Condition: used, Year of construction: 1976, wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 (100) mm output: 300 St./min. Dueb E Tskk Exj N Hyst

Condition: excellent (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 1/90, working width: 1,200 mm, welding power (max.): 400 kVA, wire diameter: 4 mm, usable width: 1,200 mm, type of input current: three-phase, mesh size: 25 mm, I will sell a mesh welder. The machine is fully automatic, both longitudinal and transverse wires are dropped. The machine underwent a major mechanical overhaul in 2025 - all damaged elements were replaced - bearings, seals, bushings and other elements that are subject to wear and tear. The hard drive in the computer used for programming was replaced with a new one in 2024, and a software backup was made. Main features of the machine: - the machine is equipped with a torsion beam - the welding section can rotate relative to the mesh - maximum dimensions of the open mesh - 1200mm x 2000mm (after modifying the feeder guides, it is possible to increase the mesh width to about 1400mm) - minimum mesh mesh (between the longitudinal wires) - 25mm - in the case of other dimensions, a plastic template for other mesh spacing must be made - the places where the longitudinal wires are dropped are set mechanically - it greatly simplifies programming - the mesh meshes between the cross wires are moved using a servo drive and are set in the program - wire adjustment range: 2.5mm - 10mm - the machine is equipped with 2 longitudinal wire feeders that work simultaneously - it is possible to drop two different wire diameters Deb E T N Hev Duabjysut - the machine is equipped with 4 100KVA transformers and 5 welding actuators - it also has both longitudinal wire presence detection and cross wire after dropping - if there is no wire, the machine will stop - the finished mesh is received and dropped automatically - programming is done in dedicated software on a computer with Windows, the program is written in text and uploaded to the PLC controller After being brought to Poland, the machine was started and worked. It is currently renovated, dismantled and ready for transport. The machine is accompanied by full mechanical and electrical documentation. A film showing the machine abroad before dismantling: youtu.be/Pb6dEFNO7zo A film showing the machine already working in Poland: youtu.be/32LeeVx0ZeA

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, Lattice girder cutting system with lifting lift and storage system Make Progress, type GTA 91/S, built in 2008 Consisting of: hydraulic lattice girder shears with measuring table length 8 m and lattice girder buffer Storage system with 14 compartments (2 opposing vertical lattice girder rack storage) and double-sided lifting lift Dujb E Tjvxgbmj N Hyet 1 control cabinet, 1 control panel with screen, manuals System can be inspected during operation at our factory Dismantling by buyer required from the end of 2025

Condition: refurbished (used), Drawing machine FRIGERIO RT560.9 Max INLET wire diameters – 6.00 / 5.00 mm OUTLET wire diameters – 1,50 / 1,60 mm Line is suitable for low and middle carbon wire. Line composed of: - vertical payoff, composed of tilting pole + 2 hydraulically tilting reels - dry drawing machine 9 steps, complete with 560 mm diameter capstans with ceramic coating. Dujbev Dvdhj E T N Hyjt Fixed type wire drawing cassettes, complete with rotating mixer. 9 new AC motors of 37 KW. - horizontal axis spooler DIN800, hydraulic. - new AC electrical panel of the SEI SISTEMI brand. new electrical machine bord all components SIEMENS Inverter – SIEMENS G120 Siemens S7 con CPU 1510

Year of construction: 1995, Condition: ready for operation (used), Two Wenzke rewinders are available. 1) Wenzke PM 1000/DC-S (heavy version), max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1995. 2) Wenzke PMS 500, max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1988. Documentation partially available. On-site inspection is possible. Individual sale possible. Djb Ejun St Ns T N Hyout

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, Loading capacity: max. 300 Kg. Djbef S I I Ho E T N Hyeut Diameter of decoiler: 1.000 mm Diameter of spool: max. 900 mm Inside diam of spool: 240 - 560 mm Hight of spool: max. 180 mm

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, Wire straightening, cutting and laying machine with crimping device Make Progress, type MSR16, built in 1999 Consists of: Straightening machine (5 rotors: d 6-14 mm), cutting and laying unit 5 electrically driven and braked reels, including substructure. Outlet 2BK/e length 9 m with crimping device and chain magazine for rear ejection Pair of cross-transfer units for pallet movement 1 control cabinet, 1 control panel with screen, manuals Duob E T Nsvxf Sds Hyot System can be inspected during operation at our factory Dismantling by buyer required from 01/07/2025

Year of construction: 1981, Condition: ready for operation (used), Including documentation. Djbei Athvo E T N Hyout

Condition: good (used), Year of construction: 1990, loading capacity: 2.000 Kg. diameter of decoiler: 1.400 mm outside diameter of coil: max. 1.300 mm inside diameter of coil: min. 400 mm hight of the coil: max. 800 mm Dob E T Njid Sgme Hyjut

Year of construction: 1995, Condition: ready for operation (used), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a scenker spring device. The motor and drive of the machine are defective. Documentation available. Duob E Tevripmj N Hyot

Condition: excellent (used), Year of construction: 2004, loading capacity: max. 1.500 Kg. Deb E T Noipv R Ts Hysut wire diameter range: 2,0 - 8,0 mm table diameter: 1.100 mm

Condition: ready for operation (used), Year of construction: 1983, There are one Somavis T-8K and one T-8L available, max. working diameter: 6mm, max. shaft length machine 1/ 2: 80/ 100mm, output: 200-600/min. Dujb E T Neqwi Iuj Hyjt

Condition: used, Year of construction: 1984, Functionality: fully functional, Wire thickness range: 2.0 - 10.0 mm Feed speed: 7 - 10 mtr/min Debjqy A I Ee E T N Hyeut

Year of construction: 1993, Condition: ready for operation (used), Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools. Debsn I T Tgs E T N Hyjut

Condition: excellent (used), Year of construction: 2004, BIHLER Control System P-CNC 400 for BIHLER MC 42 consist of: Dujb E T N Hoikiwkeyot Control cabinet complete with SIEMENS SIMODRIVE Operator panel T 1 BIHLER P-CNC 400 Operator panel T 2 BIHLER P-CNC 400

Year of construction: 2016, Condition: ready for operation (used), Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes. Djb E T N Hjn R Nhqsysut

Condition: ready for operation (used), Year of construction: 1979, welding capacity: max. 70 kVA Dusb Esdzudze T N Hyot

Year of construction: 1998, Condition: ready for operation (used), Number of coil carriers: 12, rotor speed: 450/min, coil volume: 550cm³, wire tension: 1-16N, pitch: 5-90mm, connected load: 5kVA, with documentation, is already dismantled. Dusb E T Njpgycij Hyot

Condition: excellent (used), Year of construction: 1987, Loading capacity: max. 100 Kg. outside diameter of the rolls: max. 600 mm Duebsfgd S Se E T N Hyjt inside diamter of the rolls: min. 200 mm

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Gripper feeding system right hand side 1 Eccentricpress 90 kN 2 Narrow-slide-units 3 Standard-slide-units Working range: Dobepq H Upj E T N Hyjut Wire diameter range: 0,5 - 3,5 mm Stripmetal width: max. 32 mm Feeding length: max. 170 mm Output: max. 250/min.

Condition: excellent (used), Year of construction: 1977, Functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. gripper feeder system left hand side 1 pce. Eccentricpress 70 kN 1 pce. Campress 3 pcs. Standard slide units 2 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm Dusb Eerpk Axo T N Hyjt strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: excellent (used), Year of construction: 2010, loading capacity: max. 1.500 Kg. Dusb E T Nevck Huo Hyjt wire diameter range: 0,5 - 6,0 mm coil outside diam. max. 1.000 mm speed: 0 - 80 U/min

Condition: excellent (used), Year of construction: 1995, Chamfering unit, suitable for BIHLER GRM 50 or GRM 80 Dob Eoi Tza Us T N Hyeut wire diameter range: 2,5 - 5,5 mm

Condition: excellent (used), Year of construction: 2001, loading capacity: max. 2.000 Kg. wire diameter range: 0,8 - 8,0 mm table diameter: 1.300 mm coil outside diam. max. 1.250 mm coil inside diam. min. 320 mm Duob E T N Hju S Eqhjyet coil hight: max. 1.000 mm speed: 0 - 80 U/min

Condition: ready for operation (used), Year of construction: 1971, laoding capacity: max. 250 Kg. Duob E T Nsdx Rzmj Hyst coil diameter: max. 650 kg. strip metal width: max. 100 mm