Used Other process engineering equipment for sale (75)

Condition: ready for operation (used), Chemical Fume Hood, Laboratory Fume Hood, Exhaust Hood, Used Equipment Overall Dimensions: Length: 2500 mm Width: 1100 mm Height: 1460 mm Table Size: 2000 x 1000 mm Explosion-Proof Exhaust Fan Manufacturer: Klímavent Type: WP7-E/EX Dkolrfjv U A Tqsqdlsl

Year of construction: 2001, Condition: excellent (used), Thumm SU100 P current UV dip impregnation system with exhaust air cleaning system Current UV impregnation is an innovative dip process for low-voltage round wire windings.  In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow.  When the heated winding is immersed, the impregnating agent becomes thin and can thus penetrate into the smallest cavities.  With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can flow off again after dipping on the cooler stack of sheets. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the stack of sheets. The elimination of conventional oven drying saves energy and time. Together with the use of a low-emission impregnating agent, the environmental balance is very positive. Thumm electric UV dip impregnation system Type: SU100 P Stators: max. 250 mm Ø  Connected load: 15 kVA Fuse: 32A Connection: 3 phase 400 Volt 50 Hz Power supplies 2 x 50V / 280 A Thumm aerosol separator 400 V 1.85 KVA Djlrfohuffcjqdlskl Complete plant closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 1998, Condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Dkelju Rwausrfqdljl Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Year of construction: 2022, Condition: new, Manufacturer: HACH Year of manufacture: 2022 Model: MAXX Bühler BU2000 Dkslrfsv U Tufsqdlol Item number: BU2000.99.06V60 S/N: 44899 Sample container: not included Power supply: 230 V Features: Compressor cooling, USB interface Dimensions: 1,100 x 580 x 480 mm Condition: unused Weight: 40 kg

Condition: used, Burkert fluid control systems flow meter Pipe size: DN 65 Control system type: SE 56-B1D1B1A40 Flow meter type: SO 56-T65-3A1B VMA Wekerom Dkslov Txpxerfqdljl See our other ads

Year of construction: 2021, Condition: ready for operation (used), A Nilfisk industrial vacuum cleaner for use in sensitive production environments is available. Power: 1.5kW, max. negative pressure: 18.5kPa, air volume flow: 192m³/h, container volume: 25l, main filter area: 1m², dust class: L/M/H. Machine dimensions X/Y/Z: approx. 800mm/450mm/1200mm, weight: approx. 86kg. Documentation available. On-site inspection is possible. Dkjlrsv Rfqwjfqdlel

Year of construction: 1986, Condition: used, Functionality: fully functional, machine/vehicle number: 7080/86, Used steam boiler 3,9 MW. Djlrfqsv Int Nodljkl

Year of construction: 2020, Condition: new, I have for sale a shaft kiln for burning lime,MgO, it can also be used for incineration or gasification of waste. The furnace is also suitable for sintering mineral materials. The capacity of the furnace is about 3-4 tons/h I have a company that is able to prepare construction and environmental documentation for such an incineration plant, depending on the needs and type of waste incinerated. Included with the furnace is a dryer and loading devices for continuous operation of the device. The maximum firing temperature is approx. 1250 degrees Celsius. Dkolrfqomi Tqzodlol

Year of construction: 2004, Condition: used, Technical details: candle diameter: 21 mm candle length: 300 mm capacity: 1872 Stück/h heating-up temprerature: 70-120 °C cycle time: 13 sec candle material: Paraffin/Stearin control: Siemens S 5 space requirement of the machine approx.: ca.L:24 xB: 2 xH: 5,2 m Candle Production Plant / Candle Molding Machine - This plant is applied for the production of parafin/stearin candles according to the casting process with a high degree of automation. - Multicoloured candles can be produced and equipped with various mould boxes (e.g. cylindrical board candles or pointed candles). - production capacity: for max. theoretical maximum performance of 1872 pieces / h with a minimum cycle time of 23 seconds per mould box with 12 candles with 300 mm pointed candles and board candles with diameter of 21 mm, continuous operation approx. 1200 pieces / h Documentation available Price on a negotiable basis! Dkelrfju Nw S Ieqdlsl *

Condition: new, Model: AS 950 portable Dkelrfqdsv U S Nbslol S/N: 213500021636 Sample container: 24 1-liter bottles Connection: 230 V Features: 2 sensor inputs, rain gauge, USB interface Dimensions: mm Condition: unused Weight: 13 kg

Year of construction: 2017, Condition: excellent (used), UV curing machine  The product is a machine that has been designed for curing silicone. Due to the UV curing, the machine can probably be used for other purposes as well. Manufacturer: Hereaus Curing: UV curing Dkolrfqjg H Sywedlsl Operating voltage: 400 V Control voltage: 24 V Rated current: 16 A Fuse: 25 A Frequency: 50 Hz Year of manufacture: 2017 Among other components used: Heraeus P300MQ Motori Elettrici 71M/2 Motor Condition: used  Complete factory closure, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2007, A TAG folding machine for the production of Z-Line filters is available. Folding width: 1000mm, folding height range: 20mm-147.5mm, folding knife curves: 50 and 100, folding capacity: 20-70 folds/min, connected load: 7kW. Machine dimensions X/Y/Z: approx. 2100mm/2000mm/1000mm, weight: approx. 2500kg, control: Siemens. Documentation available. On-site inspection is possible. Dslrfov N I Ateqdlokl

Condition: good (used), Attachment: Lamella separator Dolrfeb D Etksqdljkl Condition: pre-owned m³/h up to 80 m Usage: Separation of solids and liquids by sedimentation. Lamella separator as a preliminary stage before filter presses are often used for thickening. The filter press in relation to the filter surface can be sized smaller through a thin slurry before thickening. The plant is in good condition and available for rent and for sale. Visit us at the factory is like possible agreement.

Year of construction: 2020, Condition: new, Manufacturer: HACH Year of construction: 2020 Model: 9503900 S/N: 211160501456 Sample container: 1 x 20 l Connection: 230 V Features: Dimensions: 760 x 810 x 1,300 mm Condition: unused Delrfsl Dnd Ijqdlskl Weight: 86 kg

Year of construction: 2015, Condition: ready for operation (used), 1) Eccentric screw pump Johstadt AFJ 70.1 S, year of manufacture: 2011. 2) Eccentric screw pump Johstadt FJ 70.1 S, year of manufacture: 2015. 3) Eccentric screw pump Stöber/HEW/Netzsch DC30-2061-200-U/EEXF100L/U/NE40B, year of manufacture: 1989. 4) Centrifugal pump Stork CN32-200G1S3L1, year of manufacture: 1997. 5) Centrifugal pump Siemens&Hinsch m.b.H/Loher&Söhne AKHK6101/eA132 MA-U, year of manufacture: 1970. 6) Centrifugal pump with electric motor EMK/SPX EC2-HS160M1-2/CC40-200 R6S2L2. 7) Electric motor Siemens 1LA2 130-2CA60, year of manufacture: 1997. 8) Electric motor VEM. VEM electric motor. 9) Electric motor with gearbox Nord SK 132 S/4-2 TF, SK 33-132S/4-2 TF, year of manufacture: 2011. 10) Blower Gebhardt Ventilatoren KEM 61-0200-4 X-14-11. 11) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 Dex 80L/4K, year of manufacture: 2015. 12) Side channel pump SERO/VEM SVM 111 K,V,60-2,32 kPER 80G4 FDS, year of manufacture: 2013. 13) Electric motor with gearbox Getriebebau Nord SK 132 S/4 TF, SK 472-132 S/4 TF. 14) Electric motor with gearbox Getriebebau Nord SK 25-100 L/4 ED, SK 100 L/4 ED. 15) Electric motor with gearbox Getriebebau Nord SK 100 L/40, SK 25-100 L/40. 16) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 DCEx 80L/Ur, year of manufacture: 2015. 17) Centrifugal fan Hürner-Funken GmbH/MM Antriebstechnik HF R160-17D/FY 71 A-4 T, year of manufacture: 2001. 18) Centrifugal fan Konz Lufttechnik/ABB Motors MPR 351/M2V AD 80 B-2, year of manufacture: 2006. 19) Axial fan Helios HRFD 35/4 TK. 20) Centrifugal pump Bedu CRT 70/3, year of manufacture: 2015. 21) Electric motor with gearbox and magnetic field coupling Nord Drivesystems/Varisco SK 33-132MP/4 TF, V 60-2 STGTRM+X+Y, year of manufacture: 2017. 22) Pneumatic agitator PTM. 23) Pneumatic agitator. 24) Pneumatic agitator WP ARO MRV050A/6150051-14-P. Including various stators for progressive cavity pumps. Documentation available. On-site inspection is possible. Individual sale possible. Doljv Extberfqdlekl

Condition: used, Used Crusher for Filter Cake / Lump Breaker Dkjlrsbpia Dofqdljl Drive: Lenze The crusher for filter cake or lump breaker consists of two horizontal rotating shafts.

Year of construction: 2007, Condition: ready for operation (used), Various spare parts and peripheral equipment for the offset printing process, specifically for a Gallus RCS 330, are available. 1) 5x offset printing units GL, year of manufacture: 2007. 2) 20x plate cylinder format cassettes, year of manufacture: 2007, size: 15 inch/21 inch/23 inch/24 inch. 3) Technotrans Alpha r3 water treatment system. 4) Format cutter. 5) Format perforation. 6) Eltromat color control, year of manufacture: 2002. 7) 12x storage racks for inserts. 8) Format cassette transport trolley. 9) Offset insert transport trolley. Documentation available. On-site inspection is possible. Dkolrfqov Dwiljdljl

Year of construction: 1992, Condition: used, Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 125 Engine type: 1130-1190 Delrfqdeb Swr Nelskl Year of construction: 1992 Power: 125 m ³/h Speed: 1000 rpm KW: 2.7

Condition: ready for operation (used), An IFE magnetic separator with a Wagner magnet is available. Magnet type: FE0446-30/55, magnet weight: approx. 78kg. On-site inspection is possible. Delrfqdsv Dwi Eolokl

Condition: used, Lamella separator 2 pieces identical in construction: - Manufacturer and year of manufacture unknown (probably late 70s) Dkjlrfot Ay Scjqdlel - Rectangular design, with discharge screws to the funnel - Dimensions: Length 9700mm, width 3500mm, height 6100mm

Condition: ready for operation (used), A self-built hydraulic unit is available. Tank volume: 1000l, flow rate: 500l/min, medium: water and glycol. Special features: Possibility of setting pre-pressures to throttle the flow and a separately installed pump for coupling with a circuit. Including a level compensation tank. On-site inspection is possible. Expected to be available from the beginning of April 2025. Dkolev Ay Sajrfqdljl

Condition: used, Used cutter suction excavator Z-243 Operating hours: approx. 600 Application: self-maneuvering cutter suction dredger for cleaning water bodies, sludge removal from water bodies Djlrfsrq I I Noqdljkl Pumping capacity: up to approx. 350 m3/h Suction dredger depth: approx. 5 m Total length with extension: 13,20 m Overall width: 2.90 m Overall height: 2.70 m Depth: 0.75 / 1.18 m Draught: ready for operation 0.62 m Suction pipe diameter: 150 mm Excavator depth at an angle: 45° for extension 5.0 m Fuel capacity: 300 liters Cutting speed (variable speed): 0-90 rpm and vice versa Cutting power: 10 kW / 13 hp Deutz main engine: 90 kW / 120 hp Transportable on the road: Yes Largest part for transport: (main pontoon with extension) 11.60 x 2.50 x 2.50 m, approx. 10 tons Cabin: One-man operation in comfortable, low-noise cabin Transport: Can be dismantled and transported by road, overseas transport in containers Pontoons: The hull consists of several pontoons connected by a proven coupling system Coating: Marine coating system and cathodic protection for optimum protection Consumption: Low fuel consumption and low total cost of ownership System: Closed throat cooling system

Condition: used, Machine: Screw conveyor, hollow screw Housing / screw: Stainless steel housing / standard steel screw Special feature: motorized solids pusher Dimensions: Length = 13.7 m / Ø screw = 350 mm / width inside = 400 mm / width outside = 600 mm Dolrsrmix Esfqdlekl Weight: approx. 600 kg

Year of construction: 1989, Condition: used, Used shredder Manufacturer: Seybert & Rahier Type: RST 413 Serial no.: 158283 Dslreil Aqqjfqdlokl Year of construction: 1989 Q: l/h 0-1000 H: mWS 33 Buffer liquid: 500 cm3

Year of construction: 1989, Condition: used, Used shredder Manufacturer: Seybert & Rahier Type: RST 413 Serial no.: 158282 Delrfeil Aqujqdlokl Year of construction: 1989 Q: l/h 0-1000 H: mWS 33 Buffer liquid: 500 cm3