Compressed air dryer 10.38 m³/min

ALMIG ALM-RD 660

Condition: excellent (used), functionality: fully functional, maximum load weight: 2,500 kg, lifting height: 17,000 mm, Year of construction: 2022, operating hours: 1,522 h, This unit is in very good condition – operated exclusively by our staff. When buying from the exclusive distributor, you are assured of the quality of the machine, as well as guaranteed spare parts and service support. A presentation or rental can be arranged on request. Dwedpfewnd Nlsx Apwea Key equipment details: The M250 model is currently the most popular crane in Poland for aluminium joinery installation above 10 m. It stands out among competitors primarily due to: - More powerful YANMAR diesel engine compared to the popular Maeda mini crane - Fully hydraulically telescoping jib ready for immediate use - Radio remote control as standard (brand: Scanreco, renowned in top-class machines worldwide) - Horizontally extending tracks (in competing models, the tracks extend at a 45-degree angle, which increases the crane’s height at maximum width) - The strongest searcher hook available for the main boom on the market (2000 kg) - Rope reeving attachable to the boom as needed. If the rope block is not required (work with the searcher hook), the end of the rope is secured to the side of the main boom. - Very compact design (all cables and sensors are integrated inside the boom) This listing is for a BG Lift M250 mini crane including equipment: • 900 kg winch (65 m) • Electric motor (single phase – 220V) • Hydraulic jib • Searcher hook (for the jib) • Pulley block (single rope) • Pulley block (triple rope) • White tracks Engine hours (diesel): 11,522 Engine hours (electric): 321 M250/2

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Dedpfexp Rb Iox Apwowa

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: TWT381P3 - 2200374274, cooling capacity: 72.2 kW (98.16 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,385 kg, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 12.3 m³/h, pump pressure: 3.46 bar, total width: 1,150 mm, total length: 2,790 mm, total height: 2,020 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Special process water chiller / refrigeration unit / water-cooled chiller, Type: TWEevo Tech 381 P3 Manufacturer: MTA S.p.A. TWEevo Tech 381 P3 are water-cooled compact chillers suitable for indoor installation. Including crankcase heater, phase monitoring, 60 l buffer tank, and built-in P3 pump. Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 72.2 kW [20.5 tons of cooling] Chilled water outlet/inlet temperature (°C): 7 / 12 Flow rate (m³/h): 12.3 Available pump pressure (bar): 3.46 Cooling water outlet/inlet temperature (°C): 45 / 40 Refrigerant: R 410A Dwedpfjwqfh Uox Apwsa Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power input (kW): 39 Max. current (A): 66 Starting current circuit (A): 234 Protection class: IP54 Dimensions: Length (mm): 2790, Width (mm): 1150, Height (mm): 2020 Weight empty/filled (kg): 975 / 1385 Connection: Rp 2 1/2" Serial no.: 2200374274 Year of manufacture: 2021 Condition: Visual 2, technically ok Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty Used machines may have visual defects due to usage. (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Dodpfxehwrk Ts Apwewa Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Dwjdpfx Apeig T Amowea Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Year of construction: 1997, condition: used, machine/vehicle number: 540897, pipe diameter max. 1,500 mm tool diameter max. 200 mm feed rate 40 mm / min Dwedjghy Azjpfx Apwea sawing of pipes in steel and greycast iron  with wall thickness of up to 22 mm  milling of pipes in steel and grey cast iron with wall thickness of up to 15 mm cutting speed 35 m / min compressed air requirement 6 bar - 2m³ / min weight approx. 90 kg

Condition: new, Year of construction: 2026, Robotic gantry system for metal sheet and profile cutting 3D robotic gantry system for plasma and oxy-fuel cutting has double-side drive, precise positioning system by racks and pinions on the 3 linear axes with exceptional speed and dynamics. Zero-backlash on the 3 rotational axes allow 4-side machine processing of profiles and round tubes. Precise gearboxes with minimum backlash, dynamical engagement of the motors to the racks, and rigid guide system allows smooth movement, excellent cut quality of corners and small holes. The gantry system has a cantilevered part crossbeam, which allows profile cutting in a cabin especially designed for this purpose. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 1500 mm Beams and profiles types: T, L, H, U, rectangular tube, round tube Dwedpfx Aeh I Nw Dopwea Maximum dimensions of beams: Width up to 1200mm Rectangular tubes: Cross-section up to 600x600mm KEY FEATURES ▪ Stable metal construction with precise linear guides and servo-drives with racks and pinions on all axes; ▪ High dynamics, on all X, Y and Z axes: up to 30 m / min speed and acceleration up to 3 m / s²; ▪ 3D control on seven axes allows for a higher level of CNC programming; ▪ Maximum use of machine resources, thanks to the concept of combined processing of sheets and profiles - the ability to 100% load the machine when switching between sheets and profiles, without downtime for loading sheets and profiles and unloading cut parts ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Condition: good (used), Year of construction: 2012, Machine is in good working condition. Dwedpfjylx Hrox Apwoa

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: Dedpfeun R N Asx Apwswa ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Year of construction: 1994, condition: good (used), machine/vehicle number: S 2645, Offer 22347 Technical data: - max. working width 4050 mm - max. cutting capacity St 40 6 mm - adjustable cutting gap - number of strokes depending on cutting length approx. 20 - 25 per minute - rear stop with positioning control ELGO 10 - 750 mm - cutting length adjustment - hydraulic clamping device - front angle stop - front support arms, laterally adjustable - drive 400 V / 15 kW - foot pedal Djdpeibmaxsfx Apwowa - space requirement without support arms approx. W 4850 x H 2000 x D 2300 mm - weight approx. 10800 kg