Year of construction: 2024, Condition: as good as new (ex-display), machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Co Iev Iqt Eea U Rzxorb Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: SA13G00207, type of input current: AC, input voltage: 380 V, input current: 25 A, net weight: 60 kg, Equipment: documentation/manual, Nordson Mesa hotmelt adhesive unit, in a good fully working condition. This hotmelt unit has 6 hose connections (Ni120) and a tank capacity of 13.6 liters. Crs Iaswc S D Hs U Rzxjb The hotmelt unit is internally and externally cleaned, checked and fully functional

Condition: like new (used), Year of construction: 2022, operating hours: 400 h, Functionality: fully functional, total length: 3,818 mm, total height: 1,785 mm, total width: 1,885 mm, product height (max.): 120 mm, product length (max.): 400 mm, product width (max.): 420 mm, working height: 870 mm, overall weight: 677 kg, film width: 600 mm, Equipment: documentation/manual, For sale: Minipack-Torre Pratika 55 smart packaging machine in mint condition. The machine offers the following features: Cs Ia U Rzewdw Adoxerb – Automatic sealing machine with integrated tunnel – 180° return conveyor belt – Vertical photocell – Rotating bars in the tunnel – Stainless steel product tray – Adjustable guides – Cycle speed: 0 – 1,200 cycles per hour – Max. product size: length 400 mm / width 420 mm / height 120 mm – Max. film dimensions: width 600 mm / roll diameter 300 mm – Working height: 870 mm – Dimensions with return conveyor belt: length 3,818 mm / width 1,885 mm / height 1,785 mm – Connected load: 230 V / 1ph / 3 kW / residual current up to 30 mA (RCD type B or direct connection) – L-sealing system – Schneider Electric PLC M221 with 128 individually configurable and nameable programs – Color 4.3-inch touchscreen control panel – USB and SD communication interface – Servo Drive technology with brushless motor from Schneider Electric – Micro-perforation device with film tension adjustment at the set product height – Height-adjustable triangles and sealing bars – Standard conveyor belts comply with the strictest food regulations (FDA), fully antistatic – Motor-driven waste wrapper – Integrated shrink tunnel with reduced energy consumption – Weight: approx. 677 kg – Like new / Year 2022 / Very little use – Available immediately

Condition: new, Year of construction: 2021, machine/vehicle number: Sanitary napkin , surgical mask, paper napkin, nap, Automatic Sanitary napkin , surgical mask, paper napkin, napkin, paper, Sanitary Napkin, Mask, Towel, Wet Wipes , wet towel packing line Sanitary Napkin Packing Machine wet wipes, dry wipes, food pad packing, wound pad packing, dry wipe packing Main Features ☆ Fully servo driven,Servo motor management by electronic Ce Iash T Dd Hs U Rzxjrb ☆ Modular structure design，Small floor area ☆ Force restrict protection, stable running ☆ Suitable for different direction packing Main component configuration ★ Motion control system：MITSUBISHI/SIEMENS ★ pneumatic：SMC ★ Guide rail, screw rod ： TBI 、TMI ★ Electrical accessories：Schneider Parameter Working speed UP to 600 pieces/min and 60 bags/min Number of pieces per row 10-20pieces/row General dimensions (LxWxH) 6295x1000x2277mm Weight 3522KG Electrical Power consumption 23KVA Air Supply 0.65-0.85Mpa Sanitary napkin , surgical mask, paper napkin, napkin, paper, Sanitary Napkin, Mask, Towel, Wet Wipes , wet towel packing line Our Toilet Paper Bundle Packing Machine, Full Automatic Baby Wet Wipe Line, Napkin Tissue Paper Making Machine have high stability and low failure rate, which provides a favorable guarantee for improving production efficiency. The trust of the majority of users is our unremitting pursuit, and the support of users is our success. We constantly grasp the pulse of market development and provide our customers with more satisfactory products and services. With years of focus and accumulation in the water treatment industry, our company already has a large number of experienced personnel, and constantly updates products and improves the quality. Our company will create value for customers through stable and reliable quality and high-quality service. In order to foster a good environment for the development of our company, we implement entrepreneurial principles in business development, including adopting flexible working hours and relaxing the dress code.

Condition: good (used), Year of construction: 2016, English: Packaging type: Tray + Lid Max. output: 15 tray, lid/min Infeed height: 850 mm Outfeed height: 1030 mm Machine width: 4825 mm Machine length: 9150 mm Noise level (product-dependent): < 85 dB Weight (version-dependent): approx. 2500 kg Function control: Electropneumatic Dimensions of the collection pack: Length: 170 - 400 mm, Width: 90 - 300 mm, Height: 80 - 350 mm, Tray height: 40 - 150 mm Blank: Length: 170 - 700 mm, Width: 120 - 620 mm Voltage: 3x230/400 V, N + PE Frequency: 50 Hz Total connected load: approx. 24 kW / 36 A Max. fuse: 50 A Max. air consumption at 6 bar: 40 NL/cycle Max. air pressure: 7 bar Min. operating pressure: 6 bar Air connection: R 1/2'' Vacuum: -0.6 to -0.8 bar Glue pressure: 2 - 3 bar German: Packaging type: Tray + lid Max. output: 15 trays, lids/min Infeed height: 850 mm Outfeed height: 1030 mm Machine width: 4825 mm Machine length: 9150 mm Noise level (product-dependent): < 85 dB Weight (version-dependent): approx. 2500 kg Function control: Electro-pneumatic Dimensions of the multi-pack: Length: 170 - 400 mm, Width: 90 - 300 mm, Height: 80 - 350 mm, Tray height: 40 - 150 mm Cutting: Length: 170 - 700 mm, width: 120 - 620 mm Voltage: 3x230/400 V, N + PE Frequency: 50 Hz Connected load (entire system): approx. 24 kW / 36 A Max. fuse: 50 A Max. air consumption at 6 bar: 40 NL/cycle Max. air pressure: 7 bar Min. operating pressure: 6 bar Air connection: R 1/2'' Vacuum: -0.6 to -0.8 bar Glue pressure: 2 - 3 bar Cs Iasv T Amuj U Rzxjrb

Condition: good (used), Year of construction: 2018, Strapping machine Manufacturer: Transpak Type: TP 601D1 Year of manufacture: 2018 Cardboard up to 850 x 600 mm (W x H) Crs Ia U Rjvxhd Ajzxjb Strap width: 10–13 mm ä170425

Year of construction: 2025, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Ce Iajv Npx Nj U Rzxorb Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 131, total length: 8,500 mm, total width: 1,100 mm, total height: 2,100 mm, input voltage: 400 V, For Sale: Used Multivac R240 thermoforming machine / horizontal packaging machine Including: - Busch vacuum pump Type: (R5 RA0302 D) - Multivac mixer / mixer for CO2 and N2 (oxygen and nitrogen ratio) - Labeling machine from MR Etikettiertechnik Type: MR635 - Matching cool box from Selbach Type: Cooler BK70 Year: 2017 thermoforming machine: Brand: Multivac Model: R240 Year of construction: 2004 Width foil: 420 mm Max depth mold: 125 mm Machine dimensions: Length: 8500 mm Width: 1100 mm Height: 2100 mm If you have any questions or comments, we would like to hear from you! Cre Ia Ujwc T Uyo Rzxeb Viewing is possible on location! Transport in consultation. Kind regards, Leo Holland

Condition: new, 23 boxes (45 rolls) of strapping tape, Mosca, 8x0.45mm, length 4500m, core 200, transparent – used -: Price for complete purchase ex-site: only €2,200 (net)!! Manufacturer: Mosca Type: Rollenkenner pp-080-045-tr-1-g-200-4500 Contents: 2 x 4500m Core: 200mm Color: Transparent 22 complete boxes (2 rolls each) plus 1 roll Crj Ia U Rjv T Rw Ijzxeb Condition: New Available: Immediately Location: Braunschweig

Condition: good (used), Year of construction: 2000, age 2000 Cj Iajv Unxfe U Rzxorb mobile stacking system for markfree delivery bundling delivery with max. 3up computer control with digital display banding with paper or plastic bands mobile sub-frame Delivery time: immediately

Condition: reconditioned (used), Year of construction: 2012, Functionality: fully functional, Cyklop Strapping Press / Cyklop Pallet Press Cre Ia U Rzewdha Hexjb Technical Specifications: Machine Type: XZE 30.2-18 DT Year of Manufacture: 2012 Packaging Unit: Width: 800 – 1,200 mm Height (including pallet): 350 – 2,600 mm Weight: 50 – 1,500 kg The Cyklop Press: Length: 1,950 mm Useful Width: 1,100 mm Conveyor Height: 350 mm Roller Diameter: 89 x 3.25 mm Roller Shell Surface: Galvanized Roller Pitch: 150.8 mm Load Capacity: 1,500 kg Centering Alignment: Concentric Minimum Usable Width: 600 mm Maximum Usable Width: 1,300 mm (incoming pallet is from the upstream Conveyor (centered conveyance) Centering beam length: 1,400 mm Performance: Total output: 60 packages/h with 2x2 strapping Power supply: 3/N/PE, 380 - 415 V, 50 Hz (loadable neutral conductor) Emergency stop: 2-channel Area protection: 2-channel Control system: Siemens S7 300 Functional sequence: The packages are positioned via the conveyor system of the strapping press. The signal exchange with the higher-level control system takes place via potential-free contacts. The number and position of the straps are determined by the preselected program. After strapping is completed, the package is released to the higher-level control system for further transport. The package is then sent to the higher-level control system. Intended strapping material: Quality: PET strapping Documentation: Version: Cyklop Standard Quantity: 1 copy in a Cyklop folder 1 copy on a USB stick in PDF format

Year of construction: 2018, Condition: good (used), Fully automatic angle welder / Fully automatic side welding machine Manufacturer: Diez Type: AWS-C 9070 CS Year of manufacture: 2018 Shrink tunnel Manufacturer: Diez Type: HTC 122-40D Year of manufacture: 2018 Operating side: Left in the direction of travel Passage width: approx. 600 mm Passage height: approx. 190 mm Sealing length: approx. 900 mm Working height / belt height inlet/outlet: approx. 860 mm + 100 Performance: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230 V AC, 50 Hz, 1 Ph + N + PE Power consumption: 3.5 kW Rated current: 10 A Crj Ia U Rzetzcd Soxjb With cable and 16 A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm ä170425

Year of construction: 2025, Condition: as good as new (ex-display), machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) Crs Ia U Rev Iqyrszxeb ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Condition: used, Year of construction: 2000, Used IMA model TR 130 thermoformer blister packer. Suitable for Alu/Alu blisters, rated at up to 80 forming strokes per minute. Number or blisters in one stroke: 1 - 3blisters. Max. forming capacity 240 blisters per minute. Forming film width 30-130 mm, length 60-130 mm. Maximum forming depth 12 mm. Includes controls and technical documentation. Also includes some format dies. Crj Ia Uen Hv Ato Rzxob

Condition: new, 12 boxes (24 rolls) of strapping tape, Tewe, 12x0.63mm, length 3000m, core 200, black – used -: Price for complete collection from location: only €1,200 (net)!! Manufacturer: Tewe Type: 12063, 7640 / Q 2242402 Year of manufacture: 2x 3,000m Cj Ia U Rov T Rwhezxjrb black Diameter: 200mm Condition: New Available: Immediately Location: Braunschweig

Condition: good (used), Functionality: fully functional, SPK 4-35 II Cre Iast Hwg Se U Rzxob

Condition: used, Year of construction: 2019, machine/vehicle number: 26827A, With driven roller conveyor, roll width: approx. 150 cm, 08RP automatic strapping machine, strap unwinder, control/operating panel with SIEMENS control, 3 pallets of strapping, mint condition (Please note: Loading will be carried out by a specialist company. By bidding on this item, the bidder accepts the additional loading costs of €2,450.00. This additional service will be invoiced separately. The machine will only be released for collection upon payment of both invoices. The collection date will be communicated separately.) Ce Iasv Tv I Ss U Rzxsrb

Condition: good (used), Year of construction: 2013, Film Shrink Tunnel Manufacturer: Beck Type: HV 601 Year of Construction: 2013 Maximum tunnel width: 600 mm Maximum tunnel height: 280 mm Heated tunnel hood length: 1,000 mm Transport length: 2,100 mm Heating output: 4 - 12 kW, adjustable Connected load: 13 kW Co Ierntfyja U Rzxsrb ä170425

Year of construction: 2025, operating hours: 1 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: S23NEOS04, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours Ce Iasv Iq Aae U Rzxerb High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: refurbished (used), Year of construction: 2012, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle wrapping machine Super Wrap 1300 de Luxe In-Line Year of construction: 2012 Technical Data: Film: Flat film, up to approx. 120 µm Film roll width: max. top 1350 mm, bottom 1300 mm Passage height: 100-500 mm Touch panel: Siemens TP177 Control system: Siemens S7 Cre Ia U Rzsrvx Ewjxsb This particularly versatile banding machine works with 2 flat film rolls. The product is fed fully automatically via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled and therefore maintenance-free. The film rolls are simply placed on the machine and the film is removed by a motor. Manufacturer: Kallfass GmbH Type: Shrink tunnel Universal 1300 NT Year of construction: 2012 Technical Data: Tunnel passage width: 1150 mm Tunnel passage height: 600 mm Tunnel outlet, extended: 500 mm Particularly powerful shrink tunnel with bottom and laterally adjustable for precise control of the hot air outlet for optimum shrink results, even with difficult product contours. shrink results even with difficult product contours. Equipped with 2 hot air blowers and infinitely adjustable bar chain transport. Function guarantee, no warranty

Condition: used, Year of construction: 2006, Functionality: fully functional, working width: 3,000 mm, stack height: 1,800 mm, Visible in production until the end of July 2025. It will be dismantled in August. Originally purchased in Italy at the end of 2020. Cj Iowdxdvsa U Rzxsrb After a full renovation, it started production in 2023. The machine is in very good condition. It is being offered for sale because it will not be compatible with a new production line currently being installed. This model is designed to work with bottom printing systems. Previously operated with a Curioni 2800 rotary printer, and currently works with a Curioni 2200NT Casemaker. More pictures and movie on demand email/signal/whatsup

Condition: refurbished (used), Bosch VRM 6040 Capping machine, closing machine, capper, can sealing machine, can seamer Including complete lid feeding system The machine is located in Germany at our contract manufacturer. The machine is high-performance and has four heads. It can run at up to 120 cans per minute, but we ran it at 30 per minute. The machine is currently set to process 400 ml Obeck cans with (I believe) 89 mm lids, but the setting can be changed. The machine has always been serviced and works perfectly. Capacity: 120 cans per minute Crj Iajwc Em Ij U Rzxob The machine is in perfect working order and can also be tested on-site. The only reason for the sale is the change in packaging for our product.

Year of construction: 2018, Condition: excellent (used), Angle Welder Manufacturer: Diez Cre Ia Ujd Hp Ars Rzxsb Type: WS7050PC Year of Manufacture: 2018 Welding die: 700x500 mm Foil roll holder with spiked roller ä170425

Year of construction: 2025, operating hours: 1 h, Condition: like new (used), machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Cro Ia U Rzjv Iqrusxjb Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2025, operating hours: 1 h, Condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm Cj Iasv Iqqws U Rzxorb 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control