FB 44269

BOGE

Year of construction: 2007, condition: used, Screw compressor with refrigeration dryer - Manufacturer: Boge - Model: C9 - Year of manufacture: 2007 - Max. pressure: 8 bar Todpfx Ajz Hm Rkedwoc - Max. air flow: 1,180 m³/min. - Motor power: 7.5 kW - Width x depth x height: 480 x 987 x 1,234 mm - Volts/Hz: 400/50 - Weight: 210 kg Refrigerated dryer - Boge Ultratroc - Type. SD 0050 AP - max. 16bar - Location: Warehouse, D-32825 Blomberg

Condition: ready for operation (used), Year of construction: 2005, A total of five identical Vestas wind turbines are expected to be available from early 2027. Rated power: 850kW, rotor area: 2124m², rotor blades: 3, rated speed: 26rpm, generator voltage: 690V, gearbox stages: 3, cut-in wind speed: 4m/s, rated wind speed: 16m/s, cut-out wind speed: 25m/s, tower material: steel, hub height: 74m, nacelle weight: 22t, rotor weight: 10t. Documentation available. An on-site inspection is possible. Individual sale possible. Tsdpfoywlpxox Adwjc

Condition: good (used), Year of construction: 2015, 0,728 m³/min 0 10 bar engine output 5,5 kW turning speeds 3.000 U/min dimensions 2,0 x 0,8 x 1,35 m weight 400 kg Power-On hours = 7,340 h. Todpfxez Hfake Adwjc -BOGE ??screw compressor -BOGE ??energy-saving refrigerated compressed air dryer DS9 -BOGE ??automatic condensate drain -BOGE ??compressed air receiver with 500 l capacity.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 0 h, PROD. BOGE Tsdpfxez E Hhtj Adwsc TYPE SD40 S/N 31412 YEAR 1999 POWER (kW) 30+1.10 CAPACITY (m3/min) 4.30 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 17000 / 51100 FREQUENCY CONVERTER no BUILT-IN DRYER yes HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Tsdpfew Rm Saex Adwsc Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: excellent (used), Year of construction: 2014, S015901 PROD. BOGE TYPE SLF101-1 S/N 5077884 YEAR 2014 POWER (kW) 90 CAPACITY (m3/min) 4.94-12.25 PRESSURE (bar) 10 Todpjz Eakzsfx Adwjc HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: used, Year of construction: 2014, operating hours: 14,938 h, functionality: fully functional, power: 11 kW (14.96 HP), volume flow: 104.4 m³/h, pressure (max.): 8 bar, type of cooling: air, Screw compressor Boge C15F Inverter integrated 11 kW Tjdpfx Ajztrt Tjdwec 8 bar 1.74 m3/min Year of manufacture: 2014 Operating hours: 14,938

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm Todedx Ryyspfx Adwjc coil outside diam.: max. 1.100 mm coil hight: max. 800 mm

Condition: excellent (used), Year of construction: 2015, Refrigeration dryer BOGE DS 95 Todpfsk Nb T Dox Adwjc Capacity 9.5 m3/min year of manufacture 2015, THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: excellent (used), S015019 PROD. BOGE TYPE C25 FD S/N 5068559 YEAR 2013 POWER (kW) 18.5 + 0.75kW CAPACITY (m3/min) 3.10 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 34833 FREQUENCY CONVERTER yes BUILT-IN DRYER yes HEAT EXCHANGER yes Tsdjz Dwd Nopfx Adwec COOLED BY (AIR/WATER) air/water ON TANK no DOCUMENTS no NEW/USED USED

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm Tjdpoxbtvfsfx Adwsc - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven

Condition: used, Compressed air adsorption dryer, activated carbon adsorber with post-filter BOGE type DAZ 5-2 Tsdpfevrkhkex Adwoc For particularly dry air Manufacturer no. 38315449 Year of manufacture 2013 Volume flow max. 250 liters/min. = 15 m³/h Operating pressure max. 16 bar Connection thread G 1/4“ Mains connection 230 volts, 50 Hz - Pre- and post-filter Space requirement L x W x H 400 x 210 x 580 mm Weight 15 kg good condition

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), type of cooling: water, Equipment: documentation/manual, type plate available, New Boge S 75-4 LF screw compressor, 5/2026, for sale due to a project being cancelled (new value €50,000), now €20,000. Please note: this is a water-cooled machine. Tjdpfx Ajz Dpu Hsdwoc

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Tsdpfxeh Nypfs Adwec

Condition: used, Year of construction: 2005, feed pressure 10 bar liter capacity 2,66 m³ / min Tjdpovuz Rhsfx Adwec total power requirement 18,5 kW motor speeds: 3000 min/1 dimensions 1200 x 900 x 1200 mm weight of the machine ca. 150 kg