360° Slewing Cantilever Crane

AXA 0135

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. Klsdpfx Ajx Ein Ssbgsr - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Kedpfxskvnume Abgslr Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2002, Maximum jumbo roll width 1300 mm Jumbo roll diameter max 1000 mm (1200 mm without splice table) Winding diameter max 600 mm Operating speed 300 m/min Cutting width possible from 20 mm Year of manufacture 2002 Accessories: - 1 unwind tension shaft D 76 mm - 2 friction winding shafts D 76 mm - 10 upper and lower knives - 1 edge guiding system - 1 cutting table - 1 extraction system for edge trims - silicone-coated guide rollers, suitable for adhesive tapes Ksdpfx Absxyihnegjlr - with documentation

Condition: excellent (used), functionality: fully functional, power: 97 kW (131.88 HP), fuel type: diesel, Year of construction: 2016, operating hours: 4,710 h, Screening area lower deck: 1,525 x 4,575 mm (W x L) Kedpfxewxcwio Abgslr Hopper volume: 8 m³ Transport weight: 33,000 kg Transport dimensions: 15,330 x 2,900 x 3,395 mm (L x W x H) Screening area upper deck: 1,525 x 4,880 mm (W x L) Powerpack CAT C4.4 Emission Stage IIIB: Power 97.9 kW Fine material discharge conveyor (dimension / discharge height): 900 x 7,600 mm / 3,810 mm Oversize material discharge conveyor (dimensions / discharge height): 1,400 x 5,500 mm / 3,600 mm Medium fraction discharge conveyor (dimensions / discharge height): 900 x 7,600 mm / 3,360 mm Feeding capacity: up to approx. 400 t/h Feeding height: 3,580 mm Maximum feed size: 400 mm Drive concept: diesel-hydraulic Screening principle: double deck screen machine

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Technical data shown on pictures. Kjdpfeuxrv Hox Abgelr

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 10 cup wheels vertical glass edging machine with variable angle 0-45° actual running meters : 260.000 Klodpow U Dduefx Abgor min. glass size : 40 x 40 mm glass thikness : 3 - 55 mm speed : 0,4 - 6 m/min. voltage : 400 V 50 Hz 39 A weight : 4600 Kg

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Klsdpfxsphl Ece Abgjr Machine weight: 10 Ton

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Kjdpfx Asrqwbiebgolr Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V Kledpfxeg Ufvbj Abgor 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0 278 06 1192, film width: 700 mm, roll diameter: 700 mm, Used Friz rotary cutter. 1 set of blades has been resharpened. The machine is used and is sold without warranty. Inspection is possible and welcome. Kodpfov Radxex Abgolr Loading facilities available.