Reach Truck

Bobcat BR16J-9

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump ##### Gkodpfx Afjt Uzits Aja RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Gedpfxjvcqy Us Af Aeka Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: used, Year of construction: 2003, machine/vehicle number: LC643, Used SIG CSD can filling line 30000 BPHTechnical Specifications & Performance DataThis used bottling line features industrial components engineered by Krones and SIG Simonazzi, suitable for second hand industrial packaging and beverage production environments. Verified data plates provide key technical values to support integration and qualification.Year of construction: 2003Electrical supply: 400 V, 3-phaseFrequency: 50 HzRated current: 37 AShort-circuit rating (ICW/ICU): 1.26 kAPressure vessel volume: 504 litersTest pressure (PT): 11.44 barAllowable temperature range (TS): -4 °C to 50 °CCompliance: CE 0036Manufacturers: Krones, SIG SimonazziAdvanced Automation & Control SystemsThe line incorporates an industrial-grade power and control architecture designed for reliable 24/7 operation in beverage packaging. Three-phase power distribution at 400 V and 50 Hz supports stable performance of key units, with a 37 A rated current on the main controlled section referenced. Protective coordination and short-circuit withstand ratings (ICW/ICU) are identified to 1.26 kA, aligning with robust switchgear and control cabinet design. Operator interfaces, interlocks, and modular controls can be paired with upstream/downstream equipment to streamline changeovers and routine operation.Production Line Integration CapabilitiesEngineered for seamless integration into complete packaging lines, the equipment accommodates conventional upstream and downstream modules such as rinsing, filling, capping, labeling, conveying, inspection, and end-of-line packaging. The documented pressure vessel capacity (504 liters) supports process stability for buffer or service functions within a bottling layout. Modular connectivity enables inline operation with standard conveyor systems and synchronizes with typical line controls used in beverage production.Machine Condition & Maintenance HistoryThe components carry CE markings and documented nameplate data confirming construction year and key safety/pressure parameters. Industrial construction by Krones and SIG Simonazzi is indicative of long service life and high reliability when maintained according to OEM guidelines. Actual runtime, service records, and overhauls should be verified during inspection to align with targeted performance and validation requirements.Operational Performance & VersatilityThis second hand bottling equipment is suitable for a wide range of industrial packaging applications in beverage production. The pressure-rated vessel supports stable process conditions, while the electrical configuration is appropriate for common European plant utilities. The line can be configured with compatible modules to match target output, quality controls, and packaging formats as required by the specific production program.Installation Requirements & Site PreparationInstallation requires 400 V, 3-phase, 50 Hz power. Site preparation should consider adequate space for line layout, access for operation and maintenance, and routing for utilities such... Gkodpfx Aoziy Auof Aoa

Condition: used, Year of construction: 2004, Overview The Solo Screw Capper was manufactured in 2004 by the German engineering company Dr. Datz. The machine can process aluminum screw caps. It was used in a bottling line of a mineral water company. The line mainly used for contract bottling and was now stopped, to be sold in parts. Technical Specifications: - Number of closing elements: 8 - Capacity: up to 20.000 bph - Cap type: 28mm aluminum screw cap - Working direction from left to right - Format: 0,7l GDB bottle Gsdpfx Afexrfzho Ajka

Condition: used, Consisting of: - Rinser 20 nozzles  - Filler 20 valves Gsdpfoxytwtsx Af Aska - Natural corker for 3 heads  - Screw capper for3 heads 28x32 MCA Capacity: 3500 bph

Condition: used, Year of construction: 1995, A flash pasteurisation plant with a plate heat exchanger for heating 200 hl/h of beverage from 3 °C to 74 °C. Gkodpjzizt Iofx Af Aea Additional title: inline pasteurisation plant Capacity: 20000 l/h Material: stainless steel Features: Plate heat exchanger; control cabinet with digital control panel

Condition: used, Year of construction: 2004, machine/vehicle number: PST35, Used APV N35 Plate pasteurizer 10000LhTechnical Specifications & Performance DataThe APV Products N35 is a plate pasteurizer engineered for high-efficiency thermal treatment of liquid food and beverage products. Built in 2004, this second hand system offers a compact, hygienic solution for beverage production and industrial packaging processes where consistent heat transfer and reliable performance are essential. Previously operated on whey in a dairy environment, it is now dismantled and ready for integration into a used bottling line or processing plant.Manufacturer: APV ProductsModel: N35Year: 2004Type: Plate pasteurizer (plate heat exchanger design)Nominal capacity: 10,000 l/hHeat transfer surface: 56.35 m²Working pressure: 10.0 barPrevious application: Whey (dairy processing)Advanced Automation & Control SystemsThe N35 plate pasteurizer architecture supports modern automation strategies. Typical configurations include temperature control loops, flow regulation, and safety interlocks to maintain stable pasteurization temperatures and hold times. The system layout facilitates integration with common PLC/HMI platforms used in beverage production, enabling recipe control, trend logging, and alarm management. Operator-friendly interfaces allow fast start-up, monitoring, and shutdown routines, while sanitary design supports rigorous hygiene requirements.Production Line Integration CapabilitiesThis flash-style thermal unit fits upstream of filling and packaging operations across a wide range of process layouts. It can be paired with balance tanks, deaeration, homogenization, and inline filtration, and can feed fillers serving PET or glass bottling operations in a used bottling line. Its compact footprint makes it suitable for both standalone processing cells and fully integrated beverage production lines. Format changes are process-driven (flow/temperature parameters) rather than container-driven, enabling multi-product flexibility for water-based and dairy-derived liquids.Machine Condition & Maintenance HistoryThe unit was previously operating on whey in a dairy plant. It has been professionally dismantled and is ready for collection and installation at a new site. Its condition supports recommissioning after standard installation, utility connection, and validation procedures typical for second hand processing equipment.Operational Performance & VersatilityThe APV Products N35 plate pasteurizer provides efficient heat recovery and stable thermal profiles for continuous processing. The plate heat exchanger design is well-suited for clear and low-to-medium viscosity liquids found in beverage and dairy processing. It aligns with industrial packaging requirements where consistent microbiological stability, product quality, and throughput are priorities. The 10,000 l/h nominal capacity makes it a solid choice for mid-scale beverage production environments seeking reliable performance.Installation Requirements & Site PreparationSite readiness typically includes utilities for heating and cooling media, process water, and drain connection... Godpfx Asznvdref Aeka

Condition: used, Year of construction: 2022, machine/vehicle number: LC653, Used Micro can CL10 filling line 4000 Cans per hourTechnical Specifications & Performance DataThis complete automatic canning line is a compact, engineered for efficient beverage production in aluminum cans. Manufactured by Micro Can, it integrates key bottling equipment into a cohesive, space-efficient unit suitable for industrial packaging environments. As a second hand, used bottling line, it offers proven reliability and excellent value for expanding or optimizing production.Line type: Complete automatic canning lineManufacturer: Micro CanMain module: Micro Can CL10 filler/seamerRated output: 4,000 cans per hourContainers: Aluminum cansFormats: Standard 0.33ml and 0.44mlFilling type: gravityAdvanced Automation & Control SystemsThe line is designed for streamlined operation with integrated control and coordinated infeed/outfeed logic between the depalletizer, filler/seamer, and labeling machine. Quick setup and simple recipe changes support efficient format adjustments. Operator-friendly controls, interlocked guards, and emergency stops provide safe, intuitive handling during routine operation and maintenance. The configuration minimizes interface risks and ensures stable synchronization across the complete packaging process.Production Line Integration CapabilitiesOptimized for inline operation, this second hand canning line connects upstream depalletizing to downstream labeling with harmonized conveyor handling. It is suitable for beverage production expansions, pilot facilities, or as a dedicated canning cell within a larger packaging plant. Designed for aluminum cans, it can be interfaced with upstream processing and downstream secondary packaging equipment as needed.Machine TypeManufacturer/ModelYearDepalletizerFilling MonoblockMicro Can CL10Labeling MachineWrap-around labellerMachine Condition & Maintenance HistoryThe line is offered as a complete, ready-to-operate unit. As a used bottling line, it has been configured for immediate deployment in industrial packaging environments, subject to standard site preparation and utilities. Overall condition is consistent with a professionally integrated second hand canning line built for dependable daily operation.Operational Performance & VersatilityWith a rated output of 4,000 cans per hour, the Micro Can CL10 filler/seamer delivers stable filling and precise seaming performance. The wrap-around labeling machine supports continuous production with consistent label application, and the depal... Gedpfx Afezkhtqo Aoka

Condition: used, Year of construction: 2019, Overview This Clever Machines S.r.l. GS 307 is a rotary shrink-sleeve label applicator, built in 2019 and supplied as a complete line together with an STJ3 steam shrink tunnel. It applies partial or full-body shrink-sleeve labels to PET bottles. A single-head sleeve feeding and cutting unit sits over a rotary star-wheel carousel, with the steam-powered STJ3 tunnel shrinking the sleeves downstream. The control system is a modern Allen-Bradley / Rockwell architecture (PowerFlex 525 drives, Kinetix 5500 servo drives and an Allen-Bradley PLC). The line is set up for 500, 1,000 and 1,500 ml PET formats. Technical data - Manufacturer: Clever Machines S.r.l. - Model: GS 307 (line: GS 307 applicator + STJ3 steam shrink tunnel) - Year of manufacture: 2019 - Machine type: rotary shrink-sleeve label applicator with steam shrink tunnel - Applicator: single-head sleeve feeding and cutting system - Capacity: 12,000 containers/h (manufacturer-rated per OEM technical data); seller reports production speeds up to 15,000 bph - Bottle formats: 500 / 1,000 / 1,500 ml PET - Bottle diameter: up to 120 mm - Sleeve-label height: 40 - 350 mm - Application: partial or full-body sleeve labels - Control: Allen-Bradley / Rockwell (PowerFlex 525 drives, Kinetix 5500 servos, PLC) - Power supply: 400 V, 50 Hz, 3-phase; approx. 10 kW installed; 20 A; Icc 10 kA; IP 55 - Compressed air: 6 bar min, approx. 150 l/min (approx. 70 m³/h) - Working height: 1,300 mm - Weight: approx. 1,800 kg Equipment - Clever GS 307 single-head sleeve label applicator - STJ3 steam shrink tunnel Gkedpfozk U E Tex Af Aoa - Format / change parts for 500 / 1,000 / 1,500 ml PET bottles - OEM technical documentation Condition Used. Photographs show a clean, well-maintained stainless-steel machine with modern controls and normal signs of production use. The seller reports the machine as being in excellent condition with approximately 3,000 operating hours, dismantled and stored following the end of its private-label production. Availability Immediately available. Location: Italy. The machine is dismantled and stored, ready for loading; preparation, dismantling and truck loading by the seller (EXW loaded). Inspection on request.

Condition: used, "Cleaning-in-place" system consisting of 4 vertical stainless steel tanks for acid, fresh water, alkaline solution, and rinsing water. Most recently used for cleaning a filter room. The system is heated via a heat exchanger using steam. The feed pump circulates the media through the process. Machine (additional information): 4-tank system with feed pump and heat exchanger. Material: Stainless steel Gkodpfx Aozi Ampef Aoa Location/Position: Tanks standing on pipe supports. Basic design: Cylindrical, open tanks with hinged lids. Equipment: 4 x CIP tanks; feed pump; heat exchanger; control cabinet with digital control panel; various pipes and valves.