Condition: excellent (used), Year of construction: 2012, Now for sale - Stretch film robot from FROMM in very good condition. The machine was manufactured in 2012, but has been gently used in clean and nice environments - hence the good condition. Cgob Ejwgcbdsa D Svot With a fully charged battery, the machine can wrap approximately 150 pallets. However, the batteries are not new, and the capacity may therefore have decreased. The machine can wrap pallets with a minimum size of 600x600 mm and a maximum height of 2,100 mm. The stretch film robot is also equipped with a photocell for automatic recognition of pallet height, and with the possibility of recognizing black goods/stretch film. Pre-stretch from 20-70%. The machine is very quiet, and has a noise level of less than 80dB during wrapping. Available for immediate delivery. Shipping is additional. Model year: 2012 Dimensions: H: 2 m / W: 1.6 m / L: 1.8 m Manufacturer: FROMM Packaging Systems Model: FR330 Year of manufacture: 2012 Height: 2,000 mm Width: 1,600 mm Length: 1,800 mm Capacity: 20 pallets / h

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 410B010616003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 410B010616003 Year of manufacture: 2006 Strapping: 5-9 mm, coil core 200 mm, width 190 mm Transport speed: 0.8 m/sec. - Transport height: 850 mm (30 packages/min. with single strapping, 15 packages/min. with parallel strapping) 12-month warranty (excluding: machine control, travelling expenses and wear and tear) Properties / Features: ⦁ Suction ⦁ Reinforced exhaust, with bundle height detection via bundle press (bundle height below 10 mm to min. approx. 3 mm - depends on product) ⦁ Strap scanning ⦁ Strap ejector ⦁ Strap infeed, automatic ⦁ Strap cutting blade ⦁ Command buttons, additionally opposite operating unit (START/STOP/NOT-OFF) ⦁ Blow gun with spiral hose ⦁ Bundle height-dependent automatic belt tensioning system ⦁ Inlet and outlet timing with complete plug connection, 16-pin (Walther) ⦁ Height adjustment of the feet Cebewcq E Aj Ea D Svegt ⦁ Light barrier attachment at the top ⦁ Mains cable, length 3 m ⦁ Package scanning ⦁ Parcel stops, move away from the parcel when opened ⦁ Parcel press gentle (with laser) ⦁ Plexi protective doors on the side, firmly screwed in place ⦁ Press beam, double ⦁ PLC control with jog dial control panel ⦁ Coil quick-change device ⦁ Cycle-stop interlinking ⦁ Table belt drive, infinitely variable (frequency converter) ⦁Electrics: Connection voltage 1 phase with neutral conductor or 2 phases at 198V, 208V, 218V, 220V - 240V, 390V - 410V, 450V - 500V 50 Hz or 60 Hz - Here set to 400 V - 50 Hz -

Condition: used, Year of construction: 2003, total length: 4,420 mm, total height: 2,700 mm, total width: 1,500 mm, Manufacturer: Gualapack Model: CHP 40/3 Year : 2003 Type : Doypack bag filler, sold with laminar flow. > Video available on request. Cgob Easvlzx Tj D Svot Electrical supply : 380 V three-phase/50 Hz. with separate neutral and earth conductor. Pneumatic supply: Compressed air 6 to 7 bar (atm.). Filling capacity = max. 1500 ml Filling temperature: 90°C max. Sachet production: By automatic feeding system Cap feeding : By vibratory unit and cork feed chute. Packaging dimensions: Max. width 120 mm / Max. height 270 mm. Max output : 40 pieces / min Operating principle Automatic loading of sachets onto the turntable. The filling date or use-by date is printed on the pouch (or other information). Filling station: 1) Suction of air from the sachet (using a vacuum pump) / 2) Filling of product, taking into account the capacity of the sachet / 3) Filling of the sachet with air or gas (nitrogen) if there is a risk of bacteriological problems with the product. Apply the cap to the sachet and pre-tighten the cap Final tightening of the cap to the prescribed torque. Check the position of the cap to see if it is correctly screwed on or if it is loose. The sachet is unloaded onto a belt conveyor for evacuation from the machine. Overall dimensions : Width 150 cm Length 441.50 cm Height 270 cm Weight : 1200 Kg

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, type of input current: AC, - Staalkat Ardenta in very good condition - built in 2009 - capacity 54000 eggs per hour - 12 packaging lanes - loader - 12 closers - Completely stainless steel - available end of August Csb Eaowf Urro D Svogt For more information, please call us. Bos Technical Support import-export packaging machines. Sorteermachine eiersorteermachine gradingmachine sortiermachine sortieranlage eierverpackungsmachine Moba, Staalkat, Prinzen, Rational, Kletec, Yaskawa

Condition: used, Year of construction: 2016, Strapping machine Manufacturer: Transpak Type: TP 601D1 Year of manufacture: 2016 Csb Eaev Ic A Es D Svsgt Cardboard up to 1,050 x 800 mm (W x H) ä270425

Condition: excellent (used), Year of construction: 1997, Pago-label dispenser double unwind product length min. 50mm width max. 320mm Csb Ea Deh Eh Nwo Svegt BB version - film feed from below for packaging sticky or difficult to feed products

Condition: used, Functionality: fully functional, PALOMAT Pallet Dispenser – used, excellent condition ✅ Condition: used, fully functional, like new ✅ Top configuration – manual and automatic modes ✅ Manufacturer: PALOMAT (Denmark) ✅ Handles up to 15 pallets, max. 500 kg Cjb Ea D Sswhci Revogt ✅ Distributed by Witting – Hanterar bättre lösningar (Sweden) Perfect for warehouses and production facilities – improves workflow, safety, and efficiency.

Condition: refurbished (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 112A011713008, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 112A011713008 Year of construction: 2017 for parcels max. 600 mm width x 600 mm height 12-month guarantee (excluding: machine control, travel costs and wear and tear) Properties / features: - ASLF anti-strap loss function permanent strap control - Automatic tape feed - Strap width 5 - 12 mm, optional - Operator terminal with soft tension button - DAT Direct-Access-Technology - Torque-controlled retensioning force, adjustable Cobewclgne Ea D Svegt - Single item strapping - Foot switch on the operator side - Mobile machine - Table height infinitely adjustable - Table top hinged at the front and removable at the rear - Machine colour: Frame RAL 7004 / Frame RAL 7016 - Internal strapping coil - Mains connection at the top - Strapping tape 5x0.47mm, white, 7000 m/coil, polypropylene DIN EN 13 394 The machines are delivered with this strap, the remaining strap is included. - Table top front 600, hinged - Rear table top 600, screwed

Condition: ready for operation (used), LCR Mod. QUARK Automatic Nr. 4 cardboard stations without roll Different sizes and thicknesses Cgeb Eewhbqtoa D Svot Year 2006 By entering the piece sizes in the command, the machine calls the most suitable program The command works with programs defined by the customer “including protections” Based on the program, the machine automatically calls the most suitable cardboard size In essence, use is automatic but the start is always given by the size of the piece indicated by the operator The machine with 6 independent axes Maximum useful dimensions in width 2400 mm Minimum useful dimensions in length 450 mm Minimum useful dimensions in width approximately 200 mm Panel power 3.5 kw Total length 11,400 mm + support surface at machine exit Max. width 3,199 mm Separate control panel

Condition: excellent (used), Year of construction: 2017, Strapping machine after inspection and ready to work. Csb Esvzqk Dja D Svsgt Basic technical parameters: Year 2017 Electric power supply 230V / 50 Hz Bonding speed up to 65 cycles/min with frame 650x500 mm PP tape width from 5 mm to 9 mm PP tape thickness from 0.35 to 0.65 mm Tape tension force up to 1 to 32 kg Work table height adjustable from 820 to 920 mm Machine weight approx. 157 kg Max. weight of packed load up to 70 kg Minimum load dimensions 70×20 mm Carcass dimensions 200mm/150 optional Power consumption 0.5 kW Operating temperature from 5 to 40° C

Condition: excellent (used), Manufacturer Langguth. Top condition. The machine is for signs or all-round labels. Ready for immediate use, but the system can be completely refurbished on request. All wearing parts and the electrics are replaced here. It is possible to replace almost all sheet metal parts with stainless steel. Or all parts are blasted and painted silver (color selection possible). Of course, we are also happy to supply the conveyor technology before and after the machine. Don't hesitate to contact us. Csbetdgx To Ea D Svsgt We have a lot of machines in stock that we haven't listed online here. We can support you from empty glass or can loading to the finished pallet. Best regards, Gregor Guminski

Condition: good (used), Suitable for products with width from 20 to 400 mm x minimum 75 mm long x maximum 200 mm high Ceb Ea D Ssh Ht Szsvjgt

Condition: good (used), Functionality: fully functional, A good used Auger filler Cjb Ea Dewcrlwe Svsgt

Condition: excellent (used), Year of construction: 2021, A flow-wrapping machine that is suitable for packaging various products. We would be happy to advise you! Dimensions ////: Length: 400mm Width ////: 160mm Film Max ////: 340mm Cgjb Eaeu Ny Eqj D Svjt Price ////: without printer €5,500 Price ////: with printer €8,900

Year of construction: 1990, Condition: refurbished (used), Functionality: fully functional, machine/vehicle number: 647-230, Lid Punching machine without tools Type Hamba 647-230 foil width - 230 mm very good condition Ceb Esnr Ex Tsa D Svsgt - with used embossing calender for worm structure - Power connection: 220/380V - three phases - Additional punching tools available - e.g. 1x 2-fold tool - diameter 80.50mm 2x 2-fold tool - diameter 75.50mm 1x 2-fold tool - diameter 59.54mm 1x 2-fold tool - diameter 93.80x120.90mm

Condition: excellent (used), Year of construction: 2013, operating hours: 24,666 h, Functionality: fully functional, - Top-functioning packaging machine (thermoforming machine) from the PowerPak series. - Currently still in operation until the end of 2024. - Perfect for packaging pasta. - Inspection under production conditions (packaging of gnocchi) possible at any time. - On request with matching ExaktaPack brand infeed conveyor and scales (not included in the price) - On request with suitable metal detection with and without additional ExaktaPack label dispenser (not included in the price) Cob Eoua Hchoa D Svogt Technical details GEA PowerPak: - Film width: 350 mm lower web, 334 upper web - approx. 12 cycles / minute - Forming tool: 1.1, 2.1. 2.2 - Rigid film, PP, PET etc. - Bottom film preheating - Longitudinal and cross cutting with noiseless edge trim winding - Machine length approx. 9m - Draw: 60 mm - Busch vacuum pump (included) - Pneumatic discharge station and distribution - Continuous cooler to cool the forming and sealing stations. Further on request and/or inspection

Condition: excellent (used), LINE (year 2024) for transporting, assembling and pressing furniture carcasses. Composed by: A) Motorised belt for transporting and assembling furniture (length mm 2500) B) Clamping Pressing machine Mod. WEPRESS TWIN EP 8. 2, with motorised belt conveyor, furniture diemensions - Min/Max length: mm 250 /2500 - Min/Max depth: mm 300 /820 - Min/Max height: mm 250 / 1200 C) Turning device (0°-180°) Automatic (motorised belt) length mm 1800 + flaps D) Motorised conveyor belt (length mm 2500) E) Motorised conveyor belt (slow speed) length mm 7000, for insertion of drawers, corners (protections), cartons (packaging) F) Motorised conveyor belt (length mm 5000) G) Motorised conveyor belt (length mm 2500) Ceb Easwcn Hdj D Svogt H) System Mod. SILVERPACK 150 LIGHT - S self-dimensioning system for automatic closing (lower and upper) of cardboard boxes. Complete with lower and upper, self-adjusting (with adhesive tape) TAPER. Maximum useful dimensions (external box) mm 1530 x 820 x 1350 (H) and Minimum useful dimensions (external box) mm 300 x 160 x 160 (H) I) 90° Transfer (with rollers and 6 belts) for the outfeed of packed products (mm 1600 x 850 x 700H) L) Inclined conveyor with idle rollers for the accumulation of packed furniture (mm 6000 x 800 x 450H)

Year of construction: 1999, Condition: good (used), Angle welder Cobsh Ht R Is Ea D Svsgt

Condition: used, Packaging machine, strapping tool, and automatic strapping machine ORGAPACK Type CT 2650 Strapping machine for plastic strapping Automatic strapping machine, automatic strapping machine for PP strapping Machine No. 1624, built approx. 2010 Table size: 930 x 470 mm Working height: 700 to 800 mm Maximum frame width: 930 mm Maximum frame height: 700 mm Package width: max. 900 mm Package height: max. 680 mm Package width: min. 80 mm Package height: min. 30 mm Strap width: max. 12 mm (installed is 12 x 0.55 mm) Csbeukxwme Ea D Svsgt Tension force: 10 to 500 N Coil width: 180 mm Power supply: 400 volts, 50 Hz. - Fully automatic strapping machine for PP plastic packaging strapping (polypropylene packaging strapping) - Sealing unit with heat-welded seal (heat wedge seal) - Continuously adjustable strap tension via electric slip clutch - Electric foot switch - Strap dispenser fixed to the side of the machine - Stainless steel table with steel rollers - Mobile on casters - Operating instructions - Included is a roll of plastic packaging strapping 12 x 0.55 mm, Ø 400 mm (black) Function: The strap is located in the outer frame. The strap is automatically wrapped around the object to be packaged (carton) and inserted into the clamping point. The tensioning mechanism is electrically triggered. Once the tension is reached, the strap is welded and separated. The strap then immediately re-runs automatically through the outer frame. Dimensions L x W x H: 1540 x 520 x 1630 mm Weight: 160 kg Good condition

Year of construction: 2022, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 220219, ORITEQ Q-BOX ADVANTAGES With Q-BOX, you can create custom boxes for your products according to your specifications. This increases the value of your product and prevents damage during transport. It eliminates the use of oversized cartons and the storage costs of unused cardboard, protects your products from damage, and prevents wasted money. Q-BOX gives you the opportunity to produce 100% sustainable and environmentally friendly products. Reduce Costs You don't have to specify a minimum order quantity for boxes. You can produce customized boxes based on the cardboard in your warehouse. Q-BOX automatically produces personalized boxes on time. Raw materials are used efficiently, resulting in significant savings on packaging and filling materials. Save Time and Money Employees no longer waste time searching for suitable boxes for packaged products. Better Protection During Transport. You can produce boxes that fit each product perfectly and offer better protection during transport. Increases efficiency Reduces labor Minimizes damage Minimizes empty space in the box Less corrugated cardboard is used Organizes storage space Reduces shipping costs Increases customer satisfaction Increases environmental sustainability Condition: very good, little used Box width min. 200 mm / max. 2600 mm Box thickness: 2-7 mm Boxes/min. 5-14 Cgob Eewgl N Dja D Svjt FEFCO types: 80 Number of vertical knives: 8 (standard) MIN. DISTANCE BETWEEN VERTICAL knives: 22 mm MIN. Package height: 22 mm Carton feeder: 1 Carton type: Continuous form / Single sheet feeder Speed: 60 m/min Power: 2.5 kW Compressed air: min. 7 bar ORIMAK SOFTWARE Weight: 2240 kg We are selling the machine because we mostly only do series production and very few custom orders. The machine will be available for sale in June 2025.

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, Here we ask: LINX printer Cgob Eaerlm Nij D Svet Model No. 8920 We would be happy to advise you!

Condition: good (used), Year of construction: 2005, Film wrapping machine; Machine number: H05 - H0N40008; Year of manufacture: 2005; Pack length: 100-250mm; Pack width: 100-250mm; Pack height: 20-160mm; Output max. 80 packs/min; Packaging material: Polyethylene (PE), polypropylene (PP), oriented polypropylene (OPP), other heat-sealable materials; Product infeed: Manual or automatic via upstream folding machine (Also for sale, Servotec servo-flex 800A) High-performance film wrapping machine for packaging cosmetic tissues, handkerchiefs and napkins in all standard product dimensions. It impresses with its simple and clear design. Ceb East H Iwbs D Svjgt All NW-6 models are characterized by fast format changeovers, simple operation, high stability and excellent packaging quality.

Condition: new, Functionality: fully functional, Year of construction: 2023, warranty duration: 12 months, !! We would be happy to advise you !! Production orientation ////: Vertical Conveyor system ////: Feed and discharge optional and dependent on the product Film feed ////: rear Form shoulder ////: fixed Operator display ////: touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (depending on film width) Packaging height ////: dependent on forming shoulder Speed ////: 15-30 bags/min. depending on material, packaging size and product Foil width ////: 110-320 mm Csb Ea D Ssq Ikhasvsgt Consumption ////: approx. 4.6KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 600 kg System dimensions ////: approx. 1720 x 1400 x 1750 mm System material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer holder ////: matching ink wheel printer optional for an additional charge of EUR 1200 Delivery time ////: Current delivery time under 10 weeks Platform and Z conveyor system €12,000 Features: Stainless steel version also suitable for the food industry • Application for powder, Grains, liquids, paste/dough and small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control using color symbols • Bag closing system for finished stand-up pouches • Safety protective covers • Can be combined with upstream and downstream machines • Customer-specific changes/designs on request • 12-head scale integrated • Each funnel 0.8L Additional options (on request and at an additional cost): • Stainless steel finish/paint finish • Zig-zag knife, Euro hole stamp etc. • Automatic stopping for empty products (no product - no bag) • Automatic product feed systems, cyclical insertion systems • Perforation units (tear thread) for easy opening • Length-dependent product processing using photocell query Production orientation Vertical

Condition: used, Year of construction: 2008, Film wrapping machine, packaging machine, manual loading Maximum product dimensions: Width: 600mm, Height: 280mm, Length: 400mm Film feed by means of suction belts, head sealing, side folding, side sealing by means of sealing tapes Cob Eaetyugkj D Svsgt

Condition: new, Functionality: fully functional, Year of construction: 2023, warranty duration: 12 months, machine/vehicle number: Flowpack, !! Short delivery time, under 10 weeks, we will be happy to advise you!! Production orientation ////: Horizontal Conveyor system ////: Chain conveyor belt, length as required Film feed ////: from above Form shoulder ////: flexible and fixed Operator display ////: 7" touchscreen with memory functions Cgsb Ea Deq Ikf Uj Svst Drives & control ////: 3 servo motors and PLC control Packaging length ////: 120-500 mm Packaging width ////: max. 220 mm (depending on film width)) Packaging height ////: 20-80 mm (depending on forming shoulder) Speed ////: 25-80 bags/min. Film width ////: 200-600 mm Consumption ////: approx. 5 KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 600 Kg System dimensions ////: approx. 4260 x 1130 x 1400 mm System material ////: "Carbon steel. optional for an additional charge 304 stainless steel" Print mark sensor ////: Yes External compressed air required ////: No Printer holder ////: for an additional charge Delivery time ////: Current delivery time under 10 weeks Model name: Rotection tubular bag machine Features: • Steel frame / stainless steel construction • Fixing of the unwinder by hand without compressed air • Automatic roll centering for precise application • Automatic stop for empty products (no product - no bag) • Simple touchscreen operation using color symbols • Continuous feeding of products through sensor control • Print mark sensor included • Safety protective covers • 3-sided weld seam packaging (fin seam) • Longitudinal welding on the underside of the bag • Rotating cross-welding system • Can be combined with upstream and downstream machines • Customer-specific changes / designs on request Additional options (on request and for an additional charge): • Thermal transfer printer e.g. best before date, print width up to 60mm • Stainless steel finish/painting • Cooling applications for ice cream packaging • Zig-zag knives, Euro hole punches etc. • Applications for shrink films (flow shrink) • Gassing units for protective atmosphere (extend product shelf life) • Automatic product feed systems, cyclic insertion systems • Perforation units (tear thread) for easy opening • Length-dependent product processing through photocell query