Shri Aerospace

Condition: used, Year of construction: 2013, HAAS - OM-2A - 2013 - working hours less than 1400 - very good condition - 5 axis - X/Y/Z=305/254/305 mm - table 508x254 mm - max table load 68 kg Ksdpfxoyl Iz Ss Ab Tjln - spindle RPM 30000 - spindle motor 3,7 kW - spindle taper ISO 20 - ATC 20 - weight 680 kg - including 20 tool holders

Condition: good (used), Year of construction: 2013, operating hours: 59,000 h, functionality: fully functional, Universal machining center DMU 60 eVo Travel X/Y/Z: 600 / 500 / 500 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 80 m/min Rapid traverse Z-axis: 50 m/min Speed range (standard): 20 – 14,000 rpm Motor spindle (power): 18.9 / 14 kW (40/100% duty cycle) Tool holder (standard): SK40 according to DIN 69871 NC swivel rotary table: yes Clamping surface (table): 600 × 500 mm Swivel range B-axis: −5° to +110° C-axis: 360° Loading weight: 400 kg Direct measuring systems: equipped (direct measuring systems / direct length measuring system) Table cooling: incl. table cooling (mentioned in connection with direct measuring systems) Spindle speed (option): 20 – 18,000 rpm (for tool holder HSK-A63 according to DIN 69893) Adjustment of working spindle and tool magazine: deviating from standard Spindle speed (max., further data sheet screenshot): 24,000 rpm Tool magazine (standard): chain magazine, 30 positions, double gripper Tool magazine (option): tool magazine with 60 positions, chain magazine with double gripper (deviating from standard) CNC control (3D control): Heidenhain iTNC 530 HSCI Operating interface: SmarT.NC Control panel: DMG ERGOline® Control Display: 19" monitor (for ERGOline Control) Heat exchanger: for spindle and table Active cooler: for control cabinet Full enclosure: yes Signal/indicator light: four-color (also noted under automation) Measuring probe: infrared probe, Heidenhain TS 649 DMG Preparation for 3D quickSET toolkits: available 3D quickSET software option: included (for one machine each) 5-axis machine configurations: only in conjunction with probe option Preparation for handling system: PH 150-8 of DMG Automation (preparation mentioned) Chip conveyor: scraper belt chip conveyor with cleaned gap screen Internal coolant supply (IKZ): available Paper strip filter: 40 bar / 23 l/min / 600 l tank Rotating viewing window: incl. rotating viewing window Purge air: available Linear measuring systems: available Bed flushing: available Flushing gun for chip removal: available Blow air through spindle center: selectable via M function Compressed air quality: maintained air with low oil content Power failure safety package: available Surge protector: available Undervoltage monitoring: with fast braking control Operating mode: 4 Process monitoring: during production Documentation: Documentation-1 German Screen texts: German/English DMG / MORI SEIKI Messenger (promotional offer): Connection of the first machine (SIE 840D; HDH iTNC530; HDH MillPlus iT) DMG Netservice – client: "Green light for your machine"; installation on external PC Automation PH 150-8 with handling system and pallet magazine Automation design: System in automation design, matching the machine Rotary pallet storage: with 8 pallet positions Kodpfx Asyl A Dnob Tjln Servo axes: 2 servo axes (X-axis, magazine table) Z-axis: pneumatic Gripper: grab arm/fork Basic programming: System basic programming IPC: IPC with touch panel Job manager: DMG AUTOMATION Job manager Operator guidance: graphic-based operator guidance Signal light: 4-color PH 150-8 integration kit: for DMU 50/70, DMU 40/60/80 eVo linear UPC P chuck: Erowa (UPC P chuck, Erowa) UPC pallets: 320 × 320 mm, incl. clamping pins and pallet coupling, Erowa

Condition: good (used), travel distance X-axis: 1,080 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, In working condition Kjdpfeylvb Hjx Ab Toln

Condition: used, Year of construction: 2005, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2005 Control : Heidenhain iTNC 530 Speed : 10000 rpm Movement X/Y/Z : 500/450/400 mm Tool holder : SK40 Spindle: Speed:10.000 rpm Power (max.):13 kW Torque (max.):82 Nm Taper:SK 40 Kodpeylrnpjfx Ab Tjln NC-Swivelroundtable: B-Axis:-5°/+110° C-Axis:360° Clampingsurface:ø630 x 500 mm Tableloading (max.):200 kg : In general: Toolmagazine:16 Stations Rapid travers in X/Y/Z:12m/min Equipment/Accessory: Positionsensor:Direct scales in X/Y/Z Chipmanagement:Chip tray Coolingmanagement:Coolant pump Setup operations:Electronic handwheel Processobservation:Operation mode 4 Further Accessory:Rinsing pistol

Condition: reconditioned (used), Year of construction: 2016, With Siemens 840 D sl Operate CNC control Year of manufacture: 2016 Travel ranges: X 400 Y 400 Z 375 mm Spindle speed range: 20 – 20,000 rpm, stepless Including the following accessories: NC rotary tilting table 450 mm x 400 mm incl. table cooling 60-position tool changer with double gripper (HSK 63) 3D touch probe Heidenhain Electronic handwheel ICS 40 bar with paper band filter Scraper-type chip conveyor Bed flushing Active cooler for control cabinet Kodpfeylpa Njx Ab Tjln Spindle cooling: water circulation cooling Rotoclear Direct path measuring system Blow air through the spindle center 3 height-adjustable machine feet Operating manuals

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, Vertical Machining Center Manufacturer: DMG Model: DMU 80 P duoBLOCK Kodpfx Aeyli N Dob Tsln Year of manufacture: 2005 Control: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travel paths X: 800 mm Y: 800 mm Z: 800 mm Tool changer: 40 stations Spindle speed: 18,000 rpm Chip conveyor: Yes Internal coolant supply: Yes Weight: approx. 14,000 kg - Universal milling head with controlled B-axis - HSK 63 - Heidenhain TS641 probe - NC rotary table Ø 900mm x 700mm, permissible load 1,400 kg - New motor spindle in December 2025 - B-axis new + wear parts replaced in 2024 - C-axis new + wear parts replaced in 2023 Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2016, 5-Axis Universal Machining Center DMG Mori ecoMill 50 Control: Heidenhain TNC 620 Year of manufacture: 2016 Travels: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: °-5/+110 C-axis: °360 Clamping surface rotary axis: Ø 630 x 500 mm Spindle interface: SK 40 Tool magazine: 32 slots Klodpfxeyk T Inj Ab Ton Speed: 12,000 rpm Internal coolant – 12 bar high-pressure pump Accessories: Chip conveyor 3D infrared measuring probe Table probe

Condition: excellent (used), Year of construction: 2019, CNC universal lathe Spinner TC 800L 110MCY Control: Siemens Sinumeric 840D E Year of manufacture: 2019 X-axis travel: 360 mm Y-axis travel: 120 mm Z-axis travel: 1,580 mm Turning diameter: 500 mm Turning length: 1,580 mm Bar capacity: 85 – 175 mm Spindle bore: 110 mm Tool turret: 12 positions Tool holder: BMT65 Accessories: - Tailstock - Heidenhain measuring system - Multifunctional handwheel - Chuck SMW KNCS 325 - SMW hydraulic steady rest - Chip conveyor - High-pressure pump 15 bar - Touch probe - Extraction unit Ksdpfsyk Txmsx Ab Tjln - Tool package

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Manufacturer: DECKEL MAHO Kedpeyk S Hpofx Ab Teln Model: DMU 70VL Year of manufacture: 2001

Condition: used, Year of construction: 2007, x-travel 500 mm y-travel 420 mm z-travel 380 mm Control Heidenhain TNC 530 max. turning speeds 20-18000 min/-1 tool taper SK 30 table surface area 800 x 480 mm max. table load 500 kg number of tool places 32 Pos. max. tool length 280 mm max. tool weight 6 kg rapid traverse 50 m/min feed speeds 20 m/min weight of the machine ca. 5700 kg dimensions of the machine ca. 6,6 x 5,4 x 3 m total power requirement 45 kW Number of working hours 24.437 h spindle hours 9.874 h Number of axles 5 St. 5-axis Milling Center Deckel Maho DMG 50 eVo linear, built 2007 Attachment: 10 off SK30 tool holder Note: The control system occasionally switches to EMERGENCY STOP due to a Kjdpfxjyk H Nrj Ab Tsln hydraulic fault. This is probably due to the control system and not the hydraulic unit or hoses, as there are no leaks. The supplier expects that a minor repair will suffice.

Condition: good (used), Year of construction: 2014, Parts shown by hand not come. Klodjyk E Dbspfx Ab Tsn Technical data shown on pictures.

Condition: excellent (used), AUTOMATIC PRODUCTION LINE FOR HIGH-VOLUME WOUND ROTOR MANUFACTURING IN EXCEPTIONAL WORKING CONDITION CAN BE INSPECTED UNDER POWER INSTALLED IN ITS ORIGINAL OPERATING POSITION SHUT DOWN FOR REPLACEMENT WITH ANOTHER LINE DUE TO PRODUCT RANGE CHANGE Kledjykz T Sspfx Ab Ton IDEAL FOR COMPLETE PURCHASE IN CURRENT CONFIGURATION CAN ALSO BE PARTIALLY ACQUIRED (SUBJECT TO RELEVANT DISCUSSION)

Condition: excellent (used), Year of construction: 1997, Heidenhain Mill-Plus control system Travel ranges X/Y/Z: 500 x 380 x 380 mm Clamping surface: 500 x 400 mm Tool magazine for 24 tools, SK 40 Spindle speed: 8,000 rpm NC rotary and tilting table Kjdpfx Aoykuwweb Teln Chip conveyor

Condition: excellent (used), Year of construction: 2011, FOR SALE 5-AXIS Machining Centre Model: DMG SAUER ULTRASONIC 20 LINEAR Year: 2011 Configuration: Complete machine with robot To complete the technical file, could you please specify the following characteristics: - Table capacity / Axis travel (X × Y × Z): [e.g., 800 × 500 × 500 mm] - Payload / Max. table load: [e.g., 1,200 kg] - Accepted raw workpiece dimensions: [e.g., Ø 500 mm / 700 × 500 mm] Kjdoyi Tpiopfx Ab Tjln - Spindle power / Torque: [e.g., 18 kW, 200 Nm] - Robot capacity (Payload / Reach): [e.g., 10 kg, reach 1,200 mm] - Ultrasonic machining capability: [Amplitude, frequency, compatible tools] SIEMENS CNC Awaiting your response, I remain at your disposal for any further information.

Condition: like new (used), Year of construction: 2010, operating hours: 32,498 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece width (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, overall weight: 5,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center bar: 40 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Kedpfx Abeyi Dnij Tsln Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: like new (used), Year of construction: 2012, operating hours: 24,864 h, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: Heidenhain iTNC 530, workpiece diameter (max.): 380 mm, workpiece weight (max.): 2,500 kg, total height: 2,480 mm, total length: 1,970 mm, total width: 2,730 mm, overall weight: 6,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2012 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 400 Y-axis travel mm: 400 Z-axis travel mm: 375 C-axis degrees: 360º (0,001) B-axis degrees: -5º / +110º Distance spindle nose - table surface mm: 125-500 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Milling/turning table nc: Table dimensions mm: 450x400 Maximum workpiece size (D x H) mm: Ø380 Max. workpiece weight kg: 250 Table rotation speed rpm: 1200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center bar: 40 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 Equipment Chip conveyor Infrared probe Rinsing gun Klsdpfx Asyi Am Djb Tjn blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter 3D quickSET Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 46650 Spindle Working: 24864 Rated power kVA: 46 Basic machine dimensions / weight Length mm: 1970 Width mm: 2730 Height mm: 2480 Weight kg: 6900

Condition: good (used), Year of construction: 2006, 2006 Deckel Maho DMU 125 FD duoBLOCK 6-Axis Universal Turn/Mill Machining Centre with Siemens Control 'T' Slotted Table Ø1,250 x 1,100mm (11 'T' Slots). Maximum Table Load 2,000kg. Axis Travel 'X'=1,250mm, 'Y'=1,000mm, 'Z'=1,000mm, 'A'= +180/-30°, 'B'=360°. Rapid Traverse 60m/min. Table Turning Speed Range 20-500rpm. Maximum Spindle Speed 10,000rpm (59kW Motor). 60 Position ATC. Spindle Taper HSK A100. S/No.1163 000011 3 (2006). The machine is available due to new capital investment and must be removed by 27 April 2026. Please note that the buyer will be responsible for providing suitable lifting and transport brackets for removal. Kledpfoyim H Eox Ab Ton With Dual Auger To Chip Conveyor, Spindle Inspection Probe Interface, Blum Laser Tool Setter, Paper Filtration Through Spindle Coolant System, Chiller Unit, Losma Darwin 3000 Mist Extractor Unit & Handwheel.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, DMU 35 M Machining Center Year of manufacture: 2001 Heidenhain control Fully functional X: 350 mm Y: 240 mm Z: 340 mm C: 360° manual B: +105° / -15° manual Without vise Kjdpsyh Ruqofx Ab Teln Loading possible Available promptly

Condition: used, Year of construction: 2001, Manufacturer: DECKEL MAHO (DMG) Model: DMU 70 VL Year of Manufacture: 2001 Control Unit: HEIDENHAIN TNC 430 Machine Type: 5-Axis Universal Machining Center Working Range / Travels: X-axis: 710 mm Y-axis: 520 mm Z-axis: 520 mm B-axis (Swivel range): -10° / +95° (NC-controlled) C-axis (Rotary table): 360° (NC-controlled) Work Table: Table Type: NC Swivel-Rotary Table Clamping Surface: Ø 700 x 500 mm Max. Table Load: 350 kg Milling Spindle: Max. Spindle Speed: 12,000 RPM (Motor Spindle) Drive Power (40% / 100% ED): 15 kW / 10 kW Tool Taper: SK 40 (DIN 69871) Tool Changer: Magazine Positions: 30 slots Max. Tool Diameter: 80 mm / 160 mm (with empty adjacent pockets) Max. Tool Length: 315 mm Max. Tool Weight: 6 kg Feed Rates & Motion: Rapid Traverse (X/Y/Z): 30 m/min Max. Feed Rate: 20,000 mm/min Weight & Footprint: Machine Weight: approx. 5,500 kg Total Power Requirement: 40 kVA Space Requirements: approx. 4.0 m x 3.0 m x 2.8 m Kljdpfoyh Nm Sox Ab Ton Equipment & Features: High-End Control: Heidenhain TNC 430 5-Axis Capability: Full NC swivel/rotary integration.

Condition: used, Year of construction: 1975, Deckel LKS coordinate grinding machine from workshop liquidation. Function not tested. Kljdpfx Aboyhxcpo Tjn

Condition: good (used), Year of construction: 2002, 4-axis machining centre DECKEL MAHO DMU 80 T, No. 1113000335 3, year of manufacture: 2002, machine hours: 74,780 (spindle: 41,245), travel distances XYZ = 880 x 630 x 630 mm, HEIDENHAIN control, chip conveyor, filtration system Kjdpfx Asyhqz Hjb Teln

Condition: good (used), Year of construction: 1999, 5-axis machining center DECKEL MAHO DMU 125 P, no. 1098 000101 3, year of manufacture 1999, machine hours: 93,440 (spindle: 51,147), travels XYZ = 1,250 x 880 x 800 mm, HEIDENHAIN control, tool changer, chip conveyor Kodjyhqzyopfx Ab Toln

Condition: good (used), Year of construction: 2000, 5-axis machining centre DECKEL MAHO DMU 200 P, No. 1099 000054 3, year of manufacture 2000 (complete overhaul in 2024), machine hours: 22,852 (spindle: 77,915), travels XYZ = 1,800 x 2,000 x 1,100 mm, HEIDENHAIN control, tool changer, with filtration system. Kledjyhqzmopfx Ab Tsn

Condition: used, Year of construction: 2007, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,500 mm, total length: 4,500 mm, total width: 4,000 mm, table load: 800 kg, rotary table diameter: 700 mm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG / Deckel Maho 5-axis machining centre with Heidenhain iTNC 530 control. The machine features a 5-axis simultaneous machining concept with swivelling B-axis (+30° / −120°) as well as an integrated NC rotary table (C-axis, 360°) and is designed for complex and precise machining operations. Kljdpeyhn A Ujfx Ab Tjn Equipped with a main spindle with HSK-A63 tool interface and a 32-position tool magazine for flexible manufacturing applications. Suitable for tool and mould making, contract manufacturing, as well as general precision machining.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2010407, travel distance X-axis: 320 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 320 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 40,000 rpm, TECHNICAL DETAILS Travel distance X-axis: 320 mm Travel distance Y-axis: 320 mm Travel distance Z-axis: 320 mm Number of axes (simultaneous): 5 Max. spindle speed: 40,000 rpm Max. workpiece length: 150 mm Max. workpiece width: 150 mm Max. workpiece height: 150 mm Max. workpiece weight on table: 20 kg A-axis: 360° B-axis swivel range: +/- 115° Number of tools in tool changer: 60 Tool holder: ISO V 30 Klsdpfsyhnygjx Ab Ten Feed rate: 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Connection: 50 Hz 3x 400 Volt Spindle motor: 11 kW Total power consumption: 35 kW Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,400 x 2,900 mm Machine weight: approx. 6,000 kg EQUIPMENT Set of tool holders Coolant unit Chip conveyor Lighting Coolant/mist extraction Switch cabinet air conditioning Status indicator lamp