Second-hand machinery for sale (2,474)

Condition: used, Year of construction: 2016, 80 nominal tons, high efficiency (refrigerant R-134a, global warming potential GWP 1430). Equipped with 2 UPS systems, buffer tank and heat exchanger mounted on a skid, as well as 2 ventilated cooling towers each with 6 fans. Hsdpfx Afsx E S Nzotefr

Condition: used, Year of construction: 2012, Mori Seiki NTX2000/1500SZ 5-Axis Mill/Turn with MAPPS/F31iB5 Control, Max Workpiece Swing Diameter 660mm, Max Swing Over Cross Slide 660mm, Max Turning Diameter 610mm, Max Turning Length 1540mm, Bar Work Capacity 65mm, Travel X/Y/Z/X2/Z2 = 495/250/1560/160/1402mm, Main Spindle Kitagawa 8”dia Chuck at 5,000rpm, Sub-Spindle Kitagawa 8”dia Chuck at 5000rpm, 76 Position ATC, Spindle Taper Capto C6 at 12,000rpm, High-Pressure Coolant, 10 Station Indexing Turret, Swarf Conveyor, Machine Weight 15,000kgs, Floor Space (LxWxH) 4076 x 2890 x 2626mm (2012) Hodpfx Afjx Hxk Uetofr Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 93,500 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: Fanuc Series 16i MB, workpiece diameter (max.): 32 mm, Approximately €30,000 has been invested since 2017. TECHNICAL DETAILS Travel X: 250 mm Travel Y: 200 mm Travel Z: 300 mm Max. workpiece diameter: 32 mm Spindle speed: 30,000 rpm Spindle taper: HSK-E40 Hodpfxox E U Exe Aftofr Tool changer: 48 positions MACHINE DETAILS Number of axes: 5 Control: Fanuc Series 16i MB Operating hours: 93,500 h EQUIPMENT - Bar feeder LNS Hydrobar Express 332 - Coolant filtration system - Spindle cooling - Through spindle coolant (IKZ) - Without tool holders and collet chucks

Condition: used, mileage: 11,958 km, power: 240 kW (326.31 HP), first registration: 05/2012, fuel type: diesel, axle configuration: 6x6, color: other, Year of construction: 2012, Equipment: additional headlights, air conditioning, all wheel drive, differential lock, parking heater, This Mercedes-Benz Zetros 2733 A 6×6 will be auctioned online in our vehicle auction on January 16th. Technical details of the vehicle: First registration: 09.05.2012 Chassis number: WDB9490661V220335 Mileage: 11,958 km Drive: 6×6 permanent Condition: Very good, low mileage Note: the exhaust may need to be relocated back to its original position Mercedes-Benz Zetros 2733 A 6×6 – an extremely off-road capable and rugged heavy-duty payload carrier. The vehicle was factory-designed for demanding off-road applications and was subsequently fitted by EMPL with a professional container frame including a fully hydraulic leveling system. According to TÜV, the Zetros is both technically and visually in very good condition and shows exceptionally low mileage of under 12,000 km. • Engine: 6-cylinder diesel, 7,200 cm³ • Power: 240 kW • Length: 7,390 mm • Width: 2,500 mm • Height: 3,100 mm • Gross vehicle weight: 26,000 kg • Axle loads: 1st axle: 7,500 kg 2nd axle: 9,500 kg 3rd axle: 9,500 kg • Tyres: 395/85 R20 (new tyres in 2016) Modifications & special equipment (EMPL) • Container frame suitable for ISO 20-ft containers • Hydraulic leveling system (four individually adjustable supports) Hfedpfx Aex E Ukzjfter • Control box & emergency control panel • Storage boxes, tool compartments, brackets • Twist-lock container securing • Spare wheel carrier • Protective grilles and reinforced chassis modifications • Full respray in military sand color Equipment (ex-works & special options) • Three differential locks (front axle, rear axle group, longitudinal lock) • Transfer case VG1700 • ABS • NATO jump-start socket • Ringfeder trailer coupling • Webasto Thermo 90 / Air Top 2000 auxiliary heating • ISRI driver’s seat with comfort suspension • Air conditioning • Additional lighting and work lights • 24-volt electrical system, auxiliary tanks Condition & history • Extremely low mileage, practically test operation only • MOT, SP and emissions inspections always passed without faults • Braking system with outstanding measured values • Clean and well-kept interior • No known damages or structural impairments Special advantages of this vehicle • Extremely low mileage • Military heavy-duty platform • 6×6 drive with three differential locks • Professional EMPL custom superstructure • Complete inspection and maintenance history • Ideal for special-body solutions, crisis relief, logistics, or expeditions As shown Function not tested Subject to prior sale

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 19631, grinding length: 1,500 mm, grinding width: 900 mm, grinding spindle speed: 1,000 rpm, controller manufacturer: Siemens, workpiece height (max.): 690 mm, The machine was completely overhauled and modernized in 2009 & 2023. In 2023, the X-axis, including the drive, was refurbished and new magnetic plates were installed! TECHNICAL DETAILS Grinding width: 900 mm Grinding length: 1,500 mm Grinding area: 1,500 x 900 mm Workpiece height: 690 mm Table size: 1,800 x 900 mm Longitudinal table speed: 4 - 36 m/min Cross table speed: 1 - 60 m/min Grinding wheel dimensions: 500 x 100 x 203 mm Hjdjx Dcfbepfx Aftefr Grinding spindle speed: 1,000 rpm MACHINE DETAILS Control system: Siemens Electrical Data Voltage: 400 V Total drive power: 80 kW Grinding spindle drive: 28 kW Machine weight: approx. 17 t EQUIPMENT Coolant system Dressing device Automatic vertical feed

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 17496, Year of construction: 2017, operating hours: 11,962 h, load capacity: 3,500 kg, lifting height: 5,450 mm, free lift: 1,870 mm, mast type: triplex, fork width: 1,240 mm, TECHNICAL DETAILS Hedpfsx Ahw Tex Aftefr Lift height: 5,450 mm Free lift: 1,870 mm Fork length: 1,160 mm Fork width: 1,240 mm Maximum fork width: 1,240 mm Minimum fork width: 440 mm Lifting capacity: 3,500 kg MACHINE DETAILS Mast type: Triplex Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,600 x 2,720 mm Weight: 6,900 kg Fuel type: electric Year of battery: 2016 Battery capacity: 775 Ah Battery voltage: 80 V Travel direction: 4-way EQUIPMENT Attachment: Fork spreader Documentation CE marking Tested until: 12.2025

Condition: used, Year of construction: 2013, Stainless steel 316, double-walled: 98 L, 3.5 bar, 150 °C // Reactor: 3500 L, 1 bar, 95 °C // With three-blade agitator on three levels (total 9 blades), 3.6 kW, 250–1435 rpm – please request the drawings! Supplied with a pump. Hfjdpsx E S I Dofx After

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,592 h, functionality: fully functional, TECHNICAL DETAILS Grinding length: 1,200 mm Grinding width: 450 mm Max. grinding wheel size: 400 x 60 x 127 mm Distance from grinding wheel to magnet max.: approx. 400 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,300 x 2,400 mm Weight: 5,800 kg Operating Hours Spindle rotation hours: 5,592 h Hjdpfx Afox E U A Djtofr Total operating hours: 44,885 h EQUIPMENT Magnetic clamping plate 1,200 x 500 mm Borazon grinding wheel (mounted)

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,000 h, functionality: fully functional, travel distance X-axis: 1,850 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,525 mm, controller model: Fanuc 16 i- M , rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel path X: 1,850 mm Travel path Y: 1,250 mm Travel path Z: 1,525 mm Pallet changer type: double (2-station) Pallet size: 1,250 x 1,000 mm Hfjdpfx Afsx Dcb Nstsr Tool changer: 80-station Tool holder: ISO 50 Drive power: 30 kW Spindle speed: 20–6,000 rpm Maximum workpiece weight: 5,000 kg Rotary table: 360 x 1° Feed rates – automatic programming: 0–15,000 mm/min Rapid traverse: 30 m/min MACHINE DETAILS Control unit: Fanuc 16i-M Total power requirement: 60 kW Dimensions & Weight Required installation space: approx. 8.3 x 7.3 x 4 m Machine weight: approx. 27 t Operating Hours Total operating hours: 84,857 h Automatic mode hours: 31,451 h Spindle hours: 28,149 h EQUIPMENT Chip conveyor High-pressure cooling Internal coolant supply Approx. 300 SK 50 tool holders Renishaw measuring probe Filter belt system with internal cooling (IKZ) Extraction system

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516329J00102, Year of construction: 2018, operating hours: 11,771 h, load capacity: 5,000 kg, lifting height: 4,400 mm, free lift: 1,530 mm, mast type: triplex, fork width: 2,050 mm, TECHNICAL DETAILS Lifting capacity: 5,000 kg Lift height: 4,400 mm Free lift: 1,530 mm Fork length: 2,400 mm Maximum fork width: 2,050 mm Minimum fork width: 560 mm Overall height (under clearance): 2,320 mm Mast type: Triplex MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,400 x 2,320 mm Unladen weight: 7,616 kg Fuel type: Electric Battery capacity: 930 Ah Battery voltage: 80 V Number of wheels: 4 Operating hours: 11,771 h EQUIPMENT Fork positioner Side shift Heater Full cabin Hfedpsx Ahnfjfx After Free lift Work lights

Condition: used, Year of construction: 2013, Stainless steel 316, double-walled: 130 L, 3.5 bar, 150 °C // Reactor: 6,935 L, 1 bar, 95 °C // With 3-blade agitator on 3 or 4 levels (total 12 blades), 5.5 kW, 68 rpm – please request the drawings! Supplied with a pump and filling hopper (cobalt dosing system). Hfjdex E S H Hopfx After

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 352 mm, travel distance Z-axis: 250 mm, rotational speed (max.): 5,000 rpm, controller model: Fanuc Series 0i Mate-TD, Equipment: chip conveyor, TECHNICAL DETAILS Turning diameter over tool turret: 70 mm Travel X: 352 mm Travel Z: 250 mm Hsdpsx E Uzmjfx Aftefr Tool stations: 8 Bar capacity: 42 mm Max. spindle speed: 5,000 rpm MACHINE DETAILS Control: Fanuc Series 0i Mate-TD EQUIPMENT Power chuck D135 mm Collet chuck 173E Parts catcher Chip conveyor

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, turning diameter: 2,200 mm, faceplate diameter: 2,000 mm, travel distance X-axis: 1,700 mm, travel distance Y-axis: 400 mm, controller model: Siemens 840 D, No reserve price – guaranteed sale to the highest bidder! The machine underwent a full overhaul in 2015 and was retrofitted with a Siemens 840 D CNC control system! TECHNICAL DETAILS Faceplate diameter: 2,000 mm Turning diameter over table: 2,200 mm X-axis travel: 1,700 mm Z-axis travel: 400 (+550) mm Stepless faceplate speed range: 0.28–160 rpm Center height over table: 1,140 mm Main spindle diameter: 285 mm Hfodpfx Asx Db S Tefter Spindle bore: 100 mm Torque at faceplate: 25,000 Nm Max. workpiece weight: 5,000 kg MACHINE DETAILS Control: Siemens 840 D Total power requirement: 75 kW Dimensions & Weight Space required: approx. 6 x 3.5 x 3 m Machine weight: approx. 21 t

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 950 mm, overall weight: 7,000 kg, working height: 120 mm, control type: CNC control, Equipment: CE marking, TECHNICAL DETAILS Working width: 950 mm Working height: 0.5–120 mm MACHINE DETAILS Control system: CNC Motor power: 39.0 kW Dimensions & Weight Hsdpfex Ahm Iox Aftefr Dimensions (L x W x H): 3,940 mm × 1,980 mm × 2,010 mm Weight: 7,000 kg Transport packages: 4 EQUIPMENT CE marking

Condition: used, Year of construction: 2023, Weight: 1,120 kg. Flow rate: 7,200 m³/h. Operating hours: 11,000 h. Hfsdpfx Afjx E S Evjtjr

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 260 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 4,000 rpm, controller model: Fanuc 18i-TB, TECHNICAL DETAILS Swing diameter over bed: 560 mm Swing diameter over cross slide: 520 mm Spindle bore: 130 mm Spindle speed: 33 rpm – 4,000 rpm X-axis travel: 260 mm Z-axis travel: 600 mm Hjdpfx Aex Ahlwsftsfr MACHINE DETAILS Control: Fanuc 18i-TB Power: 22.0 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,300 x 2,900 mm Transport weight: 7,500 kg Transport packages: 4 EQUIPMENT C-axis Three-jaw chuck Facing lathe Chip conveyor Driven tools

Condition: used, Year of construction: 2022, Version 3.1 Commissioned 04/2022 Maximum dimensions 1005 x 1035 mm Hfjdsx E S Ecepfx Aftor Unladen weight 75 kg Power supply 46V DC Motor output 2 x 315 W

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 83261, controller model: HACO BC59T Graphics, bending force (max.): 250 t, working width: 4,300 mm, distance between stands: 3,800 mm, TECHNICAL DETAILS Pressing force: 250 t Max. working width: 4,300 mm Distance between uprights: 3,800 mm Backgauge depth: 1,000 mm Number of axes: 6 (Y1, Y2, X, R, Z1, Z2) Crowning system: CNC-controlled Punch holder: Quick-release MACHINE DETAILS Control unit: HACO BC59T Graphics Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,300 x 2,900 mm Weight: 18,700 kg Transport packages: 1 pc. Hfsdpex Ahktsfx Aftor EQUIPMENT Finger protection CE marking

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1473114, This filter and cooling unit was previously used for two Starrag Heckert machining centers (lot 2770011 and 12). Order number: 2153651 Control voltage: 24 V DC Connection voltage: 3×400 V + PE / 50 Hz Connected load: 6.30 kW Fuse: 50 A Country of manufacture: Germany Additional unit: Manufacturer: BKW GmbH, Wolfschlugen Model: WRK3C-2KK2P Year of manufacture: 2005 Refrigerant: R134a Permissible operating pressure: 24 bar Voltage: 400 V / 50 Hz Output: 5.02 kW Control voltage: 24 V DC Country of manufacture: Germany Hfedpfx Afjx Hinkstor

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 289.112, overall weight: 3,000 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: Beckhoff, sheet thickness (max.): 32 mm, TECHNICAL DETAILS Travel range X: 3,000 mm Travel range Y: 1,500 mm Max. sheet thickness: 32 mm Resonator type: Hypertherm Powermax 105 MACHINE DETAILS Control type: Beckhoff Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,400 x 2,200 mm Net weight: 3,000 kg Power: 16.8 kW Transport packages: 1 Hfodpfex Ahiiox Aftsr EQUIPMENT Various accessories Spare parts Documentation available CE marking

Condition: used, Year of construction: 2012, operating hours: 44,900 h, functionality: fully functional, machine/vehicle number: 16504, Equipment: chip conveyor, Pallet changer: Hfjdox Him Hjpfx Aftor -> included Spindle: -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 stations This machine used a single cooling unit together with another machine (lot 2770012). The cooling unit (lot 2770249) is offered separately. This machine does NOT include a cooling unit. The machine/plant does not include any product-related tools, fixtures, or grippers (robots). Spindle hours approx. 25,600 Operating hours approx. 44,900

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18421, total length: 5,370 mm, total height: 1,600 mm, total width: 1,020 mm, Equipment: CE marking, MACHINE DETAILS Dimensions (L x W x H): 5,370 mm x 1,020 mm x 1,600 mm (l x w x h) Hodpfx Asx Ahhfeftsfr Transport packages: 1 unit EQUIPMENT CE marking

Condition: used, Year of construction: 2011, operating hours: 50,500 h, functionality: fully functional, machine/vehicle number: 16520, Equipment: chip conveyor, Pallet changer: -> included Spindle: Hedsx Himtopfx Aftofr -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 stations This unit shared a single cooling unit with another device (lot 2770012). This unit does NOT include a cooling unit. The machine/system does not include product-specific tools/fixtures or grippers (robot).

Condition: used, Year of construction: 2013, operating hours: 45,500 h, functionality: fully functional, machine/vehicle number: 16546, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Pallet Changer: -> Included Spindle: -> Tool holder: HSK63 -> Speed: 20,000 rpm Linear Axes: -> X-axis: 750 mm -> Y-axis: 750 mm -> Z-axis: 725 mm Tool Changer: -> 60 positions This machine is equipped with a coolant filtration system with chiller. • Manufacturer: KNOLL Maschinenbau GmbH / HYFRA Industriekühlanlagen GmbH • Model: PF 210 (Knoll) + TRK30-EF-S (Hyfra Pedia) • Year of manufacture: 2012 • Serial numbers:  - KNOLL: 501973 / 201139433  - HYFRA: 12030089 • Electrical connection: 3×400 V / 50 Hz • Control voltage: 24 V DC • Power consumption: 11.1 kW (Knoll) + 4.8 kW (Hyfra) • Fuse protection: 16 / 25 A (Knoll), 16 A (Hyfra) Hsdpox Hilvsfx Aftofr • Cooling capacity (chiller): 3.8 kW at 42 °C • Refrigerant: R134a, 1.6 kg • Max. pressure: 20 bar • Weight (with coolant): 140 kg Note: Machine/asset does not include any product-related tools, fixtures, or robot grippers. Spindle hours: approx. 9,300 Operating hours: approx. 45,500

Condition: used, Lot comprising all items of spare parts and engines Hfodpfx Asx Ezapjftor