Used Camlock for sale (146)

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 1500 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Gujdped I Az Sjfx Aftjk Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quill Travel 150 mm Quill sleeve Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. Gusdjwgbuispfx Aftsk - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: used, Year of construction: 1986, turning diameter over bed:335 mm Guedpfx Ajufud Rjftek turning diameter over slide rest:165 mm turning length:635 mm total power requirement:2,2 kW :3 - Achsen - Digitalanzeige :Ø 40 mm :30 - 2500 U/min :D1-4 Camlock 4-jaw-chuck diameter:200 mm 3-jaw chuck:200 mm mm :MK 3 weight of the machine ca.:860 kg dimensions of the machine ca.:1700x1000x1700 mm digital readout:Heidenhain Machine is in good condition. Accesssories like tool holders etc come with the machine

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, turning diameter: 360 mm, spindle speed (max.): 2,300 rpm, power: 4 kW (5.44 HP), Lathe DR 180 S x 750 mm Conventional precision lathe in stepless design Center height 180 mm Center width 750 mm Bed width 250 mm Turning Ø over bed 380 mm Turning Ø over cross slide 245 mm Turning Ø over bed offset 500 mm Main spindle bore 40 mm Main spindle mount CAMLOCK D1-5 Spindle speed range 0-2300 rpm Steps in gearbox 3 pieces Main motor power 4 kW Including 24 V LED machine lamp 3-axis digital readout FAGOR 40i TS with constant cutting speed Gjdotzkfkepfx Aftjuk Quick-change steel holder "Multifix" with 5 inserts 3-jaw chuck AIRLOC Schrepfer machine feet Machine immediately available from stock!

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Gujdpfx Aov Iqm Seftjk Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: new, Precision gear, lead screw, feed shaft, control rod turning lathe, bed and gear wheels hardened and ground, mainspindel, tapered roller bearings and V-ledge cross/top slide adjustable, camlock C4, top slide 360° rotable, tailstock adjustment +/- 5 mm for taper turning, high cutting capacity, Standard equipment: 3-axis digital readout systems base frame halogen lamp 3-jaw chuck 160 mm 4-jaw chuck 200 mm face plate 250 mm 2 follow rests Technical data: center height 165 mm distance between centers 1100 mm max. diameter of workpiece 460 mm cone spindle MK5 bore spindle 38 mm spindle speed 50 to 1500 RPM speeds 9 Gedpfsvrv Ebjx Aftsuk motor power 2 kW S6 (1,5 kW S1) weight 510 kg

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 1500 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Gsdpsd I A Ahofx Afteuk Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: new, Year of construction: 2025, Industrial universal lathe with speed adjustment from from 8 rpm. Turning diameter – 500 mm, 1500 mm turning length, 105 mm spindle bore. Machine features Modern industrial universal lathe, easy in handling, equipped with a 3 axes digital readout. Useful in renovation and tool departments as well as in high quantity production. Wide area of application, including mechanical engineering, manufacturing, high quantity machining, training workshops, etc. Removable bridge allows for machining elements of large diameter Modern bearing of the main arbor with ball bearings Central system of switching feeds, a lead screw and a lead shaft for threading Accurate speed and feed adjustment Bed of the machine is torsion-resistant and vibration-free, providing basic grounds for accurate turning Technical data Swing over bed 500 mm with LCD readout Swing over cross slide 300 mm Turning diameter over bridge gap 710 mm Turning length over bridge gap 240 mm Centres distance 1500 mm Bed inductively hardened Bed width 400 mm Lathe chuck diameter 315 mm Gedji Apqljpfx Afteuk Spindle bore diameter 105 mm Spindle mount D1-8 CAMLOCK Spindle taper MK6 Spindle speed 36–1600 rpm (12 levels) Maximum tool dimensions 25×25 mm Longitudinal feed range 0.063–2.52 mm/turn Transverse feed range 0.027–1.07 mm/turn Metric thread 1–14 mm (22 types) Inch thread 28–2 stroke/inch (25 types) Modular thread 0.5–7 mm (18 types) D.P. thread 56–4 D.P. (24 types) Rapid longitudinal feed longitudinal – 4.5 m/min, transverse – 1.9 m/min Tailstock quill diameter 75 mm Tailstock quill stroke 150 mm Tailstock taper MK5 Digital readout for 3 axes Main motor power 7.5 kW Coolant pump power 0.09 kW Overall dimensions 3132×975×1270 mm Net weight 3300 kg (3800 gross) Default equipment 3 axes digital readout Ø315 mm self-centering 3-jaw chuck Ø400 mm independent 4-jaw chuck Face plate Follow rest Steady rest Spindle reducing sleeve Dead centre Cross slide rapid feed Foot emergency brake Chips guard on the whole lathe length Newest guard covers EC regulation compliant Cooling system 24V halogen lighting Indicator / gauge for threads Set of handling tools User manual EC declaration of conformity For more information you can visit our web page.

Condition: new, Year of construction: 2025, DPF HEATER PRO PLUS™ is a device designed for drying all types of diesel particulate filters (DPFs) and catalytic converters, made entirely of stainless steel AISI 304 and acid-resistant steel AISI 316. It is equipped with an integrated measurement system and a drying system that operates at temperatures up to 130°C using a side-channel turbine. A built-in thermal printer allows for printing contamination measurements of the filter both before and after regeneration. This device is an excellent additional option for DPF cleaning machines that do not have an integrated drying system. BENEFITS OF USING THE DPF HEATER PRO: - Operates independently of the regeneration machine - Optimizes the filter regeneration process - Low drying costs - Contamination measurement system – test results confirmed with a printout - Quick filter clamping system – Camlock - Adapters for passenger cars and trucks Gsdpfxeglpywe Aftsuk - Full automation of the drying process TECHNICAL PARAMETERS: - Weight: 100 kg - External dimensions (L x W x H): 92 x 51 x 114 cm - Voltage: 3 x 400 V - Maximum power: 7.5 kW - Frequency: 50 Hz - Ambient temperature: 5 - 35°C - Airflow: up to 390 m³/h - Overpressure: up to 370 mbar - Vacuum: up to -300 mbar - Measurement system: integrated - Drying system: integrated - Hose diameter: 6/4" - Drying temperature: adjustable within 70°C - 130°C - Safety features: pressure sensor, emergency safety switch - Declaration of conformity: CE

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT Guedpfov Iqlzox Aftek - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: new, Precision full gear, lead, pull, switching spindle Lathe, bed and gear wheels hardened and ground. Main spindle, tapered roller bearings and V-ledges, face/top slide adjustable. Camlock mount C5, top slide rotatable 360°. Tailstock adjustment +/- 5 mm for taper turning, High cutting performance, DIN acceptance protocol, Operating and spare parts list. Without oil filling. Standard equipment: 3-axis digital display. Base frame Foot brake Coolant system Halogen lamp Gjdpjvrv Enofx Aftjuk 3-jaw American chuck 200 mm 4-jaw American chuck 200 mm Faceplate 250 mm 2 steady rests Technical data: Center height 180 mm Center width 1000 mm Max. turning diameter 506 mm Spindle bore 51 mm Tailstock taper MK 4 Spindle taper MK 6 Spindle speed 70 to 2000 rpm Speeds 8 Main motor output 2 kW S6 (1.5 kW S1) Weight 600 kg

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Gedpfx Afed I A Dhjteuk Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Dimensions 2500 x 1100 x 1380 mm

Condition: new, Precision full gear, lead, pull, switching spindle Lathe, bed and gear wheels hardened and ground. Main spindle, tapered roller bearings and V-ledges, face/top slide adjustable. Camlock mount C4, top slide rotatable 360°. Tailstock adjustment +/- 5 mm for taper turning, High cutting performance, DIN acceptance protocol, Operating and spare parts list. Without oil filling. Gusdovrv Ehepfx Aftek Standard equipment: 3-axis digital display. Base frame Foot brake Coolant system Halogen lamp 3-jaw American chuck 160 mm 4-jaw American chuck 200 mm Faceplate 250 mm 2 steady rests Technical data: Center height 165 mm Center width 1100 mm Spindle bore 38 mm Spindle cone MK 5 Tailstock taper MK 3 Spindle speed 65 to 1810 rpm Speeds 18 Main motor output 2 kW S6 (1.5 kW S1) Weight 540 kg

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Gjdpod I A Auofx Aftsuk Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: new, The new Hans Schreiner stepless metal lathe with lead and feed spindle and face feed. Bed and gears hardened and ground. Main spindle, tapered roller bearings and wedge strips. Camlock mount C4, top slide rotatable 360°. Tailstock adjustment +/- 5 mm for taper turning, good cutting performance. Speed continuously adjustable using electronic speed control with digital speed display. Gujdpfevrv D Djx Aftek Incl. three-bank chuck 160 mm and steady rest. The 2-axis digital display guarantees the highest precision when turning. Technical data: Centre height 140 mm Centre width 650 mm Max. turning diameter 280 mm Spindle bore 38 mm Spindle cone MK 5 Tailstock taper MK 3 Spindle speed 75 - 500 rpm and 300 to 2000 rpm Speeds 2 Main motor power 1.5 kW S6 Voltage 230 volts Weight 210 kg Standard equipment: 3-jaw American chuck 160 mm with interchangeable jaws for internal turning Centering point 2-axis digital display Optional equipment: Base frame with drawer

Condition: as good as new (ex-display), Year of construction: 2025, Technical specifications height of Center 330 mm Gusdpfxjdzzw As Aftek Length between center 3000 mm Spindle bore 82 mm Swing over bed 660 mm Swing in the gap 840 mm Swing over slider 420 Speed range 9-1600 rpm (24 steps) Spindle nose ISO 702 / II No. 8 Camlock Range of longitudinal feeds 0,028 - 6,43 mm / rev (93 steps) Range of feed rates 0,012 - 2,73 mm / rev (93 steps) Metric threads 0.5 - 224 mm (48 steps) Inch thread 72 - 1/8 speed / inch (49 steps) Module thread 0.5 - 112 mm (42 steps) Diametral thread 56 - 1/4 DP Quill diameter 75 mm Quill travel 150 mm Quill holder Morse cone 5 Motor power 7,5 kW Weight 3,300.00 kg Dimensions 4635 x 1050 x 1450 mm

Condition: new, The new Hans Schreiner stepless metal lathe with lead and feed spindle and face feed. Bed and gears hardened and ground. Main spindle, tapered roller bearings and V-ledges. Camlock mount C4, top slide rotatable 360°. Tailstock adjustment +/- 5 mm for taper turning, Good cutting performance. Speed continuously adjustable using electronic speed control with digital speed display. Incl. three-jaw chuck 160 mm and steady rest. Technical data: Centre height 140 mm Centre width 650 mm Max. turning diameter 280 mm Spindle bore 38 mm Spindle cone MK 5 Tailstock taper MK 3 Spindle speed 75 - 500 rpm and 300 to 2000 rpm Speeds 2 Main motor power 1.5 kW S6 Voltage 230 volts Gsdpfx Aevrv Dwjftjuk Weight 210 kg Standard equipment: 3-jaw American chuck 160 mm with interchangeable jaws for internal turning Centering point Optional equipment: 2-axis digital display Base frame with loading Milling attachment for milling

Condition: used, Hans Schreiner metal lathe Superut 1500 Digital Gjdpfevr I Rpjx Afteuk Technical data: Centre height 250 mm, centre distance 1500 mm, max. turning diameter 500 mm, spindle mount Camlock 8, hollow spindle 80 mm, tailstock taper MK5, spindle speed 24 to 1600 rpm, speeds 15, main motor output 7.5 kW, max. diameter over cross slide 300 mm, max. turning diameter in the bridge 630 mm, longitudinal feed 0.07 - 4 mm/revolution, cross feed 0.02 - 1.35 mm/revolution, metric. Thread 0.5 - 28 mm pitch, inch thread 56 - 1 threads/inch, module thread module 0.5 - 3.5, thread diametrical pitch 56 - 8, spindle diameter/travel 65/120 mm, weight 1910 kg

Condition: as good as new (ex-display), Precision full gear, lead, pull, switching spindle Lathe, bed and gear wheels hardened Gjdovrvvgopfx Afteuk and ground. Main spindle, tapered roller bearings and V-ledges flat/top slide adjustable. Camlock mount C5, top slide rotatable 360°. Tailstock adjustment +/- 5 mm for taper turning, High cutting performance, DIN acceptance protocol, Operating and guide rings metric With 3-axis Sino digital display and removable bed Standard equipment: Sino 3-axis digital display Tool quick-change holder E Base Foot brake Coolant device Halogen lamp 3-jaw American 200mm 4-jaw American 200mm Faceplate 320mm 2 steady rests Technical data: Center height 200 mm Center width 1000 mm Max. turning diameter without bed 550 mm Spindle bore 55 mm Spindle taper MK 5 Spindle speed 55 to 2000 rpm Speeds 12 Tailstock taper MK 4 Main motor output power S1 2.4 kW, 400V Weight 800 kg

Condition: as good as new (ex-display), Hans Schreiner metal lathe, P1000 Digital Gusdpfx Afjvrvu Njtjk 3-jaw chuck 315mm, 4-jaw faceplate 320mm, clamping disc 430mm, driving disc 250mm, steady rest, travelling steady rest, magnetic brake, switchable automatically and with foot operation, coolant system, halogen lamp, splash guard, chip tray can be pulled out to the front, fixed punch, roller punch Mk5, removable bed, hardened and ground bed and gear wheels without oil filling incl. Multifix Set B and 3-axis digital display Technical data: Center height 250 mm Center width 1000 mm max. turning diameter 500 mm spindle mount Camlock 8 hollow spindle 80 mm tailstock taper MK5 spindle speed 24 to 1600 rpm Speeds 15 Main motor output 5.5 kW Max. diameter over cross slide 300 mm Max. turning diameter in the bridge 630 mm Longitudinal feed 0.07 - 4 mm/revolution Cross feed 0.02 - 1.35 mm/revolution Metric thread 0.5 - 28 mm pitch Inch thread 56 - 1 threads/inch Module thread module 0.5 - 3.5 Thread diametric pitch 56 - 8 Quill diameter/travel 65/120 mm Weight 1700 kg

Condition: used, Demonstration machine Hans Schreiner - metal lathe, 3-jaw chuck 315mm, 4-jaw faceplate 320mm, clamping disc 430mm, drive plate 250mm, steady rest, ride-on rest, magnetic brake, Gjdpevrvvaefx Aftouk switchable automatically and with foot operation, coolant system, halogen lamp, splash guard, chip tray can be pulled out to the front, fixed punch, roller punch MK5 removable bed, hardened and ground bed and gear wheels without oil filling incl. Multifix Set B and 3-axis digital display Technical data: Centre height 300 mm Centre width 2000 mm max. turning diameter 600 mm spindle mount Camlock 8 hollow spindle 80 mm tailstock taper MK5 spindle speed 24 to 1600 rpm Speeds 15 Main motor output 7.5 kW Max. diameter over cross slide 350 mm Max. turning diameter in the bridge 680 mm Longitudinal feed 0.07 - 4 mm/revolution Cross feed 0.02 - 1.35 mm/revolution Metric thread 0.5 - 28 mm pitch Inch thread 56 - 1 threads/inch Module thread module 0.5 - 3.5 Thread diametric pitch 56 - 8 Quill diameter/travel 65/120 mm Weight 2200 kg