Der Holzmeister

Condition: used, axle configuration: 3 axles, first registration: 02/2025, total length: 8,140 mm, total width: 2,550 mm, total height: 1,200 mm, tire size: 385/65R22.5, tire condition: 80 %, color: black, Year of construction: 2025, Equipment: ABS, Tire size: 385/65R22.5 Tire tread: 80% Rear axle 1: Reduction: single reduction Rear axle 2: Reduction: single reduction Rear axle 3: Reduction: single reduction Unladen weight: 3,310 kg Payload: 35,690 kg GVW: 39,000 kg Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for operation. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands Kodpfxjzvymyo Aiiedr - Phone: - Email: - Website:

Condition: used, Year of construction: 2003, functionality: unexamined, IRB 1400 M2000 industrial robot DEFECTIVE, SUITABLE FOR USE AS A SOURCE OF SPARE PARTS Serial No.: 14-26293, Robot version: IRB 1400 including ABB robot controller Model S4C IRB1400 M2000 Recorded operating hours: 58,159 hours Robot teach pendant Cable set Kdodezvymtopfx Aiisr MSA: Robot cable is porous - functional.

Condition: excellent (used), For sale: KSB ETABLOC G 40-200/1102 G4 centrifugal pump with an 11 kW electric motor. The pump is used, inspected, and in fully working condition. It was checked before being listed for sale. The visual condition corresponds to the photos – normal signs of use and storage are visible. Pump specifications: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 40-200/1102 G4 Flow rate Q: 20–60 m³/h Head H: 57–35 m Rotational speed: 2900 rpm Serial No.: 5-118-547 043/1 Motor specifications: Kedpezvymgofx Aiiedr Manufacturer: KSB / Klein, Schanzlin & Becker AG Motor type: ZKA 160 MK2 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2880 rpm cos φ: 0.9 Serial No.: 0-118-886321 Ident-No.: 00533537 Motor No.: 544077 Condition: used – inspected – 100% functional. This is the exact unit shown in the photos that is being sold.

Condition: not inspected (used), functionality: unexamined, Connection voltage: 400 V Refrigerant: 95g / R134a Kdodszvyl Nopfx Aiisr Compressed air supply: 5-8 bar Printer: Star DP8340S Year of manufacture: 08/2002

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Log yard with restacking unit Complete log handling system from the log receiving area to the transfer to the debarking line. The system performs automatic log handling, singulation, end trimming, metal detection, butt end reduction, debarking, 3D measurement, and sorting of the logs. Key technical data Kedpfx Aiozvyl Ajiedr Capacity: approx. 30,000 m³ of logs in a single-shift operation Log diameter: approx. 160–660 mm Log lengths: 4,000–5,250 mm Special lengths up to 6,100 mm Long logs up to approx. 20 m Herzog processor head with 55 kW hydraulic unit End trimming diameter up to approx. 700 mm Integrated metal detection Hobest Primus butt end reducer for log diameters up to 900 mm EWD ER 90 debarker with rotor opening 100–900 mm Rotor drive: 45 kW, frequency-controlled Feed speed during debarking up to 30 m/min Calibrated Microtec 3D log scanner Sorting block conveyor with five hydraulic discharge stations The restacking unit automatically returns, singulates, and realigns the logs for feeding to the debarking line. It consists of, among other things, an approx. 18 m long log handling conveyor, a four-stage inclined conveyor, a 90° curved conveyor, a double-strand block conveyor, a transverse conveyor, and an integrated log turner. The restacking unit can be purchased separately if required.

Condition: used, Year of construction: 2017, functionality: unexamined, The item consists of two related units and was operated as a stud welding cell. Lot 1 R+P Stud Welding Cell enclosed protective cell made of aluminum profiles safety enclosure with protective doors signal light integrated control cabinet documentation available suitable for automated stud welding processes Lot 2 Nelson Stud Welding Machine Manufacturer: Nelson Stud Welding Type: SD-FSE 1000S Year of manufacture: 2017 Serial number: 1739289 Part No.: 80-07-57 Kodpfjzvylpsx Aiijdr Technical data: Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2000 A (duty cycle 2%) Protection class: IP20 Polarity: STD Scope of delivery: Welding gun Connection cable Mobile equipment cabinet Both lots were last used together as an automatic stud welding system.

Condition: used, Used Oliver & Batlle approximately 1,400 litre capacity 304 stainless steel vertical reactor. Unit has welded dished top and bottom heads. Approximately 1,300mm diameter x 1,100mm straight side. Internal rated atmospheric design pressure at 50 deg.c. Has external half pipe coil stainless steel jacket rated 5 bar design pressure at 90 deg.c. Unit includes top entry stainless steel 2-tier agitator driven by 30kw motor.gearbox. Unit is mounted on side support lugs. Ksdpfxezvylij Aiiodr

Condition: used, Used Silverson model GX10/1500 V range stainless steel high shear mixer. Unit direct driven by approximately 7.5kw electric motor. Stainless steel mixing shaft measures approximately 1100mm long with 100mm diameter upwards facing general purpose disintegrating head. Kdjdpezvylcsfx Aiisr

Condition: used, Grecon Dimter Opticut 704 Optimizing Saw An optimizing saw for demanding applications. A continuous chain transport system with a flexible upper clamping device, from the measuring station to the saw, ensures safe transport of wood that is tapering, twisted, heavily rough after sanding, and prone to splitting. A servomotor with a planetary gearbox provides very high acceleration due to its low moment of inertia. Waste is blown to the side in the cutting area. Thanks to its special design with an aluminum casting and a pneumatically controlled saw swing, very short cutting times are possible. Kedpfozvyk Sex Aiiodr The output is approximately 12,000–17,000 running meters per shift, with maximum cross-sections of the material being processed ranging from 100 × 100 mm to 30 × 250 mm.

Condition: used, Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Manufacturer: Molteni. Material: Stainless steel. Capacity: Mixing pan approximately 700 litres. Type of blades: (1) high speed disperser driven by a 48kw motor, (1) high speed disperser driven by a 36.5kw motor and (1) anchor type agitator driven by a 18.5kW Exd rated motor. Also includes: Hydraulically operated raise and lower. Ksdpfjzvykxox Aiisdr For details about the refurbishment work, contact a member of our sales team.

Condition: used, Used Alfa Laval 4500 series model XMNX 4545 stainless steel decanter centrifuge. Bowl 450/258mm diameter X 1460mm long. Maximum solids density 1.2 kg/dm3. Bowl belt driven by 30 kW motor and gearbox at maximum 3250 rpm. Includes Netzsch type IE 50 BK stainless steel mono feed pump driven by 4 kW motor. Also includes spare stainless steel scroll. Design capacity 16 cubic meter/hour input with 0.5% dry solids and output with 5% dry solids. Mounted on frame with solids collection tank. Specifications: Material Of Construction: Stainless Steel Motor Power: 40.2 hp Max Bowl Speed: 3,250 RPM Kdjdpfx Aiezvykloisr Size: 4500 Conveyor Material: Stainless Steel Other Extras: Netzsch type IE 50 BK stainless steel mono feed pump

Condition: used, mileage: 30 km, power: 140 kW (190.35 HP), first registration: 06/2026, fuel type: diesel, empty load weight: 2,466 kg, maximum load weight: 1,034 kg, overall weight: 3,500 kg, wheelbase: 4,325 mm, color: white, number of seats: 3, loading space length: 4,810 mm, loading space width: 1,787 mm, construction height: 2,703 mm, working width: 1,993 mm, Equipment: air conditioning, airbag, central locking, cruise control, fog lights, sliding door, trailer coupling, Automatic transmission GTronic (9-speed), regulated air conditioning (Tempmatik), trailer coupling: electrical system for trailer socket, 3-button remote control for central locking, exterior mirrors electrically adjustable and heated – both, exterior mirrors electrically foldable, hill-start assist, driving assistance system: active lane keeping assist, driving assistance system: Attention Assist (fatigue detection sensor), speed limiter (cruise control), multi-function steering wheel, steering wheel (leather), reversing camera, solid bulkhead, spare wheel with road tires, windshield wipers with rain sensor, LED high-performance headlights, fog lights with cornering function, DAB tuner (digital radio), MBUX multimedia system (10.25-inch touchscreen), USB port centrally located under the dashboard (charging function only), smartphone integration (Apple CarPlay and Android Auto), Mercedes-Benz emergency call system, tire pressure monitoring system, heat-insulating glass (windshield with band filter at the top), driver's airbag, front passenger's airbag, seats in the cab: driver's seat with lumbar support, start/stop system, service booklet available, sliding door cargo/passenger compartment on the right, exterior mirrors with blind spot assist, exterior temperature display, preparation for navigation system (for MBUX multimedia system), paint: ARCTIC WHITE, seats in the cab: driver's seat with armrest, seats in the cab: driver's seat – low, ambient lighting in passenger/cargo compartment, front cup holders, auxiliary heater (air) electric, jack, rear lights partially LED, all-weather floor mats, radiator grille frame in vehicle color, comfort chassis, windshield washer system (wet wiper system), mud flaps front, mud flaps rear, connection strip for electrical connections (driver's seat), cable duct on side wall, cable duct on rear portal, hold function, charging package dashboard (USB connections and 12V socket additionally), spare wheel holder under frame end incl. jack, seats in the cab: comfort suspended seat – driver's side, truck registration, acoustic package, permitted total weight 3.50 t, noise reduction measures, towing eye rear, automatic activation of headlights, adaptive brake lights, marker lights on the side, communication module (LTE) for digital services, instrument cluster with color display, pre-installation for Remote Service Plus, driving assistance system: intelligent speed assistant, storage compartment below dashboard passenger side, entry handle on rear pillar rear right, entry handle for sliding door on bulkhead, seats in the cab: passenger double seat, rear door (opening angle 270 degrees), seat belt system with warning system (driver's side), seat belt system with warning system (passenger side), ceiling light in the cargo area with door contact, storage compartment above windshield, driving assistance system: active brake assist, driving assistance system: breakdown management, suspension: stabilization level I, steering wheel (steering column mechanically adjustable), driving assistance system: crosswind assist, absorbent glass mat battery 92 Ah, generator 250 A, fuel tank: main tank 93 liters, Pro, body/superstructure: high-roof box van, wheelbase 4325 mm, drive type: rear-wheel drive, over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed Kdjdpezvykfefx Aiisr

Condition: used, Used Westfalia model CSA1-06-475 stainless steel clarifier centrifuge. Self cleaning bowl in steam sterilizable design. Internal pressure rated 1.5 bar pressure at 127 deg.c. Capacity rated approximately 13 litre. Unit includes 1.5kw, 1415rpm drive. All mounted on skid. Includes tools Kodpfx Aiszvyi Ujijdr

Condition: used, Used Alfa Laval model PX60VGD-140G stainless steel separator centrifuge. Bowl speed max. 6240 rpm. Equipped with 18.5 kW/50 Hz/1500 rpm motor. Some tools available. New in 2003. Kdsdpfxezvyi Ie Aiisr

Condition: good (used), Year of construction: 2010, Used semi-automatic band saw from Bomar Type STG 440 DGH Kdodpfezvyizjx Aiijr Capacity at 90 degrees: ø 440 mm / flat: 610 x 440 mm Mitre cutting on two sides Includes a 6-meter infeed and outfeed conveyor with an analog measuring system (not shown in the picture).

Condition: used, Lead and feed spindle lathe, manufacturer Böhninger, type TV9815 with three-jaw chuck, tailstock, Multifix tool holder, machine lamp, and splash guard, suitable for general turning operations. Kdedpjzvyiujfx Aiior Technical data: Manufacturer: Böhninger Model: TV9815 Motor power: 11 kW Operating voltage: 400 V, 50 Hz, 3/N/PE Control voltage: 230 V AC, 24 V DC Control cabinet: Rittal, protection class IP65.

Condition: new, For sale is a NEW, unused KSB ETABLOC GN 40-125/402 G10 centrifugal pump with the original KSB electric motor. This is a stock item – the pump has never been used or operated. Due to long-term storage, there may be only minor signs of storage or transport. The pump is in very good, practically factory-new condition. The original KSB packaging, as shown in the pictures, is also available. Pump technical data: Manufacturer: KSB Model: ETABLOC GN 40-125/402 G10 Flow rate Q: 31.00 m³/h Head H: 25.45 m Rotational speed: 2950 rpm Ksdpfozvyinjx Aiiodr Year of manufacture: 2012 Mat.-No.: 01216137 Number: 9972270914 000100 01 CE marking Motor data: Manufacturer: KSB Power: 4.0 kW Voltage: 400 V Δ / 690 V Y Frequency: 50 Hz Speed: 2950 rpm Rated current: 7.8 A at 400 V Efficiency: 85.8% cos φ: 0.86 Protection class: IP55 Insulation class: 155 (F) Efficiency class: IE2 Design: IMV1 Made in Czech Republic Condition: NEW / UNUSED / STOCK ITEM The pump has never been used or operated. Any minor visual marks are solely due to storage and transport. The set being sold is exactly as shown in the pictures.

Condition: not inspected (used), functionality: unexamined, Universal tool milling machine Kdedozvyihjpfx Aiijr

Condition: good (used), Year of construction: 1987, Mikron WF2SA machining center with a 3-axis Heidenhain Aktiv digital control system. Fixed angular table, SK 40 spindle mount. Ready for operation. Machine can be demonstrated under power by arrangement. Kdedpszvyh Djfx Aiior

Condition: used, mileage: 671,300 km, power: 375 kW (509.86 HP), first registration: 04/2017, fuel type: diesel, empty load weight: 8,042 kg, overall weight: 18,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 2 axles, wheelbase: 3,800 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6c, suspension: steel-air, Equipment: ABS, AdBlue, EBS, additional headlights, cruise control, differential lock, electronic stability program (ESP), lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, retarder, traction control, Urea tank (AdBlue) Engine displacement: 12,902 cc Hydraulics (auxiliary drive) Distance warning system Compressor Low noise Alloy wheels Payload: 9,958 kg Automatic climate control Compressor RTI PULS SILENCER 550 Type CMAX 3 Sun visor Light bar Rotating beacon Ksdpfxozvyhwe Aiiedr Air horns 2 bunks Cooler box Errors and omissions excepted.

Condition: used, empty load weight: 7,020 kg, maximum load weight: 35,980 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 02/2023, loading space length: 13,510 mm, suspension: air, tire size: 445/45 R19,5, color: other, gearing type: other, front tire size: 445/45 R19,5, rear tire size: 445/45 R19,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Container closures, extendable, for 2 x 20 ft containers or 1 x 40 ft container, 4 x warning signs with lighting, omega floor with hardwood planks, aluminum rims, Alcoa Dura-Bright finish, front wall approx. 1,800 mm, pallet box for 24 Euro pallets, bracket for securing bars, 16 x bar pockets, 12 x securing bars, approx. 2 m long, new price was €49,000, -- subject to printing errors, mistakes and changes, sample images --, more information available at: !, More Details: ! Ksdpfx Aiozvyhqsijdr

Condition: used, empty load weight: 5,300 kg, maximum load weight: 18,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 11/2014, loading space length: 9,400 mm, suspension: steel, tire size: 205/65R17,5, color: other, gearing type: other, front tire size: 205/65R17,5, rear tire size: 205/65R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading height approx. 900 mm, loading area length approx. 9,400 mm, tie-down points. -- Subject to printing errors, errors and changes. Sample images. -- More data available at: !, More details: ! Ksdpfozvyhkjx Aiisdr

Year of construction: 1991, condition: not inspected (used), functionality: unexamined, Robust pillar drill Thyssen Hüller Hille, model UG24 Year of manufacture: 1991 For industrial use Operating voltage: 380 V, 50 Hz Kedpszvyhdofx Aiiedr Current draw: 16 A Operating hours according to the hour meter: approx. 16,783 hours.

Condition: excellent (used), mileage: 261,527 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,670 mm, first registration: 02/2020, fuel tank capacity: 100 l, color: white, driver cabin: day cab, suspension: steel, tire size: 235/65R16, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, central locking, cruise control, fog lights, immobilizer system, navigation system, onboard computer, parking heater, power assisted steering, sliding door, soot filter, traction control, General information Number of doors: 5 Cab: single Registration number: 067010 Technical information Number of cylinders: 6 Engine capacity: 2.987 cc Drivetrain AdBlue system: Yes Transmission Transmission: Sprinter, 7 gears, Automatic Axle configuration Tyre size: 235/65R16 Brakes: disc brakes Front axle: Max. axle load: 2000 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Max. axle load: 2430 kg; Tyre profile left: 80%; Tyre profile right: 80% Measures Dimensions (LxBxH): 634 x 213 x 278 cm Weights Empty weight: 3.180 kg Carrying capacity: 920 kg GVW: 4.100 kg Functional Make of bodywork: Mercedes Environment Emission class: Euro 6d Condition Technical condition: very good Visual appearance: very good Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - 230V power connection - Adaptive Cruise Control - Android Auto - Apple CarPlay - Bluetooth - Bumpers in color - Climate control - DAB Radio - Electrically operated windows - Elektric mirrors - Flashing lights - Front Assist - Heater - Hill Assist Kdjdpfxjzvyg Ts Aiier - Keyless Go - Leaf spring suspension - LED - MBUX Audio - Multifunctional Steering Wheel - Particulate filter - Radio/Cd/Audio system - Rain Sensor - Reversing camera - Side Door Right - Spotlights - Standby 230V - USB Connection - Vehicle heater - Xenon lighting = Remarks = Video of working vehicle: Very neat and complete Ambulance/patient transport vehicle Mercedes Sprinter 319/419 CDI GVW 4100 KG can easily be re-certified to 3500 KG Not subject to tachograph requirements and not speed-limited 3.0V6 Year of manufacture 2020 EURO 6 d New price approximately 200,000 euros! Complete with bed and lift Wheelchair Medicine storage compartments Oxygen and medication attachment points and connections Radio and computer connections available 230 V inverter Unique opportunity with only 261,000 KM Margin vehicle (New price (2020)The base vehicle (the 'bare' chassis):The Mercedes-Benz Sprinter 419 CDI (the powerful V6 diesel variant with 190 HP and a maximum weight of 4,100 kg) cost approximately € 50,000 to € 60,000 bare — including heavier alternators, special suspension, and comfort options — (excl. VAT and BPM, as emergency services receive an exemption for this).The medical bodywork and signaling: The specialist conversion by a certified bodybuilder (such as Strobel) cost an average of € 70,000 to € 80,000. This includes the wall panels, the special floor, the stretcher, the electronics, auxiliary heaters, and the flashing lights. The medical equipment: The complete setup with equipment (such as the monitor/defibrillator, the ventilator, the electronic Stryker stretcher, and the suction pump) adds another approximately €60,000 to €70,000 to this. Total new price more than 200,000 euros)

Condition: used, Year of construction: 1998, Used 2500 mm bending machine by Safan Ksdpfx Ajzvyg Hjiiodr Type: SMK 50 2550 TS1 Capacity: 2550 x 50 tons TS1 CNC control Y1, Y2, X, R, Z1 and Z2 Year of manufacture: 1998