools and main spindle with C- axis. There are 4 machines available with Robot loading and one machine without Robot. The Stiefelmayer mandrel for inside clamping of hollow shafts can b e replaced by regular 250 mm Kitagawa chuck. Machines can be shown undeer power *

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 580 mm, turning diameter: 350 mm, spindle motor power: 15,000 W, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 76 mm, overall weight: 4,000 kg, FOR SALE: Goodway GA-2600 CNC Lathe Are you looking for a reliable and efficient CNC lathe for your workshop? We are offering a Goodway GA-2600 in good working condition, equipped with a dependable Fanuc control system. This machine provides a compact yet capable setup for precise turning operations. Dslhccqozbx R Aslekn The machine is available from stock. General Specifications Manufacturer: Goodway Model: GA-2600 CNC control: Fanuc Availability: From stock ### Key Technical Characteristics Maximum turning diameter: 350 mm Maximum turning length: 600 mm Diameter over the bed: 580 mm Diameter over cross slide: 400 mm Spindle speed: 4000 rpm Spindle motor power: 15 kW Spindle bore: 76 mm X-axis travel: 205 mm Z-axis travel: 630 mm Number of tool positions: 10 Tailstock: No Bar feeder: No Contact us today to request a quote! The machine is ready for immediate shipment. (All information is provided in good faith, but we reserve the right to make errors).

Condition: used, Year of construction: 2009, Mazak Quick Turn Nexus 300 CNC Slant Bed Lathe With Mazatrol 640T Nexus Control Dkelhccjzbr Emeqlen Kitagawa B-212 Ø305mm 3 Jaw Power Chuck. Maximum Turning Ø419mm. Maximum Swing Ø650mm. Maximum Swing Over Cross Slide Ø419mm. Distance Between Centres 630mm. Bar Working Capacity Ø77mm. Spindle Bore 88mm. Axis Travel 'X'=225mm, 'Z'=680mm. Rapid Traverse 'X'=30m/min, 'Y'=30m/min. Maximum Spindle Speed 4,000rpm (30HP Motor).12 Position Turret. S/No. 180105 (2009). With Coolant System, Chip Conveyor, Tailstock, Signal Tower & Tool Setting Arm. Weight 6,600kg.

Condition: excellent (used), Year of construction: 2021, Twin-spindle version With milling head with C-axis with Y-axis with driven tools FANUC Series 31i Model 5 control Turning diameter - 540 mm Turning length - 1040 mm Y-axis travel 170 mm (+/- 85) Spindle taper ASA A2-6 Spindle speeds 5,000 rpm each C-axis indexing 0.001° Milling head B-axis 240° Indexing 0.001° Spindle speed 12,000 rpm Turret with 12 driven positions Tool magazine with 80 positions Dkjljzbr Alohccqljn Part pick-up device Tool measuring system LNS Sprint 565 S2 bar feeder Misc. accessories MARCELS MASCHINEN CH

Condition: not inspected (used), Year of construction: 2001, operating hours: 31,782 h, functionality: unexamined, overall weight: 5,500 kg, Without tools Dslhcjzbqg Njcqlokn

Condition: excellent (used), Year of construction: 2014, Haas ST25Y Year of manufacture: 2014 Haas control system RPM: 3500 Chuck diameter: 254mm Complete with: - chip conveyor - coolant system Delhccjzbmkqsqlskn - tailstock - tool holders

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 810 mm, number of axes: 8, This 8-axis MORI SEIKI NZ-2000/T2/Y2 was manufactured in 2008. It features a twin-spindle design with a maximum Z-axis travel of 810 mm and X-axis travel of 210 mm. The machine is equipped with two turrets, each with 16 stations, suitable for complex multi-process turning and milling operations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NZ-2000/T2/Y2 turn-mill centre we have for sale. Contact us for further details. • Control/NC • Control unit: MORI SEIKI MSX-701 • NC system: FANUC FS-31iA (MAPPS 3); MAPPS version: 3 • Software/features: Load monitor; Tool life management; Number of stored programs: 250; User memory: 50 MB; Tool offset pairs: 99; Custom macro variables: 600 • Languages: NC and MAPPS screens in Italian • Electricals/destination • Voltage: 380–480 V; Frequency: 50 Hz; Destination: Europe • Machine configuration • Bed length: 800 mm • C-axis on both spindles • 2 turrets with X-Y-Z axes • Both turrets originally equipped with live tooling • Lower turret live tooling currently NOT working (turning functions OK) • Suitable for complex multi-process turning and milling • Spindles • Main spindle (Spindle 1) • Through-hole diameter: 73 mm • Chuck type: Hollow chuck 8"; Chuck through-hole: 65 mm; Chuck manufacturer: KITAGAWA • C-axis: Included; Spindle orientation: Included (without lock); C-axis brake: Included • Sub spindle (Spindle 2) • Power: 25/22 kW; Speed: 5,000 rpm • Through-hole diameter: 73 mm • Chuck type: Hollow chuck 8"; Chuck through-hole: 65 mm; Chuck manufacturer: KITAGAWA • C-axis: Included; Spindle orientation: Included (without lock); C-axis brake: Included • Axis travels • B: 810 mm • Max. distance between spindle noses: 1,130 mm • Turrets • Turret 1: Axes X-Y-Z; 16 stations; Milling function included; Rotary tool speed: 6,000 rpm; Tool mounting: By bolts • Turret 2: Axes X-Y-Z; 16 stations; Milling function present but NOT working; Rotary tool speed: 6,000 rpm; Tool mounting: By bolts • Backward tool max lengths: 155 mm (upper turret), 100 mm (lower turret) • Tool presetting • Spindle 1 in-machine tool presetter: Manual (detachable) • Spindle 2 in-machine tool presetter: Manual (detachable) • Coolant/chip (machine-integrated) • High-pressure coolant system: 635 W / 1040 W • Coolant type: Water-soluble • Through-spindle air blow: Included • Chip disposal direction: Right • Interfaces • Bar feeder interface: Included (Multiple-bar feeder specification; LNS) • Robot interface: Included • Languages/documentation • Manuals: Italian • Documentation: Installation, Operation, Maintenance manuals; Declaration of Conformity; CE Certificate • Important note • Lower turret motorized tooling function faulty on both machines. T2 turret currently usable only for turning operations. Additional equipment • Automation/handling • RR Robotica loading portal (included) • Loading pallets (included) • Work loader (Spindle 2 side) • Workpiece ejector • Work unloading conveyor • Part receiver • Custom upper door hatch for portal loading/unloading (non-original) • Chip/coolant peripherals • Drag-type chip conveyor • Coolant tank with washing pumps • Additional non-original 20 bar high-pressure pump • Workholding and tooling • Main spindle and sub spindle chucks included (KITAGAWA 8" hollow) • Fixed tool holders: 8 total (4 upper + 4 lower) • Driven tool holders: 2 axial, 2 radial • Electrical/other Dkolhccezbkh Toqljn • External machine transformer • Signal light tower: 3-tier (red / milky white / green)

Condition: like new (used), Year of construction: 2018, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 673 mm, turning diameter: 313 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 75 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 2,123 mm, total length: 3,257 mm, total width: 2,312 mm, spindle nose: 6, overall weight: 8,118 kg, spindle diameter: 250 mm, CNC Fanuc 31i TURNING SWING DIAMETER Over guide cover: 673 mm Dkelhszbicvjccqljn WORKING AREA Chuck size: 250 mm Bar capacity: 65 mm Maximum turning diameter: 313,7 mm Maximum turning length: 520,7 mm MAIN SPINDLE Maximum spindle speed: 4.000 rpm Maximum motor power: 26 kW Maximum torque: 421 Nm Base spindle speed: 590 rpm Spindle nose: A2-6 / 25C Spindle bore: 75 mm Maximum 3-jaw chuck size: 250 mm Spindle orientation: 1° SUB-SPINDLE Maximum spindle speed: 5.000 rpm Maximum torque: 347 Nm Base spindle speed: 420 rpm Maximum motor power: 11 kW Spindle nose: A2-6 / 20C Chuck size: 200 mm Bar capacity: 51 mm Spindle bore: 60,4 mm Spindle orientation: 1° Maximum stroke: 638 mm Maximum rapid traverse: 38 m/min Maximum distance between sub-spindle and main spindle: 654,1 mm COOLANT SYSTEM Tank capacity: 254 L Maximum pressure: 13,8 bar High-pressure coolant through turret: 68,95 bar ADDITIONAL FEATURES Resolution: 0,0001 mm Machine length: 3.257 mm Machine depth: 2.312.4 mm Machine height: 2.123 mm Machine weight: 8.118 kg Machine equipped with: • SUPER-PRECISION® certification • Air blast on main spindle • 20C collet spindle • Custom Macro B programming • Reinforced HARCRETE® machine base • Grease lubrication on all axes • Optical scales on X, Y and Z axes • 12-bar through-tool coolant system • Parts counter and operating hours counter • Axis resolution: 0.00010 mm • Maintenance kit • Manual Guide i (programming system) • Rigid tapping (without compensation holder) • Laser measurement system with Renishaw ball probe • Live tooling, Y-axis and 20C sub-spindle option Configuration includes: • Sub-spindle • 12-station BMT-55 tool turret with live tooling drive • C-axis on both main spindle and sub-spindle • Y-axis • Optical scale on Y-axis • Ready To Cut option (Warm-up Cycle – Automatic Start) • MARPOSS workpiece probe for BMT-55 • MARPOSS tool setter • Workpiece presence detection in the sub-spindle • Chip conveyor – discharge on the right-hand side of the machine (interface included) • High-pressure coolant system • Spindle reduction sleeve kit • Operating and maintenance manuals and CE Declaration of Conformity

Condition: excellent (used), Year of construction: 2012, operating hours: 14,901 h, functionality: fully functional, DMG MORI / GILDEMEISTER CTX beta 1250 TC 4A CNC turning/milling center DMG CTX beta 1250 TC 4A, manufactured in 2012. The machine is equipped with a Siemens 840D / ShopTurn 3G control system and features a main and counter spindle, B-axis, Y-axis, upper milling spindle, and a lower turret. Current operating hours are approximately 14,901 hours, and current spindle hours are approximately 5,000 hours. The machine is still connected to the utilities and can be inspected by appointment. Dkelhccqszbg Txoljn Condition: Exceptionally Good / Superbly Maintained Technical Specifications Process: Turning / Milling / Complete Machining Machine Type: CTX beta 1250 TC 4A Year of Manufacture: 2012 Weight: approx. 16,000 kg Power: 85 kVA Control System: Siemens 840D / ShopTurn 3G Main Spindle / Counter Spindle: 1 x FNC 250 each, up to 5,000 rpm Main Spindle: Hainbuch SpannTop nova Modular 80 HS Internal Clamping Device: Diameter 77 mm GS Partial Internal Clamping Device: Diameter 67 mm x 700 mm Coolant System Pressure: 8 / 20 / 40 / 80 bar Short Bar Loader Magazine: IRCO ILS-RBK 100/16 Upper Milling Spindle: HSK-63A, 24-position disc magazine Travel Ranges Upper Unit: B-axis +/-110 degrees, Y-axis +/-100 mm, X-axis 450 mm, Z-axis 1,200 mm Lower Turret: VDI 40, 12 tool positions, X-axis 195 mm, Z-axis 1,200 mm Additional: Turret collet chuck SMW SLU-X-2-ZS 8-101 mm Footprint: approx. 9,200 x 2,600 mm including exhaust filter system, chip conveyor, and bar storage Video recordings + extensive photo collection available upon request via WhatsApp.

Condition: used, Year of construction: 2023, Key Technical Specifications - Brand / Model: DN Solutions (formerly Doosan) PUMA GT3100L - Year of Manufacture: May 2023 - Serial Number: ML0313-000510 - Power Supply: AC 380V – 3 Phases – 50/60 Hz - Nominal Capacity: 36.11 kVA (Full Load Current: 54.87 A) - Machine Weight: 6,900 kg (Maximum rigidity and stability) - Compliance: CE Certified What is this machine used for? Dolhccqjzbb Ikolokn The PUMA GT3100L is a heavy-duty, computer-numerical-control (CNC) horizontal turning center engineered for intensive machining of medium-to-large components. It excels at high-precision turning, facing, threading, and boring of high-value parts. This is the ideal production tool for demanding industrial sectors such as automotive, energy (oil & gas), hydraulics, and heavy precision mechanical engineering. How does it stand out from other models? - "L" (Long Bed) Configuration: Unlike standard compact variants, this long-bed version offers an extended turning length, allowing you to process long shafts and oversized workpieces without sacrificing structural rigidity. - Ultra-Robust 6.9-Ton Frame: Its massive cast-iron bed perfectly dampens vibration. This guarantees flawless geometric accuracy and significantly extends tool life, even during aggressive roughing cuts on hard alloys. - 2023 DN Solutions Generation: Benefiting from the manufacturer's recent rebranding and latest technological advances (formerly Doosan Machine Tools), this machine integrates modern electronics and high-efficiency motors (36.11 kVA), delivering an exceptional balance between high torque and energy efficiency.

Condition: used, Year of construction: 2000, operating hours: 74,325 h, functionality: fully functional, machine/vehicle number: 99950000501, turning length: 800 mm, turning diameter over cross slide: 200 mm, turning diameter: 240 mm, spindle motor power: 28 W, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 79 mm, travel distance X-axis: 190 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 555 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 7 m/min, rapid traverse Z-axis: 30 m/min, bar diameter (max.): 65 mm, Can be inspected under power, Siemens 840C control system. Dkelhozbbmgjccqlsn

Condition: good (used), Year of construction: 2005, Turning diameter: max. 500 mm Turning length: 550 mm Spindle bore: 65 mm Dkjlhcozbaq Djcqlon Spindle speed: 5000 rpm including bar feeder

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 126265, turning length: 900 mm, turning diameter over cross slide: 450 mm, turning diameter: 450 mm, spindle motor power: 22 W, spindle speed (min.): 38 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 100 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 935 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 6,000 rpm, feed length X-axis: 580 mm, feed length Y-axis: 160 mm, feed length Z-axis: 935 mm, bar passage: 72 mm, total height: 2,600 mm, total length: 4,945 mm, total width: 2,690 mm, spindle nose: A2-6, swing diameter over bed slide: 630 mm, overall weight: 10,300 kg, spindle diameter: 100 mm, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in very good working condition and can be inspected under Power. Control system OSP-P200L Spindle taper in live spindle HSKA63, 15Kw Sub spindle, B axes, tool magazine with 40 places, aprox 60 HSK 63 toolholder. half pallet with hard and soft jaws, Collets. Dkelhcsza U Ubocqljn

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 475 mm, turning length: 1,000 mm, turning diameter: 475 mm, spindle bore: 72 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 1,033 mm, total height: 2,150 mm, total length: 4,950 mm, total width: 2,100 mm, turning diameter over bed slide: 475 mm, overall weight: 7,400 kg, bar passage: 72 mm, chuck outer diameter: 300 mm, We are offering this very well-maintained Mazak Quick Turn 40 CNC turning and milling center, manufactured in 2005. First owner. Used only for single-piece production. DIN ISO programming possible. 1 chip conveyor. The machine still turns with an accuracy of 0.01 mm. Various end stops. Traveling center. 1 tool cabinet. Various clamping jaws. Tool holders. Dkslhccqsza Hxlolon Sleeves. Tools. Various traveling center cones. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, turning length: 507 mm, turning diameter over cross slide: 300 mm, turning diameter: 531 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 51 mm, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length Y-axis: 180 mm, feed length Z-axis: 575 mm, torque: 18 Nm, bar passage: 51 mm, total height: 2,000 mm, total length: 4,000 mm, chuck outer diameter: 200 mm, total width: 2,000 mm, quill stroke: 130 mm, quill diameter: 80 mm, quill travel distance: 400 mm, swing diameter over bed slide: 300 mm, overall weight: 4,300 kg, swing diameter over top slide: 275 mm, spindle diameter: 51 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this very well-maintained Mazak SQT-15M CNC turning and milling center, manufactured in 1991. DIN ISO programming First owner 1x New flat belt in 04/2026 Chip conveyor Chip removal system 4x Driven tools Various holders on the tool turret 1x Tool cabinet with ample Turning chucks Following centers Turning tools Collets Drills, etc. Model: SQT-15M Serial number: 98637 Date of manufacture: 9-1991 Weight: 4300 kg If you have any questions or require further information, please feel free to send us a message or call us. Dslhcceza E Ufsqlekn

Condition: good (used), Year of construction: 2012, maximum machining diameter 380mm, maximum machining length 508mm, bar capacity 74mm, spindle speed 4,000rpm, spindle power 18.5Kw, milling speed 4,500rpm, milling power10Kw, Delhccqezaz Uzjlokn sub-spindle speed 6,000rpm, sub-spindle power 5.5Kw, Y axis -51/+51mm, 12 station turret, Mazatrol Matrix Nexus control, swarf conveyor, parts catcher , tool setter, 3 jaw chuck and Barfeed unit.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Purchase price EUR 1.550.000 Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Turning, drilling, milling head Front diameter: Bearing 110mm Interface HSK100/C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Delhozaz Egsccqljkn Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: excellent (used), Year of construction: 2013, operating hours: 5,785 h, Okuma Genos L300e-MY turning center Year: 2013 Technical details: Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3000 1/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Minimum indexing C-Axis main Spindle 0,001 ° Number of tools on turret 12 Spindle speed driven tools 45 - 4500 1/min Number of driven tools 12 position Tool Taper VDI40 Spindle motor driven tools 7/3,3 kW Bar feeder SPACESAVER 2210 ( 1500 mm bar lenght, up to 67 mm diameter ) Machine dimensions 4370x2540x2490 mm Weight 7500 kg Accessories/options: - SPACESAVER 2210 barfeeder - swarf conveyor - parts cather - Renishaw tool measuring arm Dkolhccjzat Tvoqlon - Driven tool holders - Static tool holders - Hydraulic chuck - Jaws for chuck - Documentations - Dust extractor

Condition: ready for operation (used), Year of construction: 2013, spindle motor power: 38,000 W, spindle speed (max.): 3,000 rpm, travel distance X-axis: 515 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,280 mm, total height: 2,574 mm, total width: 2,274 mm, overall weight: 9,000 kg, product length (max.): 5,890 mm, number of axes: 5, This 5-axis Biglia Smart Turn B1200S was manufactured in 2013. It features a maximum turning diameter of 500 mm and a turning length of 1,280 mm. The machine is equipped with a main spindle that reaches speeds of up to 3,000 rpm and a sub-spindle with a maximum speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Biglia Smart Turn B1200S turn-mill centre we have for sale. Contact us for further details. • Maximum rotation diameter: 750 mm • Maximum turning diameter: 500 mm • Maximum turning length: 1,280 mm • Main spindle nose: DIN 55026 8" Dkjlhjzar Ixsccqljn • Main spindle bar capacity: 95 mm • Main spindle motor power: 30 / 38 kW • Main spindle maximum torque: 1,014 Nm • Main spindle chuck: SMW Autoblok 250 BB (250 mm diameter) • Sub-spindle maximum speed: 4,000 rpm • Sub-spindle nose: ASA 6" • Sub-spindle motor power: 30 / 40 kW • Sub-spindle maximum torque: 286 Nm • Sub-spindle W-axis travel: 1,130 mm • Sub-spindle chuck: 250 mm diameter • B-axis milling unit rotation range: 210° (±105°) • B-axis angular positioning accuracy: 0.001° • Milling spindle taper: HSK-A63 • Milling spindle maximum speed: 50–8,000 rpm • Tool magazine capacity: 40 stations • Footprint dimensions: 5,890 × 2,274 × 2,574 mm (H), including chip conveyor Additional equipment • Chip conveyor • Parts unloader arm with front conveyor belt • Tool setter probe Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 196 mm, turning diameter over cross slide: 130 mm, spindle speed (min.): 6,000 rpm, bar diameter (max.): 36 mm, overall weight: 1,900 kg, Equipment: documentation/manual, Yamazaki Mazak QT-6T CNC Turning Center – Excellent Condition We offer for sale a well-maintained Yamazaki Mazak QT-6T CNC Turning Center, manufactured in Japan and kept in excellent mechanical and operational condition. The machine is currently under power, in production, and available for inspection and testing upon appointment. Machine Information - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - CNC Control: Mazatrol - Configuration: 2-Axis CNC Turning Center (X / Z) - Machine Weight: Approx. 1,900 kg Main Features - 6" Chuck - Collet Chuck - Complete Set of Collets Included - Bar Capacity up to 36 mm - 8-Station Turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant System - Fully Operational Included Equipment - Fedek Bar Feeder - Bar Feeder Length: 1.5 m - Pneumatic Bar Pushing System - 6" Chuck - Collet Chuck - Complete Set of Collets - Full Set of Tool Holders - Original Manuals and Documentation - Various Accessories Additional Equipment Included The machine is supplied with the complete set of spindle protection plastic tubes (bar guide tubes), allowing safe operation with bar stock and minimizing vibration, noise, and bar whipping during spindle rotation. This contributes significantly to machining stability, surface finish quality, and spindle protection when running long bars. Technical Specifications - Maximum Turning Diameter: Approx. 130 mm - Maximum Turning Length: Approx. 196 mm - Spindle Bore: Approx. 45 mm - Maximum Spindle Speed: Up to 7,000 rpm - Bar Capacity: 32–36 mm - X-Axis Travel: Approx. 80 mm - Z-Axis Travel: Approx. 200 mm - Rapid Traverse X/Z: Up to 30 m/min Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ Machine under power ✔ Ready for immediate production ✔ Inspection and test run possible ✔ All manuals and documentation available Additional Information This machine is offered as a complete production package and is ideal for precision machining of bar stock, small and medium batch production, and high-accuracy turning applications. The machine comes with extensive tooling, collets, holders, automatic tool setting, automatic parts catcher, bar feeder, and spindle guide tube system, allowing immediate integration into production with minimal additional investment. Loading assistance is available. Dkjlhccjzal Rasqlen Videos of the machine running can be provided upon request.

Condition: like new (used), Year of construction: 2005, Hardinge Quest 51 SP CNC lathe Super precision 2 axes Year: 2005 Control: FANUC Model: 21i-T Spindle speed range: 50–4200 rpm Spindle motor power: 15 kW Dsljzak Ecehccqljkn X-axis travel: 189 mm Workpiece diameter above the bed: 520 mm Maximum turning diameter: 356 mm Through-hole bar capacity (round collet): 51 mm, spindle bore 60 mm Distance between centers (Z-axis travel): 610 mm Tool turret: 12 positions Square tool shank, max. 25 mm Tool diameter, max. 40 mm Tool change time (from station to station): 0.35 s Machine dimensions: width x depth x height: 1950 x 3860 x 1905 mm Machine weight: 5550 kg Accessories/options: - tool holders - chip conveyor - documentation Connected and available for inspection under power in our warehouse!