Screw compressor GA45VSD

Atlas Copco GA45VSD

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Njdexdc Uvopfx Alcowh

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Nwjdpeu Rptyefx Alceh Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: good (used), Year of construction: 2007, overall weight: 1,400 kg, volume flow: 522 m³/h, pressure (max.): 12.8 bar, Equipment: refrigerant dryer, PROD. ATLASCOPCO TYPE GA45VSDFF YEAR 2007 CAPACITY (kW) 45 45kw OUTPUT (m3/min) 8.7 CIS (bar) 12.8 INVERTER yes BUILT-IN DRYER yes EXCHANGER no Nwedpfx Ajvrg R Uolceh COOLED (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 1590, Equipment: cabin, hydraulics, Zenith Machinenfabrik GMBH Neunkirchen/Siegerland GERMANY Used for production of concrete vibropressed pavement and borders. The machine is fully functional and it comes togheter with 2 mixers, bunkers for aggregates, skippers, packaging machine and 150 pallets for production. Nwedpfxeucruuj Alceh It also has included molds for different pavement models. We also have to sale a Mobil Zenith 941 II A from 1978 which also has the identification plate attached. The machine is beeing sold because it was replaced with newer techonology.

Condition: excellent (used), functionality: fully functional, power: 104 kW (141.40 HP), overall weight: 2,400 kg, fuel type: diesel, axle configuration: 1 axle, emission class: euro5, Year of construction: 2019, operating hours: 511 h, Delivery rate: 10.9 to 9.7 m³/min Engine manufacturer: John Deere 4045HCF05 Engine power: 104 kW Emission stage: V Compressor control: Xc 2003 Dimensions: 4,940 x 1,807 x 1,960 mm (L x W x H) Fuel tank / AdBlue capacity: 168 / 17.6 liters Maximum weight: 2,400 kg Compressed air treatment system consisting of: compressed air aftercooler, water separator, and PD filter Operating pressure: 5 to 14.2 bar Nwodpoy Sz Slofx Alcsh Hitching device: car trailer hitch ball coupling 50 mm / DIN towing eye

Condition: used, Year of construction: 2019, power: 30 kW (40.79 HP), volume flow: 4.95 m³/h, pressure (max.): 12.75 bar, Atlas Copco AQ30VSD FF Air Compressor Manufacturer: Atlas Copco Model: AQ30VSD FF Year of manufacture: 2019 Country of origin: Belgium Maximum pressure: 12.75 bar Power: 30 kW Free air delivery: 4.95 m³/min Air flow rate: 82.5 l/s, 174.8 cfm, 4.95 m³/min Motor power: 40 HP Motor speed: 8,600 rpm Weight: 702 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Control system: Elektronikon Graphic Equipment: SMARTLINK Nwodpfx Aexk U Arslceh Origin: Made in Belgium No liability is accepted for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air Nwjdpfsychqzjx Alcjh 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: excellent (used), Year of construction: 2013, operating hours: 1,165 h, ATLAS COPCO COMPRESSOR XAS87 5,00m3 13r !!! Compressor DIESEL ATLAS COPCO XAS87 machine after service Technical data: capacity 5.00 m3/min; working pressure 7 Bar; year of production 2013; engine; KUBOTA mileage 1165h!!! compressor fully operational,ready to work,we give warranty net price: 39800 zł Nodpfxotu E Eyo Alcswh gross price: 48954 zł Below is a link to the video , showing the work of the machine

Condition: new, Ostas Profile Ring Bending Machine OPK 125 Technical Specifications: • Tool holder, shaft: 120 mm • Tool: 390 mm • Working speed: 2-7.5 m/min • Motor: 15 kW • Dimensions (L-W-H): 2000 x 1700 x 1950 mm • Weight: 4850 kg • 3 rollers are driven separately by a hydraulic motor and planetary gearbox • Hardened standard rolls • Hardened and ground tool holder, shaft Nedpfx Aoxrd Rnelcowh • Mobile control panel • Horizontal and vertical working position • Hydraulic side supports • Digital displays (2 pcs.) • In accordance with CE standard

Condition: ready for operation (used), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible. Nsdpowwlkiefx Alcowh