Second-hand machinery for sale (2,359)

Condition: good (used), Functionality: fully functional, Year of construction: 2023, operating hours: 154 h, Technical data: Air flow at pressure: 7 bar - 21.2 m³/min; 8.6 - 19.7 m³/min; 10.3 - 18 m³/min Maximum pressure: 12 bar Caterpillar diesel engine with 146 kW output Tank capacity: 420L Fuel consumption at full load (L/h): 36,3L Connections: 2x G2 and 1x G3/4 Additional equipment: AFTERCOOLER - an additional cooler for after-cooling the compressed air Duoln T Ijumv D Nsqbot CYCLONE SEPARATOR - for separating condensate from the compressed air after cooling It is powered by a 6-cylinder Caterpillar engine with 146 kW. The M210 delivers an impressive 18 m³/min of compressed air at 10 bar. Even with a full fuel tank, the standard version weighs 3.7 tons, which makes it easier to transport as it is mounted on a two-axle chassis. Operating hours: 154 h CoC certificate for rapid approval: not available Warranty: 1 year (valid for Serbia, Croatia, Bosnia and Herzegovina, Montenegro, North Macedonia and Kosovo). Functional and in perfect condition!

Year of construction: 2022, operating hours: 0 h, Condition: new, Functionality: fully functional, Stockpile conveyor for direct feeding via crushing / screening plant. Machine is unused and new! TECHNICAL DETAILS stockpile capacity: up to 300 t/h with angle of repose 37°. Bulk density: 1,7kg/dm³ stockpile capacity (rotation 0°): 2500 t stockpile capacity (rotation 90°): 8500 t stockpile capacity (rotation 180°): 15000 t Dujln T Iqjpdqr Esbot Feed size: 0 / 200mm Conveyor belt length: 18252 mm (AA) conveyor belt width: 900 mm Discharge height: max. 8320 mm Rubber belt: 3 ply smooth including conveyor belt scraper track length: 2500mm plate width: 400mm Perkins diesel engine: 37kW own weight: approx. 8000kg FURTHER - Cable remote control for crawler - head piece hydraulically foldable - central lubrication point

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 130145-22, product height (max.): 200 mm, product height (min.): 50 mm, product length (max.): 80 mm, product length (min.): 25 mm, product width (max.): 80 mm, product width (min.): 25 mm, The original price was EUR 290,000 TECHNICAL DETAILS Machine type: Fully automatic horizontal cartoning machine Format size: 600 mm diameter Folding cartons per minute: 50 (assuming continuous product flow) Changeover time: 30 minutes Good production: > 99 % Work stations: 6 Number of folding carton formats: 5 Folding carton closure: Push-in closure (top and bottom) Format range A dimension: 25 - 80 mm B dimension: 25 - 80 mm H dimension: 50 - 200 mm Product feeding Method: Fast clip process Automatic feeding: For tubes into the synchronized feeding belt Feeding device: Indexed cassette conveyor (3,000 x 150 mm) Leaflet feeder: For pre-folded leaflets (AV + AH version) Process steps 1) Product transfer: Tubes are transferred from an upstream tube filling machine. 2) Transport: A conveyor system transports the tubes to a stepped storage area and pushes them into the product compartment of the indexed infeed conveyor. 3) Insertion: The infeed conveyor transports the tubes into the cartoning machine. 4) Package insert: Tube and package insert are pushed in together. 5) Package insert form: The package insert is folded into a U-shape and placed around the tube. Work stations within the cartoner Station 1: Removal of the folding carton from the magazine and erection in the format belt, folding of the rear side flaps. Station 2: Inserting the product and leaflet into the carton. Station 3: Folding the front side flaps and blind embossing the rear flap. Station 4: Closing the box. Station 5: Removing the folding carton from the format wheel. Station 6: Empty station for changing the format cassette. Duoln T Iqjvgw T Ajbjt Process steps after the cartoner Conveyor system: Folding cartons are conveyed out of the machine by a clamping conveyor system. Transport: The cartons are transferred to a flat conveyor belt (200 mm wide) by a pneumatic pusher. EQUIPMENT - Robust, rust-free construction with aluminum parts and stainless steel design - Safety equipment: All machine openings are protected with circuit breakers - Machines comply with the applicable CE directives. - Conveyor belts

Condition: repair required (used), Year of construction: 2007, Functionality: limited functionality, cutting force: 950 t, Necessary repair: 1x pump needs to be replaced TECHNICAL DETAILS Dslnsvm Amho T Iqbjut Diesel engine: Deutz

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC®, Space-saving 2D plasma cutting system MicroStep MasterCut Eco including software package TECHNICAL DETAILS Dolet E N D Hon T Iqbjut Plasma power source equipment: with automatic gas console and Contour Cut Working area: 3,000 x 1,500 mm Cutting torch: 2D plasma torch Machine control: MicroStep iMSNC® Software: MicroStep CAM software Asper Basic® Plasma power source: Kjellberg® HiFocus 161i Cutting range: max. 50 mm / recommended 0.5 - 38 mm Grooving thickness: max. 30 mm Infinitely adjustable: 10 - 160 A Cutting current: 10 - 160 A (100% ED) Marking current: 5 - 25 A (100% ED) Duty cycle: 100 % at 160 A Plasma gases: O2, N2, air, air, argon, hydrogen, forming gas F5, argon MACHINE DETAILS Installation dimensions without plasma source: approx. 2.6 x 5.0 m Installation dimensions including plasma source, control panel, control room: approx. 4.2 x 5.5 m Working temperature: +5 to +30 °C Humidity: max. 90 % (at 20° C) Input power: max. 6 kW (3/Ph.400 V, 50 Hz, 20 A) iMSNC control system Plasma source connection voltage: 400 V, 3 Ph, 50 Hz Fuse protection plasma source: T 50 A "C" Connected load plasma source: 28 kVA Plasma source dimensions: 985 x 570 x 1,185 mm Plasma source weight: 206 kg

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 4,500 rpm, No minimum price - guaranteed sale at the highest bid! Pick-up condition: Machine must be collected in week 44 - Bidder is obliged to collect the machine on time! Provision: free loaded (FCA) or own dismantling (EXW) possible Dismantling & loading costs are waived for EXW provision TECHNICAL DETAILS Control: TNC 430 HEIDENHAIN X-path: 2,500 mm Y-path: 1,000 mm Z-path: 1,250 mm Table clamping surface: 2,700 x 900 mm Spindle speed Speed: 4,500 1/min Dueln T Iqeuu Agmobot Tool holder: SK 50 Spindle motor: 20 kW MACHINE DETAILS Table load: 8 t Machine weight: approx. 16.5 t EQUIPMENT - CNC milling machine - Head 2-fold indexed milling head: 1°/2.5 - chip conveyor - no changer

Condition: like new (used), Year of construction: 2022, Lenght (transport): 9.02 m Height (transport): 3.45 m Width: 2.26 m Gross Weight (approx.): 9,026.5 Axle Weight (approx.): 8,119.3 kg Tongue Weight (approx.): 907.2 kg Engine: Volvo Horsepower: 174 kW Fuel Capacity (tank): 333 liters Hydraulic oil: 238.5 liters Infeed Opening: 58,4x134,6 cm Screen Area: 8,413 square cm Brakes: Electric Towing arrangement: Pintle hitch Tires: (4) 235-75R-17.5H Tracks: Optional - 308 Caterpillar Undercarriage EQUIPMENT HIGHLIGHTS Sloped infeed walls for improved visibility - Variable speed infeed system consisting of live floor equipped with slat chain - Removal bottom infeed clean-out door - Hydraulically operated debris containment door - Heavy-duty, pinned rotor complete with (18) hammers and (18) replaceable inserts - Dual belt discharge consisting of primary aggregate belt conveyor discharge onto a secondary stacking conveyor. - NACD 11.5" triple plate clutch - Independent adjustable drive belt tensioner - Single, side-load grate system made of AR450 steel available in multiple hole sizes and pattern The machine is like new and only 40 hours have been completed. It has been used as a test machine. The owner offers a 1000 hours warranty! The price includes transport within a radius of up to 1000 km! Doln T Ijtrf N Seqbjut

Year of construction: 2020, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: KE-TR6536-C-A-442, Stockpile conveyor for direct feeding via crushing / screening plant. TECHNICAL DETAILS stockpile capacity: up to 300 t/h at an angle of repose of 37°. Bulk density: 1,7kg/dm³ stockpile capacity (rotation 0°): 2500 t stockpile capacity (rotation 90°): 8500 t stockpile capacity (rotation 180°): 15000 t Feed size: 0 / 200mm Conveyor belt length: 18252 mm (AA) conveyor belt width: 900 mm Discharge height: max. 8320 mm Rubber belt: 3 ply smooth including conveyor belt scraper track length: 2500mm plate width: 400mm Perkins diesel engine: 37kW own weight: approx. 8000kg FURTHER - Cable remote control for crawler - head piece hydraulically foldable Dsln Tomv E Igo Iqbout - central lubrication point

Condition: ready for operation (used), Year of construction: 2016, operating hours: 10,035 h, Functionality: fully functional, machine/vehicle number: 63-N-2016-0003, working width: 1,500 mm, grinding height: 100 mm, grinding belt length: 1,540 mm, grinding belt width: 1,540 mm, No minimum price - guaranteed sale at the highest bid! Deburring module, spin module and contact module TECHNICAL DETAILS Dsln Toum Sp Is Iqbsut Working width: 1,500 mm Material thickness: 0.8 - 100 mm adjustable Sanding belt dimensions: 1,540 x 1,540 mm Power: 20 kW Feed rate: 500 - 4,000 mm/min Workpiece weight: max. 300 kg MACHINE DETAILS Weight: 5,600 kg Dimensions: 3,500 x 3,000 x 2,250 mm Power: 54 kW

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, SheetMaster: 1305 (shortened installation) SheetMaster equipment: Peel-off suction cup via suction cup 9, vacuum sensor system, central lubrication, sheet thickness gauge for double sheet control, TASC 100 control unit, suction cup plate module with vacuum sensor system TrumaGrip: with 400 mm scissor lift table TrumaGrip equipment: residual grid grippers with sensors TECHNICAL DETAILS Working range X / Y: 2535 / 1280 mm Cutting force: max. 220 kN Sheet thickness: max. 8 mm Active hold-down force: 4.5-20 kN (programmable in stages) Workpiece weight: max. 200 kg Control: Trumpf based on Siemens Sinumerik 840D Linear magazine: 18 tools with 3 clamps programmable part flap: max. part size 500 x 500 mm Stroke sequence punching E-1: 1200 1/min stroke sequence marking: approx. 2800 1/min Dsln T Ijtyapqjqbsut Acceleration (up to 100 kg sheet weight) X/Y/C: 20/10/350 m/s Tool change time single tool:

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2013, operating hours: 29,623 h, load capacity: 15,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,400 mm, fuel: diesel, TECHNICAL DETAILS Drive: Diesel Load capacity: 15,000 kg Load center of gravity: 600 mm Lifting height: 5,500 mm Free lift: 2,800 mm Dujln T Ijuh Ucljqbjt Mast type: Duplex Fork length: 1,400 mm MACHINE DETAILS Length: 4,850 mm Overall width: 2,550 mm Overall height: 4,400 mm Dead weight: 23,580 kg Front tires type: Superelastic Front tires Size: 12.00-20 Rear tires Type: Superelastic Rear tires Size: 12.00-20 EQUIPMENT - Sideshift - Tine adjuster - Heating system - Full cab - Full free lift

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: T33100-0636, Year of construction: 1996, operating hours: 21,419 h, load capacity: 16,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: standard, construction height: 3,650 mm, TECHNICAL DETAILS Machine type: Diesel forklift Load center: 900 mm Load capacity: 16,000 kg Mast and fork Mast type: Standard Lifting height: 3,700 mm Fork length: 2,180 mm Fork width: 350 mm Fork thickness: 75 mm Fork carriage width: 2,500 mm Tires Front tires type: Air Front tires size: 12.00-20 Rear tires Type: Air Rear tires Size: 12.00-20 MACHINE DETAILS Drive type: Diesel Overall length: 5,200 mm Overall width: 2,550 mm Overall height: 3,650 mm Net weight: 22,220 kg Duoloulyhpsn T Iqbet EQUIPMENT - Heating system - Full cabin

Condition: good (used), Year of construction: 2011, operating hours: 7,003 h, Functionality: fully functional, machine/vehicle number: 20111102, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, controller model: Fanuc A 100, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Control: Fanuc A100 Technology: Belt spindle Speed: 10,000 rpm Tool holder: SK40 Traverse path X: 800 mm Travel Y: 510 mm Z travel: 630 mm Tool magazine Tool magazine: 24 stations Tool holder: SK40 Tool change time: 2.5 s Chip to chip time: 5.5 s Tool weight: 7 kg Tool length: 250 mm Table and clamping Distance spindle to table: 100 - 730 mm Djln T Isu Dai Seqbeut Clamping surface: 950 x 510 mm Workpiece weight (max.): 500 kg T-slots: 3x 18 x 160 mm Rapid traverse Rapid traverse X: 30 m/min Rapid traverse Y: 30 m/min Rapid traverse Z: 30 m/min MACHINE DETAILS Weight: 6 tons Switch-on time: 33,641 h Spindle hours: 7,003 h Workpiece counter: 54254 EQUIPMENT - Chip screw - IKZ system with filter - Measuring probe, m&h IRP 25.10 - Electronic handwheel - Spindle cooler

Condition: good (used), Year of construction: 2007, operating hours: 24,287 h, Functionality: fully functional, machine/vehicle number: H-H5022, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, controller model: Ultimax, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS Control system: Hurco Ultimax X travel: 1,270 mm Y travel: 660 mm Z travel: 610 mm Dueln Teu Daire Iqbst Speed: 12,000 rpm Power: 15 kW Torque: 238 Nm Tool magazine Tool magazine: 40 stations Tool holder: SK40 Tool diameter: 75 mm Tool length: 300 mm Tool weight: 10 kg Table and clamping Clamping surface: 1,500 x 660 mm T-slots: 6x 18 x 1000 mm Table load (max.): 1,300 kg Spindle to table distance: 150 - 760 mm Rapid traverse Rapid traverse X: 30 m/min Rapid traverse Y: 30 m/min Rapid traverse Z: 20 m/min MACHINE DETAILS Dimensions: 3,250 x 2,350 x 2,950 mm Weight: 9 tons EQUIPMENT - Chip conveyor - IKZ system with filter and high pressure - Tool measurement: laser, BLUM - Interface measuring probe prepared - Electronic handwheel - Spindle cooler

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, pressing force: 110 t, working length: 2,550 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! TECHNICAL DETAILS Djln T Iqeulidyebsut Working length: 2,550 mm Control: DNC 94 PS Pressing force: 110 t

Year of construction: 1998, Condition: good (used), Functionality: fully functional, machine/vehicle number: 107856, new seals on hydraulic cylinders TECHNICAL DETAILS Duslol N Ufysn T Iqbet material length: 6050 mm sheet thickness: 6 mm (450 N/qmm) passage: 6050 mm upright projection: 100 mm Control system: ELGO P8721 number of support arms: 4 stop range (from cutting line): 10 - 1000 mm Adjustment speed: 70 mm/s MACHINE DETAILS machine length: 7000 mm machine width (without support arms): 2350 mm machine width with supporting arms: 3440 mm machine height: 2550 mm Machine weight: 21000 kg Oil tank. 300 l Connected load: 18 kW Material: aluminum 1,2 mm EQUIPMENT motorized backgauge 1 side stop sheet holding-up system

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2002, operating hours: 7,355 h, load capacity: 5,000 kg, lifting height: 5,950 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, fuel: electricity, TECHNICAL DETAILS Drive: electric Load capacity: 5000 kg Load center of gravity: 700 mm Lifting height: 5950 mm Free lift: 1900 mm Mast type: Triplex Fork carriage width: 1,250 mm Telescopic forks: 165 x 70 x 1,400 / 2,400 mm Platform height: 850 mm MACHINE DETAILS Length: 4500 mm Construction width: 2200 mm Overall height: 2860 mm Front tires type: Superelastic Front tires size: 27x10-12 Rear tires Type: Superelastic Rear tires Size: 27x10-12 Battery Volt: 80 V Charging capacity: 840 Ah Duolnotwdmuo T Iqbst Battery year of construction: 2015 EQUIPMENT - Fork positioner - Heating system - Full cab - Full free lift - loader

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2015, operating hours: 15,384 h, load capacity: 16,000 kg, lifting height: 4,610 mm, fuel type: diesel, mast type: standard, construction height: 3,160 mm, fork carriage width: 2,650 mm, total length: 5,520 mm, fuel: diesel, TECHNICAL DETAILS Load capacity: 16,000 kg Center of gravity: 1,200 mm Mast: Standard Mast height: 3,960 mm Lifting height: 4,610 mm Fork carriage width: 2650 mm Fork positioner: 700 / 2350 mm Forks: 350 x 75 x 1700 mm MACHINE DETAILS Engine: Diesel Weight: 24,140 kg Tires: Pneumatic 12.00-20 Length: 5,520 mm Width: 2,520 mm Forklift height: 3,160 mm Dujln T Iqetwphqjbst EQUIPMENT - Sideshift - Cabin - heater - Scales

Year of construction: 2003, Condition: good (used), Functionality: fully functional, Horizontal machining center with hydrostatic guides X, Y, Z for highest precision TECHNICAL DETAILS X-travel: 2000 mm Dujln T Iepdqrhsqbjt Y-way: 1250 mm Z-path: 1400 mm speed: 20 - 5.000 rpm torque: 750 Nm tool holder: HSK 100 control: SIEMENS 840D tool changing device: 60 positions Pallet size: 1250 x 1250 mm spindle: 20 kW rapid traverse X-Y-Z: 18 m/min table load: 3 / 5 t MACHINE DETAILS machine weight: approx. 15 t Space requirement: approx. 10.5 x 8.5 x 4.1 m EQUIPMENT NC rotary table 2-fold pallet storage Control panel for loading station IKZ 3D measuring probe Chip conveyor Packing for international transport is exclusive! EXW provision is also possible.

Condition: excellent (used), Year of construction: 2005, operating hours: 5,800 h, Functionality: fully functional, machine/vehicle number: 0-250-04-2333, travel distance X-axis: 3,310 mm, travel distance Y-axis: 1,735 mm, travel distance Z-axis: 220 mm, TECHNICAL DATA Table length: 2750 mm table width: 1050 mm Workpiece thickness: 100 mm X-axis: 3310 mm Y-axis: 1735 mm Z-axis: 220 mm Tool holder: HSK-F 63 Magazine: 8-position plate Unit: 2 spindles Drill: (6+4) x 32 X-axis speed: 60 m/min Y-axis speed: 50 m/min Z-axis speed: 20 m/min Standard compressed air quality: according to ISO 8573-1 quality class 3 Connection: R 1/2" Duoln Touh Uyqs Iqbet Pressure in the supply line: 7 bar Compressed air consumption: approx. 100-200 l/min Suction connection: Ø 200 mm Height: 2110 mm Total extraction capacity: min. 3170 m³/h Air speed: min. 28 m/s Pressure loss: min. 2000 Pa MACHINE DETAILS Loading dimensions: 5400 x 2300 x 2400 mm Machine weight approx.: 3600 kg Protection class: IP53 Operating voltage: 3 x 400 Volt, ±5% Frequency: 50 Hz External power supply: 32 A Recommended fuse: 35 A Total connected load approx.: 17.5 kW FUNDAMENT Surface pressure: in the area of the support points 1.2 N/mm² Floor covering: concrete quality B25, compressive strength ≥ 200 mm

Year of construction: 2008, Condition: good (used), Functionality: fully functional, Machine is provided free loaded. TECHNICAL DETAILS turning length over bed / saddle: 670 / 480 turning length: max. 750 mm turning diameter: max. 430 mm Bar diameter: max. 102 mm Duslnopgrzce T Iqbjt speed: 42 - 4200 rpm travel X / Z: 300 / 840 mm rapid traverse: 30 / 25 m/min spindle power cont. / 30 min: 30 / 22 kW spindle nose: ASA 11 tool holder: 12 places tool size: 25 x 25 mm / 40 mm tool speed: 45 / 6000 rpm MACHINE DETAILS weight: 6700 kg dimensions: 4500 x 1900 x 2320 mm EQUIPMENT Chip conveyor tool presetting automatic door opening high pressure pump. 6 bar drive tools and various static tools (see picture)

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 2287, drilling depth: 1,200 mm, feed length X-axis: 1,600 mm, feed length Y-axis: 560 mm, workpiece weight (max.): 5,000 kg, TECHNICAL DETAILS CNC control: Siemens Sinumerik 805M Drilling range Full drilling range (single-lip): Ø 3-30 mm Drilling range (single-lip drilling): Ø 40 mm Drilling depth (Z-axis): max. 1,200 mm Traverse paths Horizontal cross travel (X-axis): max. 1,600 mm Vertical travel (Y-axis): max. 560 mm Depth travel (Z-axis): max. 1,200 mm Horizontal longitudinal travel (W-axis): max. 500 mm Doln T Isu Td E Hjqbout Table width Table width: 1,200 mm Table length: 1,200 mm Table movement (Z-axis): max. 500 mm Table load: max. 50,000 N Workpiece weight: max. 5,000 kg

Condition: used, Functionality: fully functional, Year of construction: 2000, operating hours: 4,990 h, TECHNICAL DETAILS Length: 8000 mm Overall width: 2780 mm Overall height: 3320 mm Dead weight: 19000 kg Loading shovel width: 2800 mm Technical condition: poor Front tires type: Air Front tires size: 23 5-25 Rear tires Type: Air Dujln T Iotwn T Esqbet Rear tires Size: 23 5-25 EQUIPMENT Heating system Full cabin

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,630 mm, TECHNICAL DETAILS X-travel without gluing: 6,000 mm X-travel with gluing: 5,000 mm Y-travel: 1300 mm Y-travel with main spindle + tool diameter 20 mm: 1630 mm Duoln Tjuh Uxaj Iqbst Y-travel with gluing: 1450 mm Setup table: Dyna Poin BIMA 410 V Occupancy: 4 places Edge banding unit: available

Condition: good (used), Functionality: fully functional, Year of construction: 2005, operating hours: 22,793 h, load capacity: 6,000 kg, lifting height: 5,900 mm, fuel type: diesel, mast type: standard, construction height: 3,930 mm, fuel: diesel, TECHNICAL DETAILS Load capacity: 6000kg Load center: 600 Dueln T Iqetwn Hxebst Lifting height: 5900mm Length: 3300mm Overall width: 1900mm Overall height: 3930mm Dead weight: 10520kg Mast type: Standard Fork length: 1140mm Front tires type: Superelastic Front tires size: 355/65-15 Rear tires type: Superelastic