Binder FED 240 laboratory dryer

Binder FED 260

Year of construction: 2022, condition: ready for operation (used), Binder FED 260 Drying Oven Incubator Heating Oven Brooding Cabinet No. 1148 Set Temperature: 300°C Gsdpfxeyvug Rs Aa Ajir Dimensions (interior): 650mm × 515mm × 780mm (W x D x H) Dimensions (exterior): 810mm × 760mm × 940mm (W x D x H) Weight: approx. 84 kg Power: 2.30 kW Year of manufacture: 2022 You are welcome to arrange a viewing appointment. We can arrange affordable shipping for you upon request! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop to view more of our offers. All company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and are reserved.

Condition: excellent (used), White Type: WKL 34/60 Weiss air-cooled climate chamber Refrigerant converted to R-452A -60°C to 150°C Room volume: 34 liters Entry port installed in basic equipment: R1 NW 50 mm L1NW 120 mm Internal dimensions: Height 310 mm Width 324 mm Depth 300 mmm External dimensions: Height 1740 mm Width 630 mm Depth 970 mmm Characteristic values for temperature tests: Temperature range -60 to +150 °C Temperature differences in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 1 K ± 1 to ± 2 K Temperature deviation in space (corresponds to temperature gradient) 2 to 4 Temperature change rate (according to IEC 60068-3-5) Heating 2.5 K/min Cooling 3 K/min Heat compensation max. 550 W Characteristic values for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 %r.H. Temperature and humidity differences (in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 0.5 K Temperature deviation in space ± 0.5 to ± 1.5 (corresponds to temperature gradient) 1 to 3 Humidity fluctuation over time in the center of the usable space ± 3 to ± 5 %RH Data for operation: Test room lighting Halogen bulb 12V, 20W Nominal voltage 1/N / PE AC 230 V ± 10 % 50 Hz Rated power 2.5 kW Rated current 11 A On-site fuse 16A slow-blow Heat dissipation air-cooled test chambers Godpfx Ajtr Dinoa Asir Max. Heat dissipation to surroundings 1700 W Refrigerant: R-452A / R23 Weight: 140 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 1987, condition: good (used), Temperature chamber Temperature range: -70°C to +180°C Temperature change heating: 5.3 K / min Speed after cooling: 4.7 K / min Temperature deviation temporally in the middle of useful space: ±0.2K to ±0.5K Temperature homogeneity spatially related to setpoint: ±0.5K to ±1.5K Heat compensation: at +20°C approx. 350 W Power (kW): 1.5 / A 7.5 Sound pressure level: Approx. 55 dB (A) Gsdpfjhtrq Tex Aa Aoir Electric: Nominal voltage: 1 / N / PE AC230 V +/- 10% 50Hz Nominal output: Approx. 0.9 kW Nominal current: Approx. 6.0 A

Condition: as good as new (ex-display), Year of construction: 2025, Binder VDL 115 (2025) Laboratory Vacuum Chamber, Perfect Condition, Demonstration Machine Model: Binder VDL 115 Year of manufacture: 2025 Condition: As new – showroom/demonstration unit, after factory testing Capacity: 115 liters Power supply: 230 V Availability: Immediately Warranty: Yes, 2 years on spare parts (service available at additional cost) VAT Invoice: Yes Location: Grabina, 92-701 Poland Optional: Transport — Description: We offer for sale a Binder VDL 115 vacuum chamber, designed for drying organic solvents and flammable substances under vacuum conditions. This is a safety series VDL model compliant with ATEX requirements, suitable for use in explosion hazard areas (class 3). The unit was used exclusively for demonstration purposes – it is in perfect visual and technical condition, supplied with a full set of documentation. — Key Specifications: • Temperature range: from +9°C above ambient up to +200°C • Useful volume: 115 liters • Interior made of stainless steel (1.4571) – chemically resistant and easy to clean • Controlled, safe vacuum with adjustable levels • ATEX 2014/34/EU compliant, safety class 3 • LCD display control, programmable parameter adjustment Giedpfx Aaevq I Tno Asr • Standard: 2 aluminum shelves + inert gas valve — Applications: • Pharmaceutical and chemical industry • R&D laboratories • Drying solvents, non-reactive materials, and temperature-sensitive samples • Production of electronic and precision components — Why choose this? • Machine in flawless, as-new condition • No signs of use, inclusive of complete technical documentation • An ideal alternative to a new device – immediate availability, no lead time • Attractive price, possibility for on-site testing or remote demonstration

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Storage location: Supplier Gisdpjvvi Nnsfx Aa Ajr

Condition: used, Year of construction: 2006, machine/vehicle number: 2595119, Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle SKK 38203 (40)Baujahr / Year 2006 - SN. 2595119 Frequency 50 Hz Gisdpfxoiwu Ews Aa Ajr Speed 2900 min power required 4,20 kW inlet capacity 94/72 max. vacuum 420 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Carbolite CWF 11/5 Chamber Furnace 1100 °C Max Temp: 1100 °C With exhaust system and table Upward opening door keeps hot surface away from user Soft self-closing door (for 5, 13, 21 & 23 liter models) Standard start delay and process timer function Durable aluminum oxide support plates for the heating elements; sturdy door surround and base plate High quality fiber insulation with low thermal mass Powerful heating elements on both sides provide very good temperature homogeneity Godpfspygpfsx Aa Ajir Easy access to elements and controls simplify maintenance and servicing Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles new and used - you will find in our store! International shipping costs on request!

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 97 mm, total width: 440 mm, total height: 65 mm, total length: 1,550 mm, conveying length: 1,425 mm, construction width: 440 mm, construction height: 65 mm, working width: 395 mm, Item no.: 1000003711 Used light roller conveyor curve 45° not driven Technical data: Overall dimensions: approx. 1,550 x 440 x 65 mm (LxWxH) Width incl. cheek: 440 mm Cheek height: 60 mm Conveyor length: 1,425 mm Conveyor width: 395 mm Curve (degrees): 45° Curve radius, inside: 630 mm Curve radius, outside: 630 + 440 mm Roller type: Plastic Rollers per axle: 2 pieces Castor length: 195 mm Gedogqf U Dspfx Aa Asir Castor pitch, inside: 55 mm Roller pitch, outer: 97 mm Castor diameter: 50 mm Drive type: Gravity Special features: run-out piece, straight, roller spacing 125 mm, 3-4 rollers per axle Condition: Used / fully functional Function test: OK

Condition: excellent (used), Leybold Type: Trivac D 40 B The TRIVAC B are oil-sealed vacuum pumps based on the rotary vane principle. The oil injected into the pump chamber serves for sealing, lubrication and cooling. The pump body is made up of individual parts without sealing elements. These are pinned to ensure easy disassembly and assembly. Final pressure: 2 x 10⁻³ mbar Motor: 3-ph, 230/400 V, 50/60 Hz Suction capacity (50 Hz): 40 m³/h Suction capacity (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation Energy-saving Energy-saving: Low power consumption Low heat emission Modern vacuum technology: High suction capacity up to the final pressure Low final pressure, also with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, forced-lubricated plain bearings Godsvx Tduopfx Aa Asir Minimal air intake High leak tightness (4He capable) Technical data: Product: TRIVAC D 40 B Connection flange suction side: DN 40 ISO-KF Connection flange pressure side: DN 40 ISO-KF Nominal suction capacity at 50 Hz: 46.0 m3/h Nominal suction capacity at 60 Hz: 55.0 m3/h Suction capacity at 50 Hz: 40.0 m3/h Suction capacity at 60 Hz: 48.0 m3/h Final partial pressure without gas ballast: 1.0 x 10-4 mbar Final total pressure without gas ballast: < 2.0 x 10-3 mbar Final total pressure with gas ballast: < 5.0 x 10-3 mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Amount of operating fluid min.: 1.7 l max.: 2.6 l Noise level according to DIN 45 635 without gas ballast: 57 db(A) with gas ballast: 59 db(A) Mains connection: 3-ph, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-ph, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min-1 Motor speed at 60 Hz: 1,735 min -1 Motor protection type: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We can answer any further questions We will be happy to answer your questions over the phone.

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Gisdpfx Aewnm Uksa Aer Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.