VIZOSTEEL machinery s. r. o.

Condition: ready for operation (used), Year of construction: 2002, Movement X-Axis Movement 700 mm Y-Axis Movement 550 mm Itjdjxx Dw Ijpfx Aaaop Z-Axis Movement 500 mm This 3-axis DECKEL MAHO DMC 70 V was manufactured in 2002. It features a 30-position tool changer, a spindle speed of 18,000 rpm, and a chip conveyor. The control system is a TNC 430. Note: tool keys in Z direction are defective. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 70 V machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: reconditioned (used), Year of construction: 2007, CNC Vertical Machining Center DECKEL MAHO DMC 70 eVolution With Heidenhain iTNC 530 path control system Year of manufacture: 2007 Travel paths: X 750 Y 600 Z 520 Speed range: 0 – 18,000 rpm, stepless (SK 40) Including the following accessories: 2-axis NC swivel rotary table, 700 mm x 500 mm clamping surface 2-station pallet changer Vertical tool changer with 92 magazine slots (SK 40) Full enclosure with sliding doors and internal lighting Electronic handwheel 3D probe Heidenhain TS 640 Tool measurement in the work area (BLUM laser) Operating modes 3 + 4 IKZ 40 bar (internal coolant supply) Rotoclear (camera or viewing system) Chip conveyor Coolant system Chip flushing gun Isdpfx Ajxxyd Djaastp 4 height-adjustable machine feet Operating manuals

Condition: used, x-travel 760 mm y-travel 410 mm z-travel 500 mm Itsdpfoxxb I Djx Aaajp

Condition: used, Year of construction: 2001, x-travel 760 mm y-travel 510 mm z-travel 610 mm Control Ultimax Itjdpfjxxb Iqjx Aaaop max. turning speeds 10.000 min/-1 tool taper SK 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2011, Traverses X Y Z: 762 x 406 x 508, Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Spindle Motor 30Hp Itjdjxwyuajpfx Aaaep HAAS Control, 24 Station ATC, Programmable Coolant nozzle, WIPS, Low Volt light, 2 axis trunnion table 160mm.

Condition: like new (used), Year of construction: 2015, operating hours: 26,915 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 30 kVA, controller manufacturer: M-730UM, workpiece weight (max.): 1,000 kg, total height: 2,800 mm, total length: 3,300 mm, total width: 3,000 mm, table width: 600 mm, table length: 1,100 mm, spindle speed (min.): 8,000 rpm, Year of construction: 2015 CNC controller: M-730UM Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 Iedpfx Aasxwxc Aeaetp With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Weight kg: 6870

Condition: excellent (used), Year of construction: 2007, Okuma MB-46VAE Machining Center Year of manufacture: 2007 Control: OKUMA OSP P200-M Table size: 1000 x 460 mm X travel: 762 mm Y travel: 460 mm Z travel: 460 mm Table load capacity: 700 kg Spindle cooler Taper: MAS BT40 Iodpfxexwtp De Aaaetp Magazine with 42 tool stations Weight: 6500 kg Dimensions LxWxH = 2750 x 2160 x 2715 mm

Condition: excellent (used), Year of construction: 2007, Vice NOT included Itedpfx Aaoxwlx Deaep Comes with a small selection of tooling. X Axis Travel - 660mm, Y Axis Travel - 356mm, Z Axis Travel - 457mm, Max Table Load - 340kg, Spindle Motor - 10HP, Spindle Speed - 8000RPM, Spindle Taper - 40CT, Tool Changer - 20ATC

Condition: like new (used), Year of construction: 2013, functionality: unexamined, machine/vehicle number: 94337, Never used. Stored in dry conditions. Itodpfexwb Hksx Aaaop

Condition: good (used), Year of construction: 2011, Traverses XYZ: 700 x 530 x 560mm, table size 900 x 500mm, Heidenhain TNC620 Control, BT40 spindle taper, 24 station tool changer, Spindle speed 9,000rpm, Spindle motor power 18.5kW, Through Spindle Coolant, Iedoxv S Ngopfx Aaaotp Low volt light, 4th Axis Rotary Table

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, BOB-Mill M8 Model/Mold Making Engraving and Milling Center in Gantry Construction TECHNICAL DETAILS X-axis travel: 700 mm Itjdpfx Ajxv Su Nsaajp Y-axis travel: 800 mm Z-axis travel: 330 mm Spindle speed: 27,000 rpm Control unit: Mitsubishi E 80 Spindle nose to table: 110 – 440 mm Door width: 760 mm Worktable size: 800 x 600 mm Table load capacity: 400 kg Number of T-slots: 5 T-slot size: 18 mm T-slot spacing: 115 mm Spindle taper: BT30 12-position tool changer Feed rate: 0–10,000 mm/min Rapid traverse X / Y / Z: 15,000 mm/min Positioning accuracy: ± 0.005 / 300mm Repeatability: ± 0.003 mm MACHINE DETAILS Spindle motor power: 7.5 kW 3-axis motor power X / Y / Z: 1.5 x 1.5 x 1.5 kW Machine weight: 4,300 kg Dimensions: 2,000 × 2,500 × 2,400 mm

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 4460 mm Measurements depth 2250 mm Measurements height 3550 mm Machine weight 12000 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Itsdsxv E Ayspfx Aaaop Main Drive Number of axis 5 Movement X-Axis Movement 750 mm X-Axis Rapid Traverse 25 m/min Y-Axis Movement 500 mm Y-Axis Rapid Traverse 25 m/min Z-Axis Movement 600 mm Z-Axis Rapid Traverse 20 m/min Additional Equipment Incl. swivel/rotary table SRTA 2-300 for 5-axis machining This 5-axis AXA DBZ vertical machining center was manufactured in 2012. It features a Heidenhain iTNC 530 system, a spindle speed of 10,000 rpm, and a tool magazine with 22 positions. The machine includes a swivel/rotary table SRTA 2-300 for 5-axis machining. Consider the opportunity to buy this AXA DBZ vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2017, Vertical machining center, Haas, model VF-2, year of manufacture 2017. Maximum spindle speed: 10,000 rpm, X-axis travel: 762 mm, Y-axis: 406 mm, Z-axis: 508 mm, tool magazine for 20 tools, worktable: 914 x 356 mm, pallet storage with robot. Iedpfxjxv D Egj Aaaetp

Condition: excellent (used), Year of construction: 2022, operating hours: 1,103 h, functionality: fully functional, machine/vehicle number: 1194909, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, nominal power (apparent): 30 kVA, workpiece length (max.): 762 mm, workpiece width (max.): 457 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 680 kg, total height: 2,600 mm, total length: 2,540 mm, total width: 2,260 mm, overall weight: 3,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, spindle nose: (maximaal) 610 mm (minimaal) 102 mm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Haas VF-2SSYT CNC Vertical Machining Center – Super Speed Edition Very clean Haas VF-2SSYT for sale, used approximately 99% for aluminum machining only. Super Speed version with extended Y-axis – ideal for precision work and high production speed. Includes: ±40 toolholders with various end mills, drills, and taps Renishaw probe (automatic tool and workpiece measurement) 2 machine vises Machine is in excellent condition and ready for immediate use. Itjdpjxv A Aqefx Aaasp

Condition: used, Year of construction: 2007, Doosan ACE-HM630 Horizontal Twin Pallet Machining Centre. Serial No. HM630262 (08-2007) with Fanuc Series 18i-MB Control, Pallet Size, 630mm x 630mm, Travel X/Y/Z = 1000/800/850mm, Full B Axis, 40 Position ATC, Spindle Taper ISO50, High Pressure Coolant, Filtermist Itodpfxsxvz Ufj Aaaop Location: These lots are located in Middlesborough, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC Control: BROTHER CNC Storage location: Halberstadt Itsdpsxvw Hdofx Aaaep Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 5000 kg Measurements height 2747 mm Measurements depth 2439 mm Main Drive Spindle Speed 12000 RPM Spindle motor power 13.5 kW Tool taper SK 40 Number of axis 3 Control Unit Brand HURCO Model WINMAX GEN 5 Movement X-Axis Movement 760 mm Z-Axis Movement 610 mm Y-Axis Movement 510 mm Dimensions Machine Length 2180 mm Table Table Width 1020 mm Table Length 510 mm Isdoxvt Ahspfx Aaastp Table load 1350 kg Tools Slots in storage 40 Max weight 7 kg Media Internal cooling yes This 3-axis Hurco VMX 30i was manufactured in 2014. It features a 760x510x610 mm working envelope, a 1020x510 mm table, and a high-speed spindle at 12000 rpm with SK40 taper. The machine includes a 40-piece tool changer and a chip conveyor. Renishaw probes enhance precision. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 30i machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 5000 kg Measurements height 2747 mm Measurements depth 2439 mm Main Drive Number of axis 3 Spindle Speed 12000 RPM Spindle motor power 13.5 kW Tool taper SK 40 Control Unit Brand HURCO Model WINMAX 5 GEN Movement X-Axis Movement 760 mm Z-Axis Movement 610 mm Y-Axis Movement 510 mm Dimensions Machine Length 2180 mm Table Table Width 1020 mm Table Length 510 mm Table load 1350 kg This 3-axis Hurco VMX 30i was manufactured in 2018 and features a robust vertical machining center design. It boasts a spindle speed of 12000 rpm, a spindle motor power of 13.5 kW, and a tool changer with 30 pcs capacity. The machine dimensions include X=760 mm, Y=510 mm, and Z=610 mm, with a table size of 1020x510 mm. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 30i machine we have for sale. Contact us for more information. Itodpfxsxvt Abo Aaaop Application Types Milling

Condition: good (used), Year of construction: 2016, HURCO CNC Machining Centre VMX 24 i Travels X-axis (mm): 610 Y-axis (mm): 508 Z-axis (mm): 610 Main Spindle Spindle taper (DIN 69871): SK 40 Max. spindle speed (rpm): 12,000 Max. spindle power (kW): 9 Max. spindle torque (Nm): 95 Feed Ijdpfx Aajxvtihjaetp Rapid traverse X/Y/Z-axis (m/min): 38 / 38 / 32 Tool Changer Magazine positions / optional: 30 Max. tool diameter (mm): 80 Max. tool length (mm): 300 Max. tool weight (kg): 7 Additional Data Required installation space (mm) (doors open, incl. control unit and chip conveyor): 3,930 x 4,041 x 2,725 Machine weight (kg): 4,750 Coolant tank capacity (l): 367 Scraper belt conveyor: Standard Technical specifications subject to change without prior notice.

Condition: good (used), Year of construction: 2010, HURCO CNC Machining Center VMX 30 U with WinMax control Travel distances in mm: X-axis 1060 Y-axis 610 Z-axis 520 Integrated rotary and swivel axis: Coolant system Rinsing system to support chip removal Chip splash-guard enclosure Coolant spray gun Signal light for machine operating status Iedpfxjxvtf Ae Aaaetp Work area machine lamp Set of leveling pads Machine manual on CD includes: WinMax control 2 color screens (text + graphics) 2 software modules (1 x conversational programming at the machine + 1 x for ISO code programming via external programming device or CAD/CAM system through RS-232 C or V 24 interface)

Condition: good (used), Year of construction: 2011, HURCO CNC machining center VMX 60 t X-axis 1,500 mm Y-axis 660 mm Z-axis 600 mm Table size 1,680 x 660 mm Spindle speed 12,000 rpm Iodexvtfpjpfx Aaaetp Tool holder SK40 Tool changer, 24 positions Equipped with WinMax control Includes: Internal coolant system (IKZ) Spindle cooler Coolant spray gun Chip splash guard cabin Signal light for machine operating status Flushing system to assist with chip removal Machine lamp Set of machine leveling pads Machine manual on CD 2 color screens (text + graphics) Simulation graphics Tool and material library Detachable electronic handwheel Pocket milling with islands Synchronous tapping (thread cutting without compensating chuck)

Condition: excellent (used), XYZ 710 VMC Vertical Machining Centre, Table Size 800mm x 445mm (Vac Table not included) with Siemens Sinumerik CNC Control, 24 Tool ATC, BT40 Spindle Taper, 8000rpm Spindle Speed, Filtermist FX5002 Extractor. S/No. SMT00054 Delivery available on request, at extra cost. Itjdpfxsxvpffe Aaasp 14 day return or repair.

Condition: ready for operation (used), Year of construction: 2020, General Data Machine weight 6500 kg Main Drive Spindle speed range 12000 Tool taper ISO 40 Number of axis 5 Movement X-Axis Movement 730 mm Y-Axis Movement 450 mm Z-Axis Movement 470 mm Table Table load 200 kg Itsdpfxjxvfg Ss Aaajp Tools Number of index 48 This 5-axis Mazak CV5-500 was manufactured in 2020. It features a 500 × 500 mm table, can handle a maximum load of 200 kg, and offers X/Y/Z travels of 730/450/470 mm respectively. The spindle supports up to 12,000 rpm with a power of 18.5 kW. It includes a 48-position tool magazine and a machine weight of 6,500 kg. If you are looking to get high quality 5-axis machining capabilities consider the Mazak CV5-500 machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degree Itodjxva Ahepfx Aaajp C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.

Condition: good (used), Year of construction: 2012, Bridgeport XR 760 Machine 1 Year of manufacture: 2012, Control: Heidenhain iTNC 530, Travel X/Y/Z: 760/610/610 mm, Tool changer with 30 positions, SK 40 spindle taper, Spindle speed up to 12,000 rpm, Air blast through the spindle, Itsdpfxsxu U Tlo Aaasp Through-spindle coolant (20 bar), Clamping area table: 1000 x 600 mm, Max. table load: 700 kg, Scraper belt chip conveyor, 3D measuring probe, Tool setter, Infrared receiver, Cooler, Thermal compensation, New spindle 02/2024