Second-hand machinery for sale (2,400)

Condition: good (used), Year of construction: 2006, Serial No. ST20G0030, control, manufacturer FANUC, type Series 31i-MODEL A, 6 axes, turning diameter max. 20 mm, turning length max. 200 mm, 5 driven tool stations, bar loading magazine, manufacturer FMB, type Turbo 3-26, bar length max. 3,200 mm, small parts dispensing device, chip conveyor, manufacturer FMB type ST20G, cooling lubricant system Dkobvsway Izsn Tbksl

Condition: good (used), Year of construction: 2018, Functionality: unexamined, machine/vehicle number: 25001, "- Number of threading stations: 1 to 3 - Chuck usage during the cycle: 2 - Type of tip/reference tip usage mode used during the cycle: 3 - Type of locating tip used: 4 - Position of the locating tip when clamping the workpiece: 5 to 80 mm - Transfer speed between loading and threading stations: 1 to 1000 m/s - Transfer position for loading and unloading: 0 to 795 mm - Transfer position for thread station 1 and/or 2 and/or 3: 0 to 795 mm - Free text for operator support: 9 - Thread type (Syncroll, incremental): 10 - Raw diameter before thread cutting: 1 to 200 mm - Base diameter before thread cutting: 1 to 200 mm - Tooth offset of the workpiece: -5 to +5 mm - Number of workpiece teeth: 1 to 200 - Difference in center distance between workpiece and discharge: 0 to 100 mm - Maximum permissible force (machine failure if exceeded): 0 to 330 kN - Start position adjustment for knurl before thread cutting: 0 to 359.999° - Knurling speed and direction: 0 to 45 rpm - Force tolerance for faulty workpiece (machine failure at the end of the cycle): 0 to 330 kN - Torque tolerance for faulty workpiece (machine failure at end of cycle): 0 to 150 % - Marking diameter for workpiece (Syncroll tapping): 1 to 200 mm - Rotation speed for marking (Syncroll thread cutting): 0 to 45 rpm - Feed speed of the carriage for marking (Syncroll thread cutting): 0.01 to 5 mm/s - Penetration time for marking (Syncroll thread cutting): 0 to 10 s - Penetration speed (Syncroll thread cutting): 0.01 to 5 mm/s - Planing time (Syncroll thread cutting): 0 to 10 s - Return stroke of the slide for metal relief (Syncroll thread cutting): 0 to 5 mm - Return stroke speed of the slide for relief (Syncroll thread cutting): 0.01 to 5 mm/s - Knurled position at the end of the thread (Syncroll tapping): 0 to 359.999° - Knurling position at thread completion (incremental tapping): 0 to 359.999° - Knurling position at the end of the slide feed (incremental thread cutting): 0 to 359.999° - Knurling speed when approaching the workpiece (incremental thread cutting): 0 to 45 rpm Full supporting documentation (electronic format), including: Operating instructions drawings Certificate of conformity Consumables lists Backup files etc. Dkjbvnou R N Hye Tbkol Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Nissan Asset Ref: AF206614 - Acquisition cost €500k+ - Condition: Professionally dismantled, tagged, packed and stored in Liverpool, UK"

Condition: good (used), Functionality: fully functional, 30-foot flat rack container platform, equipped with 4 container locks and various lashing points, length 30 feet (approx. 9.12 meters), weight approx. 4,000 kg Dobvjv Hakqon Tbkjkl

Year of construction: 2019, Condition: like new (used), overall weight: 947 kg, working width: 320 mm, input voltage: 400 V, roll diameter: 330 mm, machine/vehicle number: A7X5023000109, - Printing width: 320 mm - Roll width: 330 mm - Resolution: 1200x1200 dpi x 8bit 1200x3600 dpi On 07.09.2022 - after disassembly and transport to the warehouse, it was checked by the service department, which found no deficiencies, or damage. The whole set consists of an unwinder, printer and rewinder, which allows you to print most self-adhesive media. - Media feeding speed: 19m/min, 13.5m/min, 9.45m/min. - Speed depends on the type of paper Dkebvjp S N Snjn Tbkol - Dimensions: 3869x1480x1138 mm - Weight: 947 kg - Power supply: 400 V/50 Hz

Condition: used, Year of construction: 2018, EOS M100 DMLS Additive Manufacturing Machine (2018) Dksbewa S Igevn Tbkol Laser thickness : 15 30 ?m Production speed : 1 9 cm3/h (depending on material) Laser system : Fibre laser 200 W (cw) Max scan speed : 7 m/s Focus diameter : approx 75 ?m Connected loads : power consumption max. 1.5 kW Power supply 1/N/PE AC 230 V, 16 A Inert gas supply : 1 gas connection provided / Nitrogen or Argon Inert gas consumption : approx. 0.6 0.8 l/min Machine dimensions : 820 x 1839 x 1410 mm (W x H x D) Handling station dimensions : 729 x 1392 x 628 mm (W x H x D) Machine weight : 700 kg approx. Handling station weight : 100 kg Operating conditions : 15 30C Materials available : Stainless Steel 316L , Stainless Steel 17-4PH, Maraging Steel M300, Aluminum AlSi10Mg, Nickel 718, Titanium Ti6Al4V ELI Grade 23, Titanium CPTi Grade 2, Bronze CuSn, remanium star CL (CoCrW), rematitan CL (Ti6Al4V ELI)

Condition: good (used), Year of construction: 2011, Total hours: 38,001 h. Djbvswduklsn Tbkokl

Condition: good (used), Year of construction: 2006, Serial No. 0254(045), Fanuc control, Series 18i-TB, 7 axes, bar diameter 32 mm, headstock stroke 310 mm, main spindle with 4 axes X/Z/Y/C, counter spindle with 3 axes X/Z/C, bar feeder, FMB, type Turbo 3-36, max. bar length 3,600 mm, chip conveyor, Mayfran, oil coolant system - counter spindle guide requires overhaul Dobvn Tjway Ibebkjkl +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2012, Functionality: unexamined, machine/vehicle number: 25001, "General specifications: - Maximum grinding length: 150 mm - Axle height on the bench: 251 mm - Center height from the floor: 1190 mm - Maximum outer diameter of the workpiece: 360 mm - Maximum grindable workpiece length: 200 mm - Maximum loadable weight (at 100 mm): 150 daN - Total installable power: 55 kW - Machine weight: 7000 kg X-axis: - Maximum travel: 330 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Transducer: Linear decoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Z-axis: - Maximum travel: 590 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Converter: Linear encoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Internal electric motor spindle: - Maximum revolutions: 36000 rpm (S6) - Grinding wheel motor power: 22 kW (S6) - Model: FISCHER MFM-1418/36/1HJDN16 - Maximum theoretical peripheral speed of the wheel: 50 m/s Workpiece headstock: - Spindle taper: Morse taper 5 / Asa 8 - Bar capacity: 38 mm - Speed range: 10 - 800 rpm - Torque: 58 Nm - Motor: 20 Nm / 3000 rpm Internal grinding wheel: - Diameter: 138 mm - Thickness: 49 mm - Maximum permissible speed: 6000 rpm Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request Djbvnou Egago Tbkekl - Full supporting documentation (electronic format) including: Owner's manuals, drawings, certificate of conformity, consumables lists, back up files etc. - Nissan Asset Ref: AF201526 - Acquisition cost €345k+ - Professionally dismantled, marked, packed and stored in Liverpool, UK"

Year of construction: 2016, Condition: not inspected (used), OPTYX sorter that detects and removes the widest range of foreign bodies and defects in the production process of food products such as poultry, vegetables, fruit, French fries, chips. The sorter uses combined camera and laser technology and can operate at temperatures from 4 to 49 degrees C. Dkobvn Ten R Nbvjbkjl

Condition: used, Year of construction: 2014, EOS M290 DMLS Additive Manufacturing Machine (2014) Build Volume : 250 x 250 x 325 mm (9.8 x 9.8 x 12.8 in) Laser Type : Yb-fiber laser; 1 x 400 W Presicion Optics : 1 F-theta-lens(es); 1 High-speed scanner(s) Dsbvowa S D Ien Tbkskl Scan Speed : up to 7.0 m/s (23.0 ft/s) Focus Diameter approx. 100 m (0.00394 in) Power Supply : 1 x 32 A Power Consumption : max. 8.5 kW / typical 2.4 kW Compressed Air Supply : 7 Bar; 20 m/h (102 psi; 706 ft/h) Machine Dimensions : 2500 x 1300 x 2190 mm (98.4 x 51.2 x 86.2 in) Recommended Installation Space : min. 4800 x 3600 x 2900 mm (189.0 x 141.7 x 114.2 in) Weight approx. 1250 kg (2756 lbs)

Condition: good (used), Functionality: fully functional, Overall height: 245 cm, load capacity: 3,500 kg, fork length approx. 160 cm, dead weight: 4,415 kg, operating hours: 4,845 h, lifting height: 5,530 mm. Electrically adjustable forks, triplex mast, sideshift, Dkjbvn Tbewdukfeksl

Condition: good (used), Year of construction: 2011, Serial No. 0984(082), Fanuc Series 30ia control system, 7 axes, turning diameter 20 mm, headstock stroke 205 mm, speed 6,000 rpm, main spindle, 4 axes X/Y/Z/C, counter spindle, 3 axes Z/X/C, 18 tool stations, including 5 driven tool stations, LNS Hydrobar Express 220 bar feeder, oil coolant system Debvn Tsway Hdsbkokl +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 2021, DMG DMU50 5 Axis CNC Machining Centre (2021) Dkebvnowa S Aqj Tbkol 5 axis Working area Travels X / Y / Z mm 650 / 520 / 475 Main drive Speed range rpm 20 15,000 Drive power (40 / 100 % DC) kW 21 / 16 Torque (40 / 100 % DC) Nm 111 / 85 Feed Rapid traverse X / Y / Z m/min 42 Maximum thrust force X / Y / Z kN 4.8 Swivelling rotary table Clamping area mm 630 500 B- / C-axis speed rpm 30* Maximum load kg 300 Swivel range Degrees 35 / +110 Tool magazine with double gripper Storage positions Number 30 / 60 / 120 Maximum tool length mm 300 Maximum tool diameter mm 80 / 130 Tool weight max. kg 8 60 ATC. HSK63. Machine weight / connected values Weight kg 7,480 Operating Hours: 18236,5 hours

Year of construction: 2011, Condition: good (used), Roller belt left: 400 cm, roller belt right: 600 cm. Dkjbvowdui Ien Tbkel

Condition: good (used), Year of construction: 2012, Serial No. 2465 (110), FANUC control, type Series 31i-MODEL B, 7 axes, turning diameter 20 mm, headstock stroke 205 mm, speed 6000 rpm, main spindle, 4 axes X/Y/Z/C, counter spindle, 3 axes Z/X/C, 21 tool stations, including 5 driven tool stations, bar magazine, make FMB, type Turbo 2-20, small parts dispensing system, chip conveyor, make LNS, type Turbo HB Djbvneway Dpo Tbkekl +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 2020, EOS M300-4 DMLS Additive Manufacturing Machine (2020) Build volume : 300 x 300 x 435* mm (11.8 x 11.8 x 17.1 in) Laser type : Yb-fiber laser; 4 x 400 W Precision optics : 4 F-theta-lens(es); 4 High-speed scanner(s) Scan speed: up to 7.0 m/s (23.0 ft/s) Focus diameter: approx. 100 m (0.00394 in) Power supply : 3 x 63 A Power consumption : max. 19.6 kW / typical 16.0 kW Compressed air supply: 7 Bar; 15 m/h (102 psi; 530 ft/h) Flexible dispenser Serial number : P.13.1B.0033 Year : 2019 Transfer station Dkebvnjwa Swzs Tbkel Serial number : P.11.1B0026 Year : 2019 Hydac cooling system Type : RFCS-G3-04500-W-L-R25-7-IW-UL Serial number : 4052929 EOS Sieving unit Model : CM M Pro Crown pedestrian truck Model : EOS Sirius Serial number : EOS 1603 Year : 2020 Capacity 600kgs

Condition: good (used), Year of construction: 2007, 400 V, 26 kW, dead weight: 6,150 kg. Control system: Siemens Sinumerik, laser (make: Rofin, type: DC 020, control: Rofin). Chip/material conveyor (make: FB Automazione, serial number: 322-06-12, year of manufacture: 2007), filter system (make: Sideros, type: FL045L00A1, year of manufacture: 2006), hydraulic cooling system. Pipe storage: approx. 660 cm. Dksbvjwduizjn Tbkel

Condition: good (used), Year of construction: 2000, Serial No. 0624(061), control system, FANUC, type Series 18i-T, 7 axes, turning diameter 20 mm, headstock stroke 205 mm, speed 6,000 rpm, main spindle, 4 axes (X/Z/Y/C), counter spindle, 3 axes (X/Z/C), 14 tool stations, including 5 driven tool stations, small parts removal device, bar loading magazine, FMB, type Turbo 3-26, operator terminal, bar length 3,200 mm, oil cooling lubricant system +++ Attention: Machine is part of an online auction! +++ Dkjbvn Tswayz Iebksl

Condition: used, Year of construction: 2017, Alzmetall GS800/5 5 Axis CNC Machining Centre (2017) Dksbvn Tewa Sy Asbksl 5 axis X-Axis 660 mm Y-Axis 800 mm Z-Axis 550 mm Interference circle diameter 800 mm Distance Spindle up to 650 mm Machine-Table Load 500 kgs Maximum rapid travel X/Y/Z at TCP max. 75 m/min Cutting-Tool Interface HSK-A63 Motor-Spindle-Power at CDF 25% max. 16 kW Variable Speed Range max. 10.000 mm-1 Motor-Spindle Torque at CDF 25% max. 102 Nm Heidenham touch screen control Wiring diagram : 2865-95-653991 Machine weight 13,000 kgs Resy filtration system Swarf conveyor Erowa pallet changer model RobotEasy Serial number ERE.3048 Year 2017 Weight 1300kgs

Condition: good (used), Year of construction: 1997, Dead weight: 8,000 kg, pressure: 125 t, bending length: 3,050 mm, stroke approx. 335 mm, CNC control DELEM, Debvnjwduius Tbkokl

Condition: good (used), Year of construction: 2005, Serial No. 0926(089), control system, FANUC, type Series 18i-TB, 7 axes, turning diameter 20 mm, headstock stroke 205 mm, speed 6,000 rpm, main spindle, 4 axes (X/Z/Y/C), counter spindle, 3 axes (X/Z/C), 18 tool stations, including 5 driven tool stations, small parts removal device, bar loading magazine, FMB, type Turbo 3-26, operator terminal, bar length 3,200 mm, oil cooling lubricant system Dkobvn Towayu Uebkol +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 2018, Alzmetall GS600/5-T 5 Axis CNC Machining Centre (2018) X-Axis 460 mm Y-Axis 600 mm Z-Axis 400 mm Interference circle diameter 640 mm Distance Spindle Up to 550 mm Machine-Table Load 500 kg Maximum rapid travel X/Y/Z at TCP max. 75 m/min Cutting-Tool Interface HSK-A63 Dobswa Sycjvn Tbkjkl Motor-Spindle-Power at CDF 25% max. 26 kW Motor-Spindle Torque at CDF 25% max. 116 Nm Wiring diagram : H5774-95-2845 Machine weight 7000 kgs Resy filtration system Model: KBF - 452/500 Serial number 18-P02571 Swarf conveyor and Tolley Erowa pallet changer Model :RobotEasy Serial number : ERE 4045 Year 2018 Table size 31.5 inches (800 mm) Tool changer capacity 32 tools

Condition: good (used), Year of construction: 2014, Serial No. 2518(175), control system, FANUC, type Series 32i-MODEL B, max. turning diameter 10 mm, max. turning length 105 mm, max. speed 10,000 rpm, main spindle, 4 axes X/Y/Z/C, counter spindle, 2 axes X/Z, 6 tool stations for side machining, 4 tool stations for face machining, 4 tool stations for back machining, driven tool 5, small parts removal device, bar loading magazine, FMB, type minimag 20, max. bar length 3,200 mm +++ Attention: Machine is part of an online auction! +++ Dksbvn Tswaytwsbkel

Condition: good (used), Year of construction: 2008, Serial No. 0757(050), control system, manufacturer: FANUC, type: Series 18i-TB, max. turning diameter 10 mm, max. turning length 105 mm, max. speed 10,000 rpm, main spindle, 4 axes X/Y/Z/C, counter spindle, 2 axes X/Z, 6 tool stations for side machining, 4 tool stations for face machining, 4 tool stations for back machining, driven tool 5, small parts removal device, bar loading magazine, manufacturer: FMB, type: minimag 18, max. bar length 3,200 mm Dsbvn Tewayq Asbkokl +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2007, Serial No. 3021, FANUC control system, Series 18i-TB, 5 axes, max. bar diameter 16 mm, max. turning length 205 mm, max. speed 6,000 rpm, main spindle, counter spindle, 8 tool stations for side machining, 2 x 4 tool stations for rear and front machining, 3 driven tool stations, small parts output conveyor, FMB bar loading magazine, minimag 18, bar length 3,200 mm, oil cooling lubricant system +++ Attention: Machine is part of an online auction! +++ Dobvnjwayn Uj Tbkskl