Used Camlock for sale (158)

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange Hnsdpfx Afjdu Ufvs Ajr -Muck flange for: three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 270 -Cone: Ø 139.7 mm -Camlock recording -Weight: 13 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange Hnsdsduacqspfx Af Aer -Chuck flange: with driving pin -Outside: Ø 192 mm -Camlock cone size: 6 (106 mm) -Bolt circle: 2 x 160 mm bolt diameter 18 mm -Weight: 6 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 315 mm Hjdpfot Sz Evsx Af Aonr -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Bolt circle: Ø 135 mm -Dimensions: Ø 350 x 90 mm -Weight: 19 kg

Condition: good (used), Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Hjdpstxklyofx Af Asnr -Manufacturer: Röhm, four-jaw chuck Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 133 mm -Mounting: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Accessories: incl. 2 sets of interchangeable jaws and clamping tool -Dimensions: Ø200 x 185 mm -Weight: 24 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck Hjdpfxoxuflfo Af Ajnr -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck type DURO-S chuck size Ø 160 mm -Passage: Ø 42 mm -Bolt circle: Ø 83 mm -Mounting: Short taper 4 / cone 56 - 62 mm short taper flange with Camlock fastening Hnodpfx Asv Tlryjf Asr -Dimensions: Ø160 x 115 mm -Total weight: 9.6 kg

Condition: new, Year of construction: 2026, faceplate diameter 1000 mm faceplate with 4 clamps: inkl. boring diameter 280 mm weight 419 kg 4-jaw faceplate K72 – Ø 1000 mm Our high-precision 4-jaw faceplate K72 1000 mm was specially developed for the secure and reliable clamping of a wide variety of workpieces on lathes – ideal for asymmetrical, rectangular or difficult-to-position components. Technical features - Diameter: 1000 mm - Design: 4-jaw faceplate, independently adjustable jaws - Material: High-quality cast body for maximum stability and vibration damping - Clamping jaws: Standard with hard clamping jaws Optional clamping claws according to customer requirements (soft, special shape, special size) - T-slot design: for flexible additional clamping forces - High concentricity with heavy workpieces - Suitable for large turning diameters and high clamping forces Mounting & standardisation The K72 faceplate is not standardised as a complete faceplate (no uniform DIN or ISO standard for diameter, jaw geometry or hole patterns). However, the machine mounting is based on common standards, e.g.: - DIN 6350 (centring mount) - DIN 55029 (camlock mount, e.g. D11 / D15) = This allows adaptation to almost any machine, either directly or via adapter solutions. Other sizes & designs available on request Hnedpfox S Ry Sjx Af Asr In addition to the K72 1000 mm, we also offer other large faceplates for heavy-duty and special applications: K72 1250 mm K72 1800 mm K78 1800 mm K78 2000 mm ? Delivery to order ? Customised mounting design ? Clamping claws na Translated with (free version)

Condition: excellent (used), Year of construction: 2026, center height: 750 mm, total length: 4,200 mm, total height: 2,800 mm, total width: 2,300 mm, overall weight: 13,000 kg, feed length X-axis: 360 mm, feed length Y-axis: 800 mm, power: 28 kW (38.07 HP), Spinning machine LEIFELD - PNC 750 MACH-ID 9651 Make: LEIFELD Type: PNC 750 Control: BECKHOF PAULI Year: 2026 Retrofitted in 2026 New Controller  New SPS - SIEMENS  Main Power 28 kW Steel telescopic covers CE-Safety fence with door    Optional tooling for Parabolic 1200 mm Old owner machined 3 mm aluminum parts  Commisioning, Training, Tool, Installation Possible !! Hedpfx Afozd Dlvs Ajnr Max. blank / workpiece over bed:1500 Centre height over bed: 750mm Distance between centers: 1225mm Maximum sheet thickness: 7mm Stroke X-Axis: 360mm Stroke Y-Axis: 800mm Speedrange: 100 - 1000Rpm Power: 28kW Spindle taper head stock: 11DIN / Camlock Stroke pinole quill: 300mm Length: 4200mm Width: 2300mm Height: 2800mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1982, greates pass round over bed 820 mm workpiece weight max. 2.000 kg turning speeds 7,1 - 1.400 U/min Longitudinal Feed 0,063 - mm Hnodpfx Aszupn Def Aor Planar Feed 0,05 - 28 mm Travel Distance Plan Slider 520 mm Travel distance of the tailstock quill 280 mm center height over square guideway 400 mm bed width 0 mm faceplate diameter 800 mm total power requirement 30 kW Main Spindle: - Spindle head (DIN 55022): 11 - Camlock spindle head: 11 - Spindle bore diameter: 128 mm - Spindle diameter at the front bearing: 170 mm Lead screw: - Pitch: 12 mm - Diameter: 54 mm Circumferential diameter over the long cross slide: 515 mm Circumferential diameter in the bed recess: 890 mm Length of the bed recess in front of the main spindle: 269 mm Maximum workpiece weight with one support block: 2,500 kg Maximum workpiece weight with two support blocks: 3,150 kg Diameter of three- and four-jaw chucks: 315–500 m

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 40 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 7 W, Equipment: documentation/manual, Year of manufacture: 2000 Turning length: 1000 mm Hnodpexd Aigofx Af Ajr Swing diameter over bed: 330 mm Swing diameter over cross slide: 210 mm Distance between centres: 1000 mm Control type: FANUC Spindle nose: Camlock D1-4 Spindle bore: 40 mm Max. spindle speed: 3,500 rpm Spindle motor power: 7.5 kW Dimensions (L x W x H): 2100.0 × 1200.0 × 1600.0 mm Weight: 1200 kg

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 8,300 W, total height: 1,700 mm, total width: 1,750 mm, overall weight: 1,800 kg, controller manufacturer: FAGOR, controller model: 8055, product length (max.): 2,670 mm, number of axes: 2, Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details. - Description: 2-axis teach-in / cycle-controlled CNC lathe with Fagor 8055 CNC control- Control Unit: Fagor 8055 (CPU 8055/AB-T, AXES 8055, I/O 8055)- Distance between centers: 1000 mm - Center height (distance above centers): 200 mm - Max swing over bed: Ø 400 mm- Turning length: 1,000 mm- Maximum turning diameter over slide: 220 mm- Travel range, Z-axis: 1,000 mm- X-axis travel: 220 mm- Turning tool cross-section: 20x20 / 25x25 mm- Spindle thread: Camlock 5- Internal taper: 1:20- Spindle bore: ø51.6 mm- Spindle speed: 0–3000 rpm, continuously variable- AC Motor Drive: 18.5 / 8.3 kW- Tailstock Quill Diameter: 52 mm / MK4- Tailstock Quill stroke: 145 mm- Power supply: 400 V / 3-phase / PE- Rated power: 10 kVA- Included Equipment / Accessories:- SMW AUTOBLOCK wedge-type chuck (includes several base jaws)- Multifix quick-change tool holder (includes several different tool holders), chuck key- Drill chuck- Rotating center- Safety device fully functional Technical Specification Counter Spindle No Hnjdpfx Aozrvktef Ajr Driven Tools No

Condition: good (used), Permanent circular magnet with star-pole arrangement Technical data: Diameter: 350 mm Central through-hole diameter: 40 mm Features: Hsdpfxjzrgy Se Af Asnr Flange with Camlock fitting, size 6, diameter: 315 mm Condition: good, technically inspected

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 6V0146, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Hjdpfx Aewmm S Tef Aenr Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex display Dyson apprentice training facility, in excellent condition

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 5V0168, MACHINE SPECIFICATION Height of centres 280mm Swing over bed 554mm Swing over cross slide 370mm Swing in gap 830mm Width in front of faceplate 216mm Bed length between centres 2000mm Spindle speeds: number 3 Spindle speeds: ranges 18-200,55-605, 160-1800rpm Spindle nose mounting Camlock D1-11 Spindle bore 104mm Taper in nose bush No. 5MT Width over bedways 400mm Hsdpfxozna Twj Af Ajnr Travel of cross slide 300mm Travel of top slide 175mm Travel of tailstock barrel 178mm Tailstock in tailstock barrel No. 6MT Approx. Weight 3650Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chuck Quick change toolpost and 4-off toolholders Bedstop Lighting Chuck guard Coolant system Rear splashguard

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Hsdpsnxi H Usfx Af Aenr Rear splash guard

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6V0148, MACHINE SPECIFICATION Hnjdpfxswmm H Rs Af Aer Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex Dyson apprentice training facility, in excellent condition

Condition: new, functionality: fully functional, EUROPA eturn VS390. The workhorse of any workshop or toolroom, a 390mm swing over the bed and choices of 760, 1000 or 1250mm between centres. Newall DRO and Bison Chucks are standard across the Europa Lathe Range. Machine Specification EUROPA eturn VS390 Swing over bed 390mm Hedpfxonzhtwo Af Aonr Centre height 190mm Swing over cross slide 240mm Swing in gap 610mm Spindle Nose D1-6 (Camlock) Spindle Bore 54mm The EUROPA eturn VS390 Series is a gap bed centre lathe with a 390mm swing over the bed, 610mm in the gap and is available in three distance between centres. 750mm (30”), 1000mm (40”) and 1250mm (50”). Colchester Triumph sized machine. EEMT: Europa Energy Management Technology: The machine switches to a ‘sleep mode’ once a preset time limit has passed of inactivity. One press of a safety button and the machine is ready for operation. Reducing energy overheads. BISON: Bison 250mm dia 3 jaw scroll & 4 independent Jaw chucks with hard jaws are supplied as standard equipment. Manufactured in Europe, BISON chucks are manufactured to DIN55029, ISO702/11 standards for accuracy. NEWALL: A NEWALL NMS300 Digital Readout is professionally fitted and located on the saddle for operator ease of operation in mind. It makes so much sense, to install the DRO close to where the operator has his turning tool. The DRO travels with the machine. ELECTRONIC Variable Spindle Speed: Each model features a Schneider inverter controlling the spindle for exact turning requirements allowing you to select the correct turning speed for the job in hand. No hidden costs! Machine ready for turning: A Quick Change Toolpost complete with a set of toolholders ensures the EUROPA eturn VS lathe is supplied ‘ready for operation.’ DIN8605: An industry recognised quality standard, the entire range of EUROPA eturn VS lathes are built to the demanding toolroom standards of DIN8605

Year of construction: 1975, condition: ready for operation (used), Offered is a precision lead and feed screw lathe: Center distance: approx. 1000mm, center height: 180mm, swing diameter over bed: 360mm, spindle bore: 35mm, spindle mount: D1-3 Camlock, spindle taper: MK5 (MT5), speed steps: 12 speeds, speed range: approx. 40-1800rpm, longitudinal feeds: 0.05-0.7mm/rev, cross feeds: 0.02-0.4mm/rev, metric threads: 0.4-7.0mm, inch threads (Whitworth): 4-56threads/inch. Inspection possible by appointment. Hedpoyzr Hxofx Af Ajnr

Condition: used, TRAK / XYZ SLX 355 is a CNC turning lathe of high precision, engineered for superior accuracy and reliability. It features 2 axes, centre height 360 mm, distance between centres 1000 mm and centre height over slide 225 mm; spindle hole 52 mm; Z travel 1000 mm and X travel 190 mm. Rapid traverse Z 4 m/min, X 3 m/min; spindle speeds 50–1410 and 100–4000 rpm. Spindle nose D1-6 Camlock and Morse taper MK4. Delivers tight tolerances; suitable for automotive, aerospace, medical, watchmaking and machine tool applications. Hnjdpfjzqbmksx Af Aor

Condition: good (used), Used stainless steel pressure vessel Article number: 10398 Volume: 400 liters Type: Standing on rollers with forklift tunnel Material (in contact with the medium): 1.4404 / AISI316L Manhole: 410mm Design: Single-walled Bottom: Conical bottom Top: Curved Operating pressure according to nameplate: +2.2 bar Vessel dimensions: Outer diameter: 750mm Hjded R Hfdopfx Af Aenr Distance from outlet to bottom: 120mm Overall height: 1840mm Overall width: 900mm Overall length: 750mm Features: Nameplate: Yes Outlet type: Camlock

Condition: good (used), Used stainless steel transport container / silo Quantity: 17 Item number: 10440 Last known use: Unknown Volume: 650L Type: Upright, in a galvanized frame Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Bottom: Conical bottom Top: Arched Operating pressure according to nameplate: ATM Container dimensions: Distance from outlet to bottom: 250mm Overall height: 1655mm Overall width: 830mm Overall length: 1030mm Materials: Inside: 1.4301 / AISI 304 Outside: Galvanized steel Hodpfxed Sw Dfj Af Aenr Equipment: Nameplate: Yes Outlet: DN80 Outlet valve: Camlock Top completely removable

Condition: good (used), Used stainless steel pressure vessel on rollers Item number: 10399 Volume: 400 liters Type: Standing on rollers with forklift tunnel Hnsdpfx Afsd R Hfho Aor Material (in contact with media): 1.4404 / AISi316 Manhole: 410mm Design: Single-walled Bottom: Conical bottom Top: Curved Operating pressure according to nameplate: +2.2 bar Dimensions of the vessel: Outer diameter: 750mm Distance from outlet to bottom: 170mm Overall height: 1800mm Overall width: 890mm Overall length: 820mm Equipment: Various connections Nameplate: Yes Outlet type: Camlock

Condition: new, Year of construction: 2026, faceplate diameter 1000 mm faceplate with 4 clamps: inkl. boring diameter 280 mm weight 419 kg 4-jaw faceplate K72 – Ø 1000 mm Our high-precision 4-jaw faceplate K72 1000 mm was specially developed for the secure and reliable clamping of a wide variety of workpieces on lathes – ideal for asymmetrical, rectangular or difficult-to-position components. Technical features - Diameter: 1000 mm - Design: 4-jaw faceplate, independently adjustable jaws - Material: High-quality cast body for maximum stability and vibration damping - Clamping jaws: Standard with hard clamping jaws Optional clamping claws according to customer requirements (soft, special shape, special size) - T-slot design: for flexible additional clamping forces - High concentricity with heavy workpieces - Suitable for large turning diameters and high clamping forces Mounting & standardisation The K72 faceplate is not standardised as a complete faceplate (no uniform DIN or ISO standard for diameter, jaw geometry or hole patterns). However, the machine mounting is based on common standards, e.g.: - DIN 6350 (centring mount) - DIN 55029 (camlock mount, e.g. D11 / D15) = This allows adaptation to almost any machine, either directly or via adapter solutions. Other sizes & designs available on request Hnodox S Rzcepfx Af Ajr In addition to the K72 1000 mm, we also offer other large faceplates for heavy-duty and special applications: K72 1250 mm K72 1800 mm K78 1800 mm K78 2000 mm ? Delivery to order ? Customised mounting design ? Clamping claws na

Condition: used, TECHNICAL DETAILS - max. diameter over bed : 270 [mm] - max diameter over slide : 130 [mm] - distance between centers : 440 [mm] - spindle nose : CAMLOCK D1-3' - max bar diameter : 28 [mm] - power : 7.5 [kW] - spindle speed : 0-5000 [rpm] with variator - strokes X x Z : 180 x 400 [mm] - work feeds : 0-5000 [mm/min] with variator Hedpfx Aouhcarjf Asnr - quick feeds : 7500 [mm/min] - supply : tri 380V 50Hz 14kW - size : 1700 x 1226 x 1660 [mm] - weight : 1415 [kg] EQUIPMENT - numerical control FANUC 20-T - quick change turret Multifix 'A' - collets chuck SCHAUBLIN B32 - tail stock with capstan - coolant tank with pump

Condition: new, WORKING RANGE TURNING - swing diameter (max) 470 mm - turning diameter (max) 235 mm - worpiece length max. 1000 mm BED GAP / BRIDGE - swing in gap 690 mm MAIN SPINDLE - spindle bore diameter 58 mm - spindle revolutions (min) 20 /min - spindle revolutions (max) 2000 /min - number of gears 12 - spindle diameter 58 mm SCREW CUTTING SPINDLE - advance z-axis (min.) 0.05 mm/r - advance z-axis (max.) 0.82 mm/r - advance x-axis (min.) 0.02 mm/r - advance x-axis (max.) 0.4 mm/r TAILSTOCK - taper: MK 4 ELECTRICAL SPECIFICATIONS - total power consumption 5.5 kW DIMENSIONS / WEIGHTS - space requirements -left/right- 1900 mm - space requirements -front/back- 810 mm - total height 1220 mm - total weight approx. 1800 kg << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>> The machine is available with peak widths from 760mm to 2000mm. This offer is a storage machine at a promotional price (Original price incl. These options: 28962.- ) We will send you a non-binding offer with your desired specifications. -> Description as well as standard and special equipment can be found in the PDF file. This storage machine is equipped as follows: Including the following standard accessories, u. a .: - 3-way precision spindle with SKF (FAG) bearings - Spindle brake mechanically - Complete electrical equipment - Coolant device with rear splash guard and splash guard on the slide - Food protection - Shift rod with 3 adjustable cams - Solid grain tip - Covered tension spindle - Set of machine mounting plates - Machine lamp 24 V Hnedpsfcqtcjfx Af Aer - Operating instructions with test report - CE conformity declaration Incl. Special accessories, u. a .: Article no. 5200 B Steel holder head B, type Multifix (without tool holder) Article no. 6405 DA3A-470-1000 Digital Position Indicator ARBAH (Made in EU) 1 for SJ-470 / 1000S, including counter, 3 scales, Stands, covers and mounting Article no. 5300 3544-250-6 3 jaw lathe chucks BISON, steel body Ø 250 mm, Camlock D-6, concentric clamping, bore Ø 76 mm each with a set of one-piece turning and drilling jaws