Lagertank 10.000 l

Holvrieka

Condition: used, Year of construction: 1999, Insulated and clad stainless steel tanks standing on upright frames, each with three frame cooling zones and one cone cooling zone. Additional title: outdoor tanks Volume: 1700 hl Operating pressure tank: 1 bar Operating pressure cooling: 4 bar Gedpfszgcuuex Am Ejkd Test pressure: 1 bar Width: 3,8 m Height: 18,1 m Weight: 13 t Material: Stainless steel 1.4301 Position: Vertical Base construction: Skirt Features: PT100, full and empty detection probe, 4 cooling zones (3 frames, 1 cone, 42 l, 42 l, 126 l, 35 l), safety valve

Year of construction: 2026, condition: new, Specifications: - Performance: 2000 L/h - Electric demands: 0,5 kW, 230 V, 6 A, monophase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 550x1075x350 mm - Weight: 50 kg - IP65 certified electronics - Food industrial impeller pump - Juice level sensors - Fully automatic operation, very easy to clean. - With 4pcs wheels. Requires minimal maintenance. Gkedpsfhb I Hsfx Am Eed - The machine is suitable for any Maurer press.

Condition: like new (used), Year of construction: 2015, operating hours: 12,500 h, machine/vehicle number: EWADC22C-XS003, cooling capacity: 2,000 kW (2,719.24 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 46 °C, ambient temperature (min.): 35 °C, TECHNICAL SPECIFICATIONS • Brand: Daikin | Model: EWADC22C-XS003 • Product type: Air-cooled screw chiller • Year of construction: 2015 • Condition: Used • Operating hours: 13,000 – 14,000 h (as declared, not verified) • Cooling capacity: 2,002 kW (Daikin catalog value) | 1,933 kW (2014 selection document) • Cooling capacity (kcal/h): approx. 1,721,700 kcal/h (2,002 kW) | approx. 1,662,400 kcal/h (1,933 kW) • Efficiency (2014 selection document): EER 2.63 | ESEER 4.02 | IPLV 4.47 • Rating conditions: 12/7 °C water | 35 °C ambient • Evaporator: Shell & tube (direct expansion) | water volume 850 l | max. water-side pressure 10 bar • Nominal water flow: 92.2 l/s • Water inlet / outlet: 12.0 °C / 7.0 °C • Water connection: 273 mm • Insulation: Closed cell • Condenser: Aluminium fins | internally grooved copper tubes • Fans: 30 pcs | Ø800 mm | propeller type, glass-fibre reinforced resin | 900 rpm • Fan motor power: 52.5 kW • Nominal air flow: 160,327 l/s • Compressor: 3 x HSA2690524 | asymmetric single screw, semi-hermetic • Oil charge: 75 l • Capacity control: Stepless 25% – 100% • Start method: Star-delta (Y-Δ) • Refrigerant: R-134a | 360 kg | 3 circuits • Power supply: 400 V | 3 phase | 50 Hz | tolerance 10% • Nominal running current: 1,100 A • Max. starting current: 1,486 A • Max. current for wire sizing: 1,608 A • Control panel: MicroTech III • Remote monitoring: Modbus RTU | BACnet/IP | LonWorks | TCP/IP • Temperature regulation accuracy: 0.1 °C • Protections: High/low pressure | oil pressure | motor temperature | freeze | phase monitoring • Sound power: 104 dB(A) • Sound pressure: 81 dB(A) at 1 m • Dimensions: Length 14,785 | width 2,285 | height 2,540 mm • Weight: 12,600 kg (unit) | 13,470 kg (operating) DESCRIPTION Offered with the assurance of Özsayın Soğutma, active in industrial refrigeration since 1982. The unit offered is a Daikin EWADC22C-XS003 air-cooled screw chiller. Current Daikin catalog value for this model is 2,002 kW; the 2014 selection document of the unit states 1,933 kW (12/7 °C water, 35 °C ambient). Designed for large plants with continuous cooling demand. DEVICE CONDITION • Condition: Used • Ready for sale • Condition details and available documents are shared at the quotation stage TECHNICAL ADVANTAGES • 2,000 kW class cooling capacity • 3 independent refrigerant circuits | 3 screw compressors • Stepless capacity control 25% – 100% • MicroTech III control with BMS connectivity • R-134a refrigerant APPLICATION AREAS • Industrial process cooling • Plastic injection and extrusion lines • Food processing and cold storage • Chemical and process plants • Office and commercial buildings (comfort cooling) OZSAYIN DIFFERENCE At Özsayın Soğutma we offer complete solutions, not only equipment sales: • Chiller sales and rental • Overhaul and remanufacturing services • Compressor maintenance and overhaul Gkedpfx Aeuma Them Ejd • On-site service and technical support • Spare parts supply • Project and engineering support SALES & TRUST • Ready for sale • Technical details are shared at the quotation stage • Commissioning support available DELIVERY & PROCESS • Shipment across Türkiye • Export and customs process support • Delivery time and scope stated in the quotation

Condition: new, Year of construction: 2026, Wrapping machines are designed for machine wrapping with stretch film of goods stored on pallets. They are especially recommended where it is required to obtain very high efficiency and low labor and financial expenditures in the process of packaging, so in distribution centers, wholesalers, production plants, as well as in smaller companies. The new model - has a touchscreen control panel, menus in languages: Polish, German, English, French Technical parameters: MASH: - Height :2.4m TABLE Table diameter - 1650 mm Max dimension of pallet - 1200x1200 mm Max weight of the pallet - 2000 kg Type of table: flat Adjustable disc speed: 3-12 R.P.M. Capacity: up to 30 pallets /1h. Automatic return to the starting position Powerful chain drive Soft start and end function POWER 230 V 50 Hz Gkodetpvbmjpfx Am Esd HEAD TYPE (depending on the model) - Pre stretch - Mechanical film stretch up to 350% (optional) - Film stretch: from 1m to 4m - Components from reputable companies including PANASONIC photocell ADDITIONAL FUNCTIONS - Very easy operation - Working hours counter - Pallet counter - Cycle pause function - Stretching on the head modes and not on the pallet - Adjustable wrapping speeds

Condition: used, Year of construction: 2021, Overview The tangential filter system was built in 2021 by the Spanish company sefiltra and used for the filtration of beer. The owner had purchased all the equipment to set up a microbrewery but then decided to shift the production of his beer to a bigger brewery, producing for him.  Techn. details  Filtration system is mounted on stainless steel frame with rollers  Control system: Siemens S7  4 filter cartridges  Recirculation pump CIP connection options Filters particles from 300 µm Gkedpsl Hxnxofx Am Eed

Condition: used, Year of construction: 2017, Overview This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data - Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) - Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm - Closure types: Crown caps - Filling system: Isobaric (for beer and carbonated beverages) Gjdpozcu Slsfx Am Eekd - Product types: Beer and other carbonated drinks - Incl. dummy bottles and CIP cups - With double pre evacuation systsem for lower oxygen pick up - Machine is cleanable with a CIP system

Year of construction: 2026, condition: new, MSP 1100 Belt Filter Press The entire system can be disassembled down to the base frame within minutes! Fully automatic fruit and vegetable press with a closed processing chamber to minimize oxidation. Two high-pressure nozzles are mounted beneath the machine and rotate continuously to ensure optimal performance. Due to the reduced distance between the press rollers and the juice collection tray, foam formation is no longer an issue. Most machine components can be disassembled without tools, making cleaning easy. Equipped with heavy-duty, vibration-damping machine feet. Requires minimal maintenance. Technical Specifications: - Rated capacity: 1,100 kg/h - Power requirement: 1.5 kW, 400 V, 6 A, three-phase - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 2200 x 1330 x 1200 mm Gedperz I Hqefx Am Eokd - Feed height: 1250 mm - Dry matter discharge height: 470/770 mm - Weight: 950 kg - Includes integrated juice pump, collection tank, and level switch - Touchscreen control - Electronics to IP65 - Extra high juice yield: 75% (depending on freshness and quality of the produce) - Air requirement: 50 l/hour at 6 bar - High-pressure water requirement: 360 l/h - Frequency inverter: variable speed control for even more professional processing - High-strength, food-grade polyester press belt, fiber thickness: 2 mm, weave density: 6×16 fibers/cm², ½-twill weave (suitable for pressing without large fibers) - Easy to clean - Requires minimal maintenance - Adjustable, with vibration-damping machine feet - Brush roller for belt cleaning A high-pressure cleaner and air compressor are required for operation.

Condition: used, Year of construction: 2020, Overview The tangential filter was manufactured in 2020 by Spanish manufacturer Sefiltra. It can be visited anytime. The structure is made of AISI-304 stainless steel; it has four wheels and a handle for its wheels and a handle for its displacement. All pipes and accessories are made of AISI-316L, Stainless Steel AISI-316L. The system is operated from the SIEMENS KTP 900 color touch screen, which is located on the front of the electrical panel. Techn. Details Capacity: depending on beer type, recently 1,000 – 1,500 litres per hour Unitary filtration surface: 10 m² Two 0.5 micron hollow fiber membranes Dimensions (LxlXh): 1.800 x 950 x 2.300 mm Weight empty: 350 Kg Operating weight: 470 Kg Equipment 1 pc Centrifugal feed pump 3.0 kW 1 pc Recirculation centrifugal pump 4,0 kW 2 pc Diaphragm HF 6043 MF 05 (KDP3358) 1 pc Modulating valve 5 pcs Pneumatic valves 1 pc 100 L CIP tank 1 pc Angle filter 500 microns 3 pc Electromagnetic flowmeters 5 pc Pressure transmitters 1 pc Temperature transmitter 1 pc Level transmitter 1 pc Liquid detector 1 pc Electrical panel with Siemens S7-1200 programmable logic controller and touch screen Siemens 7" touch screen Gsdpfxeqvvpas Am Eekd

Condition: like new (used), SACOME Industrial Juice Processing Line – Stainless Steel SACOME industrial line for the processing and treatment of juices, nectars, and liquid beverages, designed to integrate different operations for the preparation, circulation, and thermal treatment of the product within a continuous system. The unit incorporates process tanks, heat exchangers, sanitary pumps, piping, valves, and instrumentation, mounted on a common stainless-steel structure with an upper access platform. The system allows the product to be conditioned under controlled parameters before being sent to the next stages of production or packaging. MAIN FEATURES -Manufacturer: SACOME -Type: Industrial juice processing line -Application: juices, nectars, and liquid beverages -Continuous processing system -Process tanks in stainless steel -Product circulation and recirculation system -Tubular heat exchangers -Indirect thermal treatment -Sanitary product pumps -Process piping and valves -Pressure and temperature instrumentation -Process condition control -Circuits for thermal services -Construction primarily in stainless steel -Upper operation and maintenance platform -Self-supporting industrial structure -Hygienic design for the food industry -Integrable with preparation, homogenization, and filling systems Gkodoynkgcopfx Am Esd PROCESS The previously prepared product is introduced into the SACOME line and circulates via sanitary pumps through the different process equipment. The heat exchange system allows the product to be heated indirectly, keeping the product and the service fluid separate. Depending on the operating configuration, different stages of heating, thermal maintenance, and subsequent cooling can be performed. The temperature control and installed instrumentation allow the established conditions to be maintained during the treatment. The product that does not reach the required parameters can, depending on the circuit configuration, be recirculated to go through the process again. Once treated, the product can be sent to a storage tank, homogenizer, or directly to the corresponding filling line. APPLICATIONS Especially suitable for manufacturers of juices, nectars, fruit beverages, and other liquid food products that require an industrial system for thermal treatment and product conditioning. Depending on the characteristics of the heat exchangers and the installed configuration, it can work with: -Fruit juices -Vegetable juices -Nectars -Beverages with pulp -Liquid purees -Fruit bases -Formulated beverages -Other compatible liquid or semi-liquid products The line can be integrated with mixing systems, homogenizers, buffer tanks, CIP systems, and filling equipment to form a complete beverage production system. Machine available for inspection. Additional technical information, capacities, process temperatures, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2019, Pasteuriser Profi PA SH: Capacity: 600 l/h 48 kW heated with gas Automatic temperature controller Stainless steel tank, V4A Dimensions: 2,100 x 880 x 1,300 mm Bag-In-Box dosing unit Profi: Capacity: 600 l/h including weighing unit with automatic stop when the specified filling quantity or weight is reached. Bags with up to 10 litres Additional title: bag-in-box filling Capacity: 600 l/h Max. bag volume: 10 l Power: 48 kW Gkjdpjztyyuofx Am Eod Material: vessel from V4A stainless steel Features: gas burner, automatic temperature controller, weighing unit with automatic stop