Second-hand machinery for sale (2,409)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,650 bar, ejector force: 61,000 N, Injection moulding machine, function-tested and immediately ready for operation by an Engel specialist technician! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 1,300 kN Screw diameter: 55 mm Shot volume: 510 cm³ Injection pressure: 1,650 bar Ejector force: 61,000 N Ejector stroke: 150 mm Platen length: 750 mm Platen width: 750 mm Opening stroke: 600 mm Screw length: 20 l/d Minimum mould installation height: 300 mm Maximum platen distance: 900 mm Daylight: 900 mm MACHINE DETAILS Control system: CC200 Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V Dimensions & Weight Machine dimensions (L x W x H): 5.8 m x 1.7 m x 2.3 m Total weight: 9,500 kg Operating hours: 24,896 h EQUIPMENT Documentation/manual Iedpfx Agjxzfkbozebf Display language: German CEE socket 16A Hydraulic core pull 1x Water manifold Levelling elements EUROMAP 67 interface Interface for ejector plate monitoring Schuko socket 10A Mould heating 8x Note: The machine is sold without material hopper and safety guarding.

Condition: used, Year of construction: 2007, Serial no. 107.51.00.013, Control unit: Heidenhain make, Type: ITNC530, 5 axes, rotary/swivel table, travel X/Y/Z 1,000 x 700 x 700 mm, electrospindle by Step Tec, max. speed 24,000 rpm, 5-position pallet station, pallet size 500 x 600 mm, 165-position tool changer, tool holder HSK 63, chip conveyor, belt filter, ICS (internal coolant supply), coolant temperature control, enclosure, BLUM laser measuring system, tool and accessory package, workbench, mobile, 6 drawers, single-door, WTS cart, orange, 2 table carts, contents: tool holders, clamping devices, FCS zero-point clamping system, 5 grid plates, HD vise. Ibodexug Alspfx Agzsf +++ Attention: Machine is part of an online auction! +++

Year of construction: 2018, condition: used, machine/vehicle number: 7.F1/105-16 38204, 1 refrigerated dryer Ibodpfxex Akhzo Agzsf

Condition: used, Trimos Horizon 1000 Premium High Precision Horizontal Measure & Setting Bench. S/No. 1087 Isdpfx Agox Ahipezebf Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, empty load weight: 1,500 kg, workpiece weight (max.): 750 kg, machine/vehicle number: F101, TECHNICAL DETAILS Pump output: 5.5 kW Heating element output: 4.2 kW Rotary basket load capacity: max. 750 kg Ibsdpfx Ajxztt Dsgzef Compressed air connection: max. 10 bar MACHINE DETAILS Unladen weight: approx. 1,500 kg Electrical connection Connection: 400 V Current consumption: 63 A Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1120 000155 3, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 12,000 rpm, Submitting a bid obligates you to collect the item by 16.01.2026! For loading, a complete semi-trailer with a height of 3 m is required. The consignment comprises 8 packages. Ijdpexywlzsfx Agzebf

Condition: ready for operation (used), Year of construction: 2005, operating hours: 64,218 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, TECHNICAL DETAILS Clamping force: 2,000 kN Screw diameter: 50 mm Tie bar distance: 520 mm Shot volume: 392 cm³ Injection pressure: 2,000 bar Mould height (h x v): 520 x 520 mm Platen size (h x v): 728 x 728 mm Minimum installation height: 250 mm Maximum platen opening: 900 mm Opening stroke: 650 mm MACHINE DETAILS Control system: Selogica Dimensions & Weight Machine dimensions (L x W x H): 5.45 m x 1.95 m x 2.1 m Total weight: 7,300 kg Operating hours: 64,218 h EQUIPMENT Screen language: German CEE socket 16A Hydraulic core pull 1x Pneumatic core pull 1x Air valve 1x Water battery Levelling elements EUROMAP 12 interface Interface for handling Schuko socket 10A Mould heating 12x Note: Machine is sold without material hopper. Iedpfxoxzfh Te Agzebf

Year of construction: 2018, condition: used, Make: COTEC, Model: HCS 100-I, Year of manufacture: 2018, Serial No.: 8918040022, Control system: Beckhoff, touch control panel, manual glass loading, working range approx. Ø 600 x 500 mm, drying, workpiece automation, safety devices, control and switch cabinets +++ Attention: This item is part of an online auction! +++ Isdpox Agwrefx Agzsbf

Year of construction: 2023, operating hours: 2 h, condition: used, machine/vehicle number: 5767/78631, Axle distance: approx. 40-175 mm, max. test piece diameter: approx. 200 mm, net weight: approx. 110 kg, adjustable measuring force: approx. 1-11 N, power consumption: approx. 0.2 kW, control/switch FRENCO, serial number: 30020-000147, various measuring accessories, 1 operating panel, single-track/single-door, 1 DELL flat screen, approx. 22 inches, year of manufacture: 2022 Ibedex Aklmjpfx Agzsf

Condition: used, Mitutoyo BHN 706 Co-ordinate Measuring Machine with Aberlink 3D Software, Deva Pendant Control, Servo Amplifier, Renishaw PH10T Plus Probe Head, PHC 10-3 Plus Controller, Granite Bed Area 1520mm x 940mm Between Columns including Probes & Clamping. S/No. N92090058 - 9005105102 Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Ibsdox Ahcpopfx Agzjf

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, The machine has been partially refurbished and is ready for immediate use! The clamping side has been completely refitted with new seals and two almost new tie bars have been installed! TECHNICAL DETAILS Clamping force: 1,100 kN Screw diameter: 40 mm Distance between columns: 470 mm Shot volume: 217 cm³ Ejector force: 22,000 N Ejector stroke: 150 mm Clear opening: 900 mm Injection pressure: 2,377 bar Opening stroke: 600 mm Platen length: 770 mm Platen width: 745 mm Minimum mould height: 300 mm Maximum daylight: 900 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,500 x 2,120 mm Total weight: 6,000 kg Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V Ibodpfexzfg Njx Agzjf EQUIPMENT Documentation / manual Display language: German CEE socket 16 A CEE socket 32 A Hydraulic core pull 2x Air valve, movable WAP Levelling elements EUROMAP 12 interface Schuko socket 10 A Note: The machine is sold without a material hopper and water battery.

Year of construction: 2021, condition: used, machine/vehicle number: 2150801, max. clamping length: approx. 60 cm, with darkening cabin Ijdpfxjx Akkcs Agzjbf

Condition: used, Year of construction: 1995, DEA Scirocco - 201310 Slant Bridge Technology Co-ordinate Measuring Machine with LK Metrology Camio CMM Software, Granite Bed Size 2880mm Long, 1360mm Between Column, 11+I2:I1350mm Under Z Axis Carriage, Renishaw PH10MQ Probe Head with Probes LK Joystick Operation. S/No. 00076 (1995) Isdjx Ag T Hspfx Agzjbf Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, injection pressure: 2,387 bar, TECHNICAL DETAILS Clamping force: 2,500 kN Injection pressure: 2,387 bar Screw diameter: 55 mm Tie bar spacing: 630 mm Shot volume: 570 cm³ Ejector force: 58,000 N Ejector stroke: 200 mm Opening stroke: 820 mm Mold size H x V: 630 x 630 mm Platen size H x V: 995 x 1,050 mm Minimum mold height: 330 mm Ibedpfx Agexzd R Tezef Maximum daylight: 1,150 mm MACHINE DETAILS Control system: MC5 Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,200 x 2,300 mm Total weight: 15,000 kg Input frequency: 50 Hz Input voltage: 400 V Operating hours: 54,872 h EQUIPMENT Documentation/manual 2x temperature control units for hot runner Screen text: German CEE socket 16A Accumulator for increased injection performance + ejector or core pull parallel operation Hydraulic core pull 1x Air valve 4x Material hopper Water manifold Leveling elements EUROMAP 12 interface EUROMAP 67 interface USB interface Schuko socket 10A Wear-resistant plasticizing unit Note: Machine is sold without handling unit.

Year of construction: 2023, operating hours: 3,635 h, condition: used, machine/vehicle number: 22260005, Max. workpiece diameter: approx. 200 mm, Number of spindles: 2, Number of tool stations: 12, Control unit: SIEMENS Sinumerik, 1 KUKA handheld control unit, Serial no.: 0062709, 1 chip conveyor, KNOLL 280 S-1/160, Year of manufacture: 2022, Serial no.: 1566310, Cooling unit: DELTATHERM RKV 5.5, Year of manufacture: 2022, Serial no.: 3-48097, Net weight: approx. 190 kg, Connected load: 400/460 V/50/60 Hz, 1 handling robot: KUKA Industrial Robot Cybertec-2 Series, Year of manufacture: 2022, Serial no.: 1306487, Net weight: approx. 282 kg, Payload: approx. 22 kg, 1 robot control unit: KUKA KR C5 Dualcap AC, Year of manufacture: 2022, Serial no.: 3131152, Connected load: 3 x 380-480 V, 50/60 Hz, 1 coolant filtration unit: KNOLL KF 150/950, Year of manufacture: 2022, Serial no.: 1566311, 1 air filtration unit: AFS 1100, Year of manufacture: 2021, Serial no.: 36957, Net weight: approx. 70 kg Ibedox Aklgspfx Agzef

Condition: ready for operation (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, TECHNICAL DETAILS Clamping force: 1,600 kN Screw diameter: 55 mm Tie bar spacing: 520 mm Injection pressure: 1,904 bar Mold dimensions (h x v): 520 x 470 mm Platen size (h x v): 710 x 660 mm Shot volume: 523 cm³ Ejector force: 33,000 N Ejector stroke: 150 mm Minimum mold height: 200 mm Maximum mold height: 600 mm Opening stroke: 1,050 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,600 x 2,300 mm Total weight: 10,900 kg Power supply type: Three-phase current Operating hours: 9,585 h EQUIPMENT Display language German CEE socket 16 A CEE socket 32 A Ibodpfsxzd Nvjx Agzef Accumulator for increased injection performance 3 freely programmable inputs and outputs each Core pull pneumatic 2x Water manifold Levelling elements Interface for dosing unit Interface for temperature control unit USB interface Schuko socket 10 A Low-wear plasticizing unit Tool heating 24x Note: Machine is sold without material hopper.

Year of construction: 2022, operating hours: 7,315 h, condition: used, machine/vehicle number: 100644, Max. grinding wheel diameter: approx. Ø 915 mm, max. workpiece diameter: approx. Ø 440 mm, max. workpiece weight: approx. 250 kg, max. grinding wheel speed: approx. 80 m/s, operating pressure: approx. 6 bar, control system, manufacturer: DANOBAT/SIEMENS/MARPOS, type: Sinumerik/P7, 1 automated workpiece removal station JOVI 1113B, year of manufacture: 2022, net weight: approx. 300 kg, 1 air filter unit IFS M 1600, year of manufacture: 2022, serial no.: 567663, net weight: approx. 85 kg, connected load: 380-460 V, 50/60 Hz, 0.7 kW, 1.5-2.1 A, 1 hydraulic unit REXROTH Depósito HE-16120, 1 coolant filtration unit MICRONFILTER Easy 250/KMT350, year of manufacture: 2022, serial no.: 0201, tank capacity: approx. 2,300 l, connected load: 400 V/50 Hz, 2.44 kW, 1 immersion cooler HASCH MCS-120ST-05AOP6R7S7UZ1-3405C, year of manufacture: 2022, serial no.: 1003220300954, net weight: approx. 206 kg, 1 magnetic separator MICRONFILTER KMT350, serial no.: 0211, 1 tool loading unit, DANOBAT rotary table lift, year of manufacture: 2022, serial no.: 3130490901, net weight: approx. 350 kg, max. payload: approx. 360 kg Iodpfxox Aklae Agzjbf

Condition: ready for operation (used), Year of construction: 2008, operating hours: 49,673 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, ejector force: 22,000 N, ejector stroke: 100 mm, Function-tested and immediately ready for operation by service for Krauss Maffei injection moulding machines! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 800 kN Screw diameter: 35 mm Tie bar spacing: 520 mm Shot volume: 154 cm³ Injection pressure: 2,429 bar Ejector force: 22,000 N Ejector stroke: 100 mm Platen length: 740 mm Platen width: 640 mm Mould mounting height: 300 mm Max. platen distance: 790 mm Tie bar dimensions (h x v): 520 x 420 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,350 x 1,700 x 2,000 mm Total weight: 6,500 kg Supply power type: three-phase current Input frequency: 50 Hz Ijdoxzd Ixepfx Agzsbf Operating hours: 49,673 h EQUIPMENT Documentation/Manual On-screen text in German CEE socket 16A 1x air valve Material hopper Water manifold Levelling elements EUROMAP 67 interface USB interface Schuko socket 10A Tool heating 24x

Year of construction: 2018, operating hours: 32,615 h, condition: used, machine/vehicle number: 710299, Travel ranges (X/Y): 37/25 cm, Weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool Monitor, KNOLL 320S-1/225 chip conveyor, Year of manufacture: 2018, Serial number: 1350024, HYDAC cooling unit, DSL Sigmatec 1 compressed air filtration system, YASKAWA YR-MH00012-A00 handling robot, Year of manufacture: 2018, Serial number: K17752-594-1, EGS Sumo Ecoplex Automation Benzinger automation system/workpiece storage, Year of manufacture: 2018, Serial number: 180102, double, 1 auxiliary table Isdpsx Akixefx Agzsbf

Year of construction: 2023, operating hours: 1,376 h, condition: used, machine/vehicle number: 180073, Swivel range: approx. 200 mm, machining length travel: approx. 100 mm, number of axes: 3 axes (X/Y/Z), SIEMENS Sinumerik control, IFS IFMC 1800 air filter unit, year of manufacture: 2021, serial no.: 565760-02, HYFRA E-Chilly 5-400V-S cooling unit, year of manufacture: 2022, serial no.: 10129303PC01240522, cooling capacity: approx. 5,480 m³/32° Celsius, LEHMANN UMT KSS0119 hydraulic unit, year of manufacture: 2022, net weight: approx. 610 kg, comprising: 1 HYFRA TRK-Chilly-45-EF-S cooling unit, year of manufacture: 2022, serial no.: 10132616PC01290722, 1 LEHMANN UMT FB100 chip conveyor, year of manufacture: 2022, serial no.: AUF007093-1, net weight: approx. 80 kg, 1 LEHMANN UMT VMA 100S GM WA magnetic unit, year of manufacture: 2022, serial no.: AUF007093-1, net weight: approx. 60 kg, 1 JOTKEL two-door steel cabinet, contents: various consumables. Iedpfsx Akkpsx Agzebf

Year of construction: 2021, operating hours: 5,475 h, condition: used, machine/vehicle number: 100000736, max. centre distance: 60 cm, max. grinding diameter: 44 cm, max. workpiece weight: 500 kg, control: SIEMENS Sinumerik/Balance Systems VM25, handling robot YASKAWA YR-1-06VXH12-A00, year of manufacture: 2022, serial number: 6V2272528290001, automation system/workpiece storage EGS Automation Danobat CG600-BL1, year of manufacture: 2023, serial number: 190605-6, 2-fold, filter 3FS M1600, no.: 565209, year of manufacture: 2021, weight: 85 kg, oil band filter MICROFILTER Easyband 150, serial number: 0202, year of manufacture: 2021, pump REXROTH HM-46, safety enclosure Isdpfox Akkiex Agzsbf

Year of construction: 2022, condition: used, machine/vehicle number: 710370, max. bar passage: approx. Ø 42 mm, max. bar length: approx. 800 mm, 12-position tool changer, tool holder: VDI 25, 1 compressed air filter unit DSL 02D-SF-Goring 2-MBL, nominal flow rate: approx. 900 m³/h, 1 cooling unit HYDAC RFCS-AH-030, year of construction: 2021, serial no.: 2300040370, 1 hydraulic unit KNOLL TG 30, year of construction: 2022, serial no.: 1570792, 1 hydraulic cooling unit BKW ET22V-134-B-DI, year of construction: 2022, serial no.: 834179, 1 chip conveyor KNOLL 320 S-1/225, year of construction: 2022, serial no.: 2204044, control: BENZINGER Ijdex Akkvopfx Agzsbf

Year of construction: 2022, operating hours: 2,737 h, condition: used, machine/vehicle number: 110000503, Grinding wheel speed: up to 120 m/s, workpiece weight: up to 80 kg, control system, manufacturer: SIEMENS/MARPOS, type: Sinumerik/P7, 1 automated workpiece unloading station, manufacturer: JOVI, type: 1113A, year of manufacture: 2022, net weight: approx. 300 kg, 1 air filter unit, manufacturer: IFS, type: VARIO M 2000, serial number: 568113, year of manufacture: 2022, net weight: approx. 120 kg, connected load: 400/460 V, 50/60 Hz, 0.7 kW, 1.7/1.6 A, 1 water cooling unit, manufacturer: HASCH, type: MCW-50CT-17AUZ1-3407C, serial number: 1001220302582, year of manufacture: 2022, net weight: approx. 150 kg, tank capacity: approx. 15 l, 1 coolant filtration system, manufacturer: MICRONFILTER, type: Easy 250/KMT350, serial number: 0201, year of manufacture: 2022, tank capacity: approx. 2,300 l, connected load: 400 V/50 Hz, 5.34 kW, 1 immersion cooler, manufacturer: HASCH, type: MCS-120ST-05AOP6R7S6UZ1-3407C, serial number: 1003220400836, year of manufacture: 2022, net weight: approx. 206 kg, 1 coolant tank, manufacturer: MICRONFILTER, type: VR200L/MIN-150L, serial number: 0201, year of manufacture: 2022, tank capacity: approx. 150 l, connected load: 400 V/50 Hz, 1.1 kW, 1 magnetic separator, manufacturer: MICRONFILTER, type: KMT350, serial number: 0212, 1 loading unit, manufacturer: DANOBAT, type: rotary table lift, serial number: 3810490908, year of manufacture: 2022, net weight: approx. 170 kg, max. load capacity: approx. 230 kg, 1 rotary table transport trolley Iodpsx Akk Nefx Agzsbf

Year of construction: 2018, operating hours: 34,879 h, condition: used, machine/vehicle number: 710298, Travel paths (X/Y): 37/25 cm, weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool-Monitor tool monitoring device, KNOLL 320S-1/225 chip conveyor, year of manufacture: 2018, serial number: 2074174, HYDAC chiller, compressed air filtration unit DSL Sigmatec 15, YASKAWA handling robot YR-MH00012-A00, serial number: K17731-034-1, year of manufacture: 2018, automation system/workpiece storage EGS Sumo Ecoplex Automation Benzinger, year of manufacture: 2018, serial number: 180101, double position, 1 side table Iodpfx Aex Akirjgzebf

Year of construction: 2018, operating hours: 28,658 h, condition: used, machine/vehicle number: 18E400239, Through-feed grinding, grinding range Ø: 10 cm, plunge grinding, grinding range Ø: 15 cm, weight: 9,000 kg, FANUC 0i-MF control, 2 handling robots YASKAWA YR-MH005LS-E000, serial numbers: R17507-979-3 / R19033-789-1, automation system/workpiece storage EGS Automation Tschudin, year of manufacture: 2018, serial number: 180100, 4-way, oil cooling and filtration system ARO, year of manufacture: 2018, serial number: PRA0032086, protective guard Ijdsx Aki Sjpfx Agzebf