Double girder overhead traveling crane

ABUS ZLK

Year of construction: 1984, condition: used, weight max. 20 t clamping width 15065 mm stroke / mm ABUS electric wire rope hoist type: GM5200H6 - 161.41.103.D Span width: 15065mm Rope - nominal diameter: 14.0 mm Rope length: 47.95 metre Nsdpfx Afoudditjzscl Construction: Special electric hoist rope SKZ 8-P Surface of wires: galvanised Construction: low tension Type of lay / direction of lay: cross lay / right hand lay Nominal strength of single wires: 2160 N/mm² Calculated breaking load: 240.0 KN Minimum breaking load: 209.5 KN Number of load-bearing wires in the outer strands: 152 Trolley Year of manufacture: 2007 Trolley track: 1600mm Trolley weight: 1260kg Number of wheels: 4 pieces Running wheel diameter: 200mm Running wheel rotation: 52mm Operation: Floor operation via push-button switch Control: Electric Cross travel trolley Speed: 5.0/20.0 m/min Power: 14 /.65kW Duty cycle: 20/ 30 %ED Protection class: IP 55 Brake: Disc brake Lifting gear Speed: 4.00 / .66 m/min Power: 15.10 / 2.40 kW Duty cycle: 30/20%ED Protection class: IP 55 Brake:Disc brake

Condition: good (used), Year of construction: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control system: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel paths X-axis: 300 mm Travel paths Y-axis: 300 + 100 mm Travel paths Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Admissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): CNC Machining Center Fanuc Robodrill α-T21iFa Coolant pump and chip tray Nodpfxsxflxae Afzocl Exact scope of delivery as per photo series The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel paths of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, the machine offers versatile machining capabilities. The 21-position tool changer ensures flexible production processes and minimizes setup times. The spindle achieves speeds of up to 10,000 rpm, enabling both fine machining and powerful cutting operations to be performed efficiently. The Fanuc Series 31i-Model A5 control system provides user-friendly and reliable programming. With a maximum workpiece load capacity of 200 kg and a compact construction, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness, or currency of the information provided.

Condition: good (used), Year of construction: 1984, Overhead crane, crane, trolley, crane running gear, crane travel gear, girder travel gear, head girder for bridge cranes, ceiling crane head girder, head girder for single-girder bridge crane, head girder for double-girder bridge crane, double-girder traveling crane -Manufacturer: ABUS, 1 set of end plates for double girder overhead traveling crane Nodpfx Afjvt Rapjzscl -Type: ZLK -Drive motor: ABUS 0.12/0.55 kW -Carrier rollers: Ø 200 mm / groove width 60 mm -Dimensions: see photo technical drawing -Transport dimensions: 2970/855/H720 mm -Weight: 640 kg

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Little used / Under power / Direct availebel Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Nsdpfx Asxmf R Sofzjcl Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, VOLLMER CHC eco carbide circular saw sharpener from 2008 in excellent condition. For sharpening the face and back of blades up to 850mm. Operates with full oil. Oil mist extraction. Back grinding wheel, face grinding wheel, blade centering. Delivery, installation, and training possible. Ncjdpfowycmaox Afzjl

Condition: excellent (used), HSS saw grinder LOROCH model Ekostar 760 year 2008 Njdpfjw Hrvqsx Afzjcl

Condition: used, 5tSWF Krantechnik GmbH Ncodpfx Afedc A R Tozol

Condition: used, functionality: fully functional, overall weight: 6,410 kg, total length: 19,250 mm, load capacity: 10,000 kg, main lifting speed: 800,000 mm/min, Equipment: documentation/manual, Bridge Crane Nedpfx Afox I Aapozecl Manufacturer: ABUS Model: ELK Span: 19,250 mm Lifting Capacity: 10,000 kg Operation via HBC radio remote control and pendant control possible Complete documentation available CE

Condition: new, table length 2200 mm table width 1500 mm stroke height 1900 mm weight max. in kg 3000 kg total power requirement 1,5 kW stroke speed - idle stroke upwards 55 sek. stroke speed - idle stroke downwards 30 sek. Nedpovn U D Isfx Afzocl connected load frequency 400 V weight of the machine ca. 0,650 t dimensions of the machine ca. 2,2 x 1,5 x 0,3 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: used, Tool presetter EZSET EZ400 Ncedpfjuhb Stox Afzjl