Second-hand machinery for sale (2,398)

Condition: good (used), last calibration Aug 2024 Cobu Usv Rw Eyjiyhsgt

Year of construction: 2022, Condition: good (used), Serial number 11261, 6-piece set - Subject to prior sale - Cgjbu Uiewazp Toyhet +++ Please note: This machine is part of an online auction! +++

Condition: good (used), Functionality: fully functional, 30-foot flat rack container platform, equipped with 4 container locks and various lashing points, length 30 feet (approx. 9.12 meters), weight approx. 4,000 kg Cgebov Hakqou Uiyhst

Year of construction: 2019, Condition: like new (used), overall weight: 947 kg, working width: 320 mm, input voltage: 400 V, roll diameter: 330 mm, machine/vehicle number: A7X5023000109, - Printing width: 320 mm - Roll width: 330 mm - Resolution: 1200x1200 dpi x 8bit 1200x3600 dpi Cgobu Uiyep S N Snshjt On 07.09.2022 - after disassembly and transport to the warehouse, it was checked by the service department, which found no deficiencies, or damage. The whole set consists of an unwinder, printer and rewinder, which allows you to print most self-adhesive media. - Media feeding speed: 19m/min, 13.5m/min, 9.45m/min. - Speed depends on the type of paper - Dimensions: 3869x1480x1138 mm - Weight: 947 kg - Power supply: 400 V/50 Hz

Condition: good (used), Year of construction: 2011, Total hours: 38,001 h. Cjbujwduklo Uiyhogt

Condition: good (used), Year of construction: 2020, Vacuum system (cost 74,000 GBP) – UNUSED ON PALLET, PD HO250S6 1K1 EASD A30 BFO VO 00A00001 (ATEX) Cjbuov Rwz Is Uiyhjgt

Condition: good (used), Year of construction: 2014, Serial No. 143703, digital display, Heidenhain, table, 600 x 200, X/Y/Z travel, 300 x 350 x 200 mm, max. speed 2,200 rpm, machine lighting, steel cabinet with 2 doors, tool carrier system, 3 levels, contents: lot of SK30 tool holders, tool changers Cgsbu Uiowazpmoyhst +++ Attention: Machine is part of an online auction! +++

Year of construction: 2016, Condition: not inspected (used), OPTYX sorter that detects and removes the widest range of foreign bodies and defects in the production process of food products such as poultry, vegetables, fruit, French fries, chips. The sorter uses combined camera and laser technology and can operate at temperatures from 4 to 49 degrees C. Cebu Uon R Nbvsiyhogt

Condition: good (used), Year of construction: 2018, Functionality: unexamined, machine/vehicle number: 25001, "- Number of threading stations: 1 to 3 - Chuck usage during the cycle: 2 - Type of tip/reference tip usage mode used during the cycle: 3 - Type of locating tip used: 4 - Position of the locating tip when clamping the workpiece: 5 to 80 mm - Transfer speed between loading and threading stations: 1 to 1000 m/s - Transfer position for loading and unloading: 0 to 795 mm - Transfer position for thread station 1 and/or 2 and/or 3: 0 to 795 mm - Free text for operator support: 9 - Thread type (Syncroll, incremental): 10 - Raw diameter before thread cutting: 1 to 200 mm Csbu Uieu R N Hyjyhsgt - Base diameter before thread cutting: 1 to 200 mm - Tooth offset of the workpiece: -5 to +5 mm - Number of workpiece teeth: 1 to 200 - Difference in center distance between workpiece and discharge: 0 to 100 mm - Maximum permissible force (machine failure if exceeded): 0 to 330 kN - Start position adjustment for knurl before thread cutting: 0 to 359.999° - Knurling speed and direction: 0 to 45 rpm - Force tolerance for faulty workpiece (machine failure at the end of the cycle): 0 to 330 kN - Torque tolerance for faulty workpiece (machine failure at end of cycle): 0 to 150 % - Marking diameter for workpiece (Syncroll tapping): 1 to 200 mm - Rotation speed for marking (Syncroll thread cutting): 0 to 45 rpm - Feed speed of the carriage for marking (Syncroll thread cutting): 0.01 to 5 mm/s - Penetration time for marking (Syncroll thread cutting): 0 to 10 s - Penetration speed (Syncroll thread cutting): 0.01 to 5 mm/s - Planing time (Syncroll thread cutting): 0 to 10 s - Return stroke of the slide for metal relief (Syncroll thread cutting): 0 to 5 mm - Return stroke speed of the slide for relief (Syncroll thread cutting): 0.01 to 5 mm/s - Knurled position at the end of the thread (Syncroll tapping): 0 to 359.999° - Knurling position at thread completion (incremental tapping): 0 to 359.999° - Knurling position at the end of the slide feed (incremental thread cutting): 0 to 359.999° - Knurling speed when approaching the workpiece (incremental thread cutting): 0 to 45 rpm Full supporting documentation (electronic format), including: Operating instructions drawings Certificate of conformity Consumables lists Backup files etc. Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Nissan Asset Ref: AF206614 - Acquisition cost €500k+ - Condition: Professionally dismantled, tagged, packed and stored in Liverpool, UK"

Condition: good (used), Year of construction: 1996, Serial No. 489, Operating Hours 38,433, Control, TRAUB, Type TX8F, 7 axes, main spindle, counter spindle, 2 turrets, 2 C-axis, 1 Y-axis, TRAUB/Stamag bar feeder, Type DN61, coolant system, parts removal, chip conveyor, air filter, accessories - feeder coupling defective Cgsbu Uiswazlbsyhot +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2012, Functionality: unexamined, machine/vehicle number: 25001, "General specifications: - Maximum grinding length: 150 mm - Axle height on the bench: 251 mm - Center height from the floor: 1190 mm - Maximum outer diameter of the workpiece: 360 mm - Maximum grindable workpiece length: 200 mm - Maximum loadable weight (at 100 mm): 150 daN - Total installable power: 55 kW - Machine weight: 7000 kg X-axis: - Maximum travel: 330 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Transducer: Linear decoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Z-axis: - Maximum travel: 590 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Converter: Linear encoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Internal electric motor spindle: - Maximum revolutions: 36000 rpm (S6) - Grinding wheel motor power: 22 kW (S6) - Model: FISCHER MFM-1418/36/1HJDN16 - Maximum theoretical peripheral speed of the wheel: 50 m/s Workpiece headstock: - Spindle taper: Morse taper 5 / Asa 8 - Bar capacity: 38 mm - Speed range: 10 - 800 rpm - Torque: 58 Nm - Motor: 20 Nm / 3000 rpm Internal grinding wheel: - Diameter: 138 mm - Thickness: 49 mm - Maximum permissible speed: 6000 rpm Additional information: - Available immediately - All UK duties paid Cgobueu Egags Uiyhst - Sale loaded on low loader - Shipping quotes available on request - Full supporting documentation (electronic format) including: Owner's manuals, drawings, certificate of conformity, consumables lists, back up files etc. - Nissan Asset Ref: AF201526 - Acquisition cost €345k+ - Professionally dismantled, marked, packed and stored in Liverpool, UK"

Condition: good (used), Year of construction: 2018, Serial No. ZH256, Control, Manufacturer: FANUC, Type: Series 31i-MODEL B5, 4 axes (X/Y/Z/A), X/Y/Z travel: 700 x 400 x 330 mm, NC dividing head, 21-station tool turret, BT 30 tool holder, max. speed: 24,000 rpm, coolant system, chip conveyor, air filter, 2-door tool cabinet, machine accessories, tool holder (with changer), Renishaw OMP 40-2 infrared probe Cebjwazglsu Uiyhjgt +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2013, Serial No. YH478, Control, Manufacturer: FANUC, Type Series 31i-MODEL B5, 4 axes (X/Y/Z/A), Travel X/Y/Z 700 x 400 x 330 mm, NC dividing head, 21-station tool turret, BT 30 tool holder, max. speed 10,000 rpm, chip conveyor, coolant system, central lubrication, cabinet, status lamp, Operating hours approx. 20,470 Cobu Uowazcaeiyhsgt +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2004, Serial No. 7041117, TX8i control system, 7 axes, 2x 10-station tool turrets, 2x C-axis, 1x Y-axis, driven tool stations, bar loading magazine, make FMB, type Turbo 10-72XT / 3,200 mm, max. bar diameter 72 mm, max. bar length 3,200 mm, chip conveyor, make KNOLL, type 240 S-1/50, coolant system - subject to prior sale - Cgobueway S He Uiyhot +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2008, Serial No. 1000(043), FANUC control, type Series 18i-TB, 7 axes, max. bar diameter 16 mm, max. turning length 205 mm, max. speed 6,000 rpm, main spindle (X/Z/Y/C), counter spindle (X/Z/C), 3 driven tool stations, small parts removal device, bar loading magazine, FMB, type minimag 18, coolant, oil Cgsbu Uieway Rvjyhot +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2004, Serial No. 4990, control system, Tornos-Bechler FANUC, type PNC Deco, 5 axes, speed 7000 rpm, main spindle, counter spindle, driven tool 2, bar feeder, Tornos-Bechler, type 4990, year of manufacture 2003, wooden accessory cabinets, each with 2 doors, W 1,000 mm, H 1,800 mm, D 400 mm, contents: turning tools, driven tools, lathe accessories, loading magazine/power supply amplifier (Fanuc) defective Cgobueway N Es Uiyhjt +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2006, Serial No. ST20G0030, control, manufacturer FANUC, type Series 31i-MODEL A, 6 axes, turning diameter max. 20 mm, turning length max. 200 mm, 5 driven tool stations, bar loading magazine, manufacturer FMB, type Turbo 3-26, bar length max. 3,200 mm, small parts dispensing device, chip conveyor, manufacturer FMB type ST20G, cooling lubricant system Cgobu Uisway Izsyhst

Condition: good (used), Year of construction: 2006, Serial No. 0254(045), Fanuc control, Series 18i-TB, 7 axes, bar diameter 32 mm, headstock stroke 310 mm, main spindle with 4 axes X/Z/Y/C, counter spindle with 3 axes X/Z/C, bar feeder, FMB, type Turbo 3-36, max. bar length 3,600 mm, chip conveyor, Mayfran, oil coolant system - counter spindle guide requires overhaul +++ Attention: Machine is part of an online auction! +++ Cgjbujway Ibj Uiyhot

Condition: good (used), Year of construction: 2011, Serial No. 0984(082), Fanuc Series 30ia control system, 7 axes, turning diameter 20 mm, headstock stroke 205 mm, speed 6,000 rpm, main spindle, 4 axes X/Y/Z/C, counter spindle, 3 axes Z/X/C, 18 tool stations, including 5 driven tool stations, LNS Hydrobar Express 220 bar feeder, oil coolant system +++ Attention: Machine is part of an online auction! +++ Coboway Hdju Uiyhogt

Condition: good (used), Year of construction: 2012, Serial No. 2465 (110), FANUC control, type Series 31i-MODEL B, 7 axes, turning diameter 20 mm, headstock stroke 205 mm, speed 6000 rpm, main spindle, 4 axes X/Y/Z/C, counter spindle, 3 axes Z/X/C, 21 tool stations, including 5 driven tool stations, bar magazine, make FMB, type Turbo 2-20, small parts dispensing system, chip conveyor, make LNS, type Turbo HB +++ Attention: Machine is part of an online auction! +++ Cgsbu Uiyeway Dpjhjt

Condition: good (used), Year of construction: 2000, Serial No. 0624(061), control system, FANUC, type Series 18i-T, 7 axes, turning diameter 20 mm, headstock stroke 205 mm, speed 6,000 rpm, main spindle, 4 axes (X/Z/Y/C), counter spindle, 3 axes (X/Z/C), 14 tool stations, including 5 driven tool stations, small parts removal device, bar loading magazine, FMB, type Turbo 3-26, operator terminal, bar length 3,200 mm, oil cooling lubricant system Cgobu Uiyjwayz Ishet +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2005, Serial No. 0926(089), control system, FANUC, type Series 18i-TB, 7 axes, turning diameter 20 mm, headstock stroke 205 mm, speed 6,000 rpm, main spindle, 4 axes (X/Z/Y/C), counter spindle, 3 axes (X/Z/C), 18 tool stations, including 5 driven tool stations, small parts removal device, bar loading magazine, FMB, type Turbo 3-26, operator terminal, bar length 3,200 mm, oil cooling lubricant system +++ Attention: Machine is part of an online auction! +++ Cjbu Uiyjwayu Uohegt

Condition: good (used), Year of construction: 2014, Serial No. 2518(175), control system, FANUC, type Series 32i-MODEL B, max. turning diameter 10 mm, max. turning length 105 mm, max. speed 10,000 rpm, main spindle, 4 axes X/Y/Z/C, counter spindle, 2 axes X/Z, 6 tool stations for side machining, 4 tool stations for face machining, 4 tool stations for back machining, driven tool 5, small parts removal device, bar loading magazine, FMB, type minimag 20, max. bar length 3,200 mm +++ Attention: Machine is part of an online auction! +++ Csbujwaytwo Uiyhegt

Condition: good (used), Year of construction: 2008, Serial No. 0757(050), control system, manufacturer: FANUC, type: Series 18i-TB, max. turning diameter 10 mm, max. turning length 105 mm, max. speed 10,000 rpm, main spindle, 4 axes X/Y/Z/C, counter spindle, 2 axes X/Z, 6 tool stations for side machining, 4 tool stations for face machining, 4 tool stations for back machining, driven tool 5, small parts removal device, bar loading magazine, manufacturer: FMB, type: minimag 18, max. bar length 3,200 mm Cebjwayq Aou Uiyhsgt +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2007, Serial No. 3021, FANUC control system, Series 18i-TB, 5 axes, max. bar diameter 16 mm, max. turning length 205 mm, max. speed 6,000 rpm, main spindle, counter spindle, 8 tool stations for side machining, 2 x 4 tool stations for rear and front machining, 3 driven tool stations, small parts output conveyor, FMB bar loading magazine, minimag 18, bar length 3,200 mm, oil cooling lubricant system +++ Attention: Machine is part of an online auction! +++ Cobjwayn Uou Uiyhogt