Used special purpose machines for sale (124)

Year of construction: 2018, condition: good (used), We sell a Klepp gas filter unit according to ATEX "e" II 3 G. The solution for permanent, optimal extraction and filtering of gaseous pollutants. Ledpfxem Ak Rmj Akqork

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, 3 production and assembly lines for rims (e-bikes) Lrsdpswulrbefx Akqek

Condition: new, Year of construction: 2023, Turning equipment to be installed in multiple types of installations. For turning large and heavy parts. Lsdper Hbu Esfx Akqerk

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. Ljdpfx Akjwhdnhoqjrk These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Year of construction: 2024, condition: new, Langut transport trolley Basic length 2900 mm support to support Max. length Length telescope 6000 mm Payload 4000 Kg Width between stanchions 1220 mm Rungeb to fold with pin Storage support for stanchions on telescopic tube Transport fixture for load forks and forks Lredpfx Aohbm Ihjkqjk Steering wheel with parking brake Painted in RAL 2000 and RAL 7021

Condition: excellent (used), Year of construction: 2022, operating hours: 95 h, functionality: fully functional, For sale: Complete industrial microwave generator system from MUEGGE GmbH (Germany), 30 kW at 915 MHz, in excellent condition with very low operating hours. This package includes the full WR975 high-power waveguide assembly, making it ideal for industrial heating, drying, food processing, chemical applications, and R&D environments. Technical Specifications Microwave Power Supply: • Output power: 30 kW • Frequency: 915 MHz • Input: 3 × 400 VAC, 50 Hz • Control interface: CAN • Colour: RAL7035 • Included: 10 m CAN cable Magnetron Head: • Power rating: 30 kW / 915 MHz • Waveguide interface: WR975 Included Waveguide Components: • 100 kW circulator, WR975 • WR975 waterload • Detector diode (for forward/reflected power monitoring) • 20 dB attenuator, Type R 412 720 Documentation: • Complete English instruction manual and technical documentation provided on USB stick. Condition: • Excellent – barely used • Fully functional and tested • Located in France Lrodpfx Aox Ex Drskqjk • Ready for immediate dispatch Applications: • Industrial microwave heating • Drying and dehydration processes • Pasteurisation and food treatment • Chemical and materials processing • Research and development Original New Price: • €109,000 (manufacturer reference) Asking Price: • Negotiable, subject to shipping and inspection

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: 0963, Oven used for sinter paste drying and subsequent cooling of printed half-bridges Lredjxm Ri Hepfx Akqek

Condition: as good as new (ex-display), Year of construction: 2015, Ultrasonic Cleaning System It is designed for 10m long heat exchanger with 1.5m diameter and weight of 30 tons. Together with internal mounted rollers and quick chemistry heating system, it is perfect for cooperation with demanding clients. Applications for the use of ultrasonic units - Industrial cleaning - High-pressure cleaning - Petro-chemical activities - Shut-down cleaning activities - Other cleaning where Year of production: end of 2015 Total working hours: 135 for diesel generator, about 40 for ultrasonic transducers From the beginning It was stored in warehouse in perfect conditions All other technical information and price can be sent upon request. Lrsdpfouigpmox Akqjk This technology is highly recommended for cleaning heat exchangers but also for small parts which high pressure methods can damage. It reduces the periods of shutdowns while cleaning, saves water and sewage.

Year of construction: 2004, condition: good (used), coil, coil edge guide Lodpemmc Uijfx Akqsrk brake load cells 12 holographic spool unwinders hot stamping unit cooling suction hood with collection bag boiler refrigerator electrical panel operator panel

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 10,000 kg, total length: 11,600 mm, total width: 2,560 mm, total height: 600 mm, input voltage: 220 V, type of input current: three-phase, input frequency: 60 Hz, TIR body/chassis repair frame for trucks and large-size vehicles TM-M60 This is a professional device designed for comprehensive repair and straightening of various body and chassis elements of trucks, delivery vehicles and cars. Thanks to its solid construction and the equipment with 6 towers with high pulling force (25 tons each), this frame allows for effective performance of advanced repairs, such as restoring the shape of damaged elements, straightening distortions or eliminating warps. High load capacity and precise tools make our repair frame perfect for professional workshops, guaranteeing speed, accuracy and reliability during repairs of large-size vehicles. Parameters: - Hydraulic pressure: 70 MPa (10000 psi) - Pneumatic pressure: 0.8 MPa - Maximum column tension: 25 tons (245 kN) - Load capacity: 50000 kg - Column working range: 360 degrees - Total weight: 10 tons - Number of towers: 6 Features: Lrjdpfx Aksvuxygeqek 1. With 6 towers, each with a maximum pulling force of 25 tons. 2. With a complete set of pushing and pulling tools, adapted to any type of straightening. 3. A lifting device with a capacity of 50 tons, which effectively repairs distorted beams. 4. With a 25 ton hydraulic arm that allows for the repair of distortions, bulges, twists, etc. 5. Four towers are 2500 mm high, and the other two are 4320 mm high. 6. Possibility to choose a color from the RAL palette. 7. Number of towers to be chosen by the customer.

Condition: used, Year of construction: 2018, functionality: fully functional, Internal dimensions 380 x 6800 mm Lredew Ud Aqspfx Akqjk

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: ALBA 350 kg/h, Steam generator 350 kg/h, 245 kW, gas burner. Incl. water treatment. Lsdpfxsw Ud Ele Akqork

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: SKF29452E, outer diameter: 480 mm, Industrial spherical roller thrust bearing SKF Explorer 29452 E SKF 29452E SKF29452E Bearing SKF 29452E EAN 7316576613395 Brand new, factory-sealed bearing, physically in stock. Technical specifications Inner diameter (mm): 260 Lredpfx Aexz Rz Sokqsk Outer diameter (mm): 480 Width (mm): 132 Weight (kg): 105.00 Code designation: 29452 E Type: Spherical roller thrust bearings Manufacturer: SKF Country: SE Sweden Availability: Shipping within 24h Minimum order (pcs): 1 Item EAN number: 7316576613395 Own transport available.

Year of construction: 1998, operating hours: 12,500 h, condition: used, functionality: fully functional, Titan 3400 free standing asphalt plant for sale Year of manufacture: 1998 Location: Poland, Silesia region Production since assembly in Poland: approx.. 3.000.000 tonnes capacity per hour: 240 t condition: fair (operatable) Dismantling costs and transport on the buyer’s side.The machine will be ready for dismantling at the beginning of 2026. Storage of plant components is not available on the sleer’s premises. If you are interested, please provide your proposed price and indicate in your enquiries the potential date on which you could collect the machine. Quick decision expected. Specification: Aggregate cold feeders 9 bins, capacity 12 m3 each Drying drum 11m long, diameter 2.8m Burner: Ammann 20 MW capacity burner type fuel: lignite, natural gas, light oil (excluding lignite silo) Bag filter, reverse air-flow type, Airflow approx.. 120 000 Nm3/h Hot bins: 6 + by-pass bin, all bins equipped with level sensors total capacity: >100 tonnes Mixer capacity 4.25 tonnes, drive 2 x 45kW. Bitumen tanks: 4 tanks, total capacity 200 tonnes thermal oil heating system Ready Mix storage system - external: skip and skip track, 4 bins: total capacity 480 tonnes, loadcells on each bin. Filler: 3 silos, total capacity 120 tonnes Recycling: cold RAP dosing system. Ledpfoxl Timex Akqsrk RAP feeder: 12 m3, belt weigh Additives: adhesive and cellulose dosing systems (excluding cellulose silo). Light-oil horizontal tank, capacity 50 000 litres. Industrial computer control system: Miprotek M4000 software. Industrial net basis on Phoenix Contact module system.

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes Ledpfxsfz Dknj Akqerk • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container Lrjdofz I R Ropfx Akqsk

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Ledpfx Akofz I Sysqork Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. Ledefz Ndyspfx Akqsrk ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, Transport systems Lodpofz I Edjfx Akqjrk Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Touch control Lrjdpfxsfz A Iwj Akqjk ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 101, Eddy current tester with automatic shaft inspection Lrodpfx Ajx Ezkhokqsk

Year of construction: 2017, condition: used, functionality: fully functional, The press was operated from 3/2017 until 2022 when was professionally dismantled. It is stored in a protected warehouse, in Kirov, Russia. The press was operated for a maximum of 6 days a week in 2 shifts. It was sold more than 60,000 large washbasins produced on this press. Price of 280 000 EUR. The owner of the press is Dřevojas, Czech republic. Price for new machine was 456 000 EUR. Width: ~4920 mm Length: ~14020 mm Ledjrt Tw Djpfx Akqsrk Height: ~3085 mm Weight: ~45 ton (product purchase trolley group and moulds are not included) Max Mould size: 1000mmx1700mmx650mm Max mould number: 8 Horizontal or 12 Vertical Energy: 380 V Air: 16 bar Cudtjikx Water (45°C): 4 bar (min.) Water (70°C): 3-4 bar

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: FULL CNC MAKİNE PARKURU, • Enables production of 200 - 220 windows in an 8-hour working shift. • This set provides customers with rapid production capability thanks to various machine configurations. • Available in 380 Volt or 220 Volt options. • Compliant with CE (European) standards. • Door-to-door delivery prices to any location worldwide. • References available from previous clients in your country. • You can choose different machines from our catalogue and create custom combinations. • All machines are covered by a 2-year warranty. Lrsdsrfy Idopfx Akqok MACHINE LIST • SC 4000 S Fully Automatic Servo Motor Double-Head Aluminum & PVC Cutting Machine ( Ø550 mm saw blade) • SC 5000 S Aluminum & PVC 3-Axis CNC Milling Machine • SC 521 S Triple Water Drainage Opening Machine with High-Frequency Motors • SC 100 Double-Head Welding Machine • SC 6000 S CNC Corner Cleaning Machine (2 Axis) • SC 211 Aluminum & PVC Mullion End Milling Machine • SC 301 S Aluminum & PVC Glazing Bead Cutting Machine (No Mould Required) • SC 902 S Hydraulic Aluminum Corner Crimping Machine • SC 801 Air Compressor (500 Litre) Please request our catalogue for further details. We can provide worldwide door-to-door delivery.

Year of construction: 2017, operating hours: 1 h, condition: used, functionality: fully functional, INTEGRATED DRYERS AND PELLETING SYSTEM WOOD SHAVINGS DRYING OLIVE POMACE DRYING FULL AUTOMATION WITH VARIABLE SPEED MOTORS STAINLESS STEEL FEEDING AUGERS Lsdpew Hgbhofx Akqsrk CONVEYOR TRANSPORT SYSTEMS FUEL AND PRODUCT FEED BUNKERS 9 METER STAINLESS ROTARY DRUM 15 METER IRON ROTARY DRUM 8 MILLION KCAL SOLID FUEL BOILER WITH FULL CAPACITY, IT HAS THE LARGEST WOOD SHAVING DRYING CAPACITY IN TURKEY AT 15–20 TONS/HOUR. IN ACCORDANCE WITH EUROPEAN STANDARDS FOR DETAILED INFORMATION, PLEASE CONTACT US