Used D20 for sale (229)

Condition: used, machine/vehicle number: 6780216, Year of construction: 2020, operating hours: 1,288 h, load capacity: 2,000 kg, lifting height: 1,500 mm, empty load weight: 850 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 1,500 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 300 Ah Measured battery voltage in idle state: 25 V Dimensions & Weight Dimensions (L x W x H): 2,000 x 800 x 850 mm Own weight: 850 kg Service valid until: 09/2027 UVV (Occupational Safety) valid until: 09/2027 Operating hours: 1,288 h EQUIPMENT Former Toyota full-service unit Folding platform Battery charger Chsdpfx Aksz Dfqqenec All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift truck available on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 358

Condition: used, Surface Grinding Machine BLANCHARD type 20D Shelf diameter: Ø 915 mm Shelf speed: from 5 to 27 RPM Grindstone diameter: Ø 500 mm Maxi height under wheel: 450 mm Spindle motor: 30 CV - 715 RPM Chsdpozwgumofx Aknec Electromagnetic chuck Rapid Up/Down Voltage 220 V Tri Dimensions (L x W x H): 3700 x 2000 x 2600 mm Weight: 6 T

Condition: excellent (used), Year of construction: 2007, operating hours: 5,314 h, functionality: fully functional, machine/vehicle number: XD-20-BB-0452, spindle motor power: 4,300 W, turning length: 60 mm, spindle speed (max.): 8,000 rpm, turning diameter: 20 mm, spindle bore: 24 mm, overall weight: 3,250 kg, bar passage: 20 mm, total width: 1,490 mm, total length: 2,258 mm, total height: 1,758 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, drilling capacity: 10 mm, travel distance X-axis: 62 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 210 mm, thread cutting capacity: M 10, power of the servo motor: 940 W, counter spindle motor power: 3,800 W, counter spindle speed (max.): 8,000 rpm, Equipment: rotational speed infinitely variable, Hanwha XD20N, year of manufacture 2007 – CNC Swiss-type long-stroke lathe without a guide bushing. Compact CNC lathe for serial production of smaller, precision parts from bar stock. The machine is equipped with a main spindle, a counter-spindle, and four cross-drilling powered tools, which allows for complete machining of the part from both sides in a single simultaneous cycle. Particularly suitable for short and medium-length parts where a guide bushing is not required. Very low operating hours for the machine considering its year of manufacture: automatic operation hours 7,454 hours, machining time 5,314 hours. The machine comes with various collets and chucks – everything installed in the machine plus additional ones, as shown in the photos. Direct sale to the end-user only. Chedpfozw Nt Sjx Aknec W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: used, Year of construction: 2022, 20000 kg length 8000 mm width 3000 mm height 820 mm star lenkbar weight of the machine ca. 4,0 t dimensions of the machine ca. 8,25 x 3,0 x 0,82 mm Heavy duty trailer with - robust, low maintenance Cjdpoirwwtjfx Aknjhc - with reversible drawbar, length 1320mm - 50mm impregnated wooden support.

Condition: good (used), functionality: fully functional, Net price: 1,100.00 EUR Gross price: 1,309.00 EUR You will receive a proper invoice. Internal article number: 26093 Pneumatic press Schmidt Pressing force: 32 kN Stroke: 100 mm Connection: 220 V Ram holder: D20 mm Table: 300 x 220 mm Hole in table: D50 mm Dimensions (L x W x H): 35 x 60 x 130 cm Chodpfx Aksz E N Dwenec Weight: approx. 100 kg Fully functional. The pneumatic hoses should be replaced as they are partially porous. You are welcome to inspect the press while it is powered on, in our heated warehouse covering an area of over 500 m².

Condition: used, Year of construction: 1999, lifting height: 4,240 mm, free lift: 730 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, fork width: 1,120 mm, total height: 2,100 mm, total length: 2,600 mm, total width: 1,180 mm, color: yellow, Empty weight: 4.433 kg Lifting capacity: 2.500 kg - Year: 1999 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 90-00945 - Lifting capacity: 2500kg - Lifting height: 4240mm - Overhead clearance: 1980mm - Free lift: 730mm - Fork length: 1200mm - Maximum fork width: 1120mm - Minimum fork width: 200mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Free-lift, Joystick Chedpszhv Epofx Aknjc - Mast: Triplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 2600mm x 1180mm x 2100mm (l x w x h) - Transport weight [kg]: 4433kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0266, year of last overhaul: 2026, workpiece weight (max.): 3,600 kg, power of the milling unit: 10,250 W, disc diameter: 200 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Detailed information about the machines is provided in the attached file. Chjdoztyhrspfx Aknec

Condition: new, functionality: fully functional, machine/vehicle number: New20250206011, Year of construction: 2025, operating hours: 5 h, load capacity: 2,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: other, power: 5 kW (6.80 HP), gearing type: automatic, battery capacity: 100 Ah, remaining battery capacity: 100 %, battery voltage: 72 V, fork carriage width: 980 mm, fork length: 1,200 mm, ground clearance: 150 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 550, rear tire type: cushion tires (black), rear tire size: 44, overall weight: 2,700 kg, empty load weight: 2,700 kg, total height: 2,150 mm, total length: 2,200 mm, total width: 1,100 mm, Equipment: head guard, pallet forks, sideshift, Tyson CPD-20 Electric Forklift (2025) – Nearly New Tyson CPD-20 electric forklift in as-new condition with only 5 operating hours. The truck offers a lifting capacity of 2,000 kg and a lifting height of 4.5 m, making it an excellent choice for warehouses, workshops, production facilities, and general material handling tasks. Powered by an electric drive, the forklift provides quiet, emission-free operation and low running costs. Equipped with 1,200 mm pallet forks, automatic transmission, and cushion tires, it is ready for immediate use. Key specifications: Year: 2025 *Operating hours: 5 h *Load capacity: 2,000 kg *Lifting height: 4,500 mm *Electric drive, 72 V battery *Automatic transmission *Fork length: 1,200 mm *Overall weight: 2,700 kg *Pallet forks included Perfect for smaller warehouse operations, logistics centers, workshops, and companies looking for a reliable and cost-effective electric forklift with minimal usage. Chodpfx Akjz Iltgonec

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: documentation/manual, Machine in production, can be inspected. Machine is running without any defects. Machine is equipped with: - bar feeder FMB - swarf conveyour - increased pressure pump - 2x spindle - front and back drilling tools - live tooles for milling Chsdpfx Akezx Arqensc - part coveyour belt - signal lamp

Condition: good (used), functionality: fully functional, 4 x Wagner ZA 16 1 x Wagner MSD 20 19 mm shank, suitable for, e.g., Revolver Traub TD or Index A 25. List of thread inserts: M 0.8: 2 sets M 1.0: 7 sets M 1.25: 20 sets + 1 set on a Wagner head Csdpfxjz H H A Tj Aknehc M 1.5: 7 sets + 2 sets on a Wagner head M 1.75: 5 sets In total, 44 sets of thread inserts. See also the photos. The heads can be inspected at our warehouse.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 50166, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,295 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 2 m/min, feed rate X-axis: 3 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 710 rpm, spindle speed (min.): 15 rpm, rotational speed (max.): 710 rpm, total width: 8,500 mm, total height: 7,150 mm, total length: 20,720 mm, table length: 9,000 mm, table width: 2,000 mm, torque: 6,500 Nm, clearance between the columns: 2,750 mm, year of last overhaul: 2003, table height: 1,000 mm, table load: 45,000 kg, spindle motor power: 50,000 W, workpiece weight (max.): 45,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, GENERAL MACHINE CHARACTERISTICS The machine features a rigid gantry design with a movable table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindle heads of type VFS 160. Additionally, the gantry can accommodate one or two lateral (horizontal) spindle heads VFS 160. The specified spindle head types can be equipped with additional spindle heads, with up to 4 available. The clamping surface of the machine consists of two connected clamping tables, which can also be used separately when disconnected (only one can be active at a time). Clamping Table - Dimensions of one table: 2,000 x 4,000 mm - Total length of connected tables: 9,000 mm - Clamping surface of connected tables: 8,500 mm - Clamping T-slots (width x spacing x quantity): 36mm x 180mm x 11 pcs - Working table height from base: 1,000 mm - Load per meter of table length: 5,000 kg - Table travel: 4,250 mm (connected tables: 9,000 mm) - Working feed rate: 15 – 3,000 mm/min - Rapid traverse: 9,000 mm/min Gantry with Height-Adjustable Crossbeam - Clearance between columns: 2,750 mm - Crossbeam vertical adjustment: 2,295 mm - Crossbeam travel: 750 mm/min Vertical Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 10 – 2,000 mm/min - Rapid traverse: 2,000 mm/min - Distance from spindle nose to clamping table: 425 – 2,720 mm Horizontal Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 5 – 1,000 mm/min - Rapid traverse: 1,000 mm/min - Distance from spindle nose to table centering T-slot: 377 – 1,177 mm Chjdpoxpudtofx Aknoc Overall Machine Dimensions (L x W x H): 20,720 mm x 8,500 mm x 7,150 mm Additional Spindle Heads: NVS Head (Extension Adapter) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm HFUS Head (Universal Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 80 rpm = 22 kW - Max. torque: 2,700 Nm - Swivel range vertical axis: 360° - Swivel range horizontal axis: 360° - Quill adjustment: 50 mm HFOS Head (Double-Sided Right-Angle Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm

Condition: used, Year of construction: 2005, The machine is dosing ClO2 into water to use it in a Rinser. Chjdpfxsz Icn Is Aknsc

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Refrigerant pump station, complete with a control cabinet, pumps, and connecting fittings. The entire unit is mounted on a steel platform. Available for sale as a complete set or in individual components. Pumps with a capacity of 60 m3/hour are also available separately. Chodpezu R S Dsfx Aknsc

Condition: used, mileage: 274,000 km, power: 316 kW (429.64 HP), first registration: 12/2006, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: orange, gearing type: mechanical, emission class: euro4, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN TGA 41.430 sewer cleaning and suction vehicle 8x4, with camera For inquiries: 0526486 * Condition: very good * Output: 316 kW / 430 hp * Displacement: 10,518 cc * D20 Common-Rail diesel engine * ABS * ESP * Differential lock, rear axle * Auxiliary drive * Hydraulics * Storage compartment above driver / center / passenger * Exterior mirrors, electrically adjustable and heated * Air horns on the cab roof * 3 seats * Roof hatch, mechanical * Driver's seat, comfort, air-suspended and heated * Automatic climate control * Exterior sun visor, transparent * Axle configuration: 8x4 * Suspension: leaf spring / leaf spring * Planetary axle * EURO 4 * CD radio / AUX / USB * Rear view camera * Electric windows * Sun visor, 2-part, mechanically retractable * Fog lights Codpfxszaxule Aknshc * Rotating beacon on the roof * Tool and equipment boxes Superstructure: sewer cleaning and suction vehicle High-pressure flushing system * Powerful vacuum suction technology * Rear hose reel Tires: 1st axle: 385 / 55 R 22.5, 45% leaf-sprung 2nd axle: 385 / 55 R 22.5, 45% leaf-sprung 3rd axle: 315 / 70 R 22.5, 65% leaf-sprung 4th axle: 315 / 70 R 22.5, 65% leaf-sprung ----Price: 119,000 EUR + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and…? Typographical errors, errors and prior sale are subject to change.

Condition: excellent (used), Year of construction: 2004, Used CFS FRESHGRIND 200 grinder for sale. Chedpfx Akjzmwk Rsnoc Equipped with a loading device. Please let me know if you are interested.

Condition: good (used), Year of construction: 2000, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 20FT ISO CRYOGENIC TANK CONTAINER Manufacturer: Air Liquide Italia S.r.l. ISO Code 6346: 22KW IMO Portable Tank IMO Type 7 Transport Instructions: T75 ADR RID Tank Code: R11.7BN ISO Code 6346: 22KW Max. working pressure: 8 bar Chodpfx Aszd Saueknsc Hydr. test pressure: 11.7 bar Design Temperature: min -196 °C Material (Inner & Outer Vessel): High-grade Stainless Steel (X5CrNiN1810 UNI 7500) Insulation: Vacuum Double Envelope (Excellent current vacuum: 0.052 mbar) Safety Valves: 2x Herose Relief Valves (Set at 8 Bar) (p. 1) Vaporizers: Included & complete with piping Last Inspection: June 9, 2026 (5-Year Periodic Inspection by Bureau Veritas) Next Inspection Due: 12-2028 CSC Validity: Until 12-2028 (p. 1) Approval/Regulations: IMDG, ADR, RID, CSC, US DOT (p. 1) = Further Information = Year of Construction: July 2000 Model Year: 2000 Usable Material: Gas Unladen Weight: 8,300 kg Payload: 25,700 kg GVW: 34,000 kg Technical Condition: good Optical Condition: good Please contact Arne Honingh for further information.

Condition: refurbished (used), Year of construction: 1975, DISKUS GRINDING MACHINE (Double-surface grinding machine) DISKUS WERKE AG (FRANKFURT / MAIN), Type DDS 600 P, Year of manufacture 1975, COMPLETELY OVERHAULED in 2024. Chedjzzpaaspfx Aknec

Year of construction: 2021, condition: excellent (used), functionality: fully functional, IKA MHD 2000/10 powder wetting and dispersing machine, capacity 2500 liters/hour, solids capacity max. 1300 liters/hour, rotor speed 4200 rpm at 50 Hz, 18.5 kW motor suitable for frequency converter 20-60 Hz, product temperature max. 135°C, operating pressure -1 to +16 bar, operating pressure double jacket max. 2.5 bar, liquid inlet DN 25, solid inlet DN 65, outlet DN 50, product contact parts stainless steel AISI 316L or AISI 316Ti9, frame and lantern piece stainless steel AISI 304, weight approx. 400 kg, used in the production of plant-based proteins (pilot plant) Cedpfezu I Tfex Aknehc

Condition: new, 20000 kg length 6000 mm width 2450 mm height 697 mm lenkbar lenkbar size of tyres 450 x 300 weight of the machine ca. 2,8 t dimensions of the machine ca. 7,2 x 2,5 x 0,7 mm Heavy load trailer with - double steering - small turning circle Csdpfx Aksvn Ux Eenohc - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Fanuc control system, 11 axes, Csdjz E Ayfspfx Aknehc powered tools, tool changer spindle, Iemca tool magazine.

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: Csdpfjytcl Isx Aknjhc - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Door interlock switches, Safety light curtain, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1996, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 434 mm Control Siemens Sinumerik 840D total power requirement 54 kW weight of the machine ca. 10 t dimensions of the machine ca. 6000x2800 mm Spindle speed (max): approx. 0–4500 rpm Spindle speed (max): approx. 0–4500 rpm Spindle bore: approx. 65 mm Spindle taper: mostly DIN 55026 A6 / ISO taper X-axis travel: approx. 220 mm Z-axis travel: approx. 950 mm Feed rate: approx. 25 m/min Tools & equipment Tool turret: usually 2 turrets with ~12 tool positions Powered tools: possible depending on equipment Chodpfxozrzxij Aknec Tailstock: optional, often NC-controlled (SK30)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 37,745 h, spindle speed (max.): 10,000 rpm, overall weight: 2,500 kg, total width: 1,263 mm, total height: 1,671 mm, bar diameter (max.): 20 mm, product length (max.): 2,291 mm, number of axes: 5, This 5-axis Hanwha XD20 COMBINED was manufactured in 2013. It features a maximum rotation speed of 10,000 rpm and a maximum working diameter of Ø20 mm. The machine operates at a rated voltage of 220–240 / 380–415 VAC and has a weight of 2,500 kg. If you are looking to get high-quality turning capabilities, consider the Hanwha XD20 COMBINED swiss type turning machine we have for sale. Contact us for further details. HANWHA XD20 2 Units Available • Rated Voltage: 3 Phases, 200/220 VAC • Rated Current: 60 A • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA • Short Circuit Current Rating: 2.5 kA • Operation Air Pressure: 4–6 kg/cm² (3.9–5.9 bar) • Machining Hours (TEMPS USIN.): 37,745 h 24 m 26 s BAR FEEDER – IEMCA ELITE 220 R 32 LL not included, optional • Manufacturer: IEMCA • Model: Elite 220 R • Type: 32 LL • Year: 2014 • Air Pressure: 6 bar • Voltage: 200 V • Phases: 3 • Frequency: 50 Hz • Current: 8.1 A • Interrupting Capacity: 5 kA • Weight: 660 kg HANWHA XD20H • Rated Voltage: 3 Phases, 220–240 / 380–415 VAC Chodpfezcxagox Aknec • Rated Current: 60 A • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA • Max Rotation Speed: 10,000 rpm • Axis Control: 5 Axis • Operation Air Pressure: 4–6 kg/cm² (3.9–5.9 bar) • Max Working Diameter: Ø20 mm • Dimensions (L × W × H): 2258 × 1304 × 1758 mm • Weight: 3300 kg • Machining Hours (TEMPS USIN.): 43,977 h 52 m 57 s BAR FEEDER – IEMCA ELITE 220 R 32 LL not included, optional • Manufacturer: IEMCA • Model: Elite 220 R • Type: 32 LL • Year: 2013 • Air Pressure: 6 bar • Voltage: 200 V • Phases: 3 • Frequency: 50 Hz • Current: 8.1 A • Interrupting Capacity: 5 kA • Weight: 630 kg Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,076 h, spindle speed (max.): 10,000 rpm, overall weight: 2,500 kg, total width: 1,263 mm, total height: 1,671 mm, bar diameter (max.): 20 mm, product length (max.): 2,291 mm, number of axes: 5, This 5-axis Hanwha XD20V COMBINED was manufactured in 2014. It features a maximum rotation speed of 10,000 rpm and a maximum working diameter of Ø20 mm. With a robust design and a weight of 2500 kg, this machine is ideal for precision turning applications. If you are looking to get high-quality Swiss type turning capabilities, consider the Hanwha XD20V COMBINED machine we have for sale. Contact us for further details. HANWHA XD20V • 4 Machines Available • Maximum Working Diameter: Ø20 mm • Rated Voltage: 3 Phases, 200/220 VAC • Rated Current: 60 A • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA • Short Circuit Current Rating: 2.5 kA • Operating Air Pressure: 4~6 kg/cm² (3.9~5.9 bar)Machine 1 • Machining Hours (TEMPS USIN.): 43,977 hMachine 2 Csdszcxgajpfx Aknjhc • Machining Hours (TEMPS USIN.): 42,043 hMachine 3 • Machining Hours (TEMPS USIN.): 34,212 hMachine 4 • Machining Hours (TEMPS USIN.): 22,076 h IEMCA ELITE 220 R 32 LL (Bar Feeders) not included, optional • Manufacturer: IEMCA • Model: ELITE 220 R • Type: 32 LL • Bar Capacity: Ø32 mm • Air Pressure: 6 bar • Voltage: 200 V • Phase: 3~ • Frequency: 50 Hz • Current: 8.1 A • Interrupting Capacity: 5 kABar Feeder 1 • Year: 2013 • Weight: 630 kgBar Feeder 2 • Year: 2014 • Weight: 660 kg Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 1989, functionality: fully functional, Machine in good condition to be used, ready to work. Chodpfjxqfgzex Aknsc We are a printing company, we aren't machine dealers. Video of the machine in operation available. THE PRICE IS NOT NEGOTIABLE. THIS IS THE PRICE OF THE MACHINE INSIDE OUR WORKSHOP. THE PRICE MACHINE THE PRICE DOES NOT INCLUDES DISASSEMBLE, TRANSPORTATION, OR TAXES. If you want a specialized mechanic to disassemble the machine and put it inside a container for you, it would incur an EXTRA COST of 3000€. WHEN CONTACTING US, PLEASE PROVIDE US WITH A PHONE NUMBER WITH WHATSAPP, REMEMBER TO INCLUDE THE PREFIX OF YOUR COUNTRY.