Hydraulic pump 500 bar

Bauknecht 500 bar

Year of construction: 1996, condition: good (used), machine/vehicle number: 96.01112.1496, Stationary high pressure pump unit Hammelmann HDP 112 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 300 bar Delivery rate: 153 l/min. Drive speed: 1500 rpm. Drive power: 90 kW with VEM motor 90 kW 3~motor, IP55, with pressure regulating valve, Lhjdpohtnnisfx Agzer with safety valve, with oil cooling system. dimensions LxWxH: ca. 2300x1000x1400 mm weight: approx. 1500 kg Year of manufacture: 1996 Condition: in good used condition.

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : Lhodpfx Agsu Dm E Hozsr On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Year of construction: 2016, condition: new, 1 piece reconditioned unused industrial bevel helical gearbox from ASUG. TGL 21815 All parts of the gearbox are renewed, except the housing !!! Claw coupling: 800 mm (only one half available) Maximum torque: 27.829 Nm Gear ratio: i= 1:80 max. power: 51 kW oil filling: 170 kg Speed: n1= 1400 Speed: n2= 17,5 weight: 1450 Kg Shaft diameter d1: 65mm Lhjdsgwlrdopfx Agzor Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925mm Length from base: 1170 mm !! Gearbox has no oil cooler !

Year of construction: 1995, condition: excellent (used), 3 units centrifugal pumps Sulzer MB 40-160/5 Flow rate: 32 m³/h Head: 147 m Max. temperature: 130°C Seal: Mechanical seal with barrier water Ledpfxod Sybpe Agzohr Drive power: Siemens 22 kW Speed: 2950 rpm ! Price per unit !

Condition: good (used), functionality: fully functional, motor manufacturer: VEM, power: 110 kW (149.56 HP), volume flow: 679 m³/h, Used ammonia compressor Sabroe TSMC - 116 S. Water cooled, well maintained, working condition, replaced because of new Sabroe compressor installation. Cooling capacity ~100kW (-20C). Controlled by Carell controller which can be included if requested. Motor 110kW. Some original parts also will be included. The compressor has been used in the production of fat/margarine. It normally operated at a suction pressure of 0.1–0.2 BAR, which resulted in an evaporating temperature (T₀) of -25°C and a condensing temperature (Tₖ) of +35°C, with a compressor capacity of approximately 100 kW. Lsdpfxjuq Hnyo Agzshr The compressor can also operate at a lower suction pressure to achieve lower temperatures, for example, between -30°C and -35°C.

Condition: like new (used), Manufacturer: Flender Type: K2S-2,5 Backstop: Yes Lhsdog Stz Aopfx Agzer Power: 78 kW Ratio: 44,16:1 RPM in/out: 1.400 / 31,7 Shaft ø in: 65 mm Shaft ø out: 140 mm

Year of construction: 1990, condition: used, Material: regular steel Driving force: 55 kW Dimensions: aaprox. L 1600 mm x W 1000 mm x H 900 mm Empty weight: approx. 1500 kg Flow rate: 14.4 m3/h Operating pressure: 100 bar Technical documentation: no Message: piston: 57mm, stroke rate: 326 rpm, stroke: 105mm Ledpfsgb D Irex Agzshr

Year of construction: 1989, condition: good (used), Good condition, with connection for sealing water. Lhjdpoc Iu Uiofx Agzor Head : 86 meter / 8,6 bar Flow rate : 600 m³/h Rotation speed: 1450 rpm Drive line: 190 Kw Can also be used as a turbine!

Year of construction: 1989, condition: ready for operation (used), High pressure pump ABEL PC57.1S Article no.: RE-HU-2019-1102-P51e Machine: High pressure pump Type: ABEL PC57.1S Ledpfed Hiwisx Agzjhr Mach.-Nr.: 12042E9 Capacity: 18 m3/h Pressure: 100 bar Motor: 75 kW

Condition: ready for operation (used), Power: 75kW, was used for milk products. Lhodpfx Aeiwf Uusgzjr