Screw compressor as new

Atlas Copco g 7 ff

Condition: new, Year of construction: 2026, overall weight: 227 kg, MANUFACTURER: ATLAS COPCO MODEL: G7FF Serial No: ITJ036731 Year: 2026 Gedpfxoy E Htbe Amysbl Power (kW): 7.5 Output (m³/min): 1.00 Pressure (bar): 10 Operating hours (documented/total): 0 Frequency inverter: NO Built-in dryer: YES – R513a 0.32kg Heat exchanger: NO Cooling (air/water): Air Mounted on tank: YES, 500L Documents: YES New/Used: NEW

Condition: used, Year of construction: 2019, CNC Gantry Plasma Cutting Machine Gbsdpfxjxnmbnj Amyel Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m 'Plasmarotator MasterCut' with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source TEKA filter unit ä12526

Condition: new, volume flow: 0.984 m³/h, Atlas Copco G7FF 500 lt screw compressor NEW Specification: • condition - new • manufacturer - Atlas Copco • capacity - 984 l/min • main engine power - 7.5 kW • tank - 500 l • maximum operating pressure - 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • user manual in Polish • weight - 227 kg Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service Gbedohkttpepfx Amyel • available within 7 working days

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2024 Working area: 1,500 x 3,000 mm Gedpfjytqmmsx Amyebl 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filter unit for outdoor installation 1 x nesting software on the machine control Availability: immediately

Year of construction: 2007, condition: good (used), machine/vehicle number: 164883, OFFER 17015 Technical data: - BIA approved welding extractor - Articulated extraction arm 3000 mm - air volume flow approx. 1000 m³/h Gbjdpfx Aehw Ev Ssmyel - max. static pressure 2700 pa - filter area approx. m² - filter control light for filter change - separation efficiency 99,9 - compressed air connection 6 bar - drive - fan 400 V / 1,5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Year of construction: 2012, condition: used, Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor -Manufacturer: Kemper, mobile welding fume extractor type 82150 -Drive: 1.5 kW Gbsdehmqm Ijpfx Amyel -Volume flow: 1000 m3 / h -Extraction arm: O 160 mm x 4200 mm -Transport dimensions: 655/910/H1470 mm -Weight: 194 kg

Year of construction: 2025, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, The cleaning system utilizes the latest and most advanced technology for precise surface cleaning available on the market. The high energy efficiency and instant heat generation of the laser produce an explosive effect on the material’s surface, effectively vaporizing and removing contaminants and unwanted residues—contact-free, environmentally friendly, and efficient. Gbedpfoyffdkox Amyel Compared to traditional industrial cleaning methods, laser cleaning offers numerous advantages: it is eco-friendly, highly efficient, space-saving, flexible, and easy to operate—making it increasingly preferred by companies.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2016 Controller: IMSNC Cutting table: 3000 x 1500 mm Extraction channel left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 – 160 A Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process management with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition, and the power source • Display of operating statuses and error messages via LED and display • Analog and serial interface for adaptation to CNC controls • Infinitely variable adjustment of cutting current from 10–160 A; marking current from 5–25 A • Optimal piercing due to stepless delay time for main arc and adjustable current rise • Adjustable current reduction at corners, as well as at start and end signals from guidance systems • Automatic display of preset cutting current • Serial data transfer for PC-based diagnostics Plasma Cutting Technology Contour Cut • Further development of HiFocus technology for carbon steel • Optimized for cutting fine internal and external contours Gbsdpfx Amsyzy S Aeysl • High cut quality and contour precision • Holes with angle tolerances according to DIN EN ISO 9013 within range 2-4 • Low angle deviation and smooth cut surfaces • Very good repeatability and dimensional accuracy • No time-consuming post-processing—high productivity, reduced costs • No additional equipment or software required, and no new wear parts necessary • Supplied as standard Plasma Torch PerCut 200/210 • PerCut 200 machine plasma torch for standard applications and high-precision bevel cutting • Quick-change torch PerCut 210 with threaded connector for fast and comfortable setup • Special torches available for custom applications • Higher cutting speeds reduce cost per meter cut • Long service life of consumables conserves resources • Narrower kerf for less emission and waste • Significantly lower gas consumption compared to the competition through efficient liquid cooling up to the nozzle tip • Lower noise level due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Technical Data: Power source: HiFocus 161i Connection voltage: 400 V; 3-phase; 50 Hz Max. power consumption: 28 kVA (100% duty cycle) Line fuse: 50 A (slow-blow) Protection class: IP 22 Open circuit voltage: 330 V Cutting current: 10–160 A (100% duty cycle) Marking current: 5–25 A (100% duty cycle) Cutting range: max. 50 mm, recommended 0.5–38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma Machine Torch: PerCut 200 Quick-change torch: PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 20,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, positioning speed: 40 m/min, workpiece weight (max.): 35,000 kg, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, NS-12020H PROFILE STEEL LASER CUTTING AUTOMATION LINE Technical Specifications Laser Power: 12000W-20000W X-axis Travel: 3500mm Y-axis Travel: 28000mm (customizable) Z-axis Travel: 800mm A-axis Travel: ±90° C-axis Travel: ±90° U-axis Travel: 30mm Maximum Speed: 40m/min Positioning Accuracy: ±0.1mm Main Features： Simple and Stylish Integrated simple structure with a mobile design. Features a main control panel, laser unit, chiller, electrical cabinet, and cantilever beam structure, all highly integrated for stable mobility and operation. Gbodpfjvmwxxex Amysl Quality Assurance Precision calibration and compensation of steel profiles. Enables automatic positioning and error detection of steel profiles. High positioning accuracy, low sizing error, and a 100% one-time through-hole rate. Increased Efficiency, Reduced Costs Professional material-checking software enables one-click nesting. Optimizes cutting sequences based on raw materials and component specifications. Automatically joins leftover materials to minimize waste and reduce costs. All-in-One Service Powerful 3D five-axis CNC technology. Supports profile cutting and 45-degree bevel cuts. Adapts to various cutting processes for different applications. Enhanced Quality and Efficiency Seamlessly integrates with TEKLA steel structure design software for professional and efficient operations. Reduces complex modeling processes and saves time on manual drawings. Enables one-click generation of component process codes to significantly boost production efficiency. Smart Management Automated loading and unloading system for streamlined feeding and cutting. Fully automated one-stop workflow. Efficiently completes bulk operations, reducing manual intervention and labor costs.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Gbedpfx Aey Nd Hyemyol Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)