GA90 screw compressor

Atlas Copco GA90

Condition: ready for operation (used), functionality: fully functional, 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Ibjdjxl Hxbepfx Agzjf Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L

Condition: used, An automated die-cutting press in 72 x 102 cm format Equipped with: Max. sheet size: 720 x 1020 mm Min. sheet size: 350 x 400 mm Pressing force: 2.5 MN (250 tons) Feeder and delivery without gripper bands Max. speed: 7,500 sheets/hour Quick-change system Suction head feeder Cutting area Stripping area and waste removal In good condition Ibjdswvmgijpfx Agzef

Condition: good (used), Year of construction: 2000, Screw compressor Ibodpfevi E Uyjx Agzsf Manufacturer: Atlas Copco Type: GA 90 Year of construction: 2000 Power: 94 kW Pressure max: 10 bar Speed: 1,487 rpm

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Noise Level Drive Type Integrated Dryer Voltage Dimensions (L×W×H) Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance Ibjdpfjxx Snbjx Agzof IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: WORKING

Condition: ready for operation (used), Refrigerant compressors system Bitzer Type: 4EES-4Y-40S (x3) Volume: 22.7 m3/h (x3) Cooling capacity for R404A: 43 kW at -5°C/40°C 35 kW at -10°C/40°C, 18 kW at -25°C/40°C Dimensions: 1600 x 850 x 1300 mm Items in magazine: 1 Ibodpfx Astlpp Ssgzef Reference number: Z 73 Condition: Used in good condition + Control panel (800 x 400 x 2100 mm) + Condenser (2550 x 1050 x 1200 mm)

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, Compressor in excellent condition, rewound motor. The machine is operational and tested. Technical specifications: Ibedpfsxn Sw Isx Agzof Max pressure: 10 bar Power: 90 kW - 110 HP Capacity: 16,200 liters/min

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AIF074692, power: 90 kW (122.37 HP), operating pressure: 9 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA90 FF compressor is a reliable and efficient solution designed to meet demanding industrial requirements. As an oil-lubricated model, it uses oil to ensure optimal performance and enhanced durability. Although this unit is pre-owned, it retains the quality and robustness typical of the Atlas Copco brand. Ijdpfx Aexnz Nasgzobf With impressive rated power, the GA90 FF is perfectly suited for industrial applications where a consistent and reliable air supply is essential. Its integrated design facilitates easy installation and maintenance, reducing downtime and increasing productivity. Ideal for those seeking performance and reliability, the GA90 FF remains a top choice for industrial environments that require intensive compressor use.

Condition: excellent (used), consisting of: 2 pcs. Art. No. 47155: Makro Grip 125 Centering Vise, clamping range 155 mm 1 pc. Art. No. 41350: Extended Stamping Unit 1 pc. Art. No. 41010: Center Marking Device for Stamping Unit 16 pcs. Art. No. 45570: Mounting Bolts, diameter 20 mm 1 pc. Art. No. 47520: Double Mounting Body 1 pc. Art. No. 47355: Makro Grip 125 Centering Vise, clamping range 355 mm 1 pair Art. No. 44251: Avanti Base Jaws 4 pcs. Art. No. 44258.76: Top Jaw 77x126mm for Avanti 125 4 sets Art. No. 45570.10: Spacer Mounting Bolts, diameter 20 mm 2 pcs. Art. No. 47255: Makro Grip 125 Centering Vise, clamping range 255 mm 3 pcs. Art. No. 45742: Plate L384xW384xH27 mm, 4-position grid plate 96 (photo attached) Ibjdpfx Aexauacjgzsf 1 set Art. No. 47355-TG27: Twin-Grip Conversion Kit for Makro Grip 125 No. 47355 1 pc. Art. No. 47520: Double Mounting Body 1 pc. Trolley for Stamping Unit

Condition: excellent (used), Year of construction: 2015, operating hours: 67,310 h, functionality: fully functional, 90 kW at 7.5 bar and 16.87 m3/min. Isdpfewfckcsx Agzsbf Built in 2015 with approximately 67,310 hours.

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Ibodpexmkc Tofx Agzef

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 400 mm z-travel 400 mm control MSX 501 Mori Seiki Ibjdpfx Aev Az Ucegzof table surface area 700 x 450 mm max. table load 350 kg number of T-slots 4 T-slot - width 18 mm T-slot - distance 100 mm Number of revolutions 12.000 U/min power capacity - main spindel 18,5 / 15 / 11 kW tool taper BT 40 max. Torque 110,5 Nm diameter of forward milling spindle bearing 70 rapid travel x/y/z 20.000 mm/min feed speeds 1 - 20.000 mm/min Tipp feed 15 Steps / 0 - 1.260 mm/min Number of Toolpositions in magazine 40 Pos. Max. mould width 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 8 kg change-time chip to chip 2,8 sec change-time tool to tool 1,0 sec total power requirement 34 kVA weight of the machine ca. 7,2 t dimensions of the machine ca. 2,8 x 3,0 x 2,9 m Machining Center Vertical MORI SEIKI - NV 4000 DCG - ca. 14.000 Operating-Hours

Condition: excellent (used), Year of construction: 2017, operating hours: 28,625 h, functionality: fully functional, Premium screw compressor Atlas Copco GA90+. 90 kW, 8.5 bar with 16.50 m3/min. Only 28,625 operating hours. Iedeuqanaopfx Agzjbf With heat recovery, new compressor oil and new oil filters.

Condition: excellent (used), Year of construction: 2006, Atlas Copco GA 90 FF With integrated refrigerant dryer. Refrigerant R 404a. Ibjdpfx Agjrk Nuyozjf

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded Ibodod Dzahopfx Agzjf 420 x 250 x 100mm completely welded housing Ring eyelets for suspension

Condition: excellent (used), functionality: fully functional, We currently have over 15 Atlas Copco GA90 units in stock in various configurations. Frequency-controlled. With integrated dryer. Ibodpfxjxctxio Agzjf