Used Cad for sale (854)

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Njdpjz Tf D Rjfx Aatjwn Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: ready for operation (used), Year of construction: 2004, Manufacturer: CE Johansson / Hexagon Metrology Model: Saphir 12.5-30-10 Machine Type: 9489-145 Serial Number: 8489-70305 Measuring Capacity X-axis: 1,250 mm Y-axis: 3,000 mm Z-axis: 1,000 mm Machine Dimensions Overall Width (B): 2,400 mm Internal Width (B₁): 1,450 mm Overall Length (D): 4,860 mm Overall Height (H): 3,790 mm Table Height (H₁): 700 mm Clearance Height (Hₚ): 1,150 mm Weight & Load Capacity Njdezrvg Uepfx Aatjwn Machine Weight: 8,200 kg Maximum Permissible Workpiece Weight: 6,000 kg Clamping Area: 1,450 × 3,400 mm Measuring Performance Resolution: 0.1 µm Accuracy (VDI/VDE 2617 Part 2.1): U₃ = 4 + 5L µm (L in meters) Speed & Acceleration Maximum CNC Speed: 500 mm/s Acceleration: 1,000 mm/s² Electrical Requirements Power Supply: 230 V ±10%, Single Phase, 50 Hz Power Consumption: 1,500 VA (10 A) Air Supply Operating Pressure: 6–10 kp/cm² (0.6–1.0 MPa) Air Consumption: 48 L/min at 5.5 kp/cm² (240 NL/min) Operating Environment Required Temperature Stability: ±1.0 °C Maximum Temperature Gradient: 0.5 °C Software PC-DMIS Version: CAD++ 2018 R2 (Release) Build: 535 (Pre-Release) Major Release Date: October 30, 2019

Condition: excellent (used), CATALOGUE NUMBER 7817 TECHNICAL DATA DDCA - Double-sided profiling machine - length of the profile 180 – 850mm - width of the profile 30 – 75mm - thickness of the profile 10 – 45mm - spindle diameter 30mm - max. disc diameter 250mm - 4 discs in a set 5 spindles: left side: - 1) vertical upper 2.2kW - 2) horizontal lower 2.2kW right side: - 1) vertical lower 2.2kW - 2) vertical upper 2.2kW - 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - 2 material clamping devices - stepless feed rate adjustment 0-10m/min - central lubrication via oil pump - pump motor 2.2kW - diameter of the dust extraction nozzle 5x100mm - dimensions L/W/H 1900x2230x1530mm DDGA - Four-sided planing machine - width of the workpiece 35 – 130mm - thickness of the workpiece 10-60mm - min. length of the workpiece 200mm spindle arrangement: - 1) lower 5.5kW - 2) right 5.5kW - 3) left 5.5kW Njds Af I Iqopfx Aatswn - 4) upper 5.5kW - spindles adjustable up/down - upper and lower spindle diameter 40mm - right and left spindle diameter 30mm - 4 feed rates 13/20/26/40 - central lubrication of the chain via oil pump - diameter of the dust extraction nozzle 4x120mm - dimensions L/W/H 3200x1370x1830mm DBCA - Profiling machine feeder - max. feed rate 40m/min - max. width of the profile 150mm - motor 0.55kW - overall dimensions L/W/H 2320x600x1150 DBGA - Moulding machine feeder - length of the mouldings 200-600mm - width of the mouldings 30-20mm - thickness of the mouldings 10-40mm - stepless feed rate adjustment 10-40m/min - motor 0.75kW - overall dimensions L/W/H 1500x500x980mm - total weight approximately 4900kg Net price: 63900 PLN Net price: 14860EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only, to identify the product. We only resell goods that the manufacturer has previously introduced to the market. We have no business relationship with the manufacturer.

Condition: used, Year of construction: 2018, operating hours: 5,200 h, functionality: fully functional, spindle bore: 52 mm, spindle diameter: 200 mm, VICTOR P20 Nwedpfx Aae Afpbpoton 8 INCH BAR CAPACITY 52 MM WITH LINEAR SLIDE 2018 MODEL CAN BE SEEN IN WORKING CONDITION THE MACHINE CAN BE SEEN IN WORKING CONDITION AT OUR TEKIRDAG CORLU WAREHOUSE.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,081 h, functionality: fully functional, machine/vehicle number: GB2-1402, turning length: 350 mm, spindle speed (min.): 4,000 rpm, spindle bore: 52 mm, mount diameter: 320 mm, rotational speed (max.): 4,000 rpm, overall weight: 4,500 kg, spindle diameter: 200 mm, VICTOR NP20 CNC LATHE 8 INCH Nwjdpfxj Afn Rco Aatsn BAR CAPACITY: 52MM WITH LINEAR GUIDES 12-STATION TURRET CUTTING TIME: 2081 HOURS CAN BE INSPECTED WHILE IN OPERATION THE MACHINE CAN BE INSPECTED IN OPERATING CONDITION AT OUR TEKIRDAG CORLU WAREHOUSE.

Condition: good (used), Year of construction: 2024, functionality: fully functional, Biesse ROVER C 1982 CNC Machining center (5-axis) Description; Working fields X = 8125 mm; Y =1950 mm Z= 470/500 mm UPS Closed chain cable holder X-axis 12 ATS Panel supports 48 sliding bases Pneumatic locking system in 2 work areas in X 8 aluminium lifting bar supports for loading ease of large and heavy pieces. 290 m3/h rotary claws vacuum pump Vacuum module - Size 132x146 - H74mm Vacuum module - Size 132x75 - H74mm Vacuum module - Size 132x54 - H74mm Belt conveyor for the removal of chips and off-cuts 21.6 kW (29.4 HP) operating unit with 5 interpolating axes HSK F63 adaptor and liquid cooling Suction hood with continuous positioning in Z controlled by NC Air-Jet cooling system Liquid chilling unit for liquid cooled systems Chain tool changer with 22 places at 180 mm centerdistance Strengthened gripper PC bTouch Presetter for the measurement of the tool length with diameter up to 130 mm bSolid 3D CAD-CAM program Additional license for bSolid Additional filter for vacuum pump SOPHIA - IoT Connection Roller lifting support in replacement of the standard one Enlargement of mesh guards and movement of the doors from front side to rear side to load profiles with length up to 11 meters (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Nwedpfxs Af Ii Ns Aatjn Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2007, functionality: fully functional, DOOSAN PUMA 240MB 2007 MODEL 8 INCH BAR CAPACITY: 65 MM CAPACITY: 350-550 MM FANUC OITC CONTROL TALAS CONVEYOR Nodo Afpigopfx Aatewn THE MACHINE CAN BE VIEWED AT OUR ISTANBUL WAREHOUSE.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, stroke length: 265 mm, throat depth: 410 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 6, table height: 900 mm, oil tank capacity: 250 l, overall weight: 12,500 kg, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, number of support arms: 2, pressing force: 175 t, clearance between the columns: 3,600 mm, distance table to ram: 530 mm, table length: 4,050 mm, table width: 104 mm, type of input current: three-phase, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Nwedpfxjz Imc Nj Aatjn Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Condition: used, Year of construction: 2023, functionality: fully functional, AKIRA SEIKI SR3XP 2023.02 BT40/11000 RPM LINEAR GUIDE 760-430-460 MM MITSUBISHI M845 CONTROL MACHINE CAN BE INSPECTED AT OUR ISTANBUL WAREHOUSE. Nwjdpj Afpf Ujfx Aatjn

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 2,500 h, power: 3.5 kW (4.76 HP), input voltage: 400 V, type of input current: AC, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 250 mm, number of axes: 3, number of slots in tool magazine: 9, controller manufacturer: VHF, actuation type: electric, total height: 2,200 mm, total length: 3,500 mm, total width: 2,200 mm, overall weight: 1,000 kg, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, VHF CAM 1530 PREMIUM – High-precision CNC gantry milling machine with extensive premium features For sale is a high-quality, virtually new VHF CAM 1530 Premium CNC gantry milling machine. The machine impresses with its high precision, robust industrial design, and extensive features. It is ideally suited for the professional machining of plastics, aluminum, and other non-ferrous metals, wood, and composite materials. Thanks to the automatic tool changer, the precise Jäger high-frequency spindle, and the powerful vacuum table, the system offers excellent conditions for efficient and demanding production tasks. The machine is offered as a comprehensively equipped complete package including control system, software, and numerous accessories. Reason for sale As part of the continuous development of our company and the associated realignment of our production, we are investing in a larger CNC system with expanded machining capabilities. For this reason, we are selling our VHF CAM 1530 Premium. Technical highlights * High precision: Repeatability of ± 0.01 mm * Generous travel ranges: X = 3,050 mm, Y = 1,550 mm, Z = 290 mm Nwsdpfsz Rz Hcex Aaton * Automatic 9-position tool changer including tool length measurement * Jäger high-performance spindle with up to 40,000 rpm * Three-zone vacuum table with separately activatable areas * Backlash-free ball screw drives on all axes * Dual linear guides and double Y-axis drive * Maximum feed rate of 10,000 mm/min * Automatic tool length measurement and Z-axis zero point determination * Extraction system and air cooling, expandable to minimum quantity lubrication * Suitable for contour machining, engraving, and 2.5D and 3D milling operations Equipped with a powerful, liquid-cooled high-frequency spindle from Jäger: Type: Chopper 2300-40 K S5A * Rated speed: 40,000 rpm * Peak power (Pmax/5s): 3.5 kW * Continuous power (S1): 2.3 kW * Hybrid ball bearing * Runout and flatness each below 2 µm * Pneumatic tool change * Tool holder WK19 * Protection class IP54 Software and control The system features a comprehensive software package: * CNC Term – control software * Rhinoceros 6 Commercial – professional 3D CAD modeling software * Cenon CAM – CAM software on a separately integrated Apple computer in the control tower This provides a wide range of options for design, work preparation, and CNC machining. Extensive accessory package The offered complete package includes, among other things: * Haimer Zero Master – professional 3D edge probe * Handwheel control * Three-zone vacuum table (3,000 × 1,250 mm) with vacuum pump * Two pneumatically switchable clamping jaws * Automatic tool changer * 10 tool holders WK19 * 15 collets in various diameters * Various milling and drilling tools * Uninterruptible power supply (Schrack UPS USSEP100) An attractive opportunity for professional users With the VHF CAM 1530 Premium, you acquire a high-quality CNC gantry milling machine that combines precision, flexibility, and extensive automation functions in a single system. Particularly interesting for manufacturing companies, plastics processors, model makers, advertising technicians, and companies looking to expand their CNC production economically.

Condition: used, Year of construction: 2010, X-axis travel: 500mm, Y-axis travel: 700mm, Z-axis travel: 500mm, accuracy: 2.6µm + L/165mm, probing system: LEITZ HP-S-X1S, probe head: TESA articulating probe head, new part, probe head controller, new part, software: PC-DMIS CAD++ 2014, last calibration: 03/2026, no visible defects, calibrated regularly over several years, an on-site inspection is possible. Node Afzawepfx Aatjwn

Condition: like new (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 2,250 kg, type of input current: AC, travel distance X-axis: 1,200 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, input voltage: 230 V, Equipment: type plate available, 3D coordinate measuring machine in gantry design Nwedpfx Ae Afzmdeatjn * Precise CMM with high performance * Probing head TESA-STAR-M (motorized), 7.5° indexable * Scanning probe system LSP-X1S Measuring range * X 1,200, Y 3,000, Z 1,000 [mm] Measurement uncertainty * 2.4 + L/333, max. 5.0 [µm] / ambient temperature 18 - 22°C * 2.8 + L/200, max. 5.0 [µm] / ambient temperature 16 - 26°C Dynamics (without active vibration isolation) * 3D traversing speed 500 mm/sec * 3D acceleration 1.5 m/sec² Probe system * TESA STAR M - motorized * Hexagon HP-S-X1S Controller * Hexagon FBII Controller (retrofit possible) Software * PCDMIS CAD++ 2026 Accessories: * Probe set, extensions, modules * Probe changing station - 6 positions Optional services * We offer transport, commissioning, acceptance testing, and calibration * Calibration according to DIN EN ISO 10360-2 / -4, /-5 Warranty * 12 months, starting from the date of acceptance (if installed by MQS AG)

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0-201-24-0260, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance Z-axis: 600 mm, workpiece length (max.): 3,470 mm, workpiece width (max.): 1,550 mm, number of slots in tool magazine: 18, controller manufacturer: HOMATIC, controller model: PC85, spindle motor power: 15,000 W, Equipment: CE marking, documentation/manual, Machine with shuttle console tables Workpiece length X max. (all units) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece length max. (milling cutter D=25 mm) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece width Y max. (all units) - max. 1300 mm Workpiece width Y max. (milling cutter D=25 mm) - max. 1550 mm Njdpj Afabaefx Aatown 2 individually movable console clamping tables - 4-position workpiece placement possible - 8 movable consoles (4 per table) each with 1 front stop - Console length 1490 mm - 4 lifting rails - Side stops 4 x left, 4 x right (mirror image) - 1 vacuum circuit per table - 2 vacuum pumps, 140 m3/h each - Chip conveyor belt Equipment / Units: - Milling spindle 15 kW, liquid cooling - Tool changer, 18-position carousel - C-axis with electrical interface - C-axis extension for FLEX-5 unit - Drilling unit 2.7 kW, 20 spindles vertical / 10 spindles horizontal - Swiveling sawing/drilling unit - Sawing unit D=1200 - FLEX5 sawing, milling, drilling unit for multi-tool - 16 pcs. suction cups 160x115 mm - 8 pcs. suction cups 125x75 mm Control / Software: - PC85 control system - WoodWop 5.1 - Wood Design Package - CAD plugin - DXF import - Schuler MDE Available from week 46/2026.

Condition: used, Year of construction: 2012, functionality: unexamined, GERIMA SMA 50P portable beveling/edge preparation machines for sale. Quantity: - 2 units Main specifications: - Manufacturer: GERIMA - Model: SMA 50P - Year: 2012 - Portable beveling/chamfering machines - Suitable for metal edge preparation and beveling applications - Supplied in transport cases Nedpfxezyah Se Aatswn - Inserts/accessories included, as shown in the photos Used equipment, sold as-is. Condition and completeness are shown in the photos. The listed price is for both units. Individual sale can also be arranged. Location: Estonia. Loading/collection: Forklift/pallet handling capability available on-site. Transportation is at the buyer’s expense.

Condition: used, Year of construction: 2016, machine/vehicle number: 95470039, functionality: fully functional, power: 32 kW (43.51 HP), workpiece length (max.): 9,800 mm, workpiece width (max.): 800 mm, workpiece height (max.): 270 mm, number of axes: 5, number of slots in tool magazine: 12, controller manufacturer: Yaskawa Sigma 5 SD, Equipment: CE marking, COVERTEK is a machining center for solid and laminated timber beams. A portal with movable positioning carriages enables the workpiece to be machined from six sides without having to turn it. The five-axis machining unit has a 17 kW spindle and an HSK-E63 tool holder with 12 positions. The machine can import data from CAD/CAM programs. Capacity and performance: • Workpiece width: 100–800 mm • Workpiece thickness: 70–270 mm • Workpiece length: maximum 9,800 mm • Blade diameter: 640 mm • Feed rate: maximum 80 m/min Other equipment and technical data: Nwedpfx Aez Smh Asatsn • Servo pack: Yaskawa Sigma 5 SD • Software: Osai OpenM Mechatrolink 3 • Automatic centralized lubrication • CE certified • Total power: 32 kW • Inverter: Vacon NXP

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand licence for the “SOLIDWORKS Professional” software Items for sale: 2 x SOLIDWORKS Professional with the following features incl. Toolbox incl. SOLIDWORKS Visualize Standard incl. PDM Standard (data management) Nwjdpfx Aaoz A D Aiston incl. eDrawings Professional incl. Costing Condition: This offer is for a second-hand licence, which may show signs of use (e.g. activations that have already been used). The licence has been tested to ensure it is fully functional Packaging and dispatch: Proper transfer of the licence and worldwide dispatch of the documentation are available on request! Before handover, proof of successful licence deactivation (screenshot) will be provided for you. For further information, you are of course welcome to contact us directly.

Year of construction: 2004, condition: used, A complete dental CAD/CAM system with a dental milling machine, 3D dental scanner, CAD/CAM software and extensive accessories is offered. The system consists of a DCS PRECIMILL M4 dental milling machine and a DCS PRECISCAN D4 scanner. Inspection possible by prior arrangement. Nedpfjz Sr Ndsx Aatewn

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 12 kW (16.32 HP), input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 150 mm, For sale is a Format-4 Profit H350R 5-axis CNC machining center, manufactured in 2021. This machine offers the highest precision, flexibility, and productivity for modern furniture, window, door, and interior design applications. Thanks to its powerful 5-axis technology, even complex machining operations can be carried out efficiently and economically. Technical specifications: Working area: X 3000 mm / Y 1550 mm / Z 150 mm 5-axis electrospindle with 12 kW power Tool holder HSK F63 Spindle speed up to 24,000 rpm Drilling head with 18 individually controllable drilling spindles Integrated nut saw unit Automatic central lubrication Cantilever table with vacuum clamping system 6 workpiece supports with stop system LED positioning system lightPos for quick and precise setup CNC control system including modern CAD/CAM connectivity The machine is in very good, well-maintained condition and is ready for immediate use. An ideal solution for craft and industrial businesses that value the highest machining quality and maximum flexibility. Special equipment: 001 Voltage supply 3x 400V; 50 Hz / 60 Hz 007 Motor 12 kW C15 Enclosed cable carrier in X and Y travel C41 Safety system with bumper including pendulum operation instead of light curtain C98 Optical status display of the machine 480 Vacuum release per console C58 Monitoring of all stop cylinders with 2 stop rows (6 workpiece supports) C91 Additional locking of the C/A axis C197 Pick-up station for saw blade, moving with X C198 4-fold linear changer, moving with X C29 Mobile control terminal instead of fixed control terminal C100*8 Vacuum suction cup FA 140 x 115 x 100 mm C101 Vacuum suction cup FA 125 x 75 x 100 mm C492 300-05-312 - F4Design-PLATINUM (without PP) C496 300-05-316 - F4Design - 4 axis post-processor Scope of supply: Nedpfx Ajz Rn T Ajatswn Includes transport and installation in the postcode areas 70, 71, 72, 73, 77, 78, 79, 86, 87, 88, 89 F4Integrate training for 4 people in 88299 Leutkirch Without tooling

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: AH/117989, functionality: fully functional, travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,200 mm, number of axes: 4, Usable work area X-axis = 3,086 mm Y-axis = 2,155 mm Z-axis = 100 mm C-axis for tool heads Work table: Slatted table with a phenolic resin base, grid 30 x 30 mm Multi-zone vacuum system WORKING UNITS Drilling unit Vertical spindle in X - 5 Vertical spindle in Y - 2 Motor power 2.2 kW Milling spindle 6.6 kW electric spindle HSK-F63 tool holder Tool changer: Linear tool magazine - 13 tool positions Automatic tool length measurement Nwjdpfx Ao Af Aarjaton Vacuum pump Becker 2 x 250 m³/h Control: PC control Busellato/SCM Program nesting module for “Wave” (Maestro) WAVE CAD/CAM software (depending on configuration) Handheld control unit Unloading device with integrated extraction system Machine dimensions L = 5120 x W = 3420 x H = 2120 mm Weight 3400 kg Additional drilling unit (ATEMAG)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, control type: CNC control, laser power: 6,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber laser machine for pipes YLT 6024 - AVAILABLE IMMEDIATELY high quality equipment Laser power: 6kW for pipes and profiles 6200mm length × 20-240mm diameter round 6200mm length × 20mm-240mm square automatic loading 3000-6200 automatic unloading 0-4000mm Equipped with: 3D BOCI Auto Focus cutting head MAX resonator with 6kW incl. German !!! On-site guarantee Nsdo Afn D Nopfx Aatswn THX tours Cypcut control CE safety is included: warranty CAD CAM software Installation Delivery within EU Training offered We have been looking after YAWEI machines for the European market for more than 20 years. We are your service partner for all questions. You can test an identical machine under power at any time. Come and visit us!

Condition: used, mileage: 279,956 km, power: 75 kW (101.97 HP), first registration: 04/2015, fuel type: diesel, next inspection (TÜV): 08/2028, color: white, gearing type: mechanical, emission class: euro5, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €7,900.00 net * Volkswagen Caddy Maxi 1.6 BlueMotion, 5 seats, wheelchair ramp, air conditioning, 2 sliding doors, Euro 5 * Seats (2+3) * 5-speed transmission * Radio CD * Front airbags * Daytime running lights * USB port * Isofix * Electric windows * Electric mirrors * Central locking * Start/Stop system * Tire pressure monitoring * Cruise control * Air conditioning * ABS * ESP * 1 wheelchair space * Wheelchair ramp, 300 kg capacity Nodpfx Aezuu Txeatown * Fog lights * Wheelbase 301 cm * Unladen weight 1679 kg * Payload 601 kg * Permissible total weight 80 kg * Passenger car registration * Vehicle no. 26 OPENING HOURS Monday - Friday from 9:00 AM to 5:00 PM (by appointment...) CONTACT INFORMATION Telephone: WhatsApp E-mail:

Year of construction: 1993, condition: used, Year of construction: 1993 Empty weight: 9.300 kg Dimensions (LxBxH): 442 x 280 x 195 cm Serial number: 210045 Year of manufacture: 1993 Cutting force: 20 metric tons, 200 kN Maximum sheet thickness for punching and nibbling: 6.4 mm Maximum punch diameter: 88.9 mm Working range in the transverse direction (X-axis): 1,270 / 2,540 mm Working range in the longitudinal direction (Y-axis): 1,000 mm Control system: Fanuc 16P Tool changer: yes Number of tool stations: 19 positions (16 fixed + 3 index) Required power capacity: 23 kVA Turret revolver with 16 + 3 x Auto Index Holders Length: 4,425 mm Width: 2800 mm Height: 1950 mm Weight: 9300 kg Central lubrication: yes Condition: fully serviced and overhauled Additional loading charges may apply Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. Njdpfez R S Thsx Aatewn The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, mileage: 176,785 km, power: 55 kW (74.78 HP), first registration: 07/2007, fuel type: diesel, overall weight: 2,205 kg, next inspection (TÜV): 11/2027, color: white, gearing type: mechanical, emission class: euro4, number of seats: 2, Equipment: ABS, central locking, * Second-hand (first owner was a car dealership) Nwedpfx Aj Af Dc Usatsn * Valid TÜV inspection until 11/2027 * Special equipment: Floor covering for passenger/cargo area (rubber), Flex Seat Plus package Additional equipment: Airbag on the driver's side, Anti-Slip Regulation (ASR), Aspherical exterior mirror, left, Floor covering at the front (rubber), Rear hinged doors with glazing, Body/superstructure: van, Child safety lock in the passenger compartment, High cargo area partition, without window, Headlamp range adjustment, Engine 1.9 L - 55 kW TDI (BSU), Rear fog light, Wheelbase 2682 mm, Sliding door on the right, Side protection strips, Seat cover/upholstery: fabric, Steel rims 6x15, Heat-insulating glazing, green tinted

Year of construction: 2020, condition: excellent (used), SHINING 3D FreeScan UE11 – Professional 3D Laser Scanner – Complete Set For sale is a professional, handheld SHINING 3D FreeScan UE11 laser scanner, designed for precise 3D measurements, quality control, reverse engineering, and industrial applications. The device utilizes blue laser technology, ensuring high accuracy and fast digitization of elements with complex geometries. The scanner comes from a professional industrial environment and is offered with a complete set of accessories. Technical Specifications: • Manufacturer: SHINING 3D • Model: FreeScan UE11 • Measurement Technology: Blue Laser • Number of Laser Lines: 11 • Measurement Accuracy: up to 0.02 mm • Scanning Resolution: up to 0.05 mm • Scanning Speed: up to 1,020,000 points per second • Measurement Type: Non-contact 3D spatial measurement • Communication Interface: USB • Laser Class: 2 • Design: Handheld, portable Functions and Applications: • Precise scanning of industrial components • Dimensional and quality control of parts • Reverse Engineering • Digitization of machine and equipment parts • Comparison of actual geometry with CAD models • Inspection of CNC-machined components • Creation of 3D spatial models • Verification of the geometry of prototypes and tools • Applications in the automotive, aerospace, machinery, and tooling industries Equipment – Complete Set: Nwjdez Si Swspfx Aatsn • SHINING 3D FreeScan UE11 laser scanner • 2 USB drives included with the device • Original connecting cables • Sets of reference markers • Original, durable transport case with custom-fit inserts • Other equipment as shown in the pictures Technical and Visual Condition: The device is used and in very good visual condition. The housing has a metrological control label with a date of 21.12.2022 and an expiration date of 21.12.2025. The scanner is offered with the complete set of accessories. Inspection and verification of the device are possible after prior arrangement.

Condition: used, Year of construction: 2019, functionality: fully functional, Used Biesse WINLINE 16 2Y – CNC machining center with 2 Y-axes The Biesse WINLINE 16 2Y is a CNC machining center with automatic workpiece handling, powerful electrospindles, and flexible machining options. The machine is suitable for efficient and precise machining of wood and panel materials. Specifications 30 kW electrospindle - HSK F63 tool holder - 25 kW continuous power (S1) - Programmable speed: 1,000–18,000 rpm - 360° interpolating C-axis with Direct Drive - High precision and flexible machining 5-axis electrospindle - 16.5 kW peak / 14 kW continuous power (S1) - HSK F63 tool holder - Water-cooled spindle - C-axis with 360° continuous rotation - B-axis with undercut capability up to -10° - Max. 18,000 rpm Tool changer - 44-position tool changer - Max. tool/aggregate weight: 10 kg Njde Aazt Tspfx Aatewn - Max. total tool weight: 140 kg ### Automatic workpiece handling - NC-controlled loading and unloading - 3 workpiece clamps - 6 EPS supports with clamps along the Y-axis - Option for an additional 2 supports - Max. workpiece size with automatic handling: 3,200 × 200 × 140 mm - Min. workpiece size with automatic loading: 300 × 40 × 40 mm ### Control and other equipment - bSolid CAD/CAM software with 3D simulation and collision detection - BH660 PC-based control - CE safety enclosure - Chip conveyor and automatic lubrication - UPS and wireless bPad - Conveyor belt for loading and unloading workpieces up to 3,200 mm - Labeling equipment, chip deflector, and 350 mm saw blade and horizontal milling head Contact us for more information about the machine's condition, price, and delivery.