Alekss

Condition: excellent (used), Frame Guillotine Valiani V110 Double mitre cuts at 45° Straight mitre cuts up to 90° Max. working width: 100 mm Mechanical feed of cutting unit Cedpfxexu Uh Ao Ah Uori CE certificate

Condition: used, Year of construction: 1999, This Stegmaier Maschinenbau KG - MITRE SAW is being auctioned online in our industrial/machinery insolvency auction for Wietec Fenster GmbH – machinery, workshop equipment, trailers. Cjdjxu Ttkjpfx Ah Ueri

Condition: used, Cutting height at 90°: 135 mm Cutting length: mm Mitre range horizontal: - Crodpfsxu Dhrex Ah Usi Mitre range vertical: -60° to +60° Roller conveyor / support table: no Saw blade diameter: Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Workpiece clamp: yes Spray device: yes Extraction port: 100 mm Machine length: Machine width: Weight: 110 kg

Condition: used, Year of construction: 1996, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Crsdoxu Dhxjpfx Ah Uji Extraction port: 100 mm Hold-down device: yes Machine length: Machine width: Weight: 300 kg

Condition: used, Year of construction: 1999, Under-table crosscut saw Quick Stop 160S Cjdpfx Ahsxuk Nps Ujri - Year of manufacture: 1999 - Pneumatic-hydraulic, NC and CNC controlled - With waste optimization - Dimensions: depth 800 mm, width 3000 mm; usable length 1800 mm - 7.5 kW motor - Control cabinet: 400 x 1200 x 600 mm - Weight: 90 kg - Connected load: 12 kW, 25A - Operating pressure: 6 bar, extraction with 2 ports 120 mm Ø Machine will remain in operation until week 48.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Motor power - 9 kW Two bump stops - One automatically lifted Powered infeed table Cutting width - approx. 70 cm Cutting height - 14 cm Infeed table length - 3 m Outfeed table length - 3 m Year of manufacture: 1998 380 V Csdpfx Ahsxugh Is Uori 1310 kg CE marking

Condition: good (used), Year of construction: 2004, Ma.-No. 04126, pneumatic, speed 2,900 rpm, saw blade Ø 450-550 mm, working height 800 mm, electric power 5.5 kW Crsdpfext Nwpjx Ah Uei +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 1997, Under-table cross-cut saw Crjdpfjxtwk Dsx Ah Uoi max. cutting width: 800 mm max. cutting height: approx. 150 mm saw blade: 550 mm with 2 roller conveyors, the right one with stop and measuring scale

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Working direction: from right to left. Automatic loading unit. Minimum workpiece length 600 mm (shorter workpieces can be placed directly on the machine infeed table). Model “Speed” (faster material loading, see PDF). Usable length 6000 mm. Cutting accuracy +/- 1.5 mm. Cutting range, see diagram (PDF). Motor 5.5 kW, saw blade ø 500, 3600 rpm. Electronic control CONTROL 6.0 / Windows. Full optimization with error correction. Waste disposal package. Outfeed table with integrated cross pushers 3500 x 1500 mm. PALETTI data connection for use with cutting lists issued in the office. Automatic labeling (PALETTI print manager). LAYOUT. See all technical features attached PDF. Cjdpfx Aextmwmeh Usri

Condition: excellent (used), Catalogue number 7800 TECHNICAL DATA - Max. blade diameter: 400 mm - Blade guard - Blade bore diameter: 80 mm - Max. workpiece diameter with 400 mm blade: 130 mm - Motor: 9.2 kW Crjdoxr Dd Ijpfx Ah Uoi - Feed motor: 4×0.3/0.45 kW - 2 feed speed options - Material clamps: 6 pcs (including one pneumatically adjustable) - Dimensions (L/W/H): 4650x1120x1280 mm - Weight: approx. 1000 kg ADVANTAGES – for palisade production – easy to operate – used saw, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR based on exchange rate 4.2 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: used, Year of construction: 1999, functionality: fully functional, Cutting height / blade projection: 115 mm Main / scoring blade diameter: 400 / 160 mm Main / scoring blade speed: 3900 / 6300 rpm Codpfxsxq Hhte Ah Uori Main motor power: typically 15 kW (depending on configuration, 9/11/15/18 kW available) Scoring motor power: approx. 1.8 kW Number of grippers: 7 Front air-cushion tables; scoring unit included as standard Machine dimensions (approx.): 5000 × 7500 × 1800 mm Machine weight (approx.): 8000 kg Our machine variant is equipped with a loading platform.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 035-110235, saw blade diameter: 650 mm, cutting height (max.): 245 mm, rotational speed (max.): 2,800 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 650 mm Maximum cutting height: 245 mm Speed: 2,800 rpm Bore diameter: 30 mm Riving knife thickness: 5.4 mm Kerf width: 13 mm Saw blade height at 90 degrees: 245 mm Saw blade height at 45 degrees: 164 mm Saw blade height at 30 degrees: 113 mm Type of input power: Three-phase MACHINE DETAILS Motor power: 10 kW Motor speed: 3,000 rpm Electric saw blade tilt: 90° - 30°, with digital display Rotary table range: 30° - 150° Electrical Data Phases: 3 + N + PE Voltage: 400 V Frequency: 50 Hz Current consumption: 17 A Csdpfx Asxpvtieh Ueri EQUIPMENT Automatic guarding hood Pneumatic cross feed Laser for length cutting

Condition: good (used), Year of construction: 1991, max. cutting length 510 mm saw blade diameter 450 mm 4 kW motor roller tables with stop on both sides, each 2 m long Crodpfx Ahjxpi Ugs Uei

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Technical specifications: • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg • Cutting accuracy: +/- 2 mm • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) • Safety system and SICK brand sensors Csdpsxn Rt Uefx Ah Usri Warranty: 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Crjdpfx Ahsxnlgcs Uoi

Condition: used, cutting width max. 250 mm Cutting height max. 80 mm Saw blade diameter 400 mm Motor output 3,0 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +-20 mm mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw ----- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. Crjdoxmk Ddjpfx Ah Usi The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 400 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section max. 220x80/ 250x50 mm Saw blade motor power: 3.0 kW Saw blade diameter: 400 mm Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Crjdpfexiza Uox Ah Uji

Condition: like new (used), electronic adjustment of blade tilt 90° – 45° maximum cutting width: 650 mm electronic adjustment of saw height automatic material feed Credpfx Ahexfr Eto Uoi touch control panel laser rotating work table 0° – 345° maximum blade diameter: 800 mm motor power: 16.6 kW year of manufacture: 2016 CE marked 400 V

Condition: used, Year of construction: 1997, cutting height at 90°: 170 mm cutting length: 410 mm miter vertikal: -60° bis +60° sawblade diameter: 420 mm speed: 2800U/min motor power: 2,2 kW motor brake: yes suction connection: 100mm machine length: 1,20 m machine width: 0,7 m Maschinenhöhe: 1,50 m waight: 110kg Crjdpfjxc Hkfex Ah Uji

Condition: used, Year of construction: 1999, Cutting height at 90°: 135 mm Cutting length: mm Saw blade swivel and tilt: yes Vertical miter range: -60° to +60° Roller conveyor / support table: no Saw blade diameter: Codsxc Hklopfx Ah Usri Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Extraction connection: 100 mm Machine length: Machine width: Weight: 110 kg

Condition: excellent (used), IM Very good condition. Crodpfx Aoxcll Ush Uji

Condition: excellent (used), Year of construction: 2021, operating hours: 80 h, functionality: fully functional, machine/vehicle number: Stromag CT 600 F, saw blade diameter: 600 mm, cutting height (max.): 410 mm, feed length X-axis: 7,000 mm, feed rate X-axis: 90 m/min, cutting width (max.): 250 mm, total length: 12,000 mm, overall weight: 2,700 kg, type of input current: three-phase, workpiece weight (max.): 80 kg, cutting length (max.): 6,600 mm, air demand: 350 m³/h, input voltage: 400 V, extraction connection diameter: 110 mm, spindle motor power: 7,500 W, main saw diameter: 600 mm, saw blade speed: 2,560 rpm, operating pressure: 6 bar, Keveset Használt.Maró állomás is van benne. Cedpfx Ajxcihgjh Usri

Condition: like new (used), Year of construction: 2020, functionality: fully functional, saw blade diameter: 550 mm, cutting height (max.): 210 mm, overall weight: 220 kg, Radial arm saw Harwi 625 - H - 2K Cutting height: 210 mm Radial cutting length: 1250 mm Motor power: 5 kW (heavy-duty brake) Cedsxcat Topfx Ah Uori Saw blade: 550 mm Extraction connection: 1x 120 mm + 1x 80 mm The machine has not been extensively used and is in technically and visually excellent condition. The machine can be demonstrated. The machine will remain in use for a project until November. Both tables (front and rear) are also for sale. The tables are fitted with ball rollers and are mobile.

Condition: used, Year of construction: 2025, Neue Ausstellungsmaschine! Partnership Edition, inkl.: - 1 Meter Rollenbahn rechts von der Säge, mit verzinkten Rollen. - 1 Meter Rollenbahn links von der Säge, mit verzinkten Rollen. - 1 Stück pneumatisch wegschwenkbarer Anschlag mit 200 mm Länge und Bedienschalter am Sägegestell SICHER - SOLIDE - SCHNELL Die kompakte, einfache, robuste und innovative Maschine garantiert maximale Sicherheit, Flexibilität und Zuverlässigkeit. Standardzubehör: - Automatische Schutz- und Andruckvorrichtung - Ergonomisch positionierte 2 Hand Steuerung - Schutzschild, starr Tragfähigkeit 230 kg, Durchmesser 60 mm, Abstand 250 mm, Breite 350 mm. Einschließlich hinteres 100 mm hohes Anschlaglineal. Tragfähigkeit 230 kg, Durchmesser 60 mm, Abstand 250 mm, Breite 350 mm. Einschließlich hinteres 100 mm hohes Anschlaglineal mit Skala. - 1 Stück HM Sägeblatt 500 mm, Z = 108 Technische Daten: Maximaler Schnittbereich: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Sägemotor: 5,5 kW Sägeblattdurchmesser: 500 mm Drehgeschwindigkeit: 2.800 U/min. Druckluft: max. 8 bar Luftverbrauch pro Zyklus: 5 Nl Absaugstutzen: 1 x 120 mm / 1 x 100 mm Codpfx Ahow Tfzlo Usri Spannung: 400 V / 50 Hz / 3 Ph. Arbeitshöhe: 900 mm +/- 20 mm Mindestabstand zwischen Anschlag und Sägeblatt: 70 mm Mindestabstand zwischen 2 Anschlägen: 60 mm

Condition: used, Year of construction: 2022, Heavy duty rack and pinion push feed system 6000 mm in feed capacity Ø600 saw blade 10 hp saw motor Automatic angle setting (+70 - 70 degrees ) Vertical Clamping Horizontal clamping Electrically interlocked safety hood Touch screen controller 12" colour display Full optimisation 1000 mm out feed table Codpow Tar Eefx Ah Ueri